|
IDENTIFICATION DIVISION.
PROGRAM-ID. XTS766.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "XTS766.SCO") calling SQL
* procedures in file "XTS766.MCO".
*Copyright 1995 National Computing Centre Limited
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* XTS766.SCO
* WRITTEN BY: Nickos Backalidis
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* Drop character set no granted privileges
*
* REFERENCES
* 11.29 -- <Drop character set statement>
* TC#1 11.29
* 11.29 AR.1
* 11.29 SR.3
* 21.2.12 -- USAGE_PRIVILEGES view
* 21.3.22 -- USAGE_PRIVILEGES base table
* F#23 -- Privilege Tables
* F#2 -- Basic Information Schema
* F#45 -- Character set definition.
*
* DATE LAST ALTERED 18/12/95 CTS5 Hand-over Test
*
* Cleanups and fixes by V. Kogakis 18/12/95
* Print timestamp
* Include Files
* Define NOSUBCLASS/CHCKOK at test beginning
*
* QA STATUS : QA CHECK
*
* Revised by DWF 1996-02-23
* Shortened variable names to 6 chars
* Removed field widths from printfs
* Fixed SDL transactions
* Corrected printout
* Fixed SQL syntax errors
* Fixed bad schema references
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 gtor PIC X(128).
01 gtee PIC X(128).
01 objsch PIC X(128).
01 objnam PIC X(128).
01 objtyp PIC X(128).
01 coun PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Module COBOL, xts766.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7066 *******************
MOVE 1 TO flag
DISPLAY " TEST7066"
DISPLAY " Drop character set no granted privileges "
DISPLAY " References:"
DISPLAY " 11.29 -- "
DISPLAY " TC#1 11.29 "
DISPLAY " 11.29 SR.3 "
DISPLAY " 21.2.12 -- USAGE_PRIVILEGES view "
DISPLAY " 21.3.22 -- USAGE_PRIVILEGES base table "
DISPLAY " F#23 -- Privilege Tables "
DISPLAY " F#2 -- Basic Information Schema "
DISPLAY " F#45 -- Character set definition. "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
*Initialise error reporting variables
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*create a character set under the current schema
DISPLAY "CREATE CHARACTER SET TESTSET GET SQL_TEXT;"
* EXEC SQL CREATE CHARACTER SET TESTSET GET SQL_TEXT;
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*access the USAGE_PRIVILEGES view from the Information
*and ensure that the character set is visible
DISPLAY "SELECT GRANTOR, GRANTEE, OBJECT_SCHEMA,
- " OBJECT_NAME, OBJECT_TYPE"
DISPLAY "INTO :gtor, :gtee ,:objsch, :objnam, :objtyp "
DISPLAY "FROM INFORMATION_SCHEMA.USAGE_PRIVILEGES "
DISPLAY "WHERE OBJECT_TYPE = 'CHARACTER SET'"
DISPLAY "AND OBJECT_NAME = 'TESTSET';"
*intialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxx" TO gtor
MOVE "xxxxxxxxxxxxxxxxxxxx" TO gtee
MOVE "xxxxxxxxxxxxxxxxxxxx" TO objsch
MOVE "xxxxxxxxxxxxxxxxxxxx" TO objnam
MOVE "xxxxxxxxxxxxxxxxxxxx" TO objtyp
* EXEC SQL SELECT GRANTOR, GRANTEE, OBJECT_SCHEMA,
* OBJECT_NAME, OBJECT_TYPE
* INTO :gtor, :gtee ,:objsch, :objnam, :objtyp
* FROM INFORMATION_SCHEMA.USAGE_PRIVILEGES
* WHERE OBJECT_TYPE = 'CHARACTER SET'
* AND OBJECT_NAME = 'TESTSET';
CALL "SUB5" USING SQLCODE SQLSTATE gtor gtee objsch objnam
objtyp
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "GRANTOR should be _SYSTEM; its value
- " is ", gtor
DISPLAY "GRANTEE should be CTS1; its value
- " is ", gtee
DISPLAY "OBJECT_SCHEMA should be CTS1; its value
- " is ", objsch
DISPLAY "OBJECT_TYPE should be CHARACTER SET; its value
- " is ", objtyp
DISPLAY "OBJECT_NAME should be TESTSET; its value
- " is ", objnam
if (gtor NOT = "_SYSTEM" OR gtee NOT = "CTS1")
then
MOVE 0 TO flag
END-IF
if (objsch NOT = "CTS1" OR objtyp NOT =
"CHARACTER SET") then
MOVE 0 TO flag
END-IF
if (objnam NOT = "TESTSET") then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*now drop the character set
*11.29 drop character set does NOT get a drop behavior!
*It's always restrict (see SR.3 in TC)
DISPLAY "DROP CHARACTER SET TESTSET;"
* EXEC SQL DROP CHARACTER SET TESTSET;
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 1 TO coun
*now access the character sets view and check that
*no data will be returned for CTS1 & TESTSET
DISPLAY "SELECT COUNT(*) INTO :coun"
DISPLAY " FROM INFORMATION_SCHEMA.CHARACTER_SETS "
DISPLAY " WHERE CHARACTER_SET_SCHEMA = 'CTS1'"
DISPLAY " AND CHARACTER_SET_NAME = 'TESTSET';"
* EXEC SQL SELECT COUNT(*) INTO :coun
* FROM INFORMATION_SCHEMA.CHARACTER_SETS
* WHERE CHARACTER_SET_SCHEMA = 'CTS1'
* AND CHARACTER_SET_NAME = 'TESTSET';
CALL "SUB9" USING SQLCODE SQLSTATE coun
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "coun should be 0; its value is ", coun
if (coun NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*now record results
if ( flag = 1 ) then
DISPLAY " xts766.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7066','pass','MCO');
CALL "SUB11" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " xts766.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7066','fail','MCO');
CALL "SUB12" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "========================================"
* EXEC SQL COMMIT WORK;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7066 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
[ zur Elbe Produktseite wechseln0.27Quellennavigators
Analyse erneut starten
]
|
