Gedichte Musik Bilder Quellcodebibliothek Diashow Normaldarstellung
products/sources/formale sprachen/Cobol/Test-Suite/SQL M/  image not shown  

Quellcode-Bibliothek

© Kompilation durch diese Firma

[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]

Datei: yts780.cob   Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  YTS780.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.


      * Standard COBOL (file "YTS780.SCO") calling SQL
      * procedures in file "YTS780.MCO".


      *Copyright 1996 National Computing Centre Ltd, 
      *and Computer Logic R&D S.A 
      *on behalf of CTS5 SQL2 Project. 
      *All rights reserved.                                          
      *The CTS5 SQL2 Project is sponsored by the European Community. 
      *                                                             
      *The National Computing Centre Limited and Computer Logic R&D  
      *have given permission to NIST to distribute this program      
      *over the World Wide Web in order to promote SQL standards.    
      *DISCLAIMER:                                                   
      *This program was reviewed by employees of NIST for            
      *conformance to the SQL standards.                             
      *NIST assumes no responsibility for any party's use of         
      *this program.                                                 


      ****************************************************************
      *                                                              
      *                 COMMENT SECTION                              
      *                                                              
      * SQL VALIDATION TEST SUITE V6.0                               
      *                                                              
      * YTS780.SCO                                                   
      * WRITTEN BY:  Susan Watters                                   
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *                                                              
      * This routine tests <time zone interval> in literal           
      *                                                              
      *                                                              
      * REFERENCES                                                   
      *   5.3    F.30                                                
      *   5.3    SR.16                                               
      *   5.3    GR.8                                                
      *   6.1    SR.27                                               
      *   6.1    GR.5                                                
      *   6.4    SR.6  <column reference>                            
      *   6.4    SR.7                                                
      *   6.4    GR.2                                                
      *   6.6    GR.3  <extract expression>                          
      *   6.14   GR.4  <datetime value expression>                   
      *   8.3          <between predicate>                           
      *   F#41   Time zone specification                             
      *   F#5    DATETIME data types                                 
      *                                                              
      * DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test               
      * 24/10/95 Structure of table inserts corrected                
      * Inserts to TTIME and TTIME2 separated to ensure no problem   
      * with primary key PK                                          
      * 2/1/96 CAST statement added                                  
      * Compilicated IF loop removed                                 
      * derived table replaced                                       
      *                                                              
      * QA Status: Full FC                                           
      *                                                              
      * Revised by DWF 1996-03-18                                    
      *   Added rollback after authid                                
      *   Removed EXEC SQL from printf                               
      *   Removed huge chunks of code that required TIME and TIME    
      *     WITH TIME ZONE to be the "same" data type -- this is a   
      *     debatable issue                                          
      *   Fixed expected results                                     
      *   Sort-of added a subtest                                    
      ****************************************************************




      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  id PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  uthr PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  utmin PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  lochr PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  locmin PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration 
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.
             MOVE "CTS1 " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB2" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Module COBOL, yts780.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST7560 *******************
             MOVE 1 TO flag

             DISPLAY " TEST7560 "
             DISPLAY "
             DISPLAY "References:"
             DISPLAY " 5.3 F.30"
             DISPLAY " 5.3 SR.16"
             DISPLAY " 5.3 GR.8"
             DISPLAY " 6.1 SR.27"
             DISPLAY " 6.1 GR.5"
             DISPLAY " 6.4 SR.6 "
             DISPLAY " 6.4 SR.7"
             DISPLAY " 6.4 GR.2"
             DISPLAY " 6.6 GR.3 "
             DISPLAY " 6.14 GR.4 "
             DISPLAY " 8.3 "
             DISPLAY " F#41 Time zone specification."
             DISPLAY " F#5 DATETIME data types."
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *prepare the database for the test 
             DISPLAY "DELETE FROM TTIME_BASE;"
      *  EXEC SQL DELETE FROM TTIME_BASE;
             CALL "SUB3" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *Populate TTIME2 with values 
             DISPLAY "INSERT INTO TTIME2 "
             DISPLAY "VALUES (4, TIME '12:00:00-07:35',"
             DISPLAY "TIMESTAMP '1995-12-25 12:00:00-07:35'); "
      *  EXEC SQL INSERT INTO TTIME2 
      *    VALUES (4, TIME '12:00:00-07:35',TIMESTAMP '1995-12-25
      *  12:00:00-07:35');
             CALL "SUB4" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO TTIME2"
             DISPLAY "VALUES (5, TIME '10:00:00-09:40',"
             DISPLAY "TIMESTAMP '2000-01-01 00:00:00-12:32'); "
      *  EXEC SQL INSERT INTO TTIME2
      *    VALUES (5, TIME '10:00:00-09:40',TIMESTAMP '2000-01-01
      *  00:00:00-12:32');
             CALL "SUB5" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO TTIME2"
             DISPLAY "VALUES (2, TIME '00:10:00+08:38',"
             DISPLAY "TIMESTAMP '1984-12-07 19:56:32+08:29');"
      *  EXEC SQL INSERT INTO TTIME2
      *    VALUES (2, TIME '00:10:00+08:38',TIMESTAMP '1984-12-07
      *  19:56:32+08:29');
             CALL "SUB6" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO TTIME2"
             DISPLAY "VALUES (3, TIME '05:55:15-10:30',"
             DISPLAY "TIMESTAMP '1970-07-13 09:45:10+01:00');"
      *  EXEC SQL INSERT INTO TTIME2
      *    VALUES (3, TIME '05:55:15-10:30',TIMESTAMP '1970-07-13
      *  09:45:10+01:00');
             CALL "SUB7" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO TTIME2"
             DISPLAY "VALUES (1, TIME '17:49:32+05:55',"
             DISPLAY "TIMESTAMP '1972-05-07 02:58:30-11:34');"
      *  EXEC SQL INSERT INTO TTIME2
      *    VALUES (1, TIME '17:49:32+05:55',TIMESTAMP '1972-05-07
      *  02:58:30-11:34');
             CALL "SUB8" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO TTSTORE2"
             DISPLAY "SELECT PK,"
             DISPLAY " EXTRACT (HOUR FROM "
             DISPLAY " TT2 AT TIME ZONE INTERVAL '00:00'
      -    " HOUR TO MINUTE),"
             DISPLAY " EXTRACT (MINUTE FROM"
             DISPLAY " TT2 AT TIME ZONE INTERVAL '00:00'
      -    " HOUR TO MINUTE),"
             DISPLAY " TT2"
             DISPLAY " FROM TTIME2;"
      *  EXEC SQL INSERT INTO TTSTORE2
      *    SELECT PK,
      *    EXTRACT (HOUR FROM 
      *    TT2 AT TIME ZONE INTERVAL '00:00' HOUR TO MINUTE),
      *    EXTRACT (MINUTE FROM
      *    TT2 AT TIME ZONE INTERVAL '00:00' HOUR TO MINUTE),
      *    TT2
      *    FROM TTIME2;
             CALL "SUB9" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *declare cursor to return values in TT 

             DISPLAY "DECLARE data780 CURSOR FOR"
             DISPLAY "SELECT num, colthu, coltmu,"
             DISPLAY " EXTRACT (HOUR FROM TT2),"
             DISPLAY " EXTRACT (MINUTE FROM TT2)"
             DISPLAY "FROM TTSTORE2"
             DISPLAY "ORDER BY colthu, coltmu;"

      *  EXEC SQL DECLARE data780 CURSOR FOR
      *    SELECT num, colthu, coltmu,
      *    EXTRACT (HOUR FROM TT2),
      *    EXTRACT (MINUTE FROM TT2)
      *    FROM TTSTORE2
      *    ORDER BY colthu, coltmu END-EXEC

             DISPLAY "OPEN data780"
      *  EXEC SQL OPEN data780;
             CALL "SUB10" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *initialise all host variables 
             MOVE 99 TO id
             MOVE 99 TO uthr
             MOVE 99 TO utmin
             MOVE 99 TO lochr
             MOVE 99 TO locmin

             DISPLAY "FETCH data780 INTO :id, :uthr, :utmin, :lochr,
      -    " :locmin;"
      *  EXEC SQL FETCH data780 INTO 
      *    :id, :uthr, :utmin, :lochr, :locmin;
             CALL "SUB11" USING SQLCODE SQLSTATE id uthr utmin lochr
             locmin
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "id should be 1; its value is ", id
             if (id  NOT =  1) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "UTC time should be 11:54, it is ", uthr, ":",
             utmin
             if (uthr  NOT =  11  OR  utmin  NOT =  54) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "Stored time should be 17:49, it is ", lochr, ":",
             locmin
             if (lochr  NOT =  17  OR  locmin  NOT =  49) then
               MOVE 0 TO flag
             END-IF

      *initialise all host variables 
             MOVE 99 TO id
             MOVE 99 TO uthr
             MOVE 99 TO utmin
             MOVE 99 TO lochr
             MOVE 99 TO locmin

             DISPLAY "FETCH data780 INTO :id, :uthr, :utmin, :lochr,
      -    " :locmin;"
      *  EXEC SQL FETCH data780 INTO 
      *    :id, :uthr, :utmin, :lochr, :locmin;
             CALL "SUB12" USING SQLCODE SQLSTATE id uthr utmin lochr
             locmin
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "id should be 2; its value is ", id
             if (id  NOT =  2) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "UTC time should be 15:32, it is ", uthr, ":",
             utmin
             if (uthr  NOT =  15  OR  utmin  NOT =  32) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "Stored time should be 0:10, it is ", lochr, ":",
             locmin
             if (lochr  NOT =  0  OR  locmin  NOT =  10) then
               MOVE 0 TO flag
             END-IF

      *initialise all host variables 
             MOVE 99 TO id
             MOVE 99 TO uthr
             MOVE 99 TO utmin
             MOVE 99 TO lochr
             MOVE 99 TO locmin

             DISPLAY "FETCH data780 INTO :id, :uthr, :utmin, :lochr,
      -    " :locmin;"
      *  EXEC SQL FETCH data780 INTO 
      *    :id, :uthr, :utmin, :lochr, :locmin;
             CALL "SUB13" USING SQLCODE SQLSTATE id uthr utmin lochr
             locmin
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "id should be 3; its value is ", id
             if (id  NOT =  3) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "UTC time should be 16:25, it is ", uthr, ":",
             utmin
             if (uthr  NOT =  16  OR  utmin  NOT =  25) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "Stored time should be 5:55, it is ", lochr, ":",
             locmin
             if (lochr  NOT =  5  OR  locmin  NOT =  55) then
               MOVE 0 TO flag
             END-IF

      *initialise all host variables 
             MOVE 99 TO id
             MOVE 99 TO uthr
             MOVE 99 TO utmin
             MOVE 99 TO lochr
             MOVE 99 TO locmin

             DISPLAY "FETCH data780 INTO :id, :uthr, :utmin, :lochr,
      -    " :locmin;"
      *  EXEC SQL FETCH data780 INTO 
      *    :id, :uthr, :utmin, :lochr, :locmin;
             CALL "SUB14" USING SQLCODE SQLSTATE id uthr utmin lochr
             locmin
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "id should be 4; its value is ", id
             if (id  NOT =  4) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "UTC time should be 19:35, it is ", uthr, ":",
             utmin
             if (uthr  NOT =  19  OR  utmin  NOT =  35) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "Stored time should be 12:0, it is ", lochr, ":",
             locmin
             if (lochr  NOT =  12  OR  locmin  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *initialise all host variables 
             MOVE 99 TO id
             MOVE 99 TO uthr
             MOVE 99 TO utmin
             MOVE 99 TO lochr
             MOVE 99 TO locmin

             DISPLAY "FETCH data780 INTO :id, :uthr, :utmin, :lochr,
      -    " :locmin;"
      *  EXEC SQL FETCH data780 INTO 
      *    :id, :uthr, :utmin, :lochr, :locmin;
             CALL "SUB15" USING SQLCODE SQLSTATE id uthr utmin lochr
             locmin
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "id should be 5; its value is ", id
             if (id  NOT =  5) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "UTC time should be 19:40, it is ", uthr, ":",
             utmin
             if (uthr  NOT =  19  OR  utmin  NOT =  40) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "Stored time should be 10:0, it is ", lochr, ":",
             locmin
             if (lochr  NOT =  10  OR  locmin  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE data780"
      *  EXEC SQL CLOSE data780;
             CALL "SUB16" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *Check TIMESTAMP WITH TIMEZONE values 
      *initialise all host variables 
             MOVE 99 TO id
             MOVE 99 TO lochr
             MOVE 99 TO locmin

             DISPLAY "SELECT PK, EXTRACT (HOUR FROM TS2),"
             DISPLAY " EXTRACT (MINUTE FROM TS2)"
             DISPLAY "INTO :id, :lochr, :locmin"
             DISPLAY "FROM TTIME2"
             DISPLAY "WHERE PK = 1;"

      *  EXEC SQL SELECT PK,
      *    EXTRACT (HOUR FROM TS2),
      *    EXTRACT (MINUTE FROM TS2)
      *    INTO :id, :lochr, :locmin
      *    FROM TTIME2
      *    WHERE PK = 1;
             CALL "SUB17" USING SQLCODE SQLSTATE id lochr locmin
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "id should be 1; its value is ", id
             DISPLAY "lochr should be 2; its value is ", lochr
             DISPLAY "locmin should be 58; its value is ", locmin
             if (id  NOT =  1  OR  lochr  NOT =  2  OR  locmin  NOT = 
             58) then
               MOVE 0 TO flag
             END-IF

      *between 16:25 and 19:40 UTC 
      *between 12:25 and 15:40 AST 
      *between 17:25 and 20:40 MET 

             DISPLAY "DECLARE data780b CURSOR FOR"
             DISPLAY " SELECT num FROM TTSTORE2"
             DISPLAY " WHERE TT2 BETWEEN TIME '12:25:00-04:00'"
             DISPLAY " AND TIME '20:40:00+01:00'"
             DISPLAY " ORDER BY num DESC;"
      *  EXEC SQL DECLARE data780b CURSOR FOR
      *    SELECT num FROM TTSTORE2
      *    WHERE TT2 BETWEEN TIME '12:25:00-04:00'
      *    AND TIME '20:40:00+01:00'
      *    ORDER BY num DESC END-EXEC

      *Descending order: 
      *5  10:00:00-9:40 
      *4  12:00:00-7:35 
      *2  00:10:00+8:38 

             DISPLAY "OPEN data780b;"
      *  EXEC SQL OPEN data780b;
             CALL "SUB18" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             MOVE 0 TO id
             DISPLAY "FETCH DATA780B INTO :id;"
      *  EXEC SQL FETCH DATA780B INTO :id;
             CALL "SUB19" USING SQLCODE SQLSTATE id
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "id should be 5; its value is ", id
             if (id  NOT =  5) then
               MOVE 0 TO flag
             END-IF

             MOVE 0 TO id
             DISPLAY "FETCH DATA780B INTO :id;"
      *  EXEC SQL FETCH DATA780B INTO :id;
             CALL "SUB20" USING SQLCODE SQLSTATE id
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "id should be 4; its value is ", id
             if (id  NOT =  4) then
               MOVE 0 TO flag
             END-IF

             MOVE 0 TO id
             DISPLAY "FETCH DATA780B INTO :id;"
      *  EXEC SQL FETCH DATA780B INTO :id;
             CALL "SUB21" USING SQLCODE SQLSTATE id
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "id should be 2; its value is ", id
             if (id  NOT =  2) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE data780b;"
      *  EXEC SQL CLOSE data780b;
             CALL "SUB22" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB23" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " yts780.mco *** pass *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7560','pass','MCO');
               CALL "SUB24" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " yts780.mco *** fail *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7560','fail','MCO');
               CALL "SUB25" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB26" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST7560 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion. 
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined       
      *subclasses with 000.  This replacement equates valid     
      *implementation-defined subclasses with the 000 value     
      *expected by the test case; otherwise the test will fail. 
      *After calling NOSUBCLASS, NORMSQ will be tested          
      *                          SQLSTATE will be printed.      

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ 
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table 
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
           
      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def. 
      *Changed NORMSQ means implementation-defined subclass,    
      *so proceed to zero it out, if valid (0-9,A-Z)            
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ 
      *valid characters are 0-9, A-Z 
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
          
           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z 
      *examining position 5 of char array NORMSQ 
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
   
      *implementation-defined subclasses are allowed for warnings 
      *(class = 01).  These equate to successful completion 
      *SQLSTATE values of 00000. 
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2 

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

¤ Dauer der Verarbeitung: 0.31 Sekunden  (vorverarbeitet)  ¤



Download des
Quellennavigators
Download des
sprechenden Kalenders

in der Quellcodebibliothek suchen




Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.


Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.


Bot Zugriff