|
IDENTIFICATION DIVISION.
PROGRAM-ID. YTS784.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "YTS784.SCO") calling SQL
* procedures in file "YTS784.MCO".
*Copyright 1996 National Computing Centre Limited,
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* YTS784.SCO
* WRITTEN BY: Susan Watters
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* Scroll cursor with joined table, FETCH ABS literal
*
*
* REFERENCES
* 13.1 <declare cursor>
* 13.3 <fetch statement>
* 13.3 GR3a
* 7.5 <joined table>
* F#43 Scrolled cursors
* F#4 Joined table
*
* DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
* 3/11/95 string initialisations corrected
*
* QA Status: Full FC
*
* Revised by DWF 1996-03-19
* Added rollback after authid
* Removed EXEC SQL from printf
* Fixed printout
* Cleaned up
* Fixed string lengths
* Fixed broken fetches
* Fixed bogus string assignments
* Fixed syntax errors
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 ename1 PIC X(20).
01 projn1 PIC X(3).
01 ename2 PIC X(20).
01 projn2 PIC X(3).
01 ename3 PIC X(20).
01 projn3 PIC X(3).
01 ename4 PIC X(20).
01 projn4 PIC X(3).
01 ename5 PIC X(20).
01 projn5 PIC X(3).
01 ename6 PIC X(20).
01 projn6 PIC X(3).
01 ename7 PIC X(20).
01 projn7 PIC X(3).
01 indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic3 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic4 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic5 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic6 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic7 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ncnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Module COBOL, yts784.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7513 *******************
MOVE 1 TO flag
MOVE 0 TO ncnt
DISPLAY " TEST7513 "
DISPLAY " Scr.cursor with joined table, FETCH ABS literal"
DISPLAY "References:"
DISPLAY " 13.1
DISPLAY " 13.3 "
DISPLAY " 13.3 GR3a"
DISPLAY " 7.5 "
DISPLAY " F#43 Scrolled cursors"
DISPLAY " F#4 Joined table"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*Insert extra information into table
DISPLAY "INSERT INTO STAFF (EMPNUM) VALUES ('E6');"
* EXEC SQL INSERT INTO STAFF (EMPNUM) VALUES ('E6');
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO WORKS (EMPNUM, PNUM) VALUES ('E6',
- " 'P6');"
* EXEC SQL INSERT INTO WORKS (EMPNUM, PNUM) VALUES ('E6',
* 'P6');
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*declare cursor
DISPLAY "DECLARE data1 SCROLL CURSOR;"
DISPLAY "FOR SELECT STAFF.EMPNAME, WORKS.PNUM "
DISPLAY "FROM STAFF LEFT OUTER JOIN WORKS USING (EMPNUM)"
DISPLAY "WHERE WORKS.PNUM IN ('P1','P4','P6');"
* EXEC SQL DECLARE data1 SCROLL CURSOR
* FOR SELECT STAFF.EMPNAME, WORKS.PNUM
* FROM STAFF LEFT OUTER JOIN WORKS USING (EMPNUM)
* WHERE WORKS.PNUM IN ('P1','P4','P6') END-EXEC
*EMPNAME PNUM
*Alice P1
*Alice P4
*Alice P6
*Betty P1
*Don P4
*NULL P6
*open cursor
DISPLAY "OPEN data1;"
* EXEC SQL OPEN data1;
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE "xxxxxxxxxxxxxxxxxxxx" TO ename1
MOVE ename1 TO ename2
MOVE ename1 TO ename3
MOVE ename1 TO ename4
MOVE ename1 TO ename5
MOVE ename1 TO ename6
MOVE "xxx" TO projn1
MOVE projn1 TO projn2
MOVE projn1 TO projn3
MOVE projn1 TO projn4
MOVE projn1 TO projn5
MOVE projn1 TO projn6
MOVE 99 TO indic1
MOVE 99 TO indic2
MOVE 99 TO indic3
MOVE 99 TO indic4
MOVE 99 TO indic5
MOVE 99 TO indic6
MOVE "xxxxxxxxxxxxxxxxxxxx" TO ename7
MOVE "xxx" TO projn7
MOVE 99 TO indic7
*fetch all rows defined by the cursor
*as there is no order by clause rows won't be returned in a spec
*fetch first row
DISPLAY "Fetch first row"
DISPLAY "FETCH data1 INTO :ename1:indic1, :projn1;"
* EXEC SQL FETCH data1 INTO :ename1:indic1, :projn1;
CALL "SUB6" USING SQLCODE SQLSTATE ename1 indic1 projn1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
if (indic1 = -1) then
DISPLAY "First column is NULL"
COMPUTE ncnt = ncnt + 1
else
DISPLAY "ename1 is ", ename1
END-IF
DISPLAY "projn1 is ", projn1
DISPLAY "Fetch second row"
DISPLAY "FETCH data1 INTO :ename2:indic2, :projn2;"
* EXEC SQL FETCH data1 INTO :ename2:indic2, :projn2;
CALL "SUB7" USING SQLCODE SQLSTATE ename2 indic2 projn2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
if (indic2 = -1) then
DISPLAY "First column is NULL"
COMPUTE ncnt = ncnt + 1
else
DISPLAY "ename2 is ", ename2
END-IF
DISPLAY "projn2 is ", projn2
DISPLAY "Fetch third row"
DISPLAY "FETCH data1 INTO :ename3:indic3, :projn3;"
* EXEC SQL FETCH data1 INTO :ename3:indic3, :projn3;
CALL "SUB8" USING SQLCODE SQLSTATE ename3 indic3 projn3
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
if (indic3 = -1) then
DISPLAY "First column is NULL"
COMPUTE ncnt = ncnt + 1
else
DISPLAY "ename3 is ", ename3
END-IF
DISPLAY "projn3 is ", projn3
DISPLAY "Fetch fourth row"
DISPLAY "FETCH data1 INTO :ename4:indic4, :projn4;"
* EXEC SQL FETCH data1 INTO :ename4:indic4, :projn4;
CALL "SUB9" USING SQLCODE SQLSTATE ename4 indic4 projn4
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
if (indic4 = -1) then
DISPLAY "First column is NULL"
COMPUTE ncnt = ncnt + 1
else
DISPLAY "ename4 is ", ename4
END-IF
DISPLAY "projn4 is ", projn4
DISPLAY "Fetch fifth row"
DISPLAY "FETCH data1 INTO :ename5:indic5, :projn5;"
* EXEC SQL FETCH data1 INTO :ename5:indic5, :projn5;
CALL "SUB10" USING SQLCODE SQLSTATE ename5 indic5 projn5
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
if (indic5 = -1) then
DISPLAY "First column is NULL"
COMPUTE ncnt = ncnt + 1
else
DISPLAY "ename5 is ", ename5
END-IF
DISPLAY "projn5 is ", projn5
DISPLAY "Fetch sixth row"
DISPLAY "FETCH data1 INTO :ename6:indic6, :projn6;"
* EXEC SQL FETCH data1 INTO :ename6:indic6, :projn6;
CALL "SUB11" USING SQLCODE SQLSTATE ename6 indic6 projn6
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
if (indic6 = -1) then
DISPLAY "First column is NULL"
COMPUTE ncnt = ncnt + 1
else
DISPLAY "ename6 is ", ename6
END-IF
DISPLAY "projn6 is ", projn6
DISPLAY "FETCH data1 INTO :ename7:indic7, :projn7;"
* EXEC SQL FETCH data1 INTO :ename7:indic7, :projn7;
CALL "SUB12" USING SQLCODE SQLSTATE ename7 indic7 projn7
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
if (SQLCODE NOT = 100) then
MOVE 0 TO flag
END-IF
DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "02000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "First column should have been null exactly once;"
DISPLAY "Count is ", ncnt, "."
if (ncnt NOT = 1) then
MOVE 0 TO flag
END-IF
*fetch ABSOLUTE 2 data1
MOVE "xxxxxxxxxxxxxxxxxxxx" TO ename7
MOVE "xxx" TO projn7
MOVE 99 TO indic7
DISPLAY "FETCH ABSOLUTE 2 FROM data1 INTO :ename7:indic7,
- " :projn7;"
* EXEC SQL FETCH ABSOLUTE 2 FROM data1 INTO :ename7:indic7,
* :projn7;
CALL "SUB13" USING SQLCODE SQLSTATE ename7 indic7 projn7
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
if (indic2 = -1) then
DISPLAY "indic7 should be -1; its value is ", indic7
if (indic7 NOT = -1) then
MOVE 0 TO flag
END-IF
else
DISPLAY "ename7 should be ", ename2, "; its value is ",
ename7
if (ename7 NOT = ename2) then
MOVE 0 TO flag
END-IF
END-IF
DISPLAY "projn7 should be ", projn2, "; its value is ",
projn7
if (projn7 NOT = projn2) then
MOVE 0 TO flag
END-IF
*fetch ABSOLUTE 4 data1
MOVE "xxxxxxxxxxxxxxxxxxxx" TO ename7
MOVE "xxx" TO projn7
MOVE 99 TO indic7
DISPLAY "FETCH ABSOLUTE 4 FROM data1 INTO :ename7:indic7,
- " :projn7;"
* EXEC SQL FETCH ABSOLUTE 4 FROM data1 INTO :ename7:indic7,
* :projn7;
CALL "SUB14" USING SQLCODE SQLSTATE ename7 indic7 projn7
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
if (indic4 = -1) then
DISPLAY "indic7 should be -1; its value is ", indic7
if (indic7 NOT = -1) then
MOVE 0 TO flag
END-IF
else
DISPLAY "ename7 should be ", ename4, "; its value is ",
ename7
if (ename7 NOT = ename4) then
MOVE 0 TO flag
END-IF
END-IF
DISPLAY "projn7 should be ", projn4, "; its value is ",
projn7
if (projn7 NOT = projn4) then
MOVE 0 TO flag
END-IF
*fetch ABSOLUTE 5 data1
MOVE "xxxxxxxxxxxxxxxxxxxx" TO ename7
MOVE "xxx" TO projn7
MOVE 99 TO indic7
DISPLAY "FETCH ABSOLUTE 5 FROM data1 INTO :ename7:indic7,
- " :projn7;"
* EXEC SQL FETCH ABSOLUTE 5 FROM data1 INTO :ename7:indic7,
* :projn7;
CALL "SUB15" USING SQLCODE SQLSTATE ename7 indic7 projn7
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
if (indic5 = -1) then
DISPLAY "indic7 should be -1; its value is ", indic7
if (indic7 NOT = -1) then
MOVE 0 TO flag
END-IF
else
DISPLAY "ename7 should be ", ename5, "; its value is ",
ename7
if (ename7 NOT = ename5) then
MOVE 0 TO flag
END-IF
END-IF
DISPLAY "projn7 should be ", projn5, "; its value is ",
projn7
if (projn7 NOT = projn5) then
MOVE 0 TO flag
END-IF
*attempt to retreive the thirtieth row
DISPLAY "fetch the thirtieth row - should not succeed"
DISPLAY "FETCH ABSOLUTE 30 FROM data1 INTO :ename7:indic7,
- " :projn7;"
* EXEC SQL FETCH ABSOLUTE 30 FROM data1 INTO :ename7:indic7,
* :projn7;
CALL "SUB16" USING SQLCODE SQLSTATE ename7 indic7 projn7
MOVE SQLCODE TO SQL-COD
*That should generate a no data exception
*which is SQLSTATE 02000
DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
if (SQLCODE NOT = 100) then
MOVE 0 TO flag
END-IF
DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "02000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
*close cursor data1
DISPLAY "Close Cursor"
DISPLAY "CLOSE data1;"
* EXEC SQL CLOSE data1;
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB18" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts784.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7513','pass','MCO');
CALL "SUB19" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts784.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7513','fail','MCO');
CALL "SUB20" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB21" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7513 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.0 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
