|
IDENTIFICATION DIVISION.
PROGRAM-ID. YTS807.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "YTS807.SCO") calling SQL
* procedures in file "YTS807.MCO".
*Copyright 1996 National Computing Centre Ltd,
*and Computer Logic R&D S.A
*on behalf of CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* YTS807.SCO
* WRITTEN BY: Susan Watters
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This routine tests TIMEZONE_HOUR and TIMEZONE_MINUTE in
* <extract expression>
*
* REFERENCES
* 6.6 SR6b <numeric value function>
* 6.6 SR4
* 6.6 GR3)a)ii
* 6.10 GR10 <cast expression>
* F#41 Time zone specification
* F#5 DATETIME data types
* F#20 CAST functions
*
* DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
* Table Inserts corrected 24/10/95
* Superfluous references to CASCADE removed from DELETE 3/11/95
*
* QA Status: Full FC
*
* Revised by DWF 1996-03-28
* Added rollback after authid
* Deleted extraneous code
* Fixed syntax errors
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 id PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 id2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 min PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 hrs PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 mn1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 mn2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 hr1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 hr2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 co PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Module COBOL, yts807.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7564 *******************
MOVE 1 TO flag
DISPLAY " TEST7564 "
DISPLAY " TIMEZONE_HOUR & TIMEZONE_MINUTE in
- " expr.>"
DISPLAY "References:"
DISPLAY " 6.6 SR6b
DISPLAY " 6.6 SR4"
DISPLAY " 6.6 GR3)a)ii"
DISPLAY " 6.10 GR10 "
DISPLAY " F#41 Time zone specification."
DISPLAY " F#5 DATETIME data types."
DISPLAY " F#20 CAST functions."
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*Ensure tables used in the test are empty
DISPLAY "DELETE FROM TTIME_BASE;"
* EXEC SQL DELETE FROM TTIME_BASE;
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*Insert values into TTIME
DISPLAY "INSERT INTO TTIME (PK, TT)"
DISPLAY "VALUES (1, TIME '00:00:00');"
* EXEC SQL INSERT INTO TTIME (PK, TT)
* VALUES (1, TIME '00:00:00');
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*return the primary key and time hour and minutes from TTIME TT;
*initialise host variables
MOVE 99 TO id
COMPUTE hrs = -1
COMPUTE min = -1
DISPLAY "SELECT PK,"
DISPLAY " EXTRACT (TIMEZONE_HOUR FROM CAST (TT AS TIME
- " WITH TIME ZONE)),"
DISPLAY " EXTRACT (TIMEZONE_MINUTE FROM CAST (TT AS TIME
- " WITH TIME ZONE))"
DISPLAY "INTO :id, :hrs, :min"
DISPLAY "FROM TTIME"
DISPLAY "WHERE PK = 1;"
* EXEC SQL SELECT PK,
* EXTRACT (TIMEZONE_HOUR FROM CAST (TT AS TIME WITH TIME
* ZONE)),
* EXTRACT (TIMEZONE_MINUTE FROM CAST (TT AS TIME WITH TIME
* ZONE))
* INTO :id, :hrs, :min
* FROM TTIME
* WHERE PK = 1;
CALL "SUB5" USING SQLCODE SQLSTATE id hrs min
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "id should be 1; its value is ", id
if (id NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "hours should be in the range -12 to 13; its value
- " is ", hrs
if (hrs < -12 OR hrs > 13) then
MOVE 0 TO flag
END-IF
DISPLAY "minutes should be in the range 0 to 59; its value
- " is ", min
if (min < 0 OR min > 59) then
MOVE 0 TO flag
END-IF
*tidy up TTIME before inserting into TTIME2
DISPLAY "DELETE FROM TTIME_BASE;"
* EXEC SQL DELETE FROM TTIME_BASE;
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*insert into TTIME2
DISPLAY "INSERT INTO TTIME2 "
DISPLAY "VALUES (1, TIME '00:00:00+07:35',"
DISPLAY "TIMESTAMP '1995-12-25 00:00:00+07:35');"
* EXEC SQL INSERT INTO TTIME2
* VALUES (1, TIME '00:00:00+07:35',
* TIMESTAMP '1995-12-25 00:00:00+07:35');
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO TTIME2 "
DISPLAY "VALUES (2, TIME '01:00:15+09:15',"
DISPLAY "TIMESTAMP '1990-07-13 10:30:16+12:35');"
* EXEC SQL INSERT INTO TTIME2
* VALUES (2, TIME '01:00:15+09:15',
* TIMESTAMP '1990-07-13 10:30:16+12:35');
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO TTIME2 "
DISPLAY "VALUES (3, TIME '23:30:10-16:12',"
DISPLAY "TIMESTAMP '1989-03-30 07:58:10-02:20');"
* EXEC SQL INSERT INTO TTIME2
* VALUES (3, TIME '23:30:10-16:12',
* TIMESTAMP '1989-03-30 07:58:10-02:20');
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO TTIME2 "
DISPLAY "VALUES (4, TIME '12:55:05-07:35',"
DISPLAY "TIMESTAMP '1970-06-28 20:10:15-10:07');"
* EXEC SQL INSERT INTO TTIME2
* VALUES (4, TIME '12:55:05-07:35',
* TIMESTAMP '1970-06-28 20:10:15-10:07');
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO TTIME2 "
DISPLAY "VALUES (5, TIME '09:45:45+09:15',"
DISPLAY "TIMESTAMP '1961-04-21 01:02:03+05:29');"
* EXEC SQL INSERT INTO TTIME2
* VALUES (5, TIME '09:45:45+09:15',
* TIMESTAMP '1961-04-21 01:02:03+05:29');
CALL "SUB11" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Extract time zone hour and minute from TT2 and TS2
*should be the same time zone as that inserted earlier
*initialise host variables
COMPUTE id2 = -1
MOVE 99 TO hr1
MOVE 99 TO mn1
MOVE 99 TO hr2
MOVE 99 TO mn2
DISPLAY "SELECT PK,"
DISPLAY " EXTRACT (TIMEZONE_HOUR FROM TT2),"
DISPLAY " EXTRACT (TIMEZONE_MINUTE FROM TT2),"
DISPLAY " EXTRACT (TIMEZONE_HOUR FROM TS2),"
DISPLAY " EXTRACT (TIMEZONE_MINUTE FROM TS2)"
DISPLAY "INTO :id2, :hr1, :mn1, :hr2, :mn2"
DISPLAY "FROM TTIME2"
DISPLAY "WHERE PK = 1;"
* EXEC SQL SELECT PK,
* EXTRACT (TIMEZONE_HOUR FROM TT2),
* EXTRACT (TIMEZONE_MINUTE FROM TT2),
* EXTRACT (TIMEZONE_HOUR FROM TS2),
* EXTRACT (TIMEZONE_MINUTE FROM TS2)
* INTO :id2, :hr1, :mn1, :hr2, :mn2
* FROM TTIME2
* WHERE PK = 1;
CALL "SUB12" USING SQLCODE SQLSTATE id2 hr1 mn1 hr2 mn2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "id2 should be 1; its value is ", id2
DISPLAY "hr1 should be 7; its value is ", hr1
DISPLAY "mn1 should be 35; its value is ", mn1
DISPLAY "hr2 should be 7; its value is ", hr2
DISPLAY "mn2 should be 35; its value is ", mn2
if (id2 NOT = 1 OR hr1 NOT = 7 OR mn1 NOT = 35)
then
MOVE 0 TO flag
END-IF
if (hr2 NOT = 7 OR mn2 NOT = 35) then
MOVE 0 TO flag
END-IF
*select the number of distinct vals for TIME STAMP minute
*initialise host variables
DISPLAY "INSERT INTO ET (col5)"
DISPLAY "SELECT EXTRACT (TIMEZONE_MINUTE FROM TS2) AS AA"
DISPLAY "FROM TTIME2;"
* EXEC SQL INSERT INTO ET (col5)
* SELECT EXTRACT (TIMEZONE_MINUTE FROM TS2) AS AA
* FROM TTIME2;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE co = -1
DISPLAY "SELECT COUNT (DISTINCT COL5) INTO :co"
DISPLAY "FROM CTS1.ET;"
* EXEC SQL SELECT COUNT (DISTINCT COL5) INTO :co
* FROM CTS1.ET;
CALL "SUB14" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 4; its value is ", co
if (co NOT = 4) then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB15" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts807.mco *** pass ***"
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7564','pass','MCO');
CALL "SUB16" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts807.mco *** fail ***"
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7564','fail','MCO');
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB18" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7564 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.31 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
