|
IDENTIFICATION DIVISION.
PROGRAM-ID. CDR017.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* EMBEDDED COBOL (file "CDR017.PCO")
****************************************************************
*
* COMMENT SECTION
*
* DATE 1989/04/07 EMBEDDED COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* CDR017.PCO
* WRITTEN BY: SUN DAJUN
* TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
*
* THIS ROUTINE TESTS THE REFERENTIAL INTEGRITY CONSTRAINT FOR
* SQL.
*
* REFERENCES
* AMERICAN NATIONAL STANDARD database language - SQL
* with Integrity Enhancement
*
* SECTION 6.7 <referential constraint definition>
* <referential constraint definition>::=
* FOREIGN KEY (<referencing columns>)
* <references specification>
* <references specification>::=
* REFERENCES <referenced table and columns>
* <referencing columns>::=
* <reference column list>
* <refereced table and columns>::=
* <table name>((<reference column list>
* <reference column list>::=
* <column name>({,<column name>}...)
*
****************************************************************
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 count2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 EMPNO1 PIC X(3).
01 long1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
EXEC SQL END DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 code1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 code2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* date_time declaration *
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
PROCEDURE DIVISION.
P0.
MOVE "SUN" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
EXEC SQL SELECT
USER INTO :uidx FROM SUN.ECCO END-EXEC
if (uid NOT = uidx) then
DISPLAY "ERROR: User " uid " expected."
DISPLAY "User " uidx " connected."
DISPLAY " "
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Embedded COBOL, cdr017.pco"
DISPLAY " "
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
DISPLAY " "
* date_time print *
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0355 *******************
*This test inserts a row in FOREIGN KEY TABLE --
*SIZ2_F%, but its primary columns value of this row
*has not been inserted into PRIMARY KEY TABLEs --
*SIZ2_P. This should be an Error.
DISPLAY " FIPS sizing TEST0355 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " INSERT INTO SIZ2_F1"
DISPLAY " VALUES (' E','AAA');"
DISPLAY " "
DISPLAY " INSERT INTO SIZ2_F10"
DISPLAY " VALUES (9,'AAB');"
EXEC SQL INSERT INTO SIZ2_F1
VALUES (' E','AAA') END-EXEC
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
EXEC SQL INSERT INTO SIZ2_F10
VALUES (9,'AAB') END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE code1 = code1 * SQLCODE
EXEC SQL SELECT COUNT(*) INTO:count1
FROM SIZ2_F10 END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " code1 is not equal to 0."
DISPLAY " count1 is 4"
DISPLAY " Your answer is :"
DISPLAY " code1 is ", code1
DISPLAY " count1 is ", count1
if (code1 NOT = 0 AND count1 = 4) then
EXEC SQL INSERT INTO TESTREPORT
VALUES('0355','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
EXEC SQL INSERT INTO TESTREPORT
VALUES('0355','fail','PCO') END-EXEC
ADD 1 TO errcnt
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr017.pco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
************************ END TEST0355 ************************
******************** BEGIN TEST0356 *********************
*This test deletes a row from PRIMARY KEY
*TABLE -- SIZ2_P, but there are coresponding rows in
*FOREIGN KEY TABLEs -- SIZ2_F%, this should be an ERROR.
DISPLAY " FIPS sizing TEST0356 "
DISPLAY " REFERENTIAL INTEGRITY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " DELETE FROM SIZ2_P"
DISPLAY " WHERE P1 = ' A';"
EXEC SQL DELETE FROM SIZ2_P
WHERE P1 = ' A' END-EXEC
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
MOVE "NV" TO EMPNO1
EXEC SQL SELECT P1 INTO :EMPNO1
FROM SIZ2_P
WHERE P1 = ' A' END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct result is code1 not equal to 0"
DISPLAY " Your answer is code1=", code1
if (code1 NOT = 0 AND EMPNO1 = " A") then
EXEC SQL INSERT INTO TESTREPORT
VALUES('0356','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
EXEC SQL INSERT INTO TESTREPORT
VALUES('0356','fail','PCO') END-EXEC
ADD 1 TO errcnt
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr017.pco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
****************** END TEST0356 ********************
******************** BEGIN TEST0357 *******************
*This program updates a row in PRIMARY KEY TABLE
*-- SIZ2_P, set (A,-,-,-,-,-,-,-,-) to (Z,-,-,-,
*-,-,-,-,-), there are (A,*) in SIZ2_F%.
DISPLAY " FIPS sizing TEST0357 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " UPDATE SIZ2_P"
DISPLAY " SET P1=' Z'"
DISPLAY " WHERE P1=' A';"
DISPLAY " "
DISPLAY " UPDATE SIZ2_P"
DISPLAY " SET P10 = 100"
DISPLAY " WHERE P10 = 8;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM SIZ2_P"
DISPLAY " WHERE P1 = ' A';"
EXEC SQL UPDATE SIZ2_P
SET P1 = ' Z'
WHERE P1 = ' A' END-EXEC
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
EXEC SQL UPDATE SIZ2_P
SET P10 = 100
WHERE P10 = 8 END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE code1 = code1 * SQLCODE
EXEC SQL SELECT COUNT(*) INTO :count1
FROM SIZ2_P
WHERE P1 = ' A' END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct result is code1 not equal 0"
DISPLAY " count1 = 1"
DISPLAY " Your answer is code1=", code1
DISPLAY " count1 = ", count1
if (code1 NOT = 0 AND count1 = 1) then
EXEC SQL INSERT INTO TESTREPORT
VALUES('0357','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
EXEC SQL INSERT INTO TESTREPORT
VALUES('0357','fail','PCO') END-EXEC
ADD 1 TO errcnt
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr017.pco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
******************** END TEST0357 *************************
******************** BEGIN TEST0358 *******************
*This program updates a row in PRIMARY KEY TABLE
*-- SIZ2_P, this will let two rows have the same value
* in PRIMARY COLUMNs.
DISPLAY " FIPS sizing TEST0358 "
DISPLAY " PRIMARY KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " SELECT COUNT(*) INTO:count1"
DISPLAY " FROM SIZ2_P"
DISPLAY " WHERE P1 = ' A';"
DISPLAY " "
DISPLAY " UPDATE SIZ2_P"
DISPLAY " SET P1 = 'B '"
DISPLAY " WHERE P1 = ' A';"
DISPLAY "code1 = SQLCODE;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count2"
DISPLAY " FROM SIZ2_P"
DISPLAY " WHERE P1 = ' A';"
DISPLAY " "
MOVE 0 TO count1
MOVE 0 TO count2
EXEC SQL SELECT COUNT(*) INTO:count1
FROM SIZ2_P
WHERE P1 = ' A' END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL UPDATE SIZ2_P
SET P1 = 'B '
WHERE P1 = ' A' END-EXEC
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
EXEC SQL SELECT COUNT(*) INTO:count2
FROM SIZ2_P
WHERE P1 = ' A' END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " code1 is not equal to 0."
DISPLAY " count1 is 1"
DISPLAY " count2 is 1"
DISPLAY " Your answer is :"
DISPLAY " code1 is ", code1
DISPLAY " count1 is ", count1
DISPLAY " count2 is ", count2
if (code1 < 0 AND count1 = 1 AND count2 = 1) then
EXEC SQL INSERT INTO TESTREPORT
VALUES('0358','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
EXEC SQL INSERT INTO TESTREPORT
VALUES('0358','fail','PCO') END-EXEC
ADD 1 TO errcnt
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr017.pco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
**************** END TEST 0358 **********
******************** BEGIN TEST0359 *******************
*This test updates a row or rows on FOREIGN KEY
*column in table SIZ2_F1,set those rows (' A',*) to
*(' Z',*),but there is not a row (' Z',*,*,*,*,*,*
**,*,*) in PRIMARY TABLE -- SIZ2_P,this should be an
*ERROR.
DISPLAY " FIPS sizing TEST0359 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " UPDATE SIZ2_F1"
DISPLAY " SET F1=' Z'"
DISPLAY " WHERE F1=' A';"
DISPLAY "code1 = SQLCODE;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM SIZ2_F1"
DISPLAY " WHERE F1 = ' A';"
EXEC SQL UPDATE SIZ2_F1
SET F1 = ' Z'
WHERE F1 = ' A' END-EXEC
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
EXEC SQL SELECT COUNT(*) INTO :count1
FROM SIZ2_F1
WHERE F1 = ' A' END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct result is code1 not equal 0"
DISPLAY " count1 = 1"
DISPLAY " Your answer is code1=", code1
DISPLAY " count1 = ", count1
if (code1 < 0 AND count1 = 1) then
EXEC SQL INSERT INTO TESTREPORT
VALUES('0359','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
EXEC SQL INSERT INTO TESTREPORT
VALUES('0359','fail','PCO') END-EXEC
ADD 1 TO errcnt
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr017.pco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
******************** END TEST0359 *************************
******************** BEGIN TEST0375 *******************
*Check embeded variable violate CHECH rules.
DISPLAY " TEST0375 "
DISPLAY " EMBEDED VAR violate the integrity
- " "
DISPLAY " SQL with Integrity Enhancement section 6.8"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " UPDATE SIZ3_P5"
DISPLAY " SET F1 = 10 * :long1 / 20 - 10 + 16"
DISPLAY " WHERE F1 = 5;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count1"
DISPLAY " FROM SIZ3_P5"
DISPLAY " WHERE F1 = 11;"
DISPLAY " "
DISPLAY " DELETE FROM SIZ3_F"
DISPLAY " WHERE P5 = 5;"
DISPLAY " "
DISPLAY " UPDATE SIZ3_P5"
DISPLAY " SET F1 = 10 * :long1 / 20 - 10 + 16"
DISPLAY " WHERE F1 = 5;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count2"
DISPLAY " FROM SIZ3_P5"
DISPLAY " WHERE F1 = 11;"
DISPLAY " "
COMPUTE count1 = -1
COMPUTE count2 = -1
MOVE 10 TO long1
EXEC SQL UPDATE SIZ3_P5
SET F1 = 10 * :long1 / 20 - 10 + 16
WHERE F1 = 5 END-EXEC
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
EXEC SQL SELECT COUNT(*) INTO:count1
FROM SIZ3_P5
WHERE F1 = 11 END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL DELETE FROM SIZ3_F
WHERE P5 = 5 END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL UPDATE SIZ3_P5
SET F1 = 10 * :long1 / 20 - 10 + 16
WHERE F1 = 5 END-EXEC
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code2
EXEC SQL SELECT COUNT(*) INTO:count2
FROM SIZ3_P5
WHERE F1 = 11 END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " code1 < 0"
DISPLAY " code2 = 0"
DISPLAY " count1 is 0"
DISPLAY " count2 is 1"
DISPLAY " Your answer is :"
DISPLAY " code1 is ", code1
DISPLAY " code2 is ", code2
DISPLAY " count1 is ", count1
DISPLAY " count2 is ", count2
if (code1 < 0 AND code2 = 0 AND count2 = 1 AND
count1 = 0) then
EXEC SQL INSERT INTO TESTREPORT
VALUES('0375','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
EXEC SQL INSERT INTO TESTREPORT
VALUES('0375','fail','PCO') END-EXEC
ADD 1 TO errcnt
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr017.pco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
**************** END TEST 0375 **********
******************** BEGIN TEST0376 *******************
*Join with referential integrity.
DISPLAY " TEST0376 "
DISPLAY " Join with referential integrity
- " "
DISPLAY " SQL with Integrity Enhancement section 6.8"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count1"
DISPLAY " FROM
- " SIZ3_F,SIZ3_P1,SIZ3_P2,SIZ3_P3,SIZ3_P4,"
DISPLAY " SIZ3_P5,SIZ3_P6"
DISPLAY " WHERE P1 = SIZ3_P1.F1"
DISPLAY " AND P2 = SIZ3_P2.F1"
DISPLAY " AND P3 = SIZ3_P3.F1"
DISPLAY " AND P4 = SIZ3_P4.F1"
DISPLAY " AND P5 = SIZ3_P5.F1"
DISPLAY " AND P6 = SIZ3_P6.F1"
DISPLAY " AND SIZ3_P3.F1 BETWEEN 1 AND 2;"
DISPLAY " "
COMPUTE count1 = -1
EXEC SQL SELECT COUNT(*) INTO:count1
FROM SIZ3_F,SIZ3_P1,SIZ3_P2,SIZ3_P3,SIZ3_P4,
SIZ3_P5,SIZ3_P6
WHERE P1 = SIZ3_P1.F1
AND P2 = SIZ3_P2.F1
AND P3 = SIZ3_P3.F1
AND P4 = SIZ3_P4.F1
AND P5 = SIZ3_P5.F1
AND P6 = SIZ3_P6.F1
AND SIZ3_P3.F1 BETWEEN 1 AND 2 END-EXEC
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " code1 = 0"
DISPLAY " count1 is 4"
DISPLAY " Your answer is :"
DISPLAY " code1 is ", code1
DISPLAY " count1 is ", count1
if (code1 = 0 AND count1 = 4) then
EXEC SQL INSERT INTO TESTREPORT
VALUES('0376','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
EXEC SQL INSERT INTO TESTREPORT
VALUES('0376','fail','PCO') END-EXEC
ADD 1 TO errcnt
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr017.pco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
**************** END TEST 0376 **********
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
¤ Dauer der Verarbeitung: 0.27 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
