|
IDENTIFICATION DIVISION.
PROGRAM-ID. CDR030.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* EMBEDDED COBOL (file "CDR030.PCO")
****************************************************************
*
* COMMENT SECTION
*
* DATE 1992/08/06 EMBEDDED COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* CDR030.PCO
* WRITTEN BY: Joan Sullivan
*
* THIS ROUTINE TESTS SQLSTATE 23000
*
****************************************************************
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 uid PIC X(18).
01 uidx PIC X(18).
01 junkit PIC X(10).
01 CPNUM1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
EXEC SQL END DECLARE SECTION END-EXEC
01 ii PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NR-TAB.
05 NORMSQ PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "SUN" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
EXEC SQL SELECT USER INTO :uidx FROM SUN.ECCO END-EXEC
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid " expected. User ", uidx "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Embedded COBOL, cdr030.pco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0516 *******************
MOVE 1 TO flag
DISPLAY " TEST0516 "
DISPLAY " SQLSTATE = 23000: integrity constraint violation"
DISPLAY "Note: VALID implementation-defined subclass will
- " be"
DISPLAY " accepted instead of no-subclass value of 000
- " "
DISPLAY "Reference ANSI SQL-1992 10.6 "
DISPLAY " General Rule 4"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
*Testing referential integrity ERROR, parent missing
DISPLAY "INSERT INTO EMP VALUES"
DISPLAY " (41,'Tom','China Architecture',"
DISPLAY " 20,'Architecture',040553);"
MOVE "x" TO SQLSTATE
EXEC SQL INSERT INTO EMP VALUES
(41,'Tom','China Architecture',
20,'Architecture',040553) END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "Testing referential integrity ERROR, parent
- " missing"
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '23000'; its value is ",
SQLSTATE
DISPLAY " "
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NR-TAB NOT = "23000") then
MOVE 0 TO flag
END-IF
DISPLAY "-------------------------------------------------"
*Testing referential integrity ERROR, children exist
DISPLAY "DELETE FROM EMP"
DISPLAY " WHERE ENO = 21; "
MOVE "x" TO SQLSTATE
EXEC SQL DELETE FROM EMP
WHERE ENO = 21 END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "Testing referential integrity ERROR, children
- " exist"
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '23000'; its value is ",
SQLSTATE
DISPLAY " "
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NR-TAB NOT = "23000") then
MOVE 0 TO flag
END-IF
DISPLAY "-------------------------------------------------"
*Testing referential integrity ERROR, children exist
DISPLAY "UPDATE EMP"
DISPLAY " SET ENAME = 'Thomas' WHERE ENO = 21; "
MOVE "x" TO SQLSTATE
EXEC SQL UPDATE EMP
SET ENAME = 'Thomas'
WHERE ENO = 21 END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "Testing referential integrity ERROR, children
- " exist "
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '23000'; its value is ",
SQLSTATE
DISPLAY " "
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NR-TAB NOT = "23000") then
MOVE 0 TO flag
END-IF
DISPLAY "-------------------------------------------------"
*Testing unique constraint ERROR
DISPLAY " **** PRIMARY KEY (EMPNUM) **** "
DISPLAY "DELETE FROM STAFF7;"
DISPLAY "INSERT INTO STAFF7 (EMPNUM) VALUES ('XXX');"
EXEC SQL DELETE FROM STAFF7 END-EXEC
MOVE SQLCODE TO SQL-COD
MOVE "x" TO SQLSTATE
EXEC SQL INSERT INTO STAFF7 (EMPNUM) VALUES ('XXX')
END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '00000'; its value is ",
SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NR-TAB NOT = "00000") then
MOVE 0 TO flag
END-IF
MOVE "x" TO SQLSTATE
EXEC SQL INSERT INTO STAFF7 (EMPNUM) VALUES ('XXX')
END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "INSERT INTO STAFF7 (EMPNUM) VALUES ('XXX');"
DISPLAY "Testing unique constraint ERROR "
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '23000'; its value is ",
SQLSTATE
DISPLAY " "
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NR-TAB NOT = "23000") then
MOVE 0 TO flag
END-IF
DISPLAY "-------------------------------------------------"
*Testing unique constraint ERROR
DISPLAY " **** UNIQUE (PNUM) **** "
DISPLAY " DELETE FROM PROJ3;"
DISPLAY " INSERT INTO PROJ3 (PNUM) VALUES ('787');"
DISPLAY " INSERT INTO PROJ3 (PNUM) VALUES ('789');"
EXEC SQL DELETE FROM PROJ3 END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO PROJ3 (PNUM) VALUES ('787') END-EXEC
MOVE SQLCODE TO SQL-COD
MOVE "x" TO SQLSTATE
EXEC SQL INSERT INTO PROJ3 (PNUM) VALUES ('789') END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '00000'; its value is ",
SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NR-TAB NOT = "00000") then
MOVE 0 TO flag
END-IF
MOVE "x" TO SQLSTATE
EXEC SQL UPDATE PROJ3 SET PNUM = '787' WHERE PNUM = '789'
END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "UPDATE PROJ3 SET PNUM = '787' WHERE PNUM = '789';"
DISPLAY "Testing unique constraint ERROR "
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '23000'; its value is ",
SQLSTATE
DISPLAY " "
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NR-TAB NOT = "23000") then
MOVE 0 TO flag
END-IF
DISPLAY "-------------------------------------------------"
*Testing check constraint ERROR
DISPLAY " **** CHECK GRADE NOT IN (5,22) ****"
DISPLAY " DELETE FROM STAFF11;"
DISPLAY " INSERT INTO STAFF11"
DISPLAY " VALUES('E3','Susan',11,'Hawaii');"
EXEC SQL DELETE FROM STAFF11 END-EXEC
MOVE SQLCODE TO SQL-COD
MOVE "x" TO SQLSTATE
EXEC SQL INSERT INTO STAFF11
VALUES('E3','Susan',11,'Hawaii') END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '00000'; its value is ",
SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NR-TAB NOT = "00000") then
MOVE 0 TO flag
END-IF
MOVE "x" TO SQLSTATE
EXEC SQL UPDATE STAFF11
SET GRADE = 5
WHERE EMPNUM = 'E3' END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " UPDATE STAFF11"
DISPLAY " SET GRADE = 5"
DISPLAY " WHERE EMPNUM = 'E3';"
DISPLAY "Testing check constraint ERROR "
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '23000'; its value is ",
SQLSTATE
DISPLAY " "
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NR-TAB NOT = "23000") then
MOVE 0 TO flag
END-IF
DISPLAY "-------------------------------------------------"
*Testing check constraint ERROR
DISPLAY " ***** CHECK NOT EMPNAME LIKE 'T", " ****"
DISPLAY "UPDATE STAFF11"
DISPLAY " SET EMPNAME = 'Tom'"
DISPLAY " WHERE EMPNUM = 'E3';"
MOVE "x" TO SQLSTATE
EXEC SQL UPDATE STAFF11
SET EMPNAME = 'Tom'
WHERE EMPNUM = 'E3' END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "Testing check constraint ERROR"
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '23000'; its value is ",
SQLSTATE
DISPLAY " "
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NR-TAB NOT = "23000") then
MOVE 0 TO flag
END-IF
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
if (flag = 1) then
DISPLAY " *** pass *** "
EXEC SQL INSERT INTO SUN.TESTREPORT
VALUES('0516','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
else
DISPLAY " cdr030.pco *** fail *** "
EXEC SQL INSERT INTO SUN.TESTREPORT
VALUES('0516','fail','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "================================================"
******************** END TEST0516 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NR-TAB
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
MOVE 14 TO norm2
PERFORM P90 UNTIL norm2 > 36
if (NR-TAB = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
MOVE 1 TO norm2
PERFORM P89 UNTIL norm2 > 36
MOVE 5 TO norm1
*examining position 5 of char array NORMSQ
MOVE 1 TO norm2
PERFORM P88 UNTIL norm2 > 36
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQ(1) = "0" AND NORMSQ(2) = "1") then
MOVE "0" TO NORMSQ(2)
END-IF
GO TO EXIT-NOSUBCLASS
.
P90.
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
if (NORMSQ(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQ(norm1)
END-IF
ADD 1 TO norm2
.
P89.
*valid characters are 0-9, A-Z
if (NORMSQ(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQ(norm1)
END-IF
ADD 1 TO norm2
.
P88.
*valid characters are 0-9, A-Z
if (NORMSQ(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQ(norm1)
END-IF
ADD 1 TO norm2
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.22 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
