|
IDENTIFICATION DIVISION.
PROGRAM-ID. XTS716.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* EMBEDDED COBOL (file "XTS716.PCO")
*Copyright 1995 National Computing Centre Limited
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* XTS716.PCO
* WRITTEN BY: Manolis Megaloikonomou
* REVIEWED BY: Nickos Backalidis
*
* SET SESSION AUTHORIZATION to current auth-id.
*
* REFERENCES
* 16.4 -- <set session authorization identifier statement>
* 16.4 GR.1
* 16.4 LR.2a -- Raised. Entry SQL restriction that
* prohibits the use of any <set session
* authorization identifier statement>.
* 6.2 -- <value specification> and <target specification>
* 6.2 SR.3
* 6.2 GR.9
* 6.2 LR.2c -- Raised. Entry SQL restriction which
* prohibits the specification of CURRENT_USER,
* SYSTEM_USER or SESSION_USER in a
* <general value specification>.
* F#1 -- Dynamic SQL.
* F#32 -- User authorization.
*
* DATE LAST ALTERED 14/12/95 CTS5 Hand-over Test
*
* Cleanups and fixes by V. Kogakis 01/12/95
*
* QA Status: QA Check
*
* Revised by DWF 1/23/96
* Removed status code checks after cursor definition.
* Removed violations of 16.4 GR.1.
****************************************************************
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 coun PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 xuser PIC X(20).
01 sqlsm2 PIC X(31).
EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Embedded COBOL, xts716.pco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7016 *******************
MOVE 1 TO flag
DISPLAY " TEST7016 "
DISPLAY " SET SESSION AUTHORIZATION to current auth-id."
DISPLAY " References:"
DISPLAY " 16.4 --
- " statement>"
DISPLAY " 16.4 GR.1"
DISPLAY " 16.4 LR.2a -- Raised. Entry SQL restriction
- " that"
DISPLAY " prohibits the use of any
- " session"
DISPLAY " authorization identifier
- " statement>."
DISPLAY " 6.2 -- and
- " specification>"
DISPLAY " 6.2 SR.3"
DISPLAY " 6.2 GR.9"
DISPLAY " 6.2 LR.2c -- Raised. Entry SQL restriction
- " which"
DISPLAY " prohibits the specification of
- " CURRENT_USER,"
DISPLAY " SYSTEM_USER or SESSION_USER in
- " a"
DISPLAY " ."
DISPLAY " F#1 -- Dynamic SQL."
DISPLAY " F#32 -- User authorization."
DISPLAY " - - - - - - - - - - - - - - - - - - -"
*Preserve the original authorization identifier CTS1 into
*a host variable with padded leading and trailing spaces.
MOVE " CTS1 " TO xuser
DISPLAY "xuser = '", xuser, "'"
*Initialise error reporting variables
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*Ensure that the current authorization has access rights
*to table STAFF.
MOVE 99 TO coun
DISPLAY "SELECT COUNT(*) INTO :coun FROM CTS1.STAFF;"
EXEC SQL SELECT COUNT(*) INTO :coun FROM CTS1.STAFF
END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "Coun should be 5; its value is ", coun
if ( coun NOT = 5 ) then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Change the session authorization identifier to the
*value of host variable xuser
DISPLAY "SET SESSION AUTHORIZATION :xuser;"
EXEC SQL SET SESSION AUTHORIZATION :xuser END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Check for SELECT access rights in STAFF table
MOVE 99 TO coun
DISPLAY "SELECT COUNT(*) INTO :coun FROM CTS1.STAFF;"
EXEC SQL SELECT COUNT(*) INTO :coun FROM CTS1.STAFF
END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "Coun should be 5; its value is ", coun
if ( coun NOT = 5 ) then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "SET SESSION AUTHORIZATION USER;"
EXEC SQL SET SESSION AUTHORIZATION USER END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 99 TO coun
MOVE "SELECT COUNT(*) FROM CTS1.STAFF" TO sqlsm2
DISPLAY "sqlsm2 = """, sqlsm2, """"
DISPLAY "PREPARE S FROM :sqlsm2;"
EXEC SQL PREPARE S FROM :sqlsm2 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE ALPHA CURSOR FOR S;"
EXEC SQL DECLARE ALPHA CURSOR FOR S END-EXEC
DISPLAY "OPEN ALPHA;"
EXEC SQL OPEN ALPHA END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "FETCH ALPHA INTO :coun;"
EXEC SQL FETCH ALPHA INTO :coun END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "Coun should be 5; its value is ", coun
if ( coun NOT = 5 ) then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "CLOSE ALPHA;"
EXEC SQL CLOSE ALPHA END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "ROLLBACK WORK;"
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " xts716.pco *** pass *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7016','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
else
DISPLAY " xts716.pco *** fail *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7016','fail','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "========================================"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
******************** END TEST7016 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.6 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
