|
IDENTIFICATION DIVISION.
PROGRAM-ID. XTS744.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* EMBEDDED COBOL (file "XTS744.PCO")
*Copyright 1995 National Computing Centre Limited
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* XTS744.PCO
* WRITTEN BY: Nickos Backalidis TEST7044
* TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
*
* This routine tests
* Presence of SQL_CHARACTER in CHARACTER_SETS view
*
*
* REFERENCES
* 21.2.18 -- CHARACTER_SETS view
* 21.3.23 -- CHARACTER_SETS base table
* F#2 -- Basic Information schema
* F#46 -- Named character sets
*
* DATE LAST ALTERED 18/12/95 CTS5 Hand-over Test
*
* Cleanups and fixes by V. Kogakis 08/12/95
* Print timestamp
* Include Files
* Define NOSUBCLASS/CHCKOK at test beginning
*
* QA STATUS : QA CHECK
*
* Revised by DWF 1996-02-21
* Added FIPS notice
* Removed status checks after cursor definition
* Shortened init strings
* Removed field widths in printfs
* Clean up status check
* Corrected expected results
* Changed ind? to indic? for consistency
* Fixed references to non-existent columns
* Shortened variable names to meet coding rules
* Fixed print formats
****************************************************************
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 cssche PIC X(128).
01 csname PIC X(128).
01 nofcha PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ch_cat PIC X(128).
01 colcat PIC X(128).
01 colsch PIC X(128).
01 colnam PIC X(128).
01 indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic3 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic4 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Embedded COBOL, xts744.pco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7044 *******************
MOVE 1 TO flag
DISPLAY " FIPS TEST7044"
DISPLAY " Presence of SQL_CHARACTER in CHARACTER_SETS
- " view"
DISPLAY " References:"
DISPLAY " FIPS 16.7 -- Character set support"
DISPLAY " 21.2.18 -- CHARACTER_SETS view"
DISPLAY " 21.3.23 -- CHARACTER_SETS base table"
DISPLAY " F#2 -- Basic Information schema"
DISPLAY " F#46 -- Named character sets"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "Support for SQL_CHARACTER is only required by FIPS
- " 127-2,"
DISPLAY "not by SQL-92."
*Initialise error reporting variables
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxx" TO cssche
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxx" TO csname
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxx" TO ch_cat
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxx" TO colcat
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxx" TO colsch
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxx" TO colnam
MOVE 0 TO nofcha
MOVE 99 TO indic1
MOVE 99 TO indic2
MOVE 99 TO indic3
MOVE 99 TO indic4
DISPLAY "DECLARE F CURSOR FOR SELECT CHARACTER_SET_SCHEMA,"
DISPLAY
"CHARACTER_SET_NAME,NUMBER_OF_CHARACTERS,
- "CHARACTER_SET_CATALOG,"
DISPLAY "DEFAULT_COLLATE_CATALOG, DEFAULT_COLLATE_SCHEMA,"
DISPLAY "DEFAULT_COLLATE_NAME FROM
- " INFORMATION_SCHEMA.CHARACTER_SETS"
DISPLAY "WHERE CHARACTER_SET_SCHEMA = 'INFORMATION_SCHEMA'"
DISPLAY "AND CHARACTER_SET_NAME = 'SQL_CHARACTER';"
EXEC SQL DECLARE F CURSOR FOR SELECT CHARACTER_SET_SCHEMA,
CHARACTER_SET_NAME,NUMBER_OF_CHARACTERS,
CHARACTER_SET_CATALOG,DEFAULT_COLLATE_CATALOG,
DEFAULT_COLLATE_SCHEMA,DEFAULT_COLLATE_NAME FROM
INFORMATION_SCHEMA.CHARACTER_SETS
WHERE CHARACTER_SET_SCHEMA = 'INFORMATION_SCHEMA'
AND CHARACTER_SET_NAME = 'SQL_CHARACTER' END-EXEC
DISPLAY "OPEN F;"
EXEC SQL OPEN F END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Collation for SQL_CHARACTER is implementation-defined
*Now fetch the row from the view
DISPLAY "FETCH F INTO
- " :cssche,:csname,:nofcha,:ch_cat:indic1,"
DISPLAY ":colcat:indic2, :colsch, :colnam;"
EXEC SQL FETCH F INTO
:cssche,:csname,:nofcha,:ch_cat:indic1,
:colcat:indic2, :colsch:indic3, :colnam:indic4 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cssche should be INFORMATION_SCHEMA; its value is
- " ", cssche
DISPLAY "csname should be SQL_CHARACTER; its value is ",
csname
DISPLAY "nofcha should be 83; its value is ", nofcha
DISPLAY "indic1 should be 0; its value is ", indic1
DISPLAY "indic2 should be 0; its value is ", indic2
DISPLAY "indic3 should be 0; its value is ", indic3
DISPLAY "indic4 should be 0; its value is ", indic4
DISPLAY "ch_cat is ", ch_cat
DISPLAY "colcat is ", colcat
DISPLAY "colsch is ", colsch
DISPLAY "colnam is ", colnam
if (cssche NOT = "INFORMATION_SCHEMA") then
MOVE 0 TO flag
END-IF
if (csname NOT = "SQL_CHARACTER") then
MOVE 0 TO flag
END-IF
if (indic1 NOT = 0 OR indic2 NOT = 0 OR
nofcha NOT = 83) then
MOVE 0 TO flag
END-IF
if (indic3 NOT = 0 OR indic4 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*now close the cursor
DISPLAY "CLOSE F;"
EXEC SQL CLOSE F END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "ROLLBACK WORK;"
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*record results
if ( flag = 1 ) then
DISPLAY " xts744.pco *** pass *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7044','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
else
DISPLAY " xts744.pco *** fail *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7044','fail','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "========================================"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
******************** END TEST7044 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.22 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
