|
Quellcode-Bibliothek
© Kompilation durch diese Firma
[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]
Datei:
isi006.cob
Sprache: Cobol
|
|
IDENTIFICATION DIVISION.
PROGRAM-ID. XTS749.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* EMBEDDED COBOL (file "XTS749.PCO")
*Copyright 1995 National Computing Centre Limited
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* XTS749.PCO
* WRITTEN BY: Manolis Megaloikonomou
* TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
*
* Named table constraint in table definition.
*
* REFERENCES
* 11.3 -- <table definition>
* 11.6 -- <table constraint definition>.
* 11.6 SR.1
* 11.6 GR.2
* 11.6 LR.2a -- Raised. Entry SQL restriction which
* prohibits the use of a
* <constraint name definition>.
* 10.6 -- <constraint name definition> and
* <constraint attributes>
* 10.6 SR.1
* 10.6 SR.2
* 10.6 LR.2a -- Raised. Entry SQL restriction which
* prohibits the use of a
* <constraint name definition>.
* 11.7 -- <unique constraint definition>
* 11.8 -- <referential constraint definition>
* 11.9 -- <check constraint definition>
* F#2 -- Basic information schema.
* F#3 -- Basic schema manipulation.
* F#33 -- Constraint tables.
* F#49 -- Constraint management.
*
* DATE LAST ALTERED 18/12/95 CTS5 Hand-over Test
*
* Cleanups and fixes by V. Kogakis 08/12/95
* Print timestamp
* Include Files
* Define NOSUBCLASS/CHCKOK at test beginning
* Include string initialisation
* Clean-up database at the end of test
*
* QA Status: Full FC
*
* Revised by DWF 1996-02-15
* Cleanups
* Removed status checks after cursor definitions
* Fixed transactions
* Removed field widths from printfs
****************************************************************
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 coun PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 cname PIC X(29).
01 ctype PIC X(29).
EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Embedded COBOL, xts749.pco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7049 *******************
MOVE 1 TO flag
DISPLAY " TEST7049 "
DISPLAY " Named table constraint in table definition."
DISPLAY " References:"
DISPLAY " 11.3 -- "
DISPLAY " 11.6 -- "
DISPLAY " 11.6 SR.1"
DISPLAY " 11.6 GR.2"
DISPLAY " 11.6 LR.2a -- Raised. Entry SQL restriction
- " which"
DISPLAY " prohibits the use of a"
DISPLAY " ."
DISPLAY " 10.6 -- and"
DISPLAY " "
DISPLAY " 10.6 SR.1"
DISPLAY " 10.6 SR.2"
DISPLAY " 10.6 LR.2a -- Raised. Entry SQL restriction
- " which"
DISPLAY " prohibits the use of a"
DISPLAY " ."
DISPLAY " 11.7 -- "
DISPLAY " 11.8 -- "
DISPLAY " 11.9 -- "
DISPLAY " F#2 -- Basic information schema."
DISPLAY " F#3 -- Basic schema manipulation."
DISPLAY " F#33 -- Constraint tables."
DISPLAY " F#49 -- Constraint management."
DISPLAY " - - - - - - - - - - - - - - - - - - -"
*Initialise error reporting variables
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*Create table TEST12649
DISPLAY "CREATE TABLE TEST12649"
DISPLAY " (TNUM1 NUMERIC(5),"
DISPLAY " TNUM2 NUMERIC(5),"
DISPLAY " TCHAR CHAR(3),"
DISPLAY " CONSTRAINT CND12649A PRIMARY KEY(TNUM1, TNUM2),"
DISPLAY " CONSTRAINT CND12649B CHECK(TNUM2 > 0),"
DISPLAY " CONSTRAINT CND12649C FOREIGN KEY(TCHAR)"
DISPLAY " REFERENCES STAFF(EMPNUM));"
EXEC SQL CREATE TABLE TEST12649
(TNUM1 NUMERIC(5),
TNUM2 NUMERIC(5),
TCHAR CHAR(3),
CONSTRAINT CND12649A PRIMARY KEY(TNUM1, TNUM2),
CONSTRAINT CND12649B CHECK(TNUM2 > 0),
CONSTRAINT CND12649C FOREIGN KEY(TCHAR)
REFERENCES STAFF(EMPNUM)) END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 999 TO coun
DISPLAY "SELECT COUNT(*) INTO :coun"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE CONSTRAINT_SCHEMA = 'CTS1' AND TABLE_SCHEMA
- " = 'CTS1'"
DISPLAY "AND TABLE_NAME = 'TEST12649';"
EXEC SQL SELECT COUNT(*) INTO :coun
FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
WHERE CONSTRAINT_SCHEMA = 'CTS1' AND TABLE_SCHEMA =
'CTS1'
AND TABLE_NAME = 'TEST12649' END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "Count should be 3; its value is ", coun
if ( coun NOT = 3 ) then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "DECLARE a CURSOR FOR SELECT CONSTRAINT_NAME,
- " CONSTRAINT_TYPE"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE CONSTRAINT_SCHEMA = 'CTS1' AND TABLE_SCHEMA
- " = 'CTS1'"
DISPLAY "AND TABLE_NAME = 'TEST12649'"
DISPLAY "ORDER BY CONSTRAINT_NAME;"
EXEC SQL DECLARE a CURSOR FOR SELECT CONSTRAINT_NAME,
CONSTRAINT_TYPE
FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
WHERE CONSTRAINT_SCHEMA = 'CTS1' AND TABLE_SCHEMA =
'CTS1'
ORDER BY CONSTRAINT_NAME END-EXEC
DISPLAY "OPEN a;"
EXEC SQL OPEN a END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO cname
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO ctype
DISPLAY "FETCH a INTO :cname, :ctype;"
EXEC SQL FETCH a INTO :cname, :ctype END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cname should be CND12549A; its value is ", cname
DISPLAY "ctype should be PRIMARY KEY; its value is ", ctype
if (cname NOT = "CND12549A" OR ctype NOT =
"PRIMARY KEY") then
MOVE 0 TO flag
END-IF
DISPLAY " "
*Initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO cname
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO ctype
DISPLAY "FETCH a INTO :cname, :ctype;"
EXEC SQL FETCH a INTO :cname, :ctype END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cname should be CND12549B; its value is ", cname
DISPLAY "ctype should be CHECK; its value is ", ctype
if (cname NOT = "CND12549B" OR ctype NOT =
"CHECK") then
MOVE 0 TO flag
END-IF
DISPLAY " "
*Initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO cname
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO ctype
DISPLAY "FETCH a INTO :cname, :ctype;"
EXEC SQL FETCH a INTO :cname, :ctype END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cname should be CND12549C; its value is ", cname
DISPLAY "ctype should be FOREIGN KEY; its value is ", ctype
if (cname NOT = "CND12549C" OR ctype NOT =
"FOREIGN KEY") then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "CLOSE a;"
EXEC SQL CLOSE a END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Clean-up database
DISPLAY "DROP TABLE TEST12649 CASCADE;"
EXEC SQL DROP TABLE TEST12649 CASCADE END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " xts749.pco *** pass *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7049','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
else
DISPLAY " xts749.pco *** fail *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7049','fail','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "========================================"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
******************** END TEST7049 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.29 Sekunden
(vorverarbeitet)
¤
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
| |
