|
IDENTIFICATION DIVISION.
PROGRAM-ID. XTS767.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* EMBEDDED COBOL (file "XTS767.PCO")
*Copyright 1995 National Computing Centre Limited
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* XTS767.PCO
* WRITTEN BY: Nickos Backalidis
* TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
*
* Drop character, outstanding granted privileges
*
* REFERENCES
* 11.29 -- <Drop character set statement>
* TC#1 -- 11.29
* 11.29 GR.1
* 11.29 SR.3
* 11.37 -- <revoke statement>
* F#2 -- Basic Information Schema
* F#3 -- Basic Schema Manipulation
* F#32 -- User authorization
* F#45 -- Character set definition.
*
* DATE LAST ALTERED 18/12/95 CTS5 Hand-over Test
*
* Cleanups and fixes by V. Kogakis 18/12/95
* Print timestamp
* Include Files
* Define NOSUBCLASS/CHCKOK at test beginning
*
* QA STATUS : QA CHECK
*
* Revised by DWF 1996-02-26
* Fixed schema references
* Removed field widths from printfs
* Fixed SDL transactions
* Feedback on imp-defined SQLSTATEs
* Removed SQL syntax errors, cleaned up syntax
****************************************************************
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 coun PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Embedded COBOL, xts767.pco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7067 *******************
MOVE 1 TO flag
DISPLAY " TEST7067"
DISPLAY " DROP character set, outstanding granted
- " privileges"
DISPLAY " References:"
DISPLAY " 11.29 -- "
DISPLAY " 11.29 GR.1"
DISPLAY " 11.29 SR.3 "
DISPLAY " 11.37 -- "
DISPLAY " F#2 -- Basic Information Schema"
DISPLAY " F#3 -- Basic schema manipulation"
DISPLAY " F#32 -- User authorization "
DISPLAY " F#45 -- Character set definition "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "This test attempts to change session
- " authorizations. Because"
DISPLAY "authorizations are implementation-defined, this
- " test may need"
DISPLAY "modification. The following actions may help to
- " pass the test:"
DISPLAY " -- Change the initial authid to an authid with
- " DBA privileges"
DISPLAY " -- Insert code to work around
- " implementation-defined"
DISPLAY " authentication mechanisms (e.g. to reconnect
- " with a"
DISPLAY " different authid)."
DISPLAY "It might not be possible to change the session
- " authorization,"
DISPLAY "as explained in 16.4 GR.4. In this case, the
- " restrictions that"
DISPLAY "render it impossible should be documented and the
- " test assumed"
DISPLAY "to be passed."
*Initialise error reporting variables
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*create a character set under the current schema
DISPLAY "CREATE CHARACTER SET TESTSET GET SQL_TEXT;"
EXEC SQL CREATE CHARACTER SET TESTSET GET SQL_TEXT END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*grant privileges for TESTSET on user CTS3
DISPLAY "GRANT USAGE ON CHARACTER SET TESTSET TO CTS3;"
EXEC SQL GRANT USAGE ON CHARACTER SET TESTSET TO CTS3
END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*now change to user CTS3 and create a table based on
*character set TESTSET
DISPLAY "SET SESSION AUTHORIZATION 'CTS3';"
EXEC SQL SET SESSION AUTHORIZATION 'CTS3' END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "CREATE TABLE TEMP767 "
DISPLAY " ( COLCH1 CHAR(10) CHARACTER SET CTS1.TESTSET,"
DISPLAY " COLCH2 CHAR(5) CHARACTER SET CTS1.TESTSET);"
EXEC SQL CREATE TABLE TEMP767
( COLCH1 CHAR(10) CHARACTER SET CTS1.TESTSET,
COLCH2 CHAR(5) CHARACTER SET CTS1.TESTSET) END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*now change back to CTS1
DISPLAY "SET SESSION AUTHORIZATION 'CTS1';"
EXEC SQL SET SESSION AUTHORIZATION 'CTS1' END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*now attempt to drop the character set
DISPLAY "DROP CHARACTER SET TESTSET;"
EXEC SQL DROP CHARACTER SET TESTSET END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*now change to user CTS3 and and destroy table TEMP767
DISPLAY "SET SESSION AUTHORIZATION 'CTS3';"
EXEC SQL SET SESSION AUTHORIZATION 'CTS3' END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE TEMP767 CASCADE;"
EXEC SQL DROP TABLE TEMP767 CASCADE END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*now change to CTS1 and drop TESTSET. This should now
*work with no side effects and normal behaviour
DISPLAY "SET SESSION AUTHORIZATION 'CTS1';"
EXEC SQL SET SESSION AUTHORIZATION 'CTS1' END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*now drop the character set
DISPLAY "DROP CHARACTER SET TESTSET;"
EXEC SQL DROP CHARACTER SET TESTSET END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*now access the CHARACTER_SETS view and check that
*there exist no rows where the char set TESTSET is
*identified
MOVE 4 TO coun
DISPLAY "SELECT COUNT(*) INTO :coun "
DISPLAY "FROM INFORMATION_SCHEMA.CHARACTER_SETS "
DISPLAY "WHERE CHARACTER_SET_SCHEMA = 'CTS1' "
DISPLAY "AND CHARACTER_SET_NAME = 'TESTSET';"
EXEC SQL SELECT COUNT(*) INTO :coun
FROM INFORMATION_SCHEMA.CHARACTER_SETS
WHERE CHARACTER_SET_SCHEMA = 'CTS1'
AND CHARACTER_SET_NAME = 'TESTSET' END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "coun should be 0; its value is ", coun
if (coun NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*initialise host variables to values <> 0 since zeros
*are expected to be returned by all COUNTs
MOVE 9 TO coun
*now access the USAGE_PRIVILEGES view
DISPLAY "SELECT COUNT(*) INTO :coun"
DISPLAY " FROM INFORMATION_SCHEMA.USAGE_PRIVILEGES"
DISPLAY " WHERE OBJECT_SCHEMA = 'CTS1'"
DISPLAY " AND OBJECT_TYPE = 'CHARACTER SET'"
DISPLAY " AND OBJECT_NAME = 'TESTSET';"
EXEC SQL SELECT COUNT(*) INTO :coun
FROM INFORMATION_SCHEMA.USAGE_PRIVILEGES
WHERE OBJECT_SCHEMA = 'CTS1'
AND OBJECT_TYPE = 'CHARACTER SET'
AND OBJECT_NAME = 'TESTSET' END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "coun should be 0; its value is ", coun
if (coun NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "ROLLBACK WORK;"
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*now record results
if ( flag = 1 ) then
DISPLAY " xts767.pco *** pass *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7067','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
else
DISPLAY " xts767.pco *** fail *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7067','fail','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "========================================"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
******************** END TEST7067 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.13 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
