|
Quellcode-Bibliothek
© Kompilation durch diese Firma
[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]
Datei:
yts764.cob
Sprache: Cobol
|
|
IDENTIFICATION DIVISION.
PROGRAM-ID. YTS764.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* EMBEDDED COBOL (file "YTS764.PCO")
*Copyright 1996 National Computing Centre Limited,
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* YTS764.PCO
* WRITTEN BY: Susan Watters
* TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
*
* <query expression> with UNION ALL CORRESPONDING BY
*
*
* REFERENCES
* 7.10 <query expression>
* 7.10 SR.9a
* 7.10 SR.10a
* 7.10 GR1.b
* 7.3 <table expression>
* 13.1 <declare cursor >
* F#30 Table operations
*
* DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
* Program updated to replace derived table - 8th December 1995
*
* QA Status: Full FC
*
* Revised by DWF 1996-03-08
* Added rollback after authid
* Made # columns match # values inserted
* Fixed expected results
****************************************************************
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 i PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 h PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 s PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Embedded COBOL, yts764.pco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7519 *******************
*initialise all variables
MOVE 1 TO flag
DISPLAY " TEST7519 "
DISPLAY " with UNION ALL CORRESPONDING
- " BY"
DISPLAY "References:"
DISPLAY " 7.10 "
DISPLAY " 7.10 SR.9a"
DISPLAY " 7.10 SR.10a"
DISPLAY " 7.10 GR.1b"
DISPLAY " 7.3 "
DISPLAY " 13.1 "
DISPLAY " F#30 Table operations"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "DELETE FROM CTS1.ET;"
EXEC SQL DELETE FROM CTS1.ET END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " "
*inserted into CTS1.STAFFb :
*are three or more copies of some rows,
*two copies of other rows and some rows that are not duplicated
*For rows that are not duplicated some rows are included which
*would be duplicates if only the corresponding rows were conside
*Inserted into CTS1.STAFFa are :
*some rows which are duplicates of rows in CTS1.STAFFb
*considering only corresponding rows
*Some cases are included where the multiplicity of rows is more
*equal to and less than the multiplicity of that row in
*CTS1.STAFFb
*return no of rows in tables
MOVE 0 TO i
DISPLAY "Check the correct number of rows have been
- " inserted"
DISPLAY "SELECT COUNT (*) INTO :i FROM CTS1.STAFFb;"
EXEC SQL SELECT COUNT (*) INTO :i FROM CTS1.STAFFb END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "i should be 12; its value is ", i
if (i NOT = 12) then
MOVE 0 TO flag
END-IF
*reinitialise host variable
MOVE 0 TO i
DISPLAY "SELECT COUNT (*) INTO :i FROM CTS1.STAFFa;"
EXEC SQL SELECT COUNT (*) INTO :i FROM CTS1.STAFFa END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "i should be 12; its value is ", i
if (i NOT = 12) then
MOVE 0 TO flag
END-IF
*define cursor
DISPLAY "INSERT INTO CTS1.ET (col5, col6)"
DISPLAY "SELECT * FROM CTS1.STAFFB"
DISPLAY "UNION ALL CORRESPONDING BY (hours, salary)"
DISPLAY "SELECT * FROM CTS1.STAFFA;"
EXEC SQL INSERT INTO CTS1.ET (col5, col6)
SELECT * FROM CTS1.STAFFB
UNION ALL CORRESPONDING BY (hours, salary)
SELECT * FROM CTS1.STAFFA END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Hours Salary
*24 rows
DISPLAY "DECLARE data64 CURSOR FOR"
DISPLAY "SELECT COUNT (*), col5, col6"
DISPLAY "FROM CTS1.ET"
DISPLAY "GROUP BY col6, col5"
DISPLAY "ORDER BY 2,3;"
EXEC SQL DECLARE data64 CURSOR FOR
SELECT COUNT (*), col5, col6
FROM CTS1.ET
GROUP BY col6, col5
ORDER BY 2,3 END-EXEC
*open cursor
DISPLAY "OPEN data64;"
EXEC SQL OPEN data64 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 0 TO i
MOVE 0 TO h
MOVE 0 TO s
DISPLAY "FETCH data64 INTO :i, :h, :s"
EXEC SQL FETCH data64 INTO :i, :h, :s END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "i should be 1; its value is ", i
DISPLAY "h should be 15; its value is ", h
DISPLAY "s should be 7000; its value is ", s
if (i NOT = 1 OR h NOT = 15 OR s NOT = 7000) then
MOVE 0 TO flag
END-IF
MOVE 0 TO i
MOVE 0 TO h
MOVE 0 TO s
DISPLAY "FETCH data64 INTO :i, :h, :s"
EXEC SQL FETCH data64 INTO :i, :h, :s END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "i should be 1; its value is ", i
DISPLAY "h should be 30; its value is ", h
DISPLAY "s should be 8000; its value is ", s
if (i NOT = 1 OR h NOT = 30 OR s NOT = 8000) then
MOVE 0 TO flag
END-IF
MOVE 0 TO i
MOVE 0 TO h
MOVE 0 TO s
DISPLAY "FETCH data64 INTO :i, :h, :s"
EXEC SQL FETCH data64 INTO :i, :h, :s END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "i should be 3; its value is ", i
DISPLAY "h should be 30; its value is ", h
DISPLAY "s should be 20000; its value is ", s
if (i NOT = 3 OR h NOT = 30 OR s NOT = 20000)
then
MOVE 0 TO flag
END-IF
MOVE 0 TO i
MOVE 0 TO h
MOVE 0 TO s
DISPLAY "FETCH data64 INTO :i, :h, :s"
EXEC SQL FETCH data64 INTO :i, :h, :s END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "i should be 2; its value is ", i
DISPLAY "h should be 35; its value is ", h
DISPLAY "s should be 15000; its value is ", s
if (i NOT = 2 OR h NOT = 35 OR s NOT = 15000)
then
MOVE 0 TO flag
END-IF
MOVE 0 TO i
MOVE 0 TO h
MOVE 0 TO s
DISPLAY "FETCH data64 INTO :i, :h, :s"
EXEC SQL FETCH data64 INTO :i, :h, :s END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "i should be 9; its value is ", i
DISPLAY "h should be 40; its value is ", h
DISPLAY "s should be 10000; its value is ", s
if (i NOT = 9 OR h NOT = 40 OR s NOT = 10000)
then
MOVE 0 TO flag
END-IF
MOVE 0 TO i
MOVE 0 TO h
MOVE 0 TO s
DISPLAY "FETCH data64 INTO :i, :h, :s"
EXEC SQL FETCH data64 INTO :i, :h, :s END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "i should be 2; its value is ", i
DISPLAY "h should be 60; its value is ", h
DISPLAY "s should be 45000; its value is ", s
if (i NOT = 2 OR h NOT = 60 OR s NOT = 45000)
then
MOVE 0 TO flag
END-IF
MOVE 0 TO i
MOVE 0 TO h
MOVE 0 TO s
DISPLAY "FETCH data64 INTO :i, :h, :s"
EXEC SQL FETCH data64 INTO :i, :h, :s END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "i should be 6; its value is ", i
DISPLAY "h should be 70; its value is ", h
DISPLAY "s should be 40000; its value is ", s
if (i NOT = 6 OR h NOT = 70 OR s NOT = 40000)
then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE data64"
EXEC SQL CLOSE data64 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "ROLLBACK WORK;"
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts764.pco *** pass *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7519','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts764.pco *** fail *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7519','fail','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
******************** END TEST7519 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.30 Sekunden
(vorverarbeitet)
¤
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
|
|
