|
IDENTIFICATION DIVISION.
PROGRAM-ID. YTS775.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* EMBEDDED COBOL (file "YTS775.PCO")
*Copyright 1996 National Computing Centre Ltd,
*and Computer Logic R&D S.A
*on behalf of CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* YTS775.PCO
* WRITTEN BY: Susan Watters
* TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
*
* SQL host program with duplicate local variable names
*
*
* REFERENCES
* COBOL standard, X3.23-1985
* SECTION X: INTER-PROGRAM COMMUNICATION MODULE, level 2
* This test requires compiler support for high subset of COBOL
* inter-program communication, level 2.
*
* 19.1 <embedded SQL host program>
* 19.1 SR1 multiple SQL <embedded SQL declare section>s
* permitted
* 19.1 LR2b)
* F#36 Subprogram support
*
* DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
*
* QA Status: Full FC
*
* Revised by DWF 1996-03-14
* Added rollback after authid
* Removed EXEC SQL from inside printfs
* Changed printouts
****************************************************************
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 x1 PIC X(3).
01 uid PIC X(18).
01 uidx PIC X(18).
EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 y1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 y2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Embedded COBOL, yts775.pco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7557 *******************
MOVE 1 TO flag
DISPLAY " TEST7557 "
DISPLAY " SQL host prog. with duplicate local variable
- " names"
DISPLAY "References:"
DISPLAY " 19.1 "
DISPLAY " 19.1 SR1 multiple SQL
- " sections>"
DISPLAY " permitted"
DISPLAY " 19.1 LR2b)"
DISPLAY " F#36 Subprogram support"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "* IN MAIN PROGRAM *"
*Initialise global variables
MOVE "yyy" TO x1
MOVE 100000 TO y1
MOVE 999999 TO y2
*assign val to x1 in main program
DISPLAY "Assign val to global variable x1"
DISPLAY "SELECT EMPNUM INTO :x1 FROM CTS1.STAFF"
DISPLAY "WHERE EMPNAME = 'Alice';"
EXEC SQL SELECT EMPNUM INTO :x1 FROM CTS1.STAFF
WHERE EMPNAME = 'Alice' END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "x1 should be E1; its value is ", x1
if (x1 NOT = "E1") then
MOVE 0 TO flag
END-IF
MOVE -777 to SQLCODE
MOVE "77777" TO SQLSTATE
CALL "SUB-ONE" USING SQLCODE y1 SQLSTATE
DISPLAY "* IN MAIN PROGRAM *"
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE and SQLSTATE should be changed."
DISPLAY "SQLCODE should be -111; its value is ",SQL-COD
DISPLAY
"SQLSTATE should be 11111; its value is ",SQLSTATE
if (SQLCODE NOT = -111 OR SQLSTATE NOT = "11111") then
MOVE 0 to flag
END-IF
DISPLAY
"Check global variable x1 not changed by subroutine"
DISPLAY "x1 should be E1; its value is ", x1
if (x1 NOT = "E1") then
MOVE 0 TO flag
END-IF
MOVE -777 to SQLCODE
MOVE "77777" TO SQLSTATE
CALL "SUB-TWO" USING y2
DISPLAY "* IN MAIN PROGRAM *"
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE and SQLSTATE should NOT be changed."
DISPLAY "SQLCODE should be -777; its value is ",SQL-COD
DISPLAY "SQLSTATE should be 77777; its value is ",SQLSTATE
if (SQLCODE NOT = -777 OR SQLSTATE NOT = "77777") then
MOVE 0 to flag
END-IF
DISPLAY "Value returned from first subroutine should be 15"
DISPLAY "Value is ", y1
DISPLAY "Value returned from second subroutine should be 30"
DISPLAY "Value is ", y2
if (y1 NOT = 15 OR y2 NOT = 30) then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts775.pco *** pass *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7557','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts775.pco *** fail *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7557','fail','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
******************** END TEST7557 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
* This test requires compiler support for high subset of COBOL
* inter-program communication, level 2.
IDENTIFICATION DIVISION.
PROGRAM-ID. SUB-ONE.
ENVIRONMENT DIVISION.
DATA DIVISION.
WORKING-STORAGE SECTION.
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 x1 PIC X(3).
EXEC SQL END DECLARE SECTION END-EXEC
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
LINKAGE SECTION.
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLSTATE PIC X(5).
01 y3 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQLCODE PIC S9(9) COMP.
EXEC SQL END DECLARE SECTION END-EXEC
PROCEDURE DIVISION USING SQLCODE, y3, SQLSTATE.
P0.
DISPLAY "* In SUBPROGRAM 1*"
*initialise variables y3, SQLCODE, SQLSTATE
MOVE 99 TO y3
MOVE -111 to SQLCODE
MOVE "11111" to SQLSTATE
DISPLAY "Initialize linkage variables:"
DISPLAY " y3, SQLCODE, SQLSTATE"
DISPLAY "SELECT HOURS INTO :y3"
DISPLAY "FROM CTS1.STAFFa"
DISPLAY "WHERE EMPNUM = 'E9'"
EXEC SQL SELECT HOURS INTO :y3
FROM CTS1.STAFFa
WHERE EMPNUM = 'E9' END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY
"SQLSTATE should be 00000; its value is ", SQLSTATE
DISPLAY "y3 should be 15; its value is ", y3
if SQLCODE = -111 or SQLSTATE = '11111'
then MOVE -444 TO y3
END-IF
*initialise subroutine var x1
MOVE "zzz" TO x1
DISPLAY "Declare cursor to assign val to subroutine
- " variable x1"
DISPLAY "DECLARE func1 CURSOR FOR"
DISPLAY "SELECT EMPNUM FROM CTS1.STAFF"
DISPLAY "WHERE EMPNAME = 'Betty';"
EXEC SQL DECLARE func1 CURSOR FOR
SELECT EMPNUM FROM CTS1.STAFF
WHERE EMPNAME = 'Betty' END-EXEC
DISPLAY "OPEN func1;"
EXEC SQL OPEN func1 END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " "
*fetch cursor vals
DISPLAY "FETCH func1 INTO :x1;"
EXEC SQL FETCH func1 INTO :x1 END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "x1 should be E2; its value is ", x1
if (x1 NOT = "E2") then
MOVE -555 TO y3
END-IF
*close cursor
DISPLAY "CLOSE func1"
EXEC SQL CLOSE func1 END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " "
MOVE -111 to SQLCODE
MOVE "11111" to SQLSTATE
DISPLAY "EXIT SUBROUTINE 1"
.
SUB-ONE-EXIT.
EXIT PROGRAM.
END PROGRAM SUB-ONE.
* This test requires compiler support for high subset of COBOL
* inter-program communication, level 2.
IDENTIFICATION DIVISION.
PROGRAM-ID. SUB-TWO.
ENVIRONMENT DIVISION.
DATA DIVISION.
WORKING-STORAGE SECTION.
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
EXEC SQL END DECLARE SECTION END-EXEC
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
LINKAGE SECTION.
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 y3 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
EXEC SQL END DECLARE SECTION END-EXEC
PROCEDURE DIVISION USING y3.
P0.
DISPLAY "* IN SUBROUTINE 2 *"
*initialise variables y3, SQLCODE, SQLSTATE
MOVE -222 to SQLCODE
MOVE "22222" to SQLSTATE
MOVE 100 TO y3
DISPLAY "declare cursor to assign value to linkage var
- " y3"
DISPLAY "DECLARE func2 CURSOR FOR"
DISPLAY "SELECT HOURS FROM CTS1.STAFFa"
DISPLAY "WHERE EMPNUM = 'E8';"
EXEC SQL DECLARE func2 CURSOR FOR
SELECT HOURS FROM CTS1.STAFFa
WHERE EMPNUM = 'E8' END-EXEC
DISPLAY "OPEN func2;"
EXEC SQL OPEN func2 END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " "
*fetch value in cursor
DISPLAY "FETCH func2 INTO :y3;"
EXEC SQL FETCH func2 INTO :y3 END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY
"SQLSTATE should be 00000; its value is ", SQLSTATE
DISPLAY "y3 should be 30; its value is ", y3
if SQLCODE = -222 or SQLSTATE = '22222'
then MOVE -555 TO y3
END-IF
*close cursor
DISPLAY "CLOSE func2;"
EXEC SQL CLOSE func2 END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " "
DISPLAY "EXIT SUBROUTINE 2"
.
SUB-TWO-EXIT.
EXIT PROGRAM.
END PROGRAM SUB-TWO.
END PROGRAM YTS775.
¤ Dauer der Verarbeitung: 0.29 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
