Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Android/bionic/bionic/libc/arch-x86/string/   (Android Betriebssystem Version 17©)  Datei vom 26.5.2026 mit Größe 12 kB image not shown  

Quelle  sse2-memmove-slm.S

  Sprache: Sparc
 

/*
Copyright (c) 2014, Intel Corporation
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

    * Redistributions of source code must retain the above copyright notice,
    * this list of conditions and the following disclaimer.

    * Redistributions in binary form must reproduce the above copyright notice,
    * this list of conditions and the following disclaimer in the documentation
    * and/or other materials provided with the distribution.

    * Neither the name of Intel Corporation nor the names of its contributors
    * may be used to endorse or promote products derived from this software
    * without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/


#define FOR_SILVERMONT

#ifndef MEMMOVE
# define MEMMOVE memmove
#endif

#ifndef L
# define L(label) .L##label
#endif

#ifndef cfi_startproc
# define cfi_startproc .cfi_startproc
#endif

#ifndef cfi_endproc
# define cfi_endproc .cfi_endproc
#endif

#ifndef cfi_rel_offset
# define cfi_rel_offset(reg, off) .cfi_rel_offset reg, off
#endif

#ifndef cfi_restore
# define cfi_restore(reg) .cfi_restore reg
#endif

#ifndef cfi_adjust_cfa_offset
# define cfi_adjust_cfa_offset(off) .cfi_adjust_cfa_offset off
#endif

#ifndef ENTRY
# define ENTRY(name)  \
 .type name,  @function;  \
 .globl name;  \
 .p2align 4;  \
name:  \
 cfi_startproc
#endif

#ifndef END
# define END(name)  \
 cfi_endproc;  \
 .size name, .-name
#endif

#define DEST  PARMS
#define SRC  DEST+4
#define LEN  SRC+4

#define CFI_PUSH(REG)  \
  cfi_adjust_cfa_offset (4);  \
  cfi_rel_offset (REG, 0)

#define CFI_POP(REG)  \
  cfi_adjust_cfa_offset (-4);  \
  cfi_restore (REG)

#define PUSH(REG) pushl REG; CFI_PUSH (REG)
#define POP(REG) popl REG; CFI_POP (REG)

#define PARMS  8  /* Preserve EBX.  */
#define ENTRANCE PUSH (%ebx);
#define RETURN_END POP (%ebx); ret
#define RETURN  RETURN_END; CFI_PUSH (%ebx)

#define SETUP_PIC_REG(x) call __x86.get_pc_thunk.x

 .section .text.sse2,"ax",@progbits
ENTRY (__memcpy_chk)
/* NOTE: We can't use LEN here because ebx has not been pushed yet. */
 movl 12(%esp), %ecx
 cmpl 16(%esp), %ecx
 ja __memcpy_chk_fail
/* Fall through to memcpy/memmove. */
END (__memcpy_chk)
ENTRY (MEMMOVE)
 ENTRANCE
 movl LEN(%esp), %ecx
 movl SRC(%esp), %eax
 movl DEST(%esp), %edx

/* Check whether we should copy backward or forward.  */
 cmp %eax, %edx
 je L(mm_return)
 jg L(mm_len_0_or_more_backward)

/* Now do checks for lengths. We do [0..16], [0..32], [0..64], [0..128]
separately.  */

 cmp $16, %ecx
 jbe L(mm_len_0_16_bytes_forward)

 cmpl $32, %ecx
 ja L(mm_len_32_or_more_forward)

/* Copy [0..32] and return.  */
 movdqu (%eax), %xmm0
 movdqu -16(%eax, %ecx), %xmm1
 movdqu %xmm0, (%edx)
 movdqu %xmm1, -16(%edx, %ecx)
 jmp L(mm_return)

L(mm_len_32_or_more_forward):
 cmpl $64, %ecx
 ja L(mm_len_64_or_more_forward)

/* Copy [0..64] and return.  */
 movdqu (%eax), %xmm0
 movdqu 16(%eax), %xmm1
 movdqu -16(%eax, %ecx), %xmm2
 movdqu -32(%eax, %ecx), %xmm3
 movdqu %xmm0, (%edx)
 movdqu %xmm1, 16(%edx)
 movdqu %xmm2, -16(%edx, %ecx)
 movdqu %xmm3, -32(%edx, %ecx)
 jmp L(mm_return)

L(mm_len_64_or_more_forward):
 cmpl $128, %ecx
 ja L(mm_len_128_or_more_forward)

/* Copy [0..128] and return.  */
 movdqu (%eax), %xmm0
 movdqu 16(%eax), %xmm1
 movdqu 32(%eax), %xmm2
 movdqu 48(%eax), %xmm3
 movdqu -64(%eax, %ecx), %xmm4
 movdqu -48(%eax, %ecx), %xmm5
 movdqu -32(%eax, %ecx), %xmm6
 movdqu -16(%eax, %ecx), %xmm7
 movdqu %xmm0, (%edx)
 movdqu %xmm1, 16(%edx)
 movdqu %xmm2, 32(%edx)
 movdqu %xmm3, 48(%edx)
 movdqu %xmm4, -64(%edx, %ecx)
 movdqu %xmm5, -48(%edx, %ecx)
 movdqu %xmm6, -32(%edx, %ecx)
 movdqu %xmm7, -16(%edx, %ecx)
 jmp L(mm_return)

L(mm_len_128_or_more_forward):
 PUSH (%esi)
 PUSH (%edi)

/* Aligning the address of destination.  */
 movdqu (%eax), %xmm0
 movdqu 16(%eax), %xmm1
 movdqu 32(%eax), %xmm2
 movdqu 48(%eax), %xmm3

 leal 64(%edx), %edi
 andl $-64, %edi
 subl %edx, %eax

 movdqu (%eax, %edi), %xmm4
 movdqu 16(%eax, %edi), %xmm5
 movdqu 32(%eax, %edi), %xmm6
 movdqu 48(%eax, %edi), %xmm7

 movdqu %xmm0, (%edx)
 movdqu %xmm1, 16(%edx)
 movdqu %xmm2, 32(%edx)
 movdqu %xmm3, 48(%edx)
 movdqa %xmm4, (%edi)
 movaps %xmm5, 16(%edi)
 movaps %xmm6, 32(%edi)
 movaps %xmm7, 48(%edi)
 addl $64, %edi

 leal (%edx, %ecx), %ebx
 andl $-64, %ebx
 cmp %edi, %ebx
 jbe L(mm_copy_remaining_forward)

 PUSH(%ebx)
 SETUP_PIC_REG(bx)
 add $_GLOBAL_OFFSET_TABLE_, %ebx
 cmp __x86_shared_cache_size_half@GOTOFF(%ebx), %ecx
 /* Restore ebx. We can place a pop before jump as it doesn't affect any flags. */
 POP(%ebx)

 jae L(mm_large_page_loop_forward)

 .p2align 4
L(mm_main_loop_forward):

 prefetcht0 128(%eax, %edi)

 movdqu (%eax, %edi), %xmm0
 movdqu 16(%eax, %edi), %xmm1
 movdqu 32(%eax, %edi), %xmm2
 movdqu 48(%eax, %edi), %xmm3
 movdqa %xmm0, (%edi)
 movaps %xmm1, 16(%edi)
 movaps %xmm2, 32(%edi)
 movaps %xmm3, 48(%edi)
 leal 64(%edi), %edi
 cmp %edi, %ebx
 ja L(mm_main_loop_forward)

L(mm_copy_remaining_forward):
 addl %edx, %ecx
 subl %edi, %ecx
/* We copied all up till %edi position in the dst.
 In %ecx now is how many bytes are left to copy.
Now we need to advance %esi. */

 leal (%edi, %eax), %esi

L(mm_remaining_0_64_bytes_forward):
 cmp $32, %ecx
 ja L(mm_remaining_33_64_bytes_forward)
 cmp $16, %ecx
 ja L(mm_remaining_17_32_bytes_forward)
 testl %ecx, %ecx
 .p2align 4,,2
 je L(mm_return_pop_all)

 cmpb $8, %cl
 ja L(mm_remaining_9_16_bytes_forward)
 cmpb $4, %cl
 .p2align 4,,5
 ja L(mm_remaining_5_8_bytes_forward)
 cmpb $2, %cl
 .p2align 4,,1
 ja L(mm_remaining_3_4_bytes_forward)
 movzbl -1(%esi,%ecx), %eax
 movzbl (%esi), %ebx
 movb %al, -1(%edi,%ecx)
 movb %bl, (%edi)
 jmp L(mm_return_pop_all)

L(mm_remaining_33_64_bytes_forward):
 movdqu (%esi), %xmm0
 movdqu 16(%esi), %xmm1
 movdqu -32(%esi, %ecx), %xmm2
 movdqu -16(%esi, %ecx), %xmm3
 movdqu %xmm0, (%edi)
 movdqu %xmm1, 16(%edi)
 movdqu %xmm2, -32(%edi, %ecx)
 movdqu %xmm3, -16(%edi, %ecx)
 jmp L(mm_return_pop_all)

L(mm_remaining_17_32_bytes_forward):
 movdqu (%esi), %xmm0
 movdqu -16(%esi, %ecx), %xmm1
 movdqu %xmm0, (%edi)
 movdqu %xmm1, -16(%edi, %ecx)
 jmp L(mm_return_pop_all)

L(mm_remaining_9_16_bytes_forward):
 movq (%esi), %xmm0
 movq -8(%esi, %ecx), %xmm1
 movq %xmm0, (%edi)
 movq %xmm1, -8(%edi, %ecx)
 jmp L(mm_return_pop_all)

L(mm_remaining_5_8_bytes_forward):
 movl (%esi), %eax
 movl -4(%esi,%ecx), %ebx
 movl %eax, (%edi)
 movl %ebx, -4(%edi,%ecx)
 jmp L(mm_return_pop_all)

L(mm_remaining_3_4_bytes_forward):
 movzwl -2(%esi,%ecx), %eax
 movzwl (%esi), %ebx
 movw %ax, -2(%edi,%ecx)
 movw %bx, (%edi)
 jmp L(mm_return_pop_all)

L(mm_len_0_16_bytes_forward):
 testb $24, %cl
 jne L(mm_len_9_16_bytes_forward)
 testb $4, %cl
 .p2align 4,,5
 jne L(mm_len_5_8_bytes_forward)
 testl %ecx, %ecx
 .p2align 4,,2
 je L(mm_return)
 testb $2, %cl
 .p2align 4,,1
 jne L(mm_len_2_4_bytes_forward)
 movzbl -1(%eax,%ecx), %ebx
 movzbl (%eax), %eax
 movb %bl, -1(%edx,%ecx)
 movb %al, (%edx)
 jmp L(mm_return)

L(mm_len_2_4_bytes_forward):
 movzwl -2(%eax,%ecx), %ebx
 movzwl (%eax), %eax
 movw %bx, -2(%edx,%ecx)
 movw %ax, (%edx)
 jmp L(mm_return)

L(mm_len_5_8_bytes_forward):
 movl (%eax), %ebx
 movl -4(%eax,%ecx), %eax
 movl %ebx, (%edx)
 movl %eax, -4(%edx,%ecx)
 jmp L(mm_return)

L(mm_len_9_16_bytes_forward):
 movq (%eax), %xmm0
 movq -8(%eax, %ecx), %xmm1
 movq %xmm0, (%edx)
 movq %xmm1, -8(%edx, %ecx)
 jmp L(mm_return)

 CFI_POP (%edi)
 CFI_POP (%esi)

L(mm_recalc_len):
/* Compute in %ecx how many bytes are left to copy after
the main loop stops.  */

 movl %ebx, %ecx
 subl %edx, %ecx
/* The code for copying backwards.  */
L(mm_len_0_or_more_backward):

/* Now do checks for lengths. We do [0..16], [16..32], [32..64], [64..128]
separately.  */

 cmp $16, %ecx
 jbe L(mm_len_0_16_bytes_backward)

 cmpl $32, %ecx
 jg L(mm_len_32_or_more_backward)

/* Copy [0..32] and return.  */
 movdqu (%eax), %xmm0
 movdqu -16(%eax, %ecx), %xmm1
 movdqu %xmm0, (%edx)
 movdqu %xmm1, -16(%edx, %ecx)
 jmp L(mm_return)

L(mm_len_32_or_more_backward):
 cmpl $64, %ecx
 jg L(mm_len_64_or_more_backward)

/* Copy [0..64] and return.  */
 movdqu (%eax), %xmm0
 movdqu 16(%eax), %xmm1
 movdqu -16(%eax, %ecx), %xmm2
 movdqu -32(%eax, %ecx), %xmm3
 movdqu %xmm0, (%edx)
 movdqu %xmm1, 16(%edx)
 movdqu %xmm2, -16(%edx, %ecx)
 movdqu %xmm3, -32(%edx, %ecx)
 jmp L(mm_return)

L(mm_len_64_or_more_backward):
 cmpl $128, %ecx
 jg L(mm_len_128_or_more_backward)

/* Copy [0..128] and return.  */
 movdqu (%eax), %xmm0
 movdqu 16(%eax), %xmm1
 movdqu 32(%eax), %xmm2
 movdqu 48(%eax), %xmm3
 movdqu -64(%eax, %ecx), %xmm4
 movdqu -48(%eax, %ecx), %xmm5
 movdqu -32(%eax, %ecx), %xmm6
 movdqu -16(%eax, %ecx), %xmm7
 movdqu %xmm0, (%edx)
 movdqu %xmm1, 16(%edx)
 movdqu %xmm2, 32(%edx)
 movdqu %xmm3, 48(%edx)
 movdqu %xmm4, -64(%edx, %ecx)
 movdqu %xmm5, -48(%edx, %ecx)
 movdqu %xmm6, -32(%edx, %ecx)
 movdqu %xmm7, -16(%edx, %ecx)
 jmp L(mm_return)

L(mm_len_128_or_more_backward):
 PUSH (%esi)
 PUSH (%edi)

/* Aligning the address of destination. We need to save
16 bits from the source in order not to overwrite them.  */

 movdqu -16(%eax, %ecx), %xmm0
 movdqu -32(%eax, %ecx), %xmm1
 movdqu -48(%eax, %ecx), %xmm2
 movdqu -64(%eax, %ecx), %xmm3

 leal (%edx, %ecx), %edi
 andl $-64, %edi

 movl %eax, %esi
 subl %edx, %esi

 movdqu -16(%edi, %esi), %xmm4
 movdqu -32(%edi, %esi), %xmm5
 movdqu -48(%edi, %esi), %xmm6
 movdqu -64(%edi, %esi), %xmm7

 movdqu %xmm0, -16(%edx, %ecx)
 movdqu %xmm1, -32(%edx, %ecx)
 movdqu %xmm2, -48(%edx, %ecx)
 movdqu %xmm3, -64(%edx, %ecx)
 movdqa %xmm4, -16(%edi)
 movdqa %xmm5, -32(%edi)
 movdqa %xmm6, -48(%edi)
 movdqa %xmm7, -64(%edi)
 leal -64(%edi), %edi

 leal 64(%edx), %ebx
 andl $-64, %ebx

 cmp %edi, %ebx
 jae L(mm_main_loop_backward_end)

 PUSH(%ebx)
 SETUP_PIC_REG(bx)
 add $_GLOBAL_OFFSET_TABLE_, %ebx
 cmp __x86_shared_cache_size_half@GOTOFF(%ebx), %ecx
 /* Restore ebx. We can place a pop before jump as it doesn't affect any flags. */
 POP(%ebx)

 jae L(mm_large_page_loop_backward)

 .p2align 4
L(mm_main_loop_backward):

 prefetcht0 -128(%edi, %esi)

 movdqu -64(%edi, %esi), %xmm0
 movdqu -48(%edi, %esi), %xmm1
 movdqu -32(%edi, %esi), %xmm2
 movdqu -16(%edi, %esi), %xmm3
 movdqa %xmm0, -64(%edi)
 movdqa %xmm1, -48(%edi)
 movdqa %xmm2, -32(%edi)
 movdqa %xmm3, -16(%edi)
 leal -64(%edi), %edi
 cmp %edi, %ebx
 jb L(mm_main_loop_backward)
L(mm_main_loop_backward_end):
 POP (%edi)
 POP (%esi)
 jmp L(mm_recalc_len)

/* Copy [0..16] and return.  */
L(mm_len_0_16_bytes_backward):
 testb $24, %cl
 jnz L(mm_len_9_16_bytes_backward)
 testb $4, %cl
 .p2align 4,,5
 jnz L(mm_len_5_8_bytes_backward)
 testl %ecx, %ecx
 .p2align 4,,2
 je L(mm_return)
 testb $2, %cl
 .p2align 4,,1
 jne L(mm_len_3_4_bytes_backward)
 movzbl -1(%eax,%ecx), %ebx
 movzbl (%eax), %eax
 movb %bl, -1(%edx,%ecx)
 movb %al, (%edx)
 jmp L(mm_return)

L(mm_len_3_4_bytes_backward):
 movzwl -2(%eax,%ecx), %ebx
 movzwl (%eax), %eax
 movw %bx, -2(%edx,%ecx)
 movw %ax, (%edx)
 jmp L(mm_return)

L(mm_len_9_16_bytes_backward):
 PUSH (%esi)
 movl -4(%eax,%ecx), %ebx
 movl -8(%eax,%ecx), %esi
 movl %ebx, -4(%edx,%ecx)
 movl %esi, -8(%edx,%ecx)
 subl $8, %ecx
 POP (%esi)
 jmp L(mm_len_0_16_bytes_backward)

L(mm_len_5_8_bytes_backward):
 movl (%eax), %ebx
 movl -4(%eax,%ecx), %eax
 movl %ebx, (%edx)
 movl %eax, -4(%edx,%ecx)

L(mm_return):
 movl %edx, %eax
 RETURN

L(mm_return_pop_all):
 movl %edx, %eax
 POP (%edi)
 POP (%esi)
 RETURN

/* Big length copy forward part.  */

 .p2align 4
L(mm_large_page_loop_forward):
 movdqu (%eax, %edi), %xmm0
 movdqu 16(%eax, %edi), %xmm1
 movdqu 32(%eax, %edi), %xmm2
 movdqu 48(%eax, %edi), %xmm3
 movntdq %xmm0, (%edi)
 movntdq %xmm1, 16(%edi)
 movntdq %xmm2, 32(%edi)
 movntdq %xmm3, 48(%edi)
 leal 64(%edi), %edi
 cmp %edi, %ebx
 ja L(mm_large_page_loop_forward)
 sfence
 jmp L(mm_copy_remaining_forward)

/* Big length copy backward part.  */
 .p2align 4
L(mm_large_page_loop_backward):
 movdqu -64(%edi, %esi), %xmm0
 movdqu -48(%edi, %esi), %xmm1
 movdqu -32(%edi, %esi), %xmm2
 movdqu -16(%edi, %esi), %xmm3
 movntdq %xmm0, -64(%edi)
 movntdq %xmm1, -48(%edi)
 movntdq %xmm2, -32(%edi)
 movntdq %xmm3, -16(%edi)
 leal -64(%edi), %edi
 cmp %edi, %ebx
 jb L(mm_large_page_loop_backward)
 sfence
 POP (%edi)
 POP (%esi)
 jmp L(mm_recalc_len)

END (MEMMOVE)

// N.B., `private/bionic_asm.h` provides ALIAS_SYMBOL, but that file provides
// conflicting definitions for some macros in this file. Since ALIAS_SYMBOL is
// small, inline it here.
.globl memcpy;
.equ memcpy, MEMMOVE

Messung V0.5 in Prozent
C=98 H=89 G=93

¤ Dauer der Verarbeitung: 0.11 Sekunden  (vorverarbeitet am  2026-06-28) ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

PVS Prover

Isabelle Prover

NIST Cobol Testsuite

Cephes Mathematical Library

Vienna Development Method

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.