Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Firefox/dom/media/encoder/   (Browser von der Mozilla Stiftung Version 136.0.1©)  Datei vom 10.2.2025 mit Größe 16 kB image not shown  

Quelle  OpusTrackEncoder.cpp   Sprache: C

 
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-*/
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this file,
 * You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "OpusTrackEncoder.h"
#include "nsString.h"
#include "mozilla/CheckedInt.h"
#include "mozilla/ProfilerLabels.h"
#include "VideoUtils.h"

#include <opus/opus.h>

#define LOG(args, ...)

namespace mozilla {

// The Opus format supports up to 8 channels, and supports multitrack audio up
// to 255 channels, but the current implementation supports only mono and
// stereo, and downmixes any more than that.
constexpr int MAX_SUPPORTED_AUDIO_CHANNELS = 8;

// http://www.opus-codec.org/docs/html_api-1.0.2/group__opus__encoder.html
// In section "opus_encoder_init", channels must be 1 or 2 of input signal.
constexpr int MAX_CHANNELS = 2;

// A maximum data bytes for Opus to encode.
constexpr int MAX_DATA_BYTES = 4096;

// http://tools.ietf.org/html/draft-ietf-codec-oggopus-00#section-4
// Second paragraph, " The granule position of an audio data page is in units
// of PCM audio samples at a fixed rate of 48 kHz."
constexpr int kOpusSamplingRate = 48000;

// The duration of an Opus frame, and it must be 2.5, 5, 10, 20, 40 or 60 ms.
constexpr int kFrameDurationMs = 20;

// The supported sampling rate of input signal (Hz),
// must be one of the following. Will resampled to 48kHz otherwise.
constexpr int kOpusSupportedInputSamplingRates[] = {8000, 12000, 16000, 24000,
                                                    48000};

namespace {

// An endian-neutral serialization of integers. Serializing T in little endian
// format to aOutput, where T is a 16 bits or 32 bits integer.
template <typename T>
static void SerializeToBuffer(T aValue, nsTArray<uint8_t>* aOutput) {
  for (uint32_t i = 0; i < sizeof(T); i++) {
    aOutput->AppendElement((uint8_t)(0x000000ff & (aValue >> (i * 8))));
  }
}

static inline void SerializeToBuffer(const nsCString& aComment,
                                     nsTArray<uint8_t>* aOutput) {
  // Format of serializing a string to buffer is, the length of string (32 bits,
  // little endian), and the string.
  SerializeToBuffer((uint32_t)(aComment.Length()), aOutput);
  aOutput->AppendElements(aComment.get(), aComment.Length());
}

static void SerializeOpusIdHeader(uint8_t aChannelCount, uint16_t aPreskip,
                                  uint32_t aInputSampleRate,
                                  nsTArray<uint8_t>* aOutput) {
  // The magic signature, null terminator has to be stripped off from strings.
  constexpr uint8_t magic[] = "OpusHead";
  aOutput->AppendElements(magic, sizeof(magic) - 1);

  // The version must always be 1 (8 bits, unsigned).
  aOutput->AppendElement(1);

  // Number of output channels (8 bits, unsigned).
  aOutput->AppendElement(aChannelCount);

  // Number of samples (at 48 kHz) to discard from the decoder output when
  // starting playback (16 bits, unsigned, little endian).
  SerializeToBuffer(aPreskip, aOutput);

  // The sampling rate of input source (32 bits, unsigned, little endian).
  SerializeToBuffer(aInputSampleRate, aOutput);

  // Output gain, an encoder should set this field to zero (16 bits, signed,
  // little endian).
  SerializeToBuffer((int16_t)0, aOutput);

  // Channel mapping family. Family 0 allows only 1 or 2 channels (8 bits,
  // unsigned).
  aOutput->AppendElement(0);
}

static void SerializeOpusCommentHeader(const nsCString& aVendor,
                                       const nsTArray<nsCString>& aComments,
                                       nsTArray<uint8_t>* aOutput) {
  // The magic signature, null terminator has to be stripped off.
  constexpr uint8_t magic[] = "OpusTags";
  aOutput->AppendElements(magic, sizeof(magic) - 1);

  // The vendor; Should append in the following order:
  // vendor string length (32 bits, unsigned, little endian)
  // vendor string.
  SerializeToBuffer(aVendor, aOutput);

  // Add comments; Should append in the following order:
  // comment list length (32 bits, unsigned, little endian)
  // comment #0 string length (32 bits, unsigned, little endian)
  // comment #0 string
  // comment #1 string length (32 bits, unsigned, little endian)
  // comment #1 string ...
  SerializeToBuffer((uint32_t)aComments.Length(), aOutput);
  for (uint32_t i = 0; i < aComments.Length(); ++i) {
    SerializeToBuffer(aComments[i], aOutput);
  }
}

bool IsSampleRateSupported(TrackRate aSampleRate) {
  // According to www.opus-codec.org, creating an opus encoder requires the
  // sampling rate of source signal be one of 8000, 12000, 16000, 24000, or
  // 48000. If this constraint is not satisfied, we resample the input to 48kHz.
  AutoTArray<int, 5> supportedSamplingRates;
  supportedSamplingRates.AppendElements(
      kOpusSupportedInputSamplingRates,
      std::size(kOpusSupportedInputSamplingRates));
  return supportedSamplingRates.Contains(aSampleRate);
}

}  // Anonymous namespace.

OpusTrackEncoder::OpusTrackEncoder(TrackRate aTrackRate,
                                   MediaQueue<EncodedFrame>& aEncodedDataQueue)
    : AudioTrackEncoder(aTrackRate, aEncodedDataQueue),
      mOutputSampleRate(IsSampleRateSupported(aTrackRate) ? aTrackRate
                                                          : kOpusSamplingRate),
      mEncoder(nullptr),
      mLookahead(0),
      mLookaheadWritten(0),
      mResampler(nullptr),
      mNumOutputFrames(0) {}

OpusTrackEncoder::~OpusTrackEncoder() {
  if (mEncoder) {
    opus_encoder_destroy(mEncoder);
  }
  if (mResampler) {
    speex_resampler_destroy(mResampler);
    mResampler = nullptr;
  }
}

nsresult OpusTrackEncoder::Init(int aChannels) {
  NS_ENSURE_TRUE((aChannels <= MAX_SUPPORTED_AUDIO_CHANNELS) && (aChannels > 0),
                 NS_ERROR_FAILURE);

  // This version of encoder API only support 1 or 2 channels,
  // So set the mChannels less or equal 2 and
  // let InterleaveTrackData downmix pcm data.
  mChannels = aChannels > MAX_CHANNELS ? MAX_CHANNELS : aChannels;

  // Reject non-audio sample rates.
  NS_ENSURE_TRUE(mTrackRate >= 8000, NS_ERROR_INVALID_ARG);
  NS_ENSURE_TRUE(mTrackRate <= 192000, NS_ERROR_INVALID_ARG);

  if (NeedsResampler()) {
    int error;
    mResampler = speex_resampler_init(mChannels, mTrackRate, kOpusSamplingRate,
                                      SPEEX_RESAMPLER_QUALITY_DEFAULT, &error);

    if (error != RESAMPLER_ERR_SUCCESS) {
      return NS_ERROR_FAILURE;
    }
  }

  int error = 0;
  mEncoder = opus_encoder_create(mOutputSampleRate, mChannels,
                                 OPUS_APPLICATION_AUDIO, &error);

  if (error != OPUS_OK) {
    return NS_ERROR_FAILURE;
  }

  if (mAudioBitrate) {
    int bps = static_cast<int>(
        std::min<uint32_t>(mAudioBitrate, std::numeric_limits<int>::max()));
    error = opus_encoder_ctl(mEncoder, OPUS_SET_BITRATE(bps));
    if (error != OPUS_OK) {
      return NS_ERROR_FAILURE;
    }
  }

  // In the case of Opus we need to calculate the codec delay based on the
  // pre-skip. For more information see:
  // https://tools.ietf.org/html/rfc7845#section-4.2
  error = opus_encoder_ctl(mEncoder, OPUS_GET_LOOKAHEAD(&mLookahead));
  if (error != OPUS_OK) {
    mLookahead = 0;
    return NS_ERROR_FAILURE;
  }

  SetInitialized();

  return NS_OK;
}

int OpusTrackEncoder::GetLookahead() const {
  return mLookahead * kOpusSamplingRate / mOutputSampleRate;
}

int OpusTrackEncoder::NumInputFramesPerPacket() const {
  return mTrackRate * kFrameDurationMs / 1000;
}

int OpusTrackEncoder::NumOutputFramesPerPacket() const {
  return mOutputSampleRate * kFrameDurationMs / 1000;
}

bool OpusTrackEncoder::NeedsResampler() const {
  // A resampler is needed when mTrackRate is not supported by the opus encoder.
  // This is equivalent to !IsSampleRateSupported(mTrackRate) but less cycles.
  return mTrackRate != mOutputSampleRate &&
         mOutputSampleRate == kOpusSamplingRate;
}

already_AddRefed<TrackMetadataBase> OpusTrackEncoder::GetMetadata() {
  AUTO_PROFILER_LABEL("OpusTrackEncoder::GetMetadata", OTHER);

  MOZ_ASSERT(mInitialized);

  if (!mInitialized) {
    return nullptr;
  }

  RefPtr<OpusMetadata> meta = new OpusMetadata();
  meta->mChannels = mChannels;
  meta->mSamplingFrequency = mTrackRate;

  // Ogg and Webm timestamps are always sampled at 48k for Opus.
  SerializeOpusIdHeader(mChannels,
                        mLookahead * (kOpusSamplingRate / mOutputSampleRate),
                        mTrackRate, &meta->mIdHeader);

  nsCString vendor;
  vendor.AppendASCII(opus_get_version_string());

  nsTArray<nsCString> comments;
  comments.AppendElement(
      nsLiteralCString("ENCODER=Mozilla" MOZ_APP_UA_VERSION));

  SerializeOpusCommentHeader(vendor, comments, &meta->mCommentHeader);

  return meta.forget();
}

nsresult OpusTrackEncoder::Encode(AudioSegment* aSegment) {
  AUTO_PROFILER_LABEL("OpusTrackEncoder::Encode", OTHER);

  MOZ_ASSERT(aSegment);
  MOZ_ASSERT(mInitialized || mCanceled);

  if (mCanceled || IsEncodingComplete()) {
    return NS_ERROR_FAILURE;
  }

  if (!mInitialized) {
    // calculation below depends on the truth that mInitialized is true.
    return NS_ERROR_FAILURE;
  }

  int result = 0;
  // Loop until we run out of packets of input data
  while (result >= 0 && !IsEncodingComplete()) {
    // re-sampled frames left last time which didn't fit into an Opus packet
    // duration.
    const int framesLeft = mResampledLeftover.Length() / mChannels;
    MOZ_ASSERT(NumOutputFramesPerPacket() >= framesLeft);
    // Fetch input frames such that there will be n frames where (n +
    // framesLeft) >= NumOutputFramesPerPacket() after re-sampling.
    const int framesToFetch = NumInputFramesPerPacket() -
                              (framesLeft * mTrackRate / kOpusSamplingRate) +
                              (NeedsResampler() ? 1 : 0);

    if (!mEndOfStream && aSegment->GetDuration() < framesToFetch) {
      // Not enough raw data
      return NS_OK;
    }

    // Start encoding data.
    AutoTArray<AudioDataValue, 9600> pcm;
    pcm.SetLength(NumOutputFramesPerPacket() * mChannels);

    int frameCopied = 0;

    for (AudioSegment::ChunkIterator iter(*aSegment);
         !iter.IsEnded() && frameCopied < framesToFetch; iter.Next()) {
      AudioChunk chunk = *iter;

      // Chunk to the required frame size.
      TrackTime frameToCopy =
          std::min(chunk.GetDuration(),
                   static_cast<TrackTime>(framesToFetch - frameCopied));

      // Possible greatest value of framesToFetch = 3844: see
      // https://bugzilla.mozilla.org/show_bug.cgi?id=1349421#c8. frameToCopy
      // should not be able to exceed this value.
      MOZ_ASSERT(frameToCopy <= 3844, "frameToCopy exceeded expected range");

      if (!chunk.IsNull()) {
        // Append the interleaved data to the end of pcm buffer.
        AudioTrackEncoder::InterleaveTrackData(
            chunk, frameToCopy, mChannels,
            pcm.Elements() + frameCopied * mChannels);
      } else {
        CheckedInt<int> memsetLength =
            CheckedInt<int>(frameToCopy) * mChannels * sizeof(AudioDataValue);
        if (!memsetLength.isValid()) {
          // This should never happen, but we use a defensive check because
          // we really don't want a bad memset
          MOZ_ASSERT_UNREACHABLE("memsetLength invalid!");
          return NS_ERROR_FAILURE;
        }
        memset(pcm.Elements() + frameCopied * mChannels, 0,
               memsetLength.value());
      }

      frameCopied += frameToCopy;
    }

    // Possible greatest value of framesToFetch = 3844: see
    // https://bugzilla.mozilla.org/show_bug.cgi?id=1349421#c8. frameCopied
    // should not be able to exceed this value.
    MOZ_ASSERT(frameCopied <= 3844, "frameCopied exceeded expected range");

    int framesInPCM = frameCopied;
    if (mResampler) {
      AutoTArray<AudioDataValue, 9600> resamplingDest;
      uint32_t inframes = frameCopied;
      uint32_t outframes = inframes * kOpusSamplingRate / mTrackRate + 1;

      // We want to consume all the input data, so we slightly oversize the
      // resampled data buffer so we can fit the output data in. We cannot
      // really predict the output frame count at each call.
      resamplingDest.SetLength(outframes * mChannels);

      float* in = reinterpret_cast<float*>(pcm.Elements());
      float* out = reinterpret_cast<float*>(resamplingDest.Elements());
      speex_resampler_process_interleaved_float(mResampler, in, &inframes, out,
                                                &outframes);

      MOZ_ASSERT(pcm.Length() >= mResampledLeftover.Length());
      PodCopy(pcm.Elements(), mResampledLeftover.Elements(),
              mResampledLeftover.Length());

      uint32_t outframesToCopy = std::min(
          outframes,
          static_cast<uint32_t>(NumOutputFramesPerPacket() - framesLeft));

      MOZ_ASSERT(pcm.Length() - mResampledLeftover.Length() >=
                 outframesToCopy * mChannels);
      PodCopy(pcm.Elements() + mResampledLeftover.Length(),
              resamplingDest.Elements(), outframesToCopy * mChannels);
      int frameLeftover = outframes - outframesToCopy;
      mResampledLeftover.SetLength(frameLeftover * mChannels);
      PodCopy(mResampledLeftover.Elements(),
              resamplingDest.Elements() + outframesToCopy * mChannels,
              mResampledLeftover.Length());
      // This is always at 48000Hz.
      framesInPCM = framesLeft + outframesToCopy;
    }

    // Remove the raw data which has been pulled to pcm buffer.
    // The value of frameCopied should be equal to (or smaller than, if eos)
    // NumOutputFramesPerPacket().
    aSegment->RemoveLeading(frameCopied);

    // Has reached the end of input stream and all queued data has pulled for
    // encoding.
    bool isFinalPacket = false;
    if (aSegment->GetDuration() == 0 && mEndOfStream &&
        framesInPCM < NumOutputFramesPerPacket()) {
      // Pad |mLookahead| samples to the end of the track to prevent loss of
      // original data.
      const int toWrite = std::min(mLookahead - mLookaheadWritten,
                                   NumOutputFramesPerPacket() - framesInPCM);
      PodZero(pcm.Elements() + framesInPCM * mChannels, toWrite * mChannels);
      mLookaheadWritten += toWrite;
      framesInPCM += toWrite;
      if (mLookaheadWritten == mLookahead) {
        isFinalPacket = true;
      }
    }

    MOZ_ASSERT_IF(!isFinalPacket, framesInPCM == NumOutputFramesPerPacket());

    // Append null data to pcm buffer if the leftover data is not enough for
    // opus encoder.
    if (framesInPCM < NumOutputFramesPerPacket() && isFinalPacket) {
      PodZero(pcm.Elements() + framesInPCM * mChannels,
              (NumOutputFramesPerPacket() - framesInPCM) * mChannels);
    }
    auto frameData = MakeRefPtr<EncodedFrame::FrameData>();
    // Encode the data with Opus Encoder.
    frameData->SetLength(MAX_DATA_BYTES);
    // result is returned as opus error code if it is negative.
    result = 0;
    const float* pcmBuf = static_cast<float*>(pcm.Elements());
    result = opus_encode_float(mEncoder, pcmBuf, NumOutputFramesPerPacket(),
                               frameData->Elements(), MAX_DATA_BYTES);
    frameData->SetLength(result >= 0 ? result : 0);

    if (result < 0) {
      LOG("[Opus] Fail to encode data! Result: %s.", opus_strerror(result));
    }
    if (isFinalPacket) {
      if (mResampler) {
        speex_resampler_destroy(mResampler);
        mResampler = nullptr;
      }
      mResampledLeftover.SetLength(0);
    }

    // timestamp should be the time of the first sample
    mEncodedDataQueue.Push(MakeAndAddRef<EncodedFrame>(
        media::TimeUnit(mNumOutputFrames + mLookahead, mOutputSampleRate),
        static_cast<uint64_t>(framesInPCM) * kOpusSamplingRate /
            mOutputSampleRate,
        kOpusSamplingRate, EncodedFrame::OPUS_AUDIO_FRAME,
        std::move(frameData)));

    mNumOutputFrames += NumOutputFramesPerPacket();
    LOG("[Opus] mOutputTimeStamp %.3f.",
        media::TimeUnit(mNumOutputFrames, mOutputSampleRate).ToSeconds());

    if (isFinalPacket) {
      LOG("[Opus] Done encoding.");
      mEncodedDataQueue.Finish();
    }
  }

  return result >= 0 ? NS_OK : NS_ERROR_FAILURE;
}

}  // namespace mozilla

#undef LOG

Messung V0.5
C=90 H=99 G=94

¤ Dauer der Verarbeitung: 0.15 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.