Quelle  cdr023.cob   Sprache: unbekannt

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  CDR023.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.


      * Standard COBOL (file "CDR023.SCO") calling SQL
      * procedures in file "CDR023.MCO"  

      ****************************************************************
      *                                                              
      *                 COMMENT SECTION                              
      *                                                              
      * DATE 1989/04/07 STANDARD COBOL LANGUAGE                          
      * NIST SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:                                                  
      *  This program was written by employees of NIST to test SQL    
      *  implementations for conformance to the SQL standards.        
      *  NIST assumes no responsibility for any party's use of        
      *  this program.
      *                                                              
      * CDR023.SCO                                                    
      * WRITTEN BY: SUN DAJUN                                        
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *                                                              
      *   THIS ROUTINE TESTS THE REFERENTIAL INTEGRITY CONSTRAINT FOR
      * SQL.                                                         
      *                                                              
      * REFERENCES                                                   
      *       AMERICAN NATIONAL STANDARD database language - SQL     
      *                          with Integrity Enhancement          
      *                                                              
      *            SECTION 6.7 <referential constraint definition>   
      *               <referential constraint definition>::=         
      *                     FOREIGN KEY (<referencing columns>)      
      *                     <references specification>               
      *               <references specification>::=                  
      *                     REFERENCES <referenced table and columns>
      *               <referencing columns>::=                       
      *                       <reference column list>                
      *               <refereced table and columns>::=               
      *                       <table name>((<reference column list>  
      *               <reference column list>::=                     
      *                       <column name>({,<column name>}...)     
      *                                                              
      ****************************************************************





      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  count2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  SQLCODE PIC S9(9) COMP.
       01  errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
      * EXEC SQL END DECLARE SECTION END-EXEC


       01  code1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  code2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  uid PIC  X(18).
       01  uidx PIC X(18).

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

      * date_time declaration *
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
    
       PROCEDURE DIVISION.
       P0.


           MOVE "SCHANZLE" TO uid
           CALL "AUTHID" USING uid
           MOVE "not logged in, not" TO uidx
           CALL "AUTHCK" USING SQLCODE uidx
           MOVE SQLCODE TO SQL-COD
           if (uid NOT = uidx) then
            DISPLAY "ERROR: User " uid " expected."
            DISPLAY "User " uidx " connected."
            DISPLAY " "
            STOP RUN
           END-IF

           MOVE 0 TO errcnt
           DISPLAY
           "SQL Test Suite, V6.0, Module COBOL, cdr023.sco"
           DISPLAY " "
           DISPLAY
           "59-byte ID"
           DISPLAY "TEd Version #"
           DISPLAY " "
      * date_time print *
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
      ******************** BEGIN TEST0382 *******************

      *This test  inserts  rows  in FOREIGN KEY            
      *TABLE -- ACR_SCH_F,  check references across        
      *schemas.                                           

           DISPLAY " TEST0382 "
           DISPLAY " PRIMARY KEY & FOREIGN KEY "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.6,6.7,6.10"
           DISPLAY " GRANT with GRANT OPTION"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY " INSERT INTO ACR_SCH_F"
           DISPLAY " VALUES(1,'DOG');"
           DISPLAY  " "
           DISPLAY " SELECT COUNT(*) INTO :count1 FROM
      -    " ACR_SCH_F;"
           DISPLAY  " "
           DISPLAY " INSERT INTO ACR_SCH_F"
           DISPLAY " VALUES(2,'PIG');"
           DISPLAY  " "
           DISPLAY " SELECT COUNT(*) INTO :count2 FROM
      -    " ACR_SCH_F;"
           DISPLAY  " "
           COMPUTE count1 = -1
           COMPUTE count2 = -1
      * EXEC SQL INSERT INTO ACR_SCH_F
      *  VALUES(1,'DOG') END-EXEC
           CALL "SUB1" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
      * EXEC SQL SELECT COUNT(*) INTO :count1 FROM ACR_SCH_F;
           CALL "SUB2" USING SQLCODE count1
           MOVE SQLCODE TO SQL-COD

      * EXEC SQL INSERT INTO ACR_SCH_F
      *  VALUES(2,'PIG') END-EXEC
           CALL "SUB3" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code2
      * EXEC SQL SELECT COUNT(*) INTO :count2 FROM ACR_SCH_F;
           CALL "SUB4" USING SQLCODE count2
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL ROLLBACK WORK;
           CALL "SUB5" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct answer is :"
           DISPLAY " code1 = 0."
           DISPLAY " code2 < 0."
           DISPLAY " count1 is 1"
           DISPLAY " count2 is 1"
           DISPLAY " Your answer is :"
           DISPLAY " code1 = ", code1
           DISPLAY " code2 = ", code2
           DISPLAY " count1 is ", count1
           DISPLAY " count2 is ", count2
           if (code1  =  0  AND  count1  =  1  AND  code2  <  0  AND 
             count2  =  1) then
      *  EXEC SQL INSERT INTO SUN.TESTREPORT
      *    VALUES('0382','pass','MCO') END-EXEC
             CALL "SUB6" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
      *  EXEC SQL INSERT INTO SUN.TESTREPORT
      *    VALUES('0382','fail','MCO') END-EXEC
             ADD 1 TO errcnt
             CALL "SUB7" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr023.sco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
      * EXEC SQL COMMIT WORK;
           CALL "SUB8" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      ************************ END TEST0382 ************************



      ******************** BEGIN TEST0383 *******************

      *This test  inserts  rows  in FOREIGN KEY            
      *TABLE -- TAB5,  test privilege violation.          

           DISPLAY " TEST0383 "
           DISPLAY " PRIMARY KEY & FOREIGN KEY "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.6,6.7,6.10"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY " GRANT without GRANT OPTION"
           DISPLAY " INSERT INTO TAB5"
           DISPLAY " VALUES('E1','DOG');"
           DISPLAY  " "
           DISPLAY " SELECT COUNT(*) INTO :count1 FROM TAB5;"
           DISPLAY  " "
           DISPLAY " INSERT INTO TAB5"
           DISPLAY " VALUES('E9','PIG');"
           DISPLAY  " "
           DISPLAY " SELECT COUNT(*) INTO :count2 FROM TAB5;"
           DISPLAY  " "
           COMPUTE count1 = -1
           COMPUTE count2 = -1
      * EXEC SQL INSERT INTO TAB5
      *  VALUES('E1','DOG') END-EXEC
           CALL "SUB9" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
      * EXEC SQL SELECT COUNT(*) INTO :count1 FROM TAB5;
           CALL "SUB10" USING SQLCODE count1
           MOVE SQLCODE TO SQL-COD

      * EXEC SQL INSERT INTO TAB5
      *  VALUES('E9','PIG') END-EXEC
           CALL "SUB11" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code2
      * EXEC SQL SELECT COUNT(*) INTO :count2 FROM TAB5;
           CALL "SUB12" USING SQLCODE count2
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL ROLLBACK WORK;
           CALL "SUB13" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct answer is :"
           DISPLAY " code1 < 0."
           DISPLAY " and code2 < 0."
           DISPLAY " or count2 is 2"
           DISPLAY " Your answer is :"
           DISPLAY " code1 = ", code1
           DISPLAY " and code2 = ", code2
           DISPLAY " count2 is ", count2 " "
           if (count2 = 2 OR code1 < 0 AND code2 < 0)
      *  EXEC SQL INSERT INTO SUN.TESTREPORT
      *    VALUES('0383','pass','MCO') END-EXEC
             CALL "SUB14" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
      *  EXEC SQL INSERT INTO SUN.TESTREPORT
      *    VALUES('0383','fail','MCO') END-EXEC
             ADD 1 TO errcnt
             CALL "SUB15" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr023.sco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
      * EXEC SQL COMMIT WORK;
           CALL "SUB16" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      ************************ END TEST0383 ************************



      ******************** BEGIN TEST0384 ******************

      *This test  inserts  rows  in FOREIGN KEY            
      *TABLE -- TAB6,  test privilege violation.          

           DISPLAY " TEST0384 "
           DISPLAY " PRIMARY KEY & FOREIGN KEY "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.6,6.7,6.10"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY " GRANT SELECT but not REFERENCE "
           DISPLAY " INSERT INTO TAB6"
           DISPLAY " VALUES(1,'DOG');"
           DISPLAY  " "
           DISPLAY " SELECT COUNT(*) INTO :count1 FROM TAB6;"
           DISPLAY  " "
           DISPLAY " INSERT INTO TAB6"
           DISPLAY " VALUES(2,'PIG');"
           DISPLAY  " "
           DISPLAY " SELECT COUNT(*) INTO :count2 FROM TAB6;"
           DISPLAY  " "
           COMPUTE count1 = -1
           COMPUTE count2 = -1
      * EXEC SQL INSERT INTO TAB6
      *  VALUES(1,'DOG') END-EXEC
           CALL "SUB17" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
      * EXEC SQL SELECT COUNT(*) INTO :count1 FROM TAB6;
           CALL "SUB18" USING SQLCODE count1
           MOVE SQLCODE TO SQL-COD

      * EXEC SQL INSERT INTO TAB6
      *  VALUES(2,'PIG') END-EXEC
           CALL "SUB19" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code2
      * EXEC SQL SELECT COUNT(*) INTO :count2 FROM TAB6;
           CALL "SUB20" USING SQLCODE count2
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL ROLLBACK WORK;
           CALL "SUB21" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct answer is :"
           DISPLAY " code1 < 0."
           DISPLAY " and code2 < 0."
           DISPLAY " or count2 is 2"
           DISPLAY " Your answer is :"
           DISPLAY " code1 = ", code1
           DISPLAY " and code2 = ", code2
           DISPLAY " count2 is ", count2
           if (count2 = 2 OR code1 < 0 AND code2 < 0)
      *  EXEC SQL INSERT INTO SUN.TESTREPORT
      *    VALUES('0384','pass','MCO') END-EXEC
             CALL "SUB22" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
      *  EXEC SQL INSERT INTO SUN.TESTREPORT
      *    VALUES('0384','fail','MCO') END-EXEC
             ADD 1 TO errcnt
             CALL "SUB23" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr023.sco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
      * EXEC SQL COMMIT WORK;
           CALL "SUB24" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      ************************ END TEST0384 ************************






      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements