Quellcode-Bibliothek act8945a.txt   Sprache: Text

Device-Tree bindings for Active-semi ACT8945A MFD driver

Required properties:
 - compatible: "active-semi,act8945a".
 - reg: the I2C slave address for the ACT8945A chip

The chip exposes two subdevices:
 - a regulators: see ../regulator/act8945a-regulator.txt
 - a charger: see ../power/act8945a-charger.txt

Example:
 pmic@5b {
  compatible = "active-semi,act8945a";
  reg = <0x5b>;

  active-semi,vsel-high;

  regulators {
   vdd_1v35_reg: REG_DCDC1 {
    regulator-name = "VDD_1V35";
    regulator-min-microvolt = <1350000>;
    regulator-max-microvolt = <1350000>;
    regulator-always-on;
   };

   vdd_1v2_reg: REG_DCDC2 {
    regulator-name = "VDD_1V2";
    regulator-min-microvolt = <1100000>;
    regulator-max-microvolt = <1300000>;
    regulator-always-on;
   };

   vdd_3v3_reg: REG_DCDC3 {
    regulator-name = "VDD_3V3";
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;
    regulator-always-on;
   };

   vdd_fuse_reg: REG_LDO1 {
    regulator-name = "VDD_FUSE";
    regulator-min-microvolt = <2500000>;
    regulator-max-microvolt = <2500000>;
    regulator-always-on;
   };

   vdd_3v3_lp_reg: REG_LDO2 {
    regulator-name = "VDD_3V3_LP";
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;
    regulator-always-on;
   };

   vdd_led_reg: REG_LDO3 {
    regulator-name = "VDD_LED";
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;
    regulator-always-on;
   };

   vdd_sdhc_1v8_reg: REG_LDO4 {
    regulator-name = "VDD_SDHC_1V8";
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;
    regulator-always-on;
   };
  };

  charger {
   compatible = "active-semi,act8945a-charger";
   pinctrl-names = "default";
   pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
   interrupt-parent = <&pioA>;
   interrupts = <45 IRQ_TYPE_LEVEL_LOW>;

   active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
   active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
   active-semi,input-voltage-threshold-microvolt = <6600>;
   active-semi,precondition-timeout = <40>;
   active-semi,total-timeout = <3>;
  };
 };