Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/LibreOffice/basic/source/comp/   (Office von Apache Version 25.8.3.2©)  Datei vom 5.10.2025 mit Größe 32 kB image not shown  

Quelle  exprtree.cxx   Sprache: C

 
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */



#include <memory>
#include <parser.hxx>
#include <basic/sberrors.hxx>
#include <basic/sbmod.hxx>
#include <comphelper/SetFlagContextHelper.hxx>
#include <expr.hxx>

SbiExpression::SbiExpression( SbiParser* p, SbiExprType t,
    SbiExprMode eMode, const KeywordSymbolInfo* pKeywordSymbolInfo ) :
    pParser(p),
    eCurExpr(t),
    m_eMode(eMode)
{
    pExpr = (t != SbSTDEXPR ) ? Term( pKeywordSymbolInfo ) : Boolean();
    if( t != SbSYMBOL )
    {
        pExpr->Optimize(pParser);
    }
    if( t == SbLVALUE && !pExpr->IsLvalue() )
    {
        p->Error( ERRCODE_BASIC_LVALUE_EXPECTED );
    }
    if( t == SbOPERAND && !IsVariable() )
    {
        p->Error( ERRCODE_BASIC_VAR_EXPECTED );
    }
}

SbiExpression::SbiExpression( SbiParser* p, double n, SbxDataType t ) :
    pParser(p),
    eCurExpr(SbOPERAND),
    m_eMode(EXPRMODE_STANDARD)
{
    pExpr = std::make_unique<SbiExprNode>( n, t );
    pExpr->Optimize(pParser);
}

SbiExpression::SbiExpression( SbiParser* p, const SbiSymDef& r, SbiExprListPtr pPar ) :
    pParser(p),
    eCurExpr(SbOPERAND),
    m_eMode(EXPRMODE_STANDARD)
{
    pExpr = std::make_unique<SbiExprNode>( r, SbxVARIANT, std::move(pPar) );
}

SbiExpression::~SbiExpression() { }

// reading in a complete identifier
// an identifier has the following form:
// name[(Parameter)][.Name[(parameter)]]...
// structure elements are coupled via the element pNext,
// so that they're not in the tree.

// Are there parameters without brackets following? This may be a number,
// a string, a symbol or also a comma (if the 1st parameter is missing)

static bool DoParametersFollow( const SbiParser* p, SbiExprType eCurExpr, SbiToken eTok )
{
    if( eTok == LPAREN )
    {
        return true;
    }
    // but only if similar to CALL!
    if( !p->WhiteSpace() || eCurExpr != SbSYMBOL )
    {
        return false;
    }
    if ( eTok == NUMBER || eTok == MINUS || eTok == FIXSTRING ||
         eTok == SYMBOL || eTok == COMMA  || eTok == DOT || eTok == NOT || eTok == BYVAL )
    {
        return true;
    }
    else // check for default params with reserved names ( e.g. names of tokens )
    {
        SbiTokenizer tokens( *static_cast<const SbiTokenizer*>(p) );
        // Urk the Next() / Peek() semantics are... weird
        tokens.Next();
        if ( tokens.Peek() == ASSIGN )
        {
            return true;
        }
    }
    return false;
}

// definition of a new symbol

static SbiSymDef* AddSym ( SbiToken eTok, SbiSymPool& rPool, SbiExprType eCurExpr,
                           const OUString& rName, SbxDataType eType, const SbiExprList* pPar )
{
    SbiSymDef* pDef;
    // A= is not a procedure
    bool bHasType = ( eTok == EQ || eTok == DOT );
    if( ( !bHasType && eCurExpr == SbSYMBOL ) || pPar )
    {
        // so this is a procedure
        // the correct pool should be found out, as
        // procs must always get into a public pool
        SbiSymPool* pPool = &rPool;
        if( pPool->GetScope() != SbPUBLIC )
        {
            pPool = &rPool.GetParser()->aPublics;
        }
        SbiProcDef* pProc = pPool->AddProc( rName );

        // special treatment for Colls like Documents(1)
        if( eCurExpr == SbSTDEXPR )
        {
            bHasType = true;
        }
        pDef = pProc;
        pDef->SetType( bHasType ? eType : SbxEMPTY );
        if( pPar )
        {
            // generate dummy parameters
            for( sal_Int32 n = 1; n <= pPar->GetSize(); n++ )
            {
                OUString aPar = "PAR" + OUString::number( n );
                pProc->GetParams().AddSym( aPar );
            }
        }
    }
    else
    {
        // or a normal symbol
        pDef = rPool.AddSym( rName );
        pDef->SetType( eType );
    }
    return pDef;
}

// currently even keywords are allowed (because of Dflt properties of the same name)

std::unique_ptr<SbiExprNode> SbiExpression::Term( const KeywordSymbolInfo* pKeywordSymbolInfo )
{
    if( pParser->Peek() == DOT )
    {
        SbiExprNode* pWithVar = pParser->GetWithVar();
        // #26608: get to the node-chain's end to pass the correct object
        SbiSymDef* pDef = pWithVar ? pWithVar->GetRealVar() : nullptr;
        std::unique_ptr<SbiExprNode> pNd;
        if( !pDef )
        {
            pParser->Next();
        }
        else
        {
            pNd = ObjTerm( *pDef );
            if( pNd )
            {
                pNd->SetWithParent( pWithVar );
            }
        }
        if( !pNd )
        {
            pParser->Error( ERRCODE_BASIC_UNEXPECTED, DOT );
            pNd = std::make_unique<SbiExprNode>( 1.0, SbxDOUBLE );
        }
        return pNd;
    }

    SbiToken eTok = (pKeywordSymbolInfo == nullptr) ? pParser->Next() : SYMBOL;
    // memorize the parsing's begin
    pParser->LockColumn();
    OUString aSym( (pKeywordSymbolInfo == nullptr) ? pParser->GetSym() : pKeywordSymbolInfo->m_aKeywordSymbol );
    SbxDataType eType = (pKeywordSymbolInfo == nullptr) ? pParser->GetType() : pKeywordSymbolInfo->m_eSbxDataType;
    SbiExprListPtr pPar;
    std::unique_ptr<SbiExprListVector> pvMoreParLcl;
    // are there parameters following?
    SbiToken eNextTok = pParser->Peek();
    // is it a known parameter?
    // create a string constant then, which will be recognized
    // in the SbiParameters-ctor and is continued to be handled
    if( eNextTok == ASSIGN )
    {
        pParser->UnlockColumn();
        return std::make_unique<SbiExprNode>( aSym );
    }
    // no keywords allowed from here on!
    if( SbiTokenizer::IsKwd( eTok )
        && (!pParser->IsCompatible() || eTok != INPUT) )
    {
        pParser->Error( ERRCODE_BASIC_SYNTAX );
        bError = true;
    }

    eTok = eNextTok;
    if( DoParametersFollow( pParser, eCurExpr, eTok ) )
    {
        bool bStandaloneExpression = (m_eMode == EXPRMODE_STANDALONE);
        pPar = SbiExprList::ParseParameters( pParser, bStandaloneExpression );
        bError = bError || !pPar->IsValid();
        if( !bError )
            bBracket = pPar->IsBracket();
        eTok = pParser->Peek();

        // i75443 check for additional sets of parameters
        while( eTok == LPAREN )
        {
            if( pvMoreParLcl == nullptr )
            {
                pvMoreParLcl.reset(new SbiExprListVector);
            }
            SbiExprListPtr pAddPar = SbiExprList::ParseParameters( pParser );
            bError = bError || !pAddPar->IsValid();
            pvMoreParLcl->push_back( std::move(pAddPar) );
            eTok = pParser->Peek();
        }
    }
    // It might be an object part, if . or ! is following.
    // In case of . the variable must already be defined;
    // it's an object, if pDef is NULL after the search.
    bool bObj = ( ( eTok == DOT || eTok == EXCLAM )
                    && !pParser->WhiteSpace() );
    if( bObj )
    {
        bBracket = false;   // Now the bracket for the first term is obsolete
        if( eType == SbxVARIANT )
        {
            eType = SbxOBJECT;
        }
        else
        {
            // Name%. really does not work!
            pParser->Error( ERRCODE_BASIC_BAD_DECLARATION, aSym );
            bError = true;
        }
    }
    // Search:
    SbiSymDef* pDef = pParser->pPool->Find( aSym );
    if( !pDef )
    {
        // Part of the Runtime-Library?
        // from 31.3.1996: swapped out to parser-method
        // (is also needed in SbiParser::DefVar() in DIM.CXX)
        pDef = pParser->CheckRTLForSym( aSym, eType );

        // #i109184: Check if symbol is or later will be defined inside module
        SbModule& rMod = pParser->aGen.GetModule();
        if( rMod.FindMethod( aSym, SbxClassType::DontCare ) )
        {
            pDef = nullptr;
        }
    }
    if( !pDef )
    {
        if( bObj )
        {
            eType = SbxOBJECT;
        }
        pDef = AddSym( eTok, *pParser->pPool, eCurExpr, aSym, eType, pPar.get() );
        // Looks like this is a local ( but undefined variable )
        // if it is in a static procedure then make this Symbol
        // static
        if ( !bObj && pParser->pProc && pParser->pProc->IsStatic() )
        {
            pDef->SetStatic();
        }
    }
    else
    {

        SbiConstDef* pConst = pDef->GetConstDef();
        if( pConst )
        {
            pPar = nullptr;
            pvMoreParLcl.reset();
            if( pConst->GetType() == SbxSTRING )
            {
                return std::make_unique<SbiExprNode>( pConst->GetString() );
            }
            else
            {
                return std::make_unique<SbiExprNode>( pConst->GetValue(), pConst->GetType() );
            }
        }

        // 0 parameters come up to ()
        if( pDef->GetDims() )
        {
            if( pPar && pPar->GetSize() && pPar->GetSize() != pDef->GetDims() )
            {
                pParser->Error( ERRCODE_BASIC_WRONG_DIMS );
            }
        }
        if( pDef->IsDefinedAs() )
        {
            SbxDataType eDefType = pDef->GetType();
            // #119187 Only error if types conflict
            if( eType >= SbxINTEGER && eType <= SbxSTRING && eType != eDefType )
            {
                // How? Define with AS first and take a Suffix then?
                pParser->Error( ERRCODE_BASIC_BAD_DECLARATION, aSym );
                bError = true;
            }
            else if ( eType == SbxVARIANT )
            {
                // if there's nothing named, take the type of the entry,
                // but only if the var hasn't been defined with AS XXX
                // so that we catch n% = 5 : print n
                eType = eDefType;
            }
        }
        // checking type of variables:
        // is there named anything different in the scanner?
        // That's OK for methods!
        if( eType != SbxVARIANT &&          // Variant takes everything
            eType != pDef->GetType() &&
            !pDef->GetProcDef() )
        {
            // maybe pDef describes an object that so far has only been
            // recognized as SbxVARIANT - then change type of pDef
            // from 16.12.95 (similar cases possible perhaps?!?)
            if( eType == SbxOBJECT && pDef->GetType() == SbxVARIANT )
            {
                // Do not modify the type of procedure arguments
                if (pDef->GetScope() != SbPARAM)
                    pDef->SetType(SbxOBJECT);
            }
            else
            {
                pParser->Error( ERRCODE_BASIC_BAD_DECLARATION, aSym );
                bError = true;
            }
        }
    }
    auto pNd = std::make_unique<SbiExprNode>( *pDef, eType );
    if( !pPar )
    {
        pPar = SbiExprList::ParseParameters( pParser,false,false );
    }
    pNd->aVar.pPar = pPar.release();
    pNd->aVar.pvMorePar = pvMoreParLcl.release();
    if( bObj )
    {
        // from 8.1.95: Object may also be of the type SbxVARIANT
        // (but do not modify type of procedure arguments)
        if (pDef->GetType() == SbxVARIANT && pDef->GetScope() != SbPARAM)
            pDef->SetType( SbxOBJECT );
        // if we scan something with point,
        // the type must be SbxOBJECT
        if( pDef->GetType() != SbxOBJECT && pDef->GetType() != SbxVARIANT )
        {
            // defer error until runtime if in vba mode
            if ( !pParser->IsVBASupportOn() )
            {
                pParser->Error( ERRCODE_BASIC_BAD_DECLARATION, aSym );
                bError = true;
            }
        }
        if( !bError )
        {
            pNd->aVar.pNext = ObjTerm( *pDef ).release();
        }
    }

    pParser->UnlockColumn();
    return pNd;
}

// construction of an object term. A term of this kind is part
// of an expression that begins with an object variable.

std::unique_ptr<SbiExprNode> SbiExpression::ObjTerm( SbiSymDef& rObj )
{
    pParser->Next();
    SbiToken eTok = pParser->Next();
    if( eTok != SYMBOL && !SbiTokenizer::IsKwd( eTok ) && !SbiTokenizer::IsExtra( eTok ) )
    {
        // #66745 Some operators can also be allowed
        // as identifiers, important for StarOne
        if( eTok != MOD && eTok != NOT && eTok != AND && eTok != OR &&
            eTok != XOR && eTok != EQV && eTok != IMP && eTok != IS )
        {
            pParser->Error( ERRCODE_BASIC_VAR_EXPECTED );
            bError = true;
        }
    }

    if( bError )
    {
        return nullptr;
    }
    OUString aSym( pParser->GetSym() );
    SbxDataType eType = pParser->GetType();
    SbiExprListPtr pPar;
    SbiExprListVector* pvMoreParLcl = nullptr;
    eTok = pParser->Peek();

    if( DoParametersFollow( pParser, eCurExpr, eTok ) )
    {
        pPar = SbiExprList::ParseParameters( pParser, false/*bStandaloneExpression*/ );
        bError = bError || !pPar->IsValid();
        eTok = pParser->Peek();

        // i109624 check for additional sets of parameters
        while( eTok == LPAREN )
        {
            if( pvMoreParLcl == nullptr )
            {
                pvMoreParLcl = new SbiExprListVector;
            }
            SbiExprListPtr pAddPar = SbiExprList::ParseParameters( pParser );
            bError = bError || !pPar->IsValid();
            pvMoreParLcl->push_back( std::move(pAddPar) );
            eTok = pParser->Peek();
        }
    }
    bool bObj = ( ( eTok == DOT || eTok == EXCLAM ) && !pParser->WhiteSpace() );
    if( bObj )
    {
        if( eType == SbxVARIANT )
        {
            eType = SbxOBJECT;
        }
        else
        {
            // Name%. does really not work!
            pParser->Error( ERRCODE_BASIC_BAD_DECLARATION, aSym );
            bError = true;
        }
    }

    // an object's symbol pool is always PUBLIC
    SbiSymPool& rPool = rObj.GetPool();
    rPool.SetScope( SbPUBLIC );
    SbiSymDef* pDef = rPool.Find( aSym );
    if( !pDef )
    {
        pDef = AddSym( eTok, rPool, eCurExpr, aSym, eType, pPar.get() );
        pDef->SetType( eType );
    }

    auto pNd = std::make_unique<SbiExprNode>( *pDef, eType );
    pNd->aVar.pPar = pPar.release();
    pNd->aVar.pvMorePar = pvMoreParLcl;
    if( bObj )
    {
        if( pDef->GetType() == SbxVARIANT )
        {
            pDef->SetType( SbxOBJECT );
        }
        if( pDef->GetType() != SbxOBJECT )
        {
            pParser->Error( ERRCODE_BASIC_BAD_DECLARATION, aSym );
            bError = true;
        }
        if( !bError )
        {
            pNd->aVar.pNext = ObjTerm( *pDef ).release();
            pNd->eType = eType;
        }
    }
    return pNd;
}

// an operand can be:
//      constant
//      scalar variable
//      structure elements
//      array elements
//      functions
//      bracketed expressions

std::unique_ptr<SbiExprNode> SbiExpression::Operand( bool bUsedForTypeOf )
{
    std::unique_ptr<SbiExprNode> pRes;

    // test operand:
    switch( SbiToken eTok = pParser->Peek() )
    {
    case SYMBOL:
        pRes = Term();
        // process something like "IF Not r Is Nothing Then .."
        if( !bUsedForTypeOf && pParser->IsVBASupportOn() && pParser->Peek() == IS )
        {
            eTok = pParser->Next();
            pRes = std::make_unique<SbiExprNode>( std::move(pRes), eTok, Like() );
        }
        break;
    case DOT:   // .with
        pRes = Term(); break;
    case NOT:
        pRes = VBA_Not();
        break;
    case NUMBER:
        pParser->Next();
        pRes = std::make_unique<SbiExprNode>( pParser->GetDbl(), pParser->GetType() );
        break;
    case FIXSTRING:
        pParser->Next();
        pRes = std::make_unique<SbiExprNode>( pParser->GetSym() ); break;
    case LPAREN:
        pParser->Next();
        if( nParenLevel == 0 && m_eMode == EXPRMODE_LPAREN_PENDING && pParser->Peek() == RPAREN )
        {
            m_eMode = EXPRMODE_EMPTY_PAREN;
            pRes = std::make_unique<SbiExprNode>();   // Dummy node
            pParser->Next();
            break;
        }
        nParenLevel++;
        pRes = Boolean();
        if( pParser->Peek() != RPAREN )
        {
            // If there was a LPARAM, it does not belong to the expression
            if( nParenLevel == 1 && m_eMode == EXPRMODE_LPAREN_PENDING )
            {
                m_eMode = EXPRMODE_LPAREN_NOT_NEEDED;
            }
            else
            {
                pParser->Error( ERRCODE_BASIC_BAD_BRACKETS );
            }
        }
        else
        {
            pParser->Next();
            if( nParenLevel == 1 && m_eMode == EXPRMODE_LPAREN_PENDING )
            {
                SbiToken eTokAfterRParen = pParser->Peek();
                if( eTokAfterRParen == EQ || eTokAfterRParen == LPAREN || eTokAfterRParen == DOT )
                {
                    m_eMode = EXPRMODE_ARRAY_OR_OBJECT;
                }
                else
                {
                    m_eMode = EXPRMODE_STANDARD;
                }
            }
        }
        nParenLevel--;
        break;
    default:
        // keywords here are OK at the moment!
        if( SbiTokenizer::IsKwd( eTok ) )
        {
            pRes = Term();
        }
        else
        {
            pParser->Next();
            pRes = std::make_unique<SbiExprNode>( 1.0, SbxDOUBLE );
            pParser->Error( ERRCODE_BASIC_UNEXPECTED, eTok );
        }
        break;
    }
    return pRes;
}

std::unique_ptr<SbiExprNode> SbiExpression::Unary()
{
    std::unique_ptr<SbiExprNode> pNd;
    SbiToken eTok = pParser->Peek();
    switch( eTok )
    {
        case MINUS:
            eTok = NEG;
            pParser->Next();
            pNd = std::make_unique<SbiExprNode>( Unary(), eTok, nullptr );
            break;
        case NOT:
            if( pParser->IsVBASupportOn() )
            {
                pNd = Operand();
            }
            else
            {
                pParser->Next();
                pNd = std::make_unique<SbiExprNode>( Unary(), eTok, nullptr );
            }
            break;
        case PLUS:
            pParser->Next();
            pNd = Unary();
            break;
        case TYPEOF:
        {
            pParser->Next();
            std::unique_ptr<SbiExprNode> pObjNode = Operand( true/*bUsedForTypeOf*/ );
            pParser->TestToken( IS );
            SbiSymDef* pTypeDef = new SbiSymDef( OUString() );
            pParser->TypeDecl( *pTypeDef, true );
            pNd = std::make_unique<SbiExprNode>( std::move(pObjNode), pTypeDef->GetTypeId() );
            break;
        }
        case NEW:
        {
            pParser->Next();
            SbiSymDef* pTypeDef = new SbiSymDef( OUString() );
            pParser->TypeDecl( *pTypeDef, true );
            pNd = std::make_unique<SbiExprNode>( pTypeDef->GetTypeId() );
            break;
        }
        default:
            pNd = Operand();
    }
    return pNd;
}

std::unique_ptr<SbiExprNode> SbiExpression::Exp()
{
    std::unique_ptr<SbiExprNode> pNd = Unary();
    if( m_eMode != EXPRMODE_EMPTY_PAREN )
    {
        while( pParser->Peek() == EXPON )
        {
            SbiToken eTok = pParser->Next();
            pNd = std::make_unique<SbiExprNode>( std::move(pNd), eTok, Unary() );
        }
    }
    return pNd;
}

std::unique_ptr<SbiExprNode> SbiExpression::MulDiv()
{
    std::unique_ptr<SbiExprNode> pNd = Exp();
    if( m_eMode != EXPRMODE_EMPTY_PAREN )
    {
        for( ;; )
        {
            SbiToken eTok = pParser->Peek();
            if( eTok != MUL && eTok != DIV )
            {
                break;
            }
            eTok = pParser->Next();
            pNd = std::make_unique<SbiExprNode>( std::move(pNd), eTok, Exp() );
        }
    }
    return pNd;
}

std::unique_ptr<SbiExprNode> SbiExpression::IntDiv()
{
    std::unique_ptr<SbiExprNode> pNd = MulDiv();
    if( m_eMode != EXPRMODE_EMPTY_PAREN )
    {
        while( pParser->Peek() == IDIV )
        {
            SbiToken eTok = pParser->Next();
            pNd = std::make_unique<SbiExprNode>( std::move(pNd), eTok, MulDiv() );
        }
    }
    return pNd;
}

std::unique_ptr<SbiExprNode> SbiExpression::Mod()
{
    std::unique_ptr<SbiExprNode> pNd = IntDiv();
    if( m_eMode != EXPRMODE_EMPTY_PAREN )
    {
        while( pParser->Peek() == MOD )
        {
            SbiToken eTok = pParser->Next();
            pNd = std::make_unique<SbiExprNode>( std::move(pNd), eTok, IntDiv() );
        }
    }
    return pNd;
}

std::unique_ptr<SbiExprNode> SbiExpression::AddSub()
{
    std::unique_ptr<SbiExprNode> pNd = Mod();
    if( m_eMode != EXPRMODE_EMPTY_PAREN )
    {
        for( ;; )
        {
            SbiToken eTok = pParser->Peek();
            if( eTok != PLUS && eTok != MINUS )
            {
                break;
            }
            eTok = pParser->Next();
            pNd = std::make_unique<SbiExprNode>( std::move(pNd), eTok, Mod() );
        }
    }
    return pNd;
}

std::unique_ptr<SbiExprNode> SbiExpression::Cat()
{
    std::unique_ptr<SbiExprNode> pNd = AddSub();
    if( m_eMode != EXPRMODE_EMPTY_PAREN )
    {
        for( ;; )
        {
            SbiToken eTok = pParser->Peek();
            if( eTok != CAT )
            {
                break;
            }
            eTok = pParser->Next();
            pNd = std::make_unique<SbiExprNode>( std::move(pNd), eTok, AddSub() );
        }
    }
    return pNd;
}

std::unique_ptr<SbiExprNode> SbiExpression::Comp()
{
    std::unique_ptr<SbiExprNode> pNd = Cat();
    if( m_eMode != EXPRMODE_EMPTY_PAREN )
    {
        for( ;; )
        {
            SbiToken eTok = pParser->Peek();
            if( m_eMode == EXPRMODE_ARRAY_OR_OBJECT )
            {
                break;
            }
            if( eTok != EQ && eTok != NE && eTok != LT &&
                eTok != GT && eTok != LE && eTok != GE )
            {
                break;
            }
            eTok = pParser->Next();
            pNd = std::make_unique<SbiExprNode>( std::move(pNd), eTok, Cat() );
        }
    }
    return pNd;
}


std::unique_ptr<SbiExprNode> SbiExpression::VBA_Not()
{
    std::unique_ptr<SbiExprNode> pNd;

    SbiToken eTok = pParser->Peek();
    if( eTok == NOT )
    {
        pParser->Next();
        pNd = std::make_unique<SbiExprNode>( VBA_Not(), eTok, nullptr );
    }
    else
    {
        pNd = Comp();
    }
    return pNd;
}

std::unique_ptr<SbiExprNode> SbiExpression::Like()
{
    std::unique_ptr<SbiExprNode> pNd = pParser->IsVBASupportOn() ? VBA_Not() : Comp();
    if( m_eMode != EXPRMODE_EMPTY_PAREN )
    {
        short nCount = 0;
        while( pParser->Peek() == LIKE )
        {
            SbiToken eTok = pParser->Next();
            pNd = std::make_unique<SbiExprNode>( std::move(pNd), eTok, Comp() );
            nCount++;
        }
        // multiple operands in a row does not work
        if( nCount > 1 && !pParser->IsVBASupportOn() )
        {
            pParser->Error( ERRCODE_BASIC_SYNTAX );
            bError = true;
        }
    }
    return pNd;
}

std::unique_ptr<SbiExprNode> SbiExpression::Boolean()
{
    std::unique_ptr<SbiExprNode> pNd = Like();
    if( m_eMode != EXPRMODE_EMPTY_PAREN )
    {
        for( ;; )
        {
            SbiToken eTok = pParser->Peek();
            if( (eTok != AND) && (eTok != OR) &&
                (eTok != XOR) && (eTok != EQV) &&
                (eTok != IMP) && (eTok != IS) )
            {
                break;
            }
            eTok = pParser->Next();
            pNd = std::make_unique<SbiExprNode>( std::move(pNd), eTok, Like() );
        }
    }
    return pNd;
}

SbiConstExpression::SbiConstExpression( SbiParser* p ) : SbiExpression( p )
{
    if( pExpr->IsConstant() )
    {
        eType = pExpr->GetType();
        if( pExpr->IsNumber() )
        {
            nVal = pExpr->nVal;
        }
        else
        {
            nVal = 0;
            aVal = pExpr->aStrVal;
        }
    }
    else
    {
        // #40204 special treatment for sal_Bool-constants
        bool bIsBool = false;
        if( pExpr->eNodeType == SbxVARVAL )
        {
            SbiSymDef* pVarDef = pExpr->GetVar();

            bool bBoolVal = false;
            if( pVarDef->GetName().equalsIgnoreAsciiCase( "true" ) )
            {
                bIsBool = true;
                bBoolVal = true;
            }
            else if( pVarDef->GetName().equalsIgnoreAsciiCase( "false" ) )
            //else if( pVarDef->GetName().ICompare( "false" ) == COMPARE_EQUAL )
            {
                bIsBool = true;
                bBoolVal = false;
            }

            if( bIsBool )
            {
                pExpr = std::make_unique<SbiExprNode>( (bBoolVal ? SbxTRUE : SbxFALSE), SbxINTEGER );
                eType = pExpr->GetType();
                nVal = pExpr->nVal;
            }
        }

        if( !bIsBool )
        {
            pParser->Error( ERRCODE_BASIC_SYNTAX );
            eType = SbxDOUBLE;
            nVal = 0;
        }
    }
}

short SbiConstExpression::GetShortValue()
{
    if( eType == SbxSTRING )
    {
        SbxVariableRef refConv = new SbxVariable;
        refConv->PutString( aVal );
        return refConv->GetInteger();
    }
    else
    {
        double n = nVal;
        if( n > 0 )
        {
            n += .5;
        }
        else
        {
            n -= .5;
        }
        if( n > SbxMAXINT )
        {
            n = SbxMAXINT;
            pParser->Error( ERRCODE_BASIC_OUT_OF_RANGE );
        }
        else if( n < SbxMININT )
        {
            n = SbxMININT;
            pParser->Error( ERRCODE_BASIC_OUT_OF_RANGE );
        }

        return static_cast<short>(n);
    }
}


SbiExprList::SbiExprList( )
{
    nDim   = 0;
    bError = false;
    bBracket = false;
}

SbiExprList::~SbiExprList() {}

SbiExpression* SbiExprList::Get( size_t n )
{
    return aData[n].get();
}

void SbiExprList::addExpression( std::unique_ptr<SbiExpression>&& pExpr )
{
    aData.push_back(std::move(pExpr));
}

// the parameter list is completely parsed
// "procedurename()" is OK
// it's a function without parameters then
// i. e. you give an array as procedure parameter

// #i79918/#i80532: bConst has never been set to true
// -> reused as bStandaloneExpression
//SbiParameters::SbiParameters( SbiParser* p, sal_Bool bConst, sal_Bool bPar) :
SbiExprListPtr SbiExprList::ParseParameters( SbiParser* pParser, bool bStandaloneExpression, bool bPar)
{
    auto pExprList = std::make_unique<SbiExprList>();
    if( !bPar )
    {
        return pExprList;
    }

    SbiToken eTok = pParser->Peek();

    bool bAssumeExprLParenMode = false;
    bool bAssumeArrayMode = false;
    if( eTok == LPAREN )
    {
        if( bStandaloneExpression )
        {
            bAssumeExprLParenMode = true;
        }
        else
        {
            pExprList->bBracket = true;
            pParser->Next();
            eTok = pParser->Peek();
        }
    }


    if( ( pExprList->bBracket && eTok == RPAREN ) || SbiTokenizer::IsEoln( eTok ) )
    {
        if( eTok == RPAREN )
        {
            pParser->Next();
        }
        return pExprList;
    }
    // read in parameter table and lay down in correct order!
    while( !pExprList->bError )
    {
        std::unique_ptr<SbiExpression> pExpr;
        // missing argument
        if( eTok == COMMA )
        {
            pExpr = std::make_unique<SbiExpression>( pParser, 0, SbxEMPTY );
        }
        // named arguments: either .name= or name:=
        else
        {
            bool bByVal = false;
            if( eTok == BYVAL )
            {
                bByVal = true;
                pParser->Next();
                eTok = pParser->Peek();
            }

            if( bAssumeExprLParenMode )
            {
                pExpr = std::make_unique<SbiExpression>( pParser, SbSTDEXPR, EXPRMODE_LPAREN_PENDING );
                bAssumeExprLParenMode = false;

                SbiExprMode eModeAfter = pExpr->m_eMode;
                if( eModeAfter == EXPRMODE_LPAREN_NOT_NEEDED )
                {
                    pExprList->bBracket = true;
                }
                else if( eModeAfter == EXPRMODE_ARRAY_OR_OBJECT )
                {
                    // Expression "looks" like an array assignment
                    // a(...)[(...)] = ? or a(...).b(...)
                    // RPAREN is already parsed
                    pExprList->bBracket = true;
                    bAssumeArrayMode = true;
                    eTok = NIL;
                }
                else if( eModeAfter == EXPRMODE_EMPTY_PAREN )
                {
                    pExprList->bBracket = true;
                    return pExprList;
                }
            }
            else
            {
                pExpr = std::make_unique<SbiExpression>( pParser );
            }
            if( bByVal && pExpr->IsLvalue() )
            {
                pExpr->SetByVal();
            }
            if( !bAssumeArrayMode )
            {
                OUString aName;
                if( pParser->Peek() == ASSIGN )
                {
                    // VBA mode: name:=
                    // SbiExpression::Term() has made as string out of it
                    aName = pExpr->GetString();
                    pParser->Next();
                    pExpr = std::make_unique<SbiExpression>( pParser );
                }
                pExpr->GetName() = aName;
            }
        }
        pExprList->bError = pExprList->bError || !pExpr->IsValid();
        pExprList->aData.push_back(std::move(pExpr));
        if( bAssumeArrayMode )
        {
            break;
        }
        // next element?
        eTok = pParser->Peek();
        if( eTok != COMMA )
        {
            if( ( pExprList->bBracket && eTok == RPAREN ) || SbiTokenizer::IsEoln( eTok ) )
            {
                // tdf#80731
                if (SbiTokenizer::IsEoln(eTok) && pExprList->bBracket)
                {
                    // tdf#106529: only fail here in strict mode (i.e. when compiled from IDE), and
                    // allow legacy code with missing closing parenthesis when started e.g. from
                    // extensions and event handlers
                    if (comphelper::IsContextFlagActive(u"BasicStrict"_ustr))
                    {
                        pParser->Error(ERRCODE_BASIC_EXPECTED, RPAREN);
                        pExprList->bError = true;
                    }
                }
                break;
            }
            pParser->Error( pExprList->bBracket ? ERRCODE_BASIC_BAD_BRACKETS : ERRCODE_BASIC_EXPECTED, COMMA );
            pExprList->bError = true;
        }
        else
        {
            pParser->Next();
            eTok = pParser->Peek();
            if( ( pExprList->bBracket && eTok == RPAREN ) || SbiTokenizer::IsEoln( eTok ) )
            {
                break;
            }
        }
    }
    // closing bracket
    if( eTok == RPAREN )
    {
        pParser->Next();
        pParser->Peek();
        if( !pExprList->bBracket )
        {
            pParser->Error( ERRCODE_BASIC_BAD_BRACKETS );
            pExprList->bError = true;
        }
    }
    pExprList->nDim = pExprList->GetSize();
    return pExprList;
}

// A list of array dimensions is parsed.

SbiExprListPtr SbiExprList::ParseDimList( SbiParser* pParser )
{
    auto pExprList = std::make_unique<SbiExprList>();

    if( pParser->Next() != LPAREN )
    {
        pParser->Error( ERRCODE_BASIC_EXPECTED, LPAREN );
        pExprList->bError = truereturn pExprList;
    }

    if( pParser->Peek() != RPAREN )
    {
        SbiToken eTok;
        for( ;; )
        {
            auto pExpr1 = std::make_unique<SbiExpression>( pParser );
            eTok = pParser->Next();
            if( eTok == TO )
            {
                auto pExpr2 = std::make_unique<SbiExpression>( pParser );
                pExpr1->ConvertToIntConstIfPossible();
                pExpr2->ConvertToIntConstIfPossible();
                eTok = pParser->Next();
                pExprList->bError = pExprList->bError || !pExpr1->IsValid() || !pExpr2->IsValid();
                pExprList->aData.push_back(std::move(pExpr1));
                pExprList->aData.push_back(std::move(pExpr2));
            }
            else
            {
                pExpr1->SetBased();
                pExpr1->ConvertToIntConstIfPossible();
                pExprList->bError = pExprList->bError || !pExpr1->IsValid();
                pExprList->aData.push_back(std::move(pExpr1));
            }
            pExprList->nDim++;
            if( eTok == RPAREN ) break;
            if( eTok != COMMA )
            {
                pParser->Error( ERRCODE_BASIC_BAD_BRACKETS );
                pParser->Next();
                break;
            }
        }
    }
    else pParser->Next();
    return pExprList;
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */

93%


¤ Dauer der Verarbeitung: 0.17 Sekunden  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.