Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/LibreOffice/sc/source/ui/pagedlg/   (Office von Apache Version 25.8.3.2©)  Datei vom 5.10.2025 mit Größe 20 kB image not shown  

Quelle  tptable.cxx   Sprache: C

 
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */


#undef SC_DLLIMPLEMENTATION

#include <scitems.hxx>

#include <osl/diagnose.h>

#include <tptable.hxx>
#include <global.hxx>
#include <attrib.hxx>
#include <bitmaps.hlst>

// Static Data

const WhichRangesContainer ScTablePage::pPageTableRanges(
    svl::Items<ATTR_PAGE_NOTES, ATTR_PAGE_FIRSTPAGENO>);

static bool lcl_PutVObjModeItem(TypedWhichId<ScViewObjectModeItem>  nWhich,
                          SfxItemSet&       rCoreSet,
                          const SfxItemSet& rOldSet,
                          const weld::Toggleable& rBtn);

static bool lcl_PutScaleItem( TypedWhichId<SfxUInt16Item>    nWhich,
                       SfxItemSet&          rCoreSet,
                       const SfxItemSet&    rOldSet,
                       const weld::ComboBox& rListBox,
                       sal_uInt16           nLBEntry,
                       const weld::MetricSpinButton& rEd,
                       sal_uInt16           nValue );

static bool lcl_PutScaleItem2( TypedWhichId<ScPageScaleToItem>   nWhich,
                       SfxItemSet&          rCoreSet,
                       const SfxItemSet&    rOldSet,
                       const weld::ComboBox& rListBox,
                       sal_uInt16           nLBEntry,
                       const weld::SpinButton& rEd1,
                       sal_uInt16           nOrigScalePageWidth,
                       const weld::SpinButton& rEd2,
                       sal_uInt16           nOrigScalePageHeight );

static bool lcl_PutScaleItem3( TypedWhichId<SfxUInt16Item>    nWhich,
                       SfxItemSet&          rCoreSet,
                       const SfxItemSet&    rOldSet,
                       const weld::ComboBox& rListBox,
                       sal_uInt16           nLBEntry,
                       const weld::SpinButton& rEd,
                       sal_uInt16           nValue );

static bool lcl_PutBoolItem( TypedWhichId<SfxBoolItem> nWhich,
                      SfxItemSet&       rCoreSet,
                      const SfxItemSet& rOldSet,
                      bool              bIsChecked,
                      bool              bSavedValue );

namespace {

bool WAS_DEFAULT(sal_uInt16 w, SfxItemSet const & s)
return SfxItemState::DEFAULT==s.GetItemState(w); }

}

// List box entries "Scaling mode"
#define SC_TPTABLE_SCALE_PERCENT    0
#define SC_TPTABLE_SCALE_TO         1
#define SC_TPTABLE_SCALE_TO_PAGES   2

ScTablePage::ScTablePage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rCoreAttrs)
    : SfxTabPage(pPage, pController, u"modules/scalc/ui/sheetprintpage.ui"_ustr, u"SheetPrintPage"_ustr, &rCoreAttrs)
    , m_nOrigScalePageWidth(0)
    , m_nOrigScalePageHeight(0)
    , m_xBtnTopDown(m_xBuilder->weld_radio_button(u"radioBTN_TOPDOWN"_ustr))
    , m_xBtnLeftRight(m_xBuilder->weld_radio_button(u"radioBTN_LEFTRIGHT"_ustr))
    , m_xBmpPageDir(m_xBuilder->weld_image(u"imageBMP_PAGEDIR"_ustr))
    , m_xBtnPageNo(m_xBuilder->weld_check_button(u"checkBTN_PAGENO"_ustr))
    , m_xEdPageNo(m_xBuilder->weld_spin_button(u"spinED_PAGENO"_ustr))
    , m_xBtnHeaders(m_xBuilder->weld_check_button(u"checkBTN_HEADER"_ustr))
    , m_xBtnGrid(m_xBuilder->weld_check_button(u"checkBTN_GRID"_ustr))
    , m_xBtnNotes(m_xBuilder->weld_check_button(u"checkBTN_NOTES"_ustr))
    , m_xBtnObjects(m_xBuilder->weld_check_button(u"checkBTN_OBJECTS"_ustr))
    , m_xBtnCharts(m_xBuilder->weld_check_button(u"checkBTN_CHARTS"_ustr))
    , m_xBtnDrawings(m_xBuilder->weld_check_button(u"checkBTN_DRAWINGS"_ustr))
    , m_xBtnFormulas(m_xBuilder->weld_check_button(u"checkBTN_FORMULAS"_ustr))
    , m_xBtnNullVals(m_xBuilder->weld_check_button(u"checkBTN_NULLVALS"_ustr))
    , m_xLbScaleMode(m_xBuilder->weld_combo_box(u"comboLB_SCALEMODE"_ustr))
    , m_xBxScaleAll(m_xBuilder->weld_widget(u"boxSCALEALL"_ustr))
    , m_xEdScaleAll(m_xBuilder->weld_metric_spin_button(u"spinED_SCALEALL"_ustr, FieldUnit::PERCENT))
    , m_xGrHeightWidth(m_xBuilder->weld_widget(u"gridWH"_ustr))
    , m_xEdScalePageWidth(m_xBuilder->weld_spin_button(u"spinED_SCALEPAGEWIDTH"_ustr))
    , m_xCbScalePageWidth(m_xBuilder->weld_check_button(u"labelWP"_ustr))
    , m_xEdScalePageHeight(m_xBuilder->weld_spin_button(u"spinED_SCALEPAGEHEIGHT"_ustr))
    , m_xCbScalePageHeight(m_xBuilder->weld_check_button(u"labelHP"_ustr))
    , m_xBxScalePageNum(m_xBuilder->weld_widget(u"boxNP"_ustr))
    , m_xEdScalePageNum(m_xBuilder->weld_spin_button(u"spinED_SCALEPAGENUM"_ustr))
{
    SetExchangeSupport();

    m_xBtnPageNo->connect_toggled(LINK(this,ScTablePage,PageNoHdl));
    m_xBtnTopDown->connect_toggled(LINK(this,ScTablePage,PageDirHdl));
    m_xBtnLeftRight->connect_toggled(LINK(this,ScTablePage,PageDirHdl));
    m_xLbScaleMode->connect_changed(LINK(this,ScTablePage,ScaleHdl));
    m_xCbScalePageWidth->connect_toggled(LINK(this, ScTablePage, ToggleHdl));
    m_xCbScalePageHeight->connect_toggled(LINK(this, ScTablePage, ToggleHdl));
}

void ScTablePage::ShowImage()
{
    OUString aImg(m_xBtnLeftRight->get_active() ? BMP_LEFTRIGHT : BMP_TOPDOWN);
    m_xBmpPageDir->set_from_icon_name(aImg);
}

ScTablePage::~ScTablePage()
{
}

std::unique_ptr<SfxTabPage> ScTablePage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rCoreSet)
{
    return std::make_unique<ScTablePage>(pPage, pController, *rCoreSet);
}

void ScTablePage::Reset( const SfxItemSet* rCoreSet )
{
    bool    bTopDown = rCoreSet->Get(SID_SCATTR_PAGE_TOPDOWN).GetValue();

    // sal_Bool flags
    m_xBtnNotes->set_active( rCoreSet->Get(SID_SCATTR_PAGE_NOTES).GetValue() );
    m_xBtnGrid->set_active( rCoreSet->Get(SID_SCATTR_PAGE_GRID).GetValue() );
    m_xBtnHeaders->set_active( rCoreSet->Get(SID_SCATTR_PAGE_HEADERS).GetValue() );
    m_xBtnFormulas->set_active( rCoreSet->Get(SID_SCATTR_PAGE_FORMULAS).GetValue() );
    m_xBtnNullVals->set_active( rCoreSet->Get(SID_SCATTR_PAGE_NULLVALS).GetValue() );
    m_xBtnTopDown->set_active( bTopDown );
    m_xBtnLeftRight->set_active( !bTopDown );

    // first printed page:
    sal_uInt16 nPage = rCoreSet->Get(SID_SCATTR_PAGE_FIRSTPAGENO).GetValue();
    m_xBtnPageNo->set_active( nPage != 0 );
    m_xEdPageNo->set_value( (nPage != 0) ? nPage : 1 );
    PageNoHdl(nullptr);

    // object representation:
    m_xBtnCharts->set_active( rCoreSet->Get(SID_SCATTR_PAGE_CHARTS).GetValue() == VOBJ_MODE_SHOW );
    m_xBtnObjects->set_active( rCoreSet->Get(SID_SCATTR_PAGE_OBJECTS).GetValue() == VOBJ_MODE_SHOW );
    m_xBtnDrawings->set_active( rCoreSet->Get(SID_SCATTR_PAGE_DRAWINGS).GetValue() == VOBJ_MODE_SHOW );

    // scaling:
    constexpr auto nWhichPageScale = SID_SCATTR_PAGE_SCALE;
    if ( rCoreSet->GetItemState( nWhichPageScale ) >= SfxItemState::DEFAULT )
    {
        sal_uInt16 nScale = rCoreSet->Get(nWhichPageScale).GetValue();
        if( nScale > 0 )
            m_xLbScaleMode->set_active(SC_TPTABLE_SCALE_PERCENT);
        m_xEdScaleAll->set_value((nScale > 0) ? nScale : 100, FieldUnit::PERCENT);
    }

    constexpr auto nWhichScaleTo = SID_SCATTR_PAGE_SCALETO;
    if ( rCoreSet->GetItemState( nWhichScaleTo ) >= SfxItemState::DEFAULT )
    {
        const ScPageScaleToItem& rItem = rCoreSet->Get( nWhichScaleTo );
        sal_uInt16 nWidth = rItem.GetWidth();
        sal_uInt16 nHeight = rItem.GetHeight();

        /*  width==0 and height==0 is invalid state, used as "not selected".
            Dialog shows width=height=1 then. */

        if (nWidth || nHeight)
            m_xLbScaleMode->set_active(SC_TPTABLE_SCALE_TO);
        else
            nWidth = nHeight = 1;

        if (nWidth)
            m_xEdScalePageWidth->set_value(nWidth);
        else
            m_xEdScalePageWidth->set_text(OUString());

        m_xEdScalePageWidth->set_sensitive(nWidth != 0);
        m_xCbScalePageWidth->set_active(nWidth != 0);

        if(nHeight)
            m_xEdScalePageHeight->set_value(nHeight);
        else
            m_xEdScalePageHeight->set_text(OUString());

        m_xEdScalePageHeight->set_sensitive(nHeight != 0);
        m_xCbScalePageHeight->set_active(nHeight != 0);
    }

    constexpr auto nWhichScale = SID_SCATTR_PAGE_SCALETOPAGES;
    if ( rCoreSet->GetItemState( nWhichScale ) >= SfxItemState::DEFAULT )
    {
        sal_uInt16 nPages = rCoreSet->Get(nWhichScale).GetValue();
        if( nPages > 0 )
            m_xLbScaleMode->set_active(SC_TPTABLE_SCALE_TO_PAGES);
        m_xEdScalePageNum->set_value( (nPages > 0) ? nPages : 1 );
    }

    if (m_xLbScaleMode->get_active() == -1)
    {
        // fall back to 100%
        OSL_FAIL( "ScTablePage::Reset - missing scaling item" );
        m_xLbScaleMode->set_active(SC_TPTABLE_SCALE_PERCENT);
        m_xEdScaleAll->set_value(100, FieldUnit::PERCENT);
    }

    PageDirHdl(*m_xBtnTopDown);
    ScaleHdl(*m_xLbScaleMode);

    // remember for FillItemSet
    m_xBtnFormulas->save_state();
    m_xBtnNullVals->save_state();
    m_xBtnNotes->save_state();
    m_xBtnGrid->save_state();
    m_xBtnHeaders->save_state();
    m_xBtnTopDown->save_state();
    m_xBtnLeftRight->save_state();
    m_xLbScaleMode->save_value();
    m_xBtnCharts->save_state();
    m_xBtnObjects->save_state();
    m_xBtnDrawings->save_state();
    m_xBtnPageNo->save_state();
    m_xEdPageNo->save_value();
    m_xEdScaleAll->save_value();
    m_nOrigScalePageWidth = m_xEdScalePageWidth->get_sensitive() ? m_xEdScalePageWidth->get_value() : 0;
    m_nOrigScalePageHeight = m_xEdScalePageHeight->get_sensitive() ? m_xEdScalePageHeight->get_value() : 0;
    m_xEdScalePageNum->save_value();
}

bool ScTablePage::FillItemSet( SfxItemSet* rCoreSet )
{
    const SfxItemSet&   rOldSet      = GetItemSet();
    constexpr TypedWhichId<SfxUInt16Item> nWhichPageNo = SID_SCATTR_PAGE_FIRSTPAGENO;
    bool                bDataChanged = false;

    // sal_Bool flags
    bDataChanged |= lcl_PutBoolItem( SID_SCATTR_PAGE_NOTES,
                                     *rCoreSet, rOldSet,
                                     m_xBtnNotes->get_active(),
                                     m_xBtnNotes->get_saved_state() != TRISTATE_FALSE );

    bDataChanged |= lcl_PutBoolItem( SID_SCATTR_PAGE_GRID,
                                     *rCoreSet, rOldSet,
                                     m_xBtnGrid->get_active(),
                                     m_xBtnGrid->get_saved_state() != TRISTATE_FALSE );

    bDataChanged |= lcl_PutBoolItem( SID_SCATTR_PAGE_HEADERS,
                                     *rCoreSet, rOldSet,
                                     m_xBtnHeaders->get_active(),
                                     m_xBtnHeaders->get_saved_state() != TRISTATE_FALSE );

    bDataChanged |= lcl_PutBoolItem( SID_SCATTR_PAGE_TOPDOWN,
                                     *rCoreSet, rOldSet,
                                     m_xBtnTopDown->get_active(),
                                     m_xBtnTopDown->get_saved_state() != TRISTATE_FALSE );

    bDataChanged |= lcl_PutBoolItem( SID_SCATTR_PAGE_FORMULAS,
                                     *rCoreSet, rOldSet,
                                     m_xBtnFormulas->get_active(),
                                     m_xBtnFormulas->get_saved_state() != TRISTATE_FALSE );

    bDataChanged |= lcl_PutBoolItem( SID_SCATTR_PAGE_NULLVALS,
                                     *rCoreSet, rOldSet,
                                     m_xBtnNullVals->get_active(),
                                     m_xBtnNullVals->get_saved_state() != TRISTATE_FALSE );

    // first printed page:
    bool bUseValue = m_xBtnPageNo->get_active();

    if (   WAS_DEFAULT(nWhichPageNo,rOldSet)
        && (    (!bUseValue && 0 == m_xBtnPageNo->get_saved_state())
            || (   bUseValue && 1 == m_xBtnPageNo->get_saved_state()
                   && ! m_xEdPageNo->get_value_changed_from_saved() ) ) )
    {
            rCoreSet->ClearItem( nWhichPageNo );
    }
    else
    {
        sal_uInt16 nPage = static_cast<sal_uInt16>( m_xBtnPageNo->get_active()
                                    ? m_xEdPageNo->get_value()
                                    : 0 );

        rCoreSet->Put( SfxUInt16Item( nWhichPageNo, nPage ) );
        bDataChanged = true;
    }

    // object representation:
    bDataChanged |= lcl_PutVObjModeItem( SID_SCATTR_PAGE_CHARTS,
                                         *rCoreSet, rOldSet, *m_xBtnCharts );

    bDataChanged |= lcl_PutVObjModeItem( SID_SCATTR_PAGE_OBJECTS,
                                         *rCoreSet, rOldSet, *m_xBtnObjects );

    bDataChanged |= lcl_PutVObjModeItem( SID_SCATTR_PAGE_DRAWINGS,
                                         *rCoreSet, rOldSet, *m_xBtnDrawings );

    // scaling:
    if( !m_xEdScalePageWidth->get_sensitive() && !m_xEdScalePageHeight->get_sensitive() )
    {
        m_xLbScaleMode->set_active(SC_TPTABLE_SCALE_PERCENT);
        m_xEdScaleAll->set_value(100, FieldUnit::PERCENT);
    }

    bDataChanged |= lcl_PutScaleItem( SID_SCATTR_PAGE_SCALE,
                                      *rCoreSet, rOldSet,
                                      *m_xLbScaleMode, SC_TPTABLE_SCALE_PERCENT,
                                      *m_xEdScaleAll, static_cast<sal_uInt16>(m_xEdScaleAll->get_value(FieldUnit::PERCENT)) );

    bDataChanged |= lcl_PutScaleItem2( SID_SCATTR_PAGE_SCALETO,
                                      *rCoreSet, rOldSet,
                                      *m_xLbScaleMode, SC_TPTABLE_SCALE_TO,
                                      *m_xEdScalePageWidth, m_nOrigScalePageWidth,
                                      *m_xEdScalePageHeight, m_nOrigScalePageHeight );

    bDataChanged |= lcl_PutScaleItem3( SID_SCATTR_PAGE_SCALETOPAGES,
                                      *rCoreSet, rOldSet,
                                      *m_xLbScaleMode, SC_TPTABLE_SCALE_TO_PAGES,
                                      *m_xEdScalePageNum, static_cast<sal_uInt16>(m_xEdScalePageNum->get_value()) );

    return bDataChanged;
}

DeactivateRC ScTablePage::DeactivatePage( SfxItemSet* pSetP )
{
    if ( pSetP )
        FillItemSet( pSetP );

    return DeactivateRC::LeavePage;
}

// Handler:

IMPL_LINK_NOARG(ScTablePage, PageDirHdl, weld::Toggleable&, void)
{
    ShowImage();
}

IMPL_LINK(ScTablePage, PageNoHdl, weld::Toggleable&, rBtn, void)
{
    PageNoHdl(&rBtn);
}

void ScTablePage::PageNoHdl(const weld::Toggleable* pBtn)
{
    if (m_xBtnPageNo->get_active())
    {
        m_xEdPageNo->set_sensitive(true);
        if (pBtn)
            m_xEdPageNo->grab_focus();
    }
    else
        m_xEdPageNo->set_sensitive(false);
}

IMPL_LINK_NOARG(ScTablePage, ScaleHdl, weld::ComboBox&, void)
{
    // controls for Box "Reduce/enlarge"
    m_xBxScaleAll->set_visible(m_xLbScaleMode->get_active() == SC_TPTABLE_SCALE_PERCENT);

    // controls for Grid "Scale to width/height"
    m_xGrHeightWidth->set_visible(m_xLbScaleMode->get_active() == SC_TPTABLE_SCALE_TO);

    // controls for Box "Scale to pages"
    m_xBxScalePageNum->set_visible(m_xLbScaleMode->get_active() == SC_TPTABLE_SCALE_TO_PAGES);
}

IMPL_LINK(ScTablePage, ToggleHdl, weld::Toggleable&, rBox, void)
{
    if (&rBox == m_xCbScalePageWidth.get())
    {
        if (!rBox.get_active())
        {
            m_xEdScalePageWidth->set_text(OUString());
            m_xEdScalePageWidth->set_sensitive(false);
        }
        else
        {
            m_xEdScalePageWidth->set_value(1);
            m_xEdScalePageWidth->set_sensitive(true);
        }
    }
    else
    {
        if (!rBox.get_active())
        {
            m_xEdScalePageHeight->set_text(OUString());
            m_xEdScalePageHeight->set_sensitive(false);
        }
        else
        {
            m_xEdScalePageHeight->set_value(1);
            m_xEdScalePageHeight->set_sensitive(true);
        }
    }
}

// Helper functions for FillItemSet:

static bool lcl_PutBoolItem( TypedWhichId<SfxBoolItem>  nWhich,
                     SfxItemSet&        rCoreSet,
                     const SfxItemSet&  rOldSet,
                     bool               bIsChecked,
                     bool               bSavedValue )
{
    bool bDataChanged = (   bSavedValue == bIsChecked
                         && WAS_DEFAULT(nWhich,rOldSet) );

    if ( bDataChanged )
        rCoreSet.ClearItem(nWhich);
    else
        rCoreSet.Put( SfxBoolItem( nWhich, bIsChecked ) );

    return bDataChanged;
}

static bool lcl_PutVObjModeItem( TypedWhichId<ScViewObjectModeItem>  nWhich,
                         SfxItemSet&        rCoreSet,
                         const SfxItemSet&  rOldSet,
                         const weld::Toggleable&    rBtn )
{
    bool bIsChecked   = rBtn.get_active();
    bool bDataChanged =     rBtn.get_saved_state() == (bIsChecked ? 1 : 0)
                         && WAS_DEFAULT(nWhich,rOldSet);

    if ( bDataChanged )
        rCoreSet.ClearItem( nWhich );

    else
        rCoreSet.Put( ScViewObjectModeItem( nWhich, bIsChecked
                                                    ? VOBJ_MODE_SHOW
                                                    : VOBJ_MODE_HIDE ) );
    return bDataChanged;
}

static bool lcl_PutScaleItem( TypedWhichId<SfxUInt16Item> nWhich,
                      SfxItemSet&           rCoreSet,
                      const SfxItemSet&     rOldSet,
                      const weld::ComboBox& rListBox,
                      sal_uInt16            nLBEntry,
                      const weld::MetricSpinButton& rEd,
                      sal_uInt16            nValue )
{
    bool bIsSel = (rListBox.get_active() == nLBEntry);
    bool bDataChanged = (rListBox.get_value_changed_from_saved()) ||
                        rEd.get_value_changed_from_saved() ||
                        !WAS_DEFAULT( nWhich, rOldSet );

    if( bDataChanged )
        rCoreSet.Put( SfxUInt16Item( nWhich, bIsSel ? nValue : 0 ) );
    else
        rCoreSet.ClearItem( nWhich );

    return bDataChanged;
}

static bool lcl_PutScaleItem2( TypedWhichId<ScPageScaleToItem> nWhich,
                      SfxItemSet&           rCoreSet,
                      const SfxItemSet&     rOldSet,
                      const weld::ComboBox& rListBox,
                      sal_uInt16            nLBEntry,
                      const weld::SpinButton& rEd1,
                      sal_uInt16            nOrigScalePageWidth,
                      const weld::SpinButton& rEd2,
                      sal_uInt16            nOrigScalePageHeight )
{
    sal_uInt16 nValue1 = rEd1.get_sensitive() ? rEd1.get_value() : 0;
    sal_uInt16 nValue2 = rEd2.get_sensitive() ? rEd2.get_value() : 0;
    bool bIsSel = (rListBox.get_active() == nLBEntry);
    bool bDataChanged = (rListBox.get_value_changed_from_saved()) ||
                        nValue1 != nOrigScalePageWidth ||
                        nValue1 != nOrigScalePageHeight ||
                        !WAS_DEFAULT( nWhich, rOldSet );

    if( bDataChanged )
    {
        ScPageScaleToItem aItem;
        if( bIsSel )
            aItem.Set( nValue1, nValue2 );
        rCoreSet.Put( aItem );
    }
    else
        rCoreSet.ClearItem( nWhich );

    return bDataChanged;
}

static bool lcl_PutScaleItem3( TypedWhichId<SfxUInt16Item> nWhich,
                      SfxItemSet&           rCoreSet,
                      const SfxItemSet&     rOldSet,
                      const weld::ComboBox& rListBox,
                      sal_uInt16            nLBEntry,
                      const weld::SpinButton& rEd,
                      sal_uInt16            nValue )
{
    bool bIsSel = (rListBox.get_active() == nLBEntry);
    bool bDataChanged = (rListBox.get_value_changed_from_saved()) ||
                        rEd.get_value_changed_from_saved() ||
                        !WAS_DEFAULT( nWhich, rOldSet );

    if( bDataChanged )
        rCoreSet.Put( SfxUInt16Item( nWhich, bIsSel ? nValue : 0 ) );
    else
        rCoreSet.ClearItem( nWhich );

    return bDataChanged;
}


/* vim:set shiftwidth=4 softtabstop=4 expandtab: */

Messung V0.5
C=91 H=95 G=92

¤ Dauer der Verarbeitung: 0.14 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.