Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/LibreOffice/sd/source/ui/dlg/   (Office von Apache Version 25.8.3.2©)  Datei vom 5.10.2025 mit Größe 6 kB image not shown  

Quelle  gluectrl.cxx   Sprache: C

 
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */


#include <sal/config.h>

#include <comphelper/propertyvalue.hxx>
#include <svx/svdglue.hxx>
#include <svl/intitem.hxx>
#include <vcl/toolbox.hxx>

#include <strings.hrc>
#include <gluectrl.hxx>
#include <sdresid.hxx>
#include <app.hrc>

#include <com/sun/star/frame/XDispatchProvider.hpp>
#include <com/sun/star/frame/XFrame.hpp>

using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::beans;
using namespace ::com::sun::star::frame;

// at the moment, Joe only supports the methods specified below
#define ESCDIR_COUNT 5
const SdrEscapeDirection aEscDirArray[] =
{
    SdrEscapeDirection::SMART,
    SdrEscapeDirection::LEFT,
    SdrEscapeDirection::RIGHT,
    SdrEscapeDirection::TOP,
    SdrEscapeDirection::BOTTOM
};

SFX_IMPL_TOOLBOX_CONTROL( SdTbxCtlGlueEscDir, SfxUInt16Item )

/**
 * Constructor for gluepoint escape direction Listbox
 */

GlueEscDirLB::GlueEscDirLB(vcl::Window* pParent, const Reference<XFrame>& rFrame)
    : InterimItemWindow(pParent, u"modules/simpress/ui/gluebox.ui"_ustr, u"GlueBox"_ustr)
    , m_xFrame(rFrame)
    , m_xWidget(m_xBuilder->weld_combo_box(u"gluetype"_ustr))
{
    InitControlBase(m_xWidget.get());

    Fill();

    m_xWidget->connect_changed(LINK(this, GlueEscDirLB, SelectHdl));
    m_xWidget->connect_key_press(LINK(this, GlueEscDirLB, KeyInputHdl));

    SetSizePixel(m_xWidget->get_preferred_size());

    Show();
}

void GlueEscDirLB::dispose()
{
    m_xWidget.reset();
    InterimItemWindow::dispose();
}

GlueEscDirLB::~GlueEscDirLB()
{
    disposeOnce();
}

void GlueEscDirLB::set_sensitive(bool bSensitive)
{
    Enable(bSensitive);
    m_xWidget->set_sensitive(bSensitive);
}

IMPL_LINK(GlueEscDirLB, KeyInputHdl, const KeyEvent&, rKEvt, bool)
{
    return ChildKeyInput(rKEvt);
}

/**
 * Determines the escape direction and sends the corresponding slot
 */

IMPL_LINK(GlueEscDirLB, SelectHdl, weld::ComboBox&, rBox, void)
{
    sal_Int32 nPos = rBox.get_active();
    SfxUInt16Item aItem( SID_GLUE_ESCDIR, static_cast<sal_uInt16>(aEscDirArray[ nPos ]) );

    if ( m_xFrame.is() )
    {
        Any a;
        aItem.QueryValue( a );
        Sequence< PropertyValue > aArgs{ comphelper::makePropertyValue(u"GlueEscapeDirection"_ustr, a) };
        SfxToolBoxControl::Dispatch( Reference< XDispatchProvider >( m_xFrame->getController(), UNO_QUERY ),
                                    u".uno:GlueEscapeDirection"_ustr,
                                    aArgs );
    }
}

/**
 * Fills the Listbox with strings
 */

void GlueEscDirLB::Fill()
{
    m_xWidget->append_text( SdResId( STR_GLUE_ESCDIR_SMART ) );
    m_xWidget->append_text( SdResId( STR_GLUE_ESCDIR_LEFT ) );
    m_xWidget->append_text( SdResId( STR_GLUE_ESCDIR_RIGHT ) );
    m_xWidget->append_text( SdResId( STR_GLUE_ESCDIR_TOP ) );
    m_xWidget->append_text( SdResId( STR_GLUE_ESCDIR_BOTTOM ) );
    /*
    m_xWidget->append_text( SdResId( STR_GLUE_ESCDIR_LO ) );
    m_xWidget->append_text( SdResId( STR_GLUE_ESCDIR_LU ) );
    m_xWidget->append_text( SdResId( STR_GLUE_ESCDIR_RO ) );
    m_xWidget->append_text( SdResId( STR_GLUE_ESCDIR_RU ) );
    m_xWidget->append_text( SdResId( STR_GLUE_ESCDIR_HORZ ) );
    m_xWidget->append_text( SdResId( STR_GLUE_ESCDIR_VERT ) );
    m_xWidget->append_text( SdResId( STR_GLUE_ESCDIR_ALL ) );
    */

}

/**
 * Constructor for gluepoint escape direction toolbox control
 */

SdTbxCtlGlueEscDir::SdTbxCtlGlueEscDir(
    sal_uInt16 nSlotId, ToolBoxItemId nId, ToolBox& rTbx ) :
        SfxToolBoxControl( nSlotId, nId, rTbx )
{
}

/**
 * Represents state in the listbox of the controller
 */

void SdTbxCtlGlueEscDir::StateChangedAtToolBoxControl( sal_uInt16 nSId,
                        SfxItemState eState, const SfxPoolItem* pState )
{
    if( eState == SfxItemState::DEFAULT )
    {
        GlueEscDirLB* pGlueEscDirLB = static_cast<GlueEscDirLB*> ( GetToolBox().
                                            GetItemWindow( GetId() ) );
        if( pGlueEscDirLB )
        {
            if( pState )
            {
                pGlueEscDirLB->set_sensitive(true);
                if ( IsInvalidItem( pState ) )
                {
                    pGlueEscDirLB->set_active(-1);
                }
                else
                {
                    SdrEscapeDirection nEscDir = static_cast<SdrEscapeDirection>(static_cast<const SfxUInt16Item*>( pState )->GetValue());
                    pGlueEscDirLB->set_active( GetEscDirPos( nEscDir ) );
                }
            }
            else
            {
                pGlueEscDirLB->set_sensitive(false);
                pGlueEscDirLB->set_active(-1);
            }
        }
    }

    SfxToolBoxControl::StateChangedAtToolBoxControl( nSId, eState, pState );
}

VclPtr<InterimItemWindow> SdTbxCtlGlueEscDir::CreateItemWindow( vcl::Window *pParent )
{
    if( GetSlotId() == SID_GLUE_ESCDIR )
        return VclPtr<GlueEscDirLB>::Create( pParent, m_xFrame ).get();

    return VclPtr<InterimItemWindow>();
}

/**
 * Returns position in the array for EscDir (Mapping for Listbox)
 */

sal_uInt16 SdTbxCtlGlueEscDir::GetEscDirPos( SdrEscapeDirection nEscDir )
{
    for( sal_uInt16 i = 0; i < ESCDIR_COUNT; i++ )
    {
        if( aEscDirArray[ i ] == nEscDir )
            return i;
    }
    return 99;
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */

Messung V0.5
C=96 H=100 G=97

¤ Dauer der Verarbeitung: 0.0 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.