Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/LibreOffice/sd/source/ui/dlg/   (Office von Apache Version 25.8.3.2©)  Datei vom 5.10.2025 mit Größe 16 kB image not shown  

Quelle  present.cxx   Sprache: C

 
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */


#include <officecfg/Office/Impress.hxx>
#include <officecfg/Office/Security.hxx>
#include <svl/itemset.hxx>
#include <svl/intitem.hxx>
#include <svl/eitem.hxx>
#include <svl/stritem.hxx>
#include <vcl/svapp.hxx>

#include <sdattr.hrc>
#include <present.hxx>
#include <cusshow.hxx>
#include <customshowlist.hxx>

using namespace ::com::sun::star::uno;

namespace
{
enum PresenterConsoleMode
{
    FullScreen = 0,
    Windowed = 1,
    Disabled = 2
};
}

SdStartPresentationDlg::SdStartPresentationDlg(weld::Window* pWindow, const SfxItemSet& rInAttrs,
                                  const std::vector<OUString> &rPageNames, SdCustomShowList* pCSList)
    : GenericDialogController(pWindow, u"modules/simpress/ui/presentationdialog.ui"_ustr, u"PresentationDialog"_ustr)
    , pCustomShowList(pCSList)
    , rOutAttrs(rInAttrs)
    , mnMonitors(0)
    , m_xRbtAll(m_xBuilder->weld_radio_button(u"allslides"_ustr))
    , m_xRbtAtDia(m_xBuilder->weld_radio_button(u"from"_ustr))
    , m_xRbtCustomshow(m_xBuilder->weld_radio_button(u"customslideshow"_ustr))
    , m_xLbDias(m_xBuilder->weld_combo_box(u"from_cb"_ustr))
    , m_xLbCustomshow(m_xBuilder->weld_combo_box(u"customslideshow_cb"_ustr))
    , m_xRbtStandard(m_xBuilder->weld_radio_button(u"default"_ustr))
    , m_xRbtWindow(m_xBuilder->weld_radio_button(u"window"_ustr))
    , m_xCbxAuto(m_xBuilder->weld_check_button(u"auto"_ustr))
    , m_xTmfPause(m_xBuilder->weld_formatted_spin_button(u"pauseduration"_ustr))
    , m_xFormatter(new weld::TimeFormatter(*m_xTmfPause))
    , m_xCbxAutoLogo(m_xBuilder->weld_check_button(u"showlogo"_ustr))
    , m_xCbxManuel(m_xBuilder->weld_check_button(u"manualslides"_ustr))
    , m_xCbxMousepointer(m_xBuilder->weld_check_button(u"pointervisible"_ustr))
    , m_xCbxPen(m_xBuilder->weld_check_button(u"pointeraspen"_ustr))
    , m_xCbxAnimationAllowed(m_xBuilder->weld_check_button(u"animationsallowed"_ustr))
    , m_xCbxChangePage(m_xBuilder->weld_check_button(u"changeslidesbyclick"_ustr))
    , m_xCbxAlwaysOnTop(m_xBuilder->weld_check_button(u"alwaysontop"_ustr))
    , m_xCbxShowNavigationButton(m_xBuilder->weld_check_button(u"shownavigationbutton"_ustr))
    , m_xLbNavigationButtonsSize(m_xBuilder->weld_combo_box(u"navigation_buttons_size_cb"_ustr))
    , m_xFtNavigationButtonsSize(m_xBuilder->weld_label(u"navbar_btn_size_label"_ustr))
    , m_xFrameEnableRemote(m_xBuilder->weld_frame(u"frameremote"_ustr))
    , m_xCbxEnableRemote(m_xBuilder->weld_check_button(u"enableremote"_ustr))
    , m_xCbxEnableRemoteInsecure(m_xBuilder->weld_check_button(u"enableremoteinsecure"_ustr))
    , m_xCbxInteractiveMode(m_xBuilder->weld_check_button(u"enableinteractivemode"_ustr))
    , m_xLbConsole(m_xBuilder->weld_combo_box(u"console_cb"_ustr))
    , m_xFtMonitor(m_xBuilder->weld_label(u"presdisplay_label"_ustr))
    , m_xLBMonitor(m_xBuilder->weld_combo_box(u"presdisplay_cb"_ustr))
    , m_xMonitor(m_xBuilder->weld_label(u"monitor_str"_ustr))
    , m_xAllMonitors(m_xBuilder->weld_label(u"allmonitors_str"_ustr))
    , m_xMonitorExternal(m_xBuilder->weld_label(u"externalmonitor_str"_ustr))
    , m_xExternal(m_xBuilder->weld_label(u"external_str"_ustr))
{
    m_xFormatter->SetExtFormat(ExtTimeFieldFormat::LongDuration);
    m_xFormatter->EnableEmptyField(false);

    Link<weld::Toggleable&,void> aLink( LINK( this, SdStartPresentationDlg, ChangeRangeHdl ) );

    m_xRbtAll->connect_toggled( aLink );
    m_xRbtAtDia->connect_toggled( aLink );
    m_xRbtCustomshow->connect_toggled( aLink );

    aLink = LINK( this, SdStartPresentationDlg, ClickWindowPresentationHdl );
    m_xRbtStandard->connect_toggled( aLink );
    m_xRbtWindow->connect_toggled( aLink );
    m_xCbxAuto->connect_toggled( aLink );
    m_xCbxShowNavigationButton->connect_toggled( aLink );

    m_xTmfPause->connect_value_changed( LINK( this, SdStartPresentationDlg, ChangePauseHdl ) );

    // fill Listbox with page names
    for (const auto& rPageName : rPageNames)
        m_xLbDias->append_text(rPageName);

    if( pCustomShowList )
    {
        sal_uInt16 nPosToSelect = pCustomShowList->GetCurPos();
        SdCustomShow* pCustomShow;
        // fill Listbox with CustomShows
        for( pCustomShow = pCustomShowList->First();
             pCustomShow != nullptr;
             pCustomShow = pCustomShowList->Next() )
        {
            m_xLbCustomshow->append_text( pCustomShow->GetName() );
        }
        m_xLbCustomshow->set_active( nPosToSelect );
        pCustomShowList->Seek( nPosToSelect );
    }
    else
        m_xRbtCustomshow->set_sensitive(false);

    ifstatic_cast<const SfxBoolItem&>( rOutAttrs.Get( ATTR_PRESENT_CUSTOMSHOW ) ).GetValue() && pCSList )
        m_xRbtCustomshow->set_active(true);
    else ifstatic_cast<const SfxBoolItem&>( rOutAttrs.Get( ATTR_PRESENT_ALL ) ).GetValue() )
        m_xRbtAll->set_active(true);
    else
        m_xRbtAtDia->set_active(true);

    m_xLbDias->set_active_text( rOutAttrs.Get( ATTR_PRESENT_DIANAME ).GetValue() );
    m_xCbxManuel->set_active( static_cast<const SfxBoolItem&>( rOutAttrs.Get( ATTR_PRESENT_MANUEL ) ).GetValue() );
    m_xCbxMousepointer->set_active( static_cast<const SfxBoolItem&>( rOutAttrs.Get( ATTR_PRESENT_MOUSE ) ).GetValue() );
    m_xCbxPen->set_active( static_cast<const SfxBoolItem&>( rOutAttrs.Get( ATTR_PRESENT_PEN ) ).GetValue() );
    m_xCbxAnimationAllowed->set_active( static_cast<const SfxBoolItem&>( rOutAttrs.Get( ATTR_PRESENT_ANIMATION_ALLOWED ) ).GetValue() );
    m_xCbxChangePage->set_active( static_cast<const SfxBoolItem&>( rOutAttrs.Get( ATTR_PRESENT_CHANGE_PAGE ) ).GetValue() );
    m_xCbxAlwaysOnTop->set_active( static_cast<const SfxBoolItem&>( rOutAttrs.Get( ATTR_PRESENT_ALWAYS_ON_TOP ) ).GetValue() );

    const sal_Int32 nActiveNavigationBtnScale = officecfg::Office::Impress::Layout::Display::NavigationBtnScale::get();
    const bool bShowNavbar = officecfg::Office::Impress::Misc::Start::ShowNavigationPanel::get();
    m_xCbxShowNavigationButton->set_active( bShowNavbar );
    if (nActiveNavigationBtnScale != -1)
    {
        m_xLbNavigationButtonsSize->set_active(nActiveNavigationBtnScale);
    }
    m_xLbNavigationButtonsSize->set_sensitive( bShowNavbar );
    m_xFtNavigationButtonsSize->set_sensitive( bShowNavbar );

    const bool  bEndless = static_cast<const SfxBoolItem&>( rOutAttrs.Get( ATTR_PRESENT_ENDLESS ) ).GetValue();
    const bool  bWindow = !static_cast<const SfxBoolItem&>( rOutAttrs.Get( ATTR_PRESENT_FULLSCREEN ) ).GetValue();
    const tools::Long  nPause = rOutAttrs.Get( ATTR_PRESENT_PAUSE_TIMEOUT ).GetValue();

    m_xFormatter->SetTime( tools::Time( 0, 0, nPause ) );
    // set cursor in timefield to end
    m_xTmfPause->set_position(-1);

    m_xCbxAutoLogo->set_active( static_cast<const SfxBoolItem&>( rOutAttrs.Get( ATTR_PRESENT_SHOW_PAUSELOGO ) ).GetValue() );

    if( bWindow )
        m_xRbtWindow->set_active(true);
    else
        m_xRbtStandard->set_active(true);

    if( bEndless )
        m_xCbxAuto->set_active(true);

    if (!officecfg::Office::Impress::Misc::Start::EnablePresenterScreen::get())
        m_xLbConsole->set_active(PresenterConsoleMode::Disabled);
    else if (officecfg::Office::Impress::Misc::Start::PresenterScreenFullScreen::get())
        m_xLbConsole->set_active(PresenterConsoleMode::FullScreen);
    else
        m_xLbConsole->set_active(PresenterConsoleMode::Windowed);

#ifdef ENABLE_SDREMOTE
    m_xCbxEnableRemote->connect_toggled( LINK(this, SdStartPresentationDlg, ChangeRemoteHdl) );
    m_xCbxEnableRemote->set_active(officecfg::Office::Impress::Misc::Start::EnableSdremote::get());
    ChangeRemoteHdl(*m_xCbxEnableRemote);
    m_xCbxEnableRemoteInsecure->set_active(m_xCbxEnableRemote->get_active()
        && officecfg::Office::Security::Net::AllowInsecureImpressRemoteWiFi::get());
#else
    m_xFrameEnableRemote->hide();
#endif

    m_xCbxInteractiveMode->set_active( static_cast<const SfxBoolItem&>( rOutAttrs.Get( ATTR_PRESENT_INTERACTIVE ) ).GetValue() );

    InitMonitorSettings();

    ChangeRangeHdl(*m_xRbtCustomshow);

    ClickWindowPresentationHdl(*m_xRbtStandard);
    ChangePause();
}

SdStartPresentationDlg::~SdStartPresentationDlg()
{
}

short SdStartPresentationDlg::run()
{
    short nRet = GenericDialogController::run();
    if (nRet == RET_OK)
    {
        std::shared_ptr<comphelper::ConfigurationChanges> batch(
            comphelper::ConfigurationChanges::create());
        auto nActive = m_xLbConsole->get_active();
        bool bEnabled = nActive != PresenterConsoleMode::Disabled;
        officecfg::Office::Impress::Misc::Start::EnablePresenterScreen::set(bEnabled, batch);
        if (bEnabled)
        {
            officecfg::Office::Impress::Misc::Start::PresenterScreenFullScreen::set(
                nActive == PresenterConsoleMode::FullScreen, batch);
        }
        officecfg::Office::Impress::Misc::Start::ShowNavigationPanel::set(
            m_xCbxShowNavigationButton->get_active(), batch);
        officecfg::Office::Impress::Layout::Display::NavigationBtnScale::set(
            m_xLbNavigationButtonsSize->get_active(), batch);

#ifdef ENABLE_SDREMOTE
        officecfg::Office::Impress::Misc::Start::EnableSdremote::set(m_xCbxEnableRemote->get_active(), batch);
        officecfg::Office::Security::Net::AllowInsecureImpressRemoteWiFi::set(m_xCbxEnableRemoteInsecure->get_active(), batch);
#endif
        batch->commit();
    }
    return nRet;
}

OUString SdStartPresentationDlg::GetDisplayName( sal_Int32   nDisplay,
                                                 DisplayType eType )
{
    OUString aName;

    switch ( eType )
    {
    case EXTERNAL_IS_NUMBER:
        aName = m_xExternal->get_label();
        break;
    case MONITOR_IS_EXTERNAL:
        aName = m_xMonitorExternal->get_label();
        break;
    default:
    case MONITOR_NORMAL:
        aName = m_xMonitor->get_label();
        break;
    }
    aName = aName.replaceFirst( "%1", OUString::number( nDisplay ) );

    return aName;
}

/// Store display index together with name in user data
sal_Int32 SdStartPresentationDlg::InsertDisplayEntry(const OUString &aName,
                                                     sal_Int32            nDisplay)
{
    m_xLBMonitor->append(OUString::number(nDisplay), aName);
    return m_xLBMonitor->get_count() - 1;
}

void SdStartPresentationDlg::InitMonitorSettings()
{
    try
    {
        m_xFtMonitor->show();
        m_xLBMonitor->show();

        mnMonitors = Application::GetScreenCount();

        if( mnMonitors <= 1 )
        {
            m_xFtMonitor->set_sensitive( false );
            m_xLBMonitor->set_sensitive( false );
        }
        else
        {
            sal_Int32 nExternalIndex = Application::GetDisplayExternalScreen();

            sal_Int32 nSelectedIndex (-1);
            sal_Int32 nDefaultExternalIndex (-1);
            const sal_Int32 nDefaultSelectedDisplay (
                rOutAttrs.Get( ATTR_PRESENT_DISPLAY ).GetValue());

            // Un-conditionally add a version for '0' the default external display
            sal_Int32 nInsertedEntry;

            // Initial entry - the auto-detected external monitor
            OUString aName = GetDisplayName( nExternalIndex + 1, EXTERNAL_IS_NUMBER);
            nInsertedEntry = InsertDisplayEntry( aName, 0 );
            if( nDefaultSelectedDisplay == 0)
                nSelectedIndex = nInsertedEntry;

            // The user data contains the real setting
            for( sal_Int32 nDisplay = 0; nDisplay < mnMonitors; nDisplay++ )
            {
                aName = GetDisplayName( nDisplay + 1,
                                        nDisplay == nExternalIndex ?
                                        MONITOR_IS_EXTERNAL : MONITOR_NORMAL );
                nInsertedEntry = InsertDisplayEntry( aName, nDisplay + 1 );

                // Remember the index of the default selection.
                if( nDisplay + 1 == nDefaultSelectedDisplay )
                    nSelectedIndex = nInsertedEntry;

                // Remember index of the default display.
                if( nDisplay == nExternalIndex )
                    nDefaultExternalIndex = nInsertedEntry;
            }

            nInsertedEntry = InsertDisplayEntry( m_xAllMonitors->get_label(), -1 );
            if( nDefaultSelectedDisplay == -1 )
                nSelectedIndex = nInsertedEntry;

            if (nSelectedIndex < 0)
            {
                if (nExternalIndex < 0)
                    nSelectedIndex = 0;
                else
                    nSelectedIndex = nDefaultExternalIndex;
            }

            m_xLBMonitor->set_active(nSelectedIndex);
        }
    }
    catch( Exception& )
    {
    }
}

/**
 * sets the selected attributes of the dialog
 */

void SdStartPresentationDlg::GetAttr( SfxItemSet& rAttr )
{
    rAttr.Put( SfxBoolItem ( ATTR_PRESENT_ALL, m_xRbtAll->get_active() ) );
    rAttr.Put( SfxBoolItem ( ATTR_PRESENT_CUSTOMSHOW, m_xRbtCustomshow->get_active() ) );
    rAttr.Put( SfxStringItem ( ATTR_PRESENT_DIANAME, m_xLbDias->get_active_text() ) );
    rAttr.Put( SfxBoolItem ( ATTR_PRESENT_MANUEL, m_xCbxManuel->get_active() ) );
    rAttr.Put( SfxBoolItem ( ATTR_PRESENT_MOUSE, m_xCbxMousepointer->get_active() ) );
    rAttr.Put( SfxBoolItem ( ATTR_PRESENT_PEN, m_xCbxPen->get_active() ) );
    rAttr.Put( SfxBoolItem ( ATTR_PRESENT_ANIMATION_ALLOWED, m_xCbxAnimationAllowed->get_active() ) );
    rAttr.Put( SfxBoolItem ( ATTR_PRESENT_CHANGE_PAGE, m_xCbxChangePage->get_active() ) );
    rAttr.Put( SfxBoolItem ( ATTR_PRESENT_ALWAYS_ON_TOP, m_xCbxAlwaysOnTop->get_active() ) );
    rAttr.Put( SfxBoolItem ( ATTR_PRESENT_FULLSCREEN, !m_xRbtWindow->get_active() ) );
    rAttr.Put( SfxBoolItem ( ATTR_PRESENT_ENDLESS, m_xCbxAuto->get_active() ) );
    rAttr.Put( SfxUInt32Item ( ATTR_PRESENT_PAUSE_TIMEOUT, m_xFormatter->GetTime().GetMSFromTime() / 1000 ) );
    rAttr.Put( SfxBoolItem ( ATTR_PRESENT_SHOW_PAUSELOGO, m_xCbxAutoLogo->get_active() ) );
    rAttr.Put( SfxBoolItem ( ATTR_PRESENT_INTERACTIVE, m_xCbxInteractiveMode->get_active() ) );

    int nPos = m_xLBMonitor->get_active();
    if (nPos != -1)
        rAttr.Put(SfxInt32Item(ATTR_PRESENT_DISPLAY, m_xLBMonitor->get_id(nPos).toInt32()));

    nPos = m_xLbCustomshow->get_active();
    if (nPos != -1)
        pCustomShowList->Seek( nPos );
}

IMPL_LINK_NOARG(SdStartPresentationDlg, ChangeRemoteHdl, weld::Toggleable&, void)
{
    m_xCbxEnableRemoteInsecure->set_sensitive(m_xCbxEnableRemote->get_active());
}

/**
 *      Handler: Enabled/Disabled Listbox "Dias"
 */

IMPL_LINK_NOARG(SdStartPresentationDlg, ChangeRangeHdl, weld::Toggleable&, void)
{
    m_xLbDias->set_sensitive( m_xRbtAtDia->get_active() );
    m_xLbCustomshow->set_sensitive( m_xRbtCustomshow->get_active() );
}

/**
 *      Handler: Enabled/Disabled Checkbox "AlwaysOnTop"
 */

IMPL_LINK_NOARG(SdStartPresentationDlg, ClickWindowPresentationHdl, weld::Toggleable&, void)
{
    const bool bAuto = m_xCbxAuto->get_active();
    const bool bWindow = m_xRbtWindow->get_active();

    m_xTmfPause->set_sensitive( bAuto );
    m_xCbxAutoLogo->set_sensitive( bAuto && ( m_xFormatter->GetTime().GetMSFromTime() > 0 ) );

    const bool bDisplay = !bWindow && ( mnMonitors > 1 );
    m_xFtMonitor->set_sensitive( bDisplay );
    m_xLBMonitor->set_sensitive( bDisplay );

    const bool bShowNavbar = m_xCbxShowNavigationButton->get_active();
    m_xLbNavigationButtonsSize->set_sensitive( bShowNavbar );
    m_xFtNavigationButtonsSize->set_sensitive( bShowNavbar );

    if( bWindow )
    {
        m_xCbxAlwaysOnTop->set_sensitive(false);
        m_xCbxAlwaysOnTop->set_active(false);
    }
    else
        m_xCbxAlwaysOnTop->set_sensitive(true);
}

/**
 *      Handler: Enabled/Disabled Checkbox "AlwaysOnTop"
 */

IMPL_LINK_NOARG(SdStartPresentationDlg, ChangePauseHdl, weld::FormattedSpinButton&,&nbsp;void)
{
    ChangePause();
}

void SdStartPresentationDlg::ChangePause()
{
    m_xCbxAutoLogo->set_sensitive(m_xCbxAuto->get_active() && ( m_xFormatter->GetTime().GetMSFromTime() > 0 ));
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */

Messung V0.5
C=96 H=96 G=95

¤ Dauer der Verarbeitung: 0.6 Sekunden  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.