Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/Documentation/crypto/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 14 kB image not shown  

Quellcode-Bibliothek mod_host.c   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-1.0+
/*
 * Renesas USB driver
 *
 * Copyright (C) 2011 Renesas Solutions Corp.
 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 */

#include <linux/io.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include "common.h"

/*
 *** HARDWARE LIMITATION ***
 *
 * 1) renesas_usbhs has a limited number of controllable devices.
 *    it can control only 9 devices in generally.
 * see DEVADDn / DCPMAXP / PIPEMAXP.
 *
 * 2) renesas_usbhs pipe number is limited.
 *    the pipe will be re-used for each devices.
 *    so, software should control DATA0/1 sequence of each devices.
 */



/*
 * image of mod_host
 *
 * +--------+
 * | udev 0 | --> it is used when set address
 * +--------+
 *
 * +--------+ pipes are reused for each uep.
 * | udev 1 |-+- [uep 0 (dcp) ] --+ pipe will be switched when
 * +--------+ |   | other device requested
 *       +- [uep 1 (bulk)] --|---+    +--------------+
 *       |   +--------------> | pipe0 (dcp)  |
 *       +- [uep 2 (bulk)] -@    |    +--------------+
 *       |    | pipe1 (isoc) |
 * +--------+       |    +--------------+
 * | udev 2 |-+- [uep 0 (dcp) ] -@    +----------> | pipe2 (bulk) |
 * +--------+ |    +--------------+
 *       +- [uep 1 (int) ] ----+   +------> | pipe3 (bulk) |
 *     |   |    +--------------+
 * +--------+     +-----|------> | pipe4 (int)  |
 * | udev 3 |-+- [uep 0 (dcp) ] -@   |    +--------------+
 * +--------+ |   |    | ....   |
 *       +- [uep 1 (bulk)] -@   |    | ....   |
 *       |   |
 *       +- [uep 2 (bulk)]-----------+
 *
 * @ : uep requested free pipe, but all have been used.
 * now it is waiting for free pipe
 */



/*
 * struct
 */

struct usbhsh_request {
 struct urb  *urb;
 struct usbhs_pkt pkt;
};

struct usbhsh_device {
 struct usb_device *usbv;
 struct list_head ep_list_head; /* list of usbhsh_ep */
};

struct usbhsh_ep {
 struct usbhs_pipe *pipe;   /* attached pipe */
 struct usbhsh_device *udev;   /* attached udev */
 struct usb_host_endpoint *ep;
 struct list_head ep_list; /* list to usbhsh_device */
 unsigned int  counter; /* pipe attach counter */
};

#define USBHSH_DEVICE_MAX 10 /* see DEVADDn / DCPMAXP / PIPEMAXP */
#define USBHSH_PORT_MAX   7 /* see DEVADDn :: HUBPORT */
struct usbhsh_hpriv {
 struct usbhs_mod mod;
 struct usbhs_pipe *dcp;

 struct usbhsh_device udev[USBHSH_DEVICE_MAX];

 u32 port_stat; /* USB_PORT_STAT_xxx */

 struct completion setup_ack_done;
};


static const char usbhsh_hcd_name[] = "renesas_usbhs host";

/*
 * macro
 */

#define usbhsh_priv_to_hpriv(priv) \
 container_of(usbhs_mod_get(priv, USBHS_HOST), struct usbhsh_hpriv, mod)

#define __usbhsh_for_each_udev(start, pos, h, i) \
 for ((i) = start;      \
      ((i) < USBHSH_DEVICE_MAX) && ((pos) = (h)->udev + (i)); \
      (i)++)

#define usbhsh_for_each_udev(pos, hpriv, i) \
 __usbhsh_for_each_udev(1, pos, hpriv, i)

#define usbhsh_for_each_udev_with_dev0(pos, hpriv, i) \
 __usbhsh_for_each_udev(0, pos, hpriv, i)

#define usbhsh_hcd_to_hpriv(h) (struct usbhsh_hpriv *)((h)->hcd_priv)
#define usbhsh_hcd_to_dev(h) ((h)->self.controller)

#define usbhsh_hpriv_to_priv(h) ((h)->mod.priv)
#define usbhsh_hpriv_to_dcp(h) ((h)->dcp)
#define usbhsh_hpriv_to_hcd(h) \
 container_of((void *)h, struct usb_hcd, hcd_priv)

#define usbhsh_ep_to_uep(u) ((u)->hcpriv)
#define usbhsh_uep_to_pipe(u) ((u)->pipe)
#define usbhsh_uep_to_udev(u) ((u)->udev)
#define usbhsh_uep_to_ep(u) ((u)->ep)

#define usbhsh_urb_to_ureq(u) ((u)->hcpriv)
#define usbhsh_urb_to_usbv(u) ((u)->dev)

#define usbhsh_usbv_to_udev(d) dev_get_drvdata(&(d)->dev)

#define usbhsh_udev_to_usbv(h) ((h)->usbv)
#define usbhsh_udev_is_used(h) usbhsh_udev_to_usbv(h)

#define usbhsh_pipe_to_uep(p) ((p)->mod_private)

#define usbhsh_device_parent(d)  (usbhsh_usbv_to_udev((d)->usbv->parent))
#define usbhsh_device_hubport(d) ((d)->usbv->portnum)
#define usbhsh_device_number(h, d) ((int)((d) - (h)->udev))
#define usbhsh_device_nth(h, d)  ((h)->udev + d)
#define usbhsh_device0(h)  usbhsh_device_nth(h, 0)

#define usbhsh_port_stat_init(h) ((h)->port_stat = 0)
#define usbhsh_port_stat_set(h, s) ((h)->port_stat |= (s))
#define usbhsh_port_stat_clear(h, s) ((h)->port_stat &= ~(s))
#define usbhsh_port_stat_get(h)  ((h)->port_stat)

#define usbhsh_pkt_to_ureq(p) \
 container_of((void *)p, struct usbhsh_request, pkt)

/*
 * req alloc/free
 */

static struct usbhsh_request *usbhsh_ureq_alloc(struct usbhsh_hpriv *hpriv,
            struct urb *urb,
            gfp_t mem_flags)
{
 struct usbhsh_request *ureq;

 ureq = kzalloc(sizeof(struct usbhsh_request), mem_flags);
 if (!ureq)
  return NULL;

 usbhs_pkt_init(&ureq->pkt);
 ureq->urb = urb;
 usbhsh_urb_to_ureq(urb) = ureq;

 return ureq;
}

static void usbhsh_ureq_free(struct usbhsh_hpriv *hpriv,
       struct usbhsh_request *ureq)
{
 usbhsh_urb_to_ureq(ureq->urb) = NULL;
 ureq->urb = NULL;

 kfree(ureq);
}

/*
 * status
 */

static int usbhsh_is_running(struct usbhsh_hpriv *hpriv)
{
 /*
 * we can decide some device is attached or not
 * by checking mod.irq_attch
 * see
 * usbhsh_irq_attch()
 * usbhsh_irq_dtch()
 */

 return (hpriv->mod.irq_attch == NULL);
}

/*
 * pipe control
 */

static void usbhsh_endpoint_sequence_save(struct usbhsh_hpriv *hpriv,
       struct urb *urb,
       struct usbhs_pkt *pkt)
{
 int len = urb->actual_length;
 int maxp = usb_endpoint_maxp(&urb->ep->desc);
 int t = 0;

 /* DCP is out of sequence control */
 if (usb_pipecontrol(urb->pipe))
  return;

 /*
 * renesas_usbhs pipe has a limitation in a number.
 * So, driver should re-use the limited pipe for each device/endpoint.
 * DATA0/1 sequence should be saved for it.
 * see [image of mod_host]
 *     [HARDWARE LIMITATION]
 */


 /*
 * next sequence depends on actual_length
 *
 * ex) actual_length = 1147, maxp = 512
 * data0 : 512
 * data1 : 512
 * data0 : 123
 * data1 is the next sequence
 */

 t = len / maxp;
 if (len % maxp)
  t++;
 if (pkt->zero)
  t++;
 t %= 2;

 if (t)
  usb_dotoggle(urb->dev,
        usb_pipeendpoint(urb->pipe),
        usb_pipeout(urb->pipe));
}

static struct usbhsh_device *usbhsh_device_get(struct usbhsh_hpriv *hpriv,
            struct urb *urb);

static int usbhsh_pipe_attach(struct usbhsh_hpriv *hpriv,
         struct urb *urb)
{
 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
 struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
 struct usbhsh_device *udev = usbhsh_device_get(hpriv, urb);
 struct usbhs_pipe *pipe;
 struct usb_endpoint_descriptor *desc = &urb->ep->desc;
 struct device *dev = usbhs_priv_to_dev(priv);
 unsigned long flags;
 int dir_in_req = !!usb_pipein(urb->pipe);
 int is_dcp = usb_endpoint_xfer_control(desc);
 int i, dir_in;
 int ret = -EBUSY;

 /********************  spin lock ********************/
 usbhs_lock(priv, flags);

 /*
 * if uep has been attached to pipe,
 * reuse it
 */

 if (usbhsh_uep_to_pipe(uep)) {
  ret = 0;
  goto usbhsh_pipe_attach_done;
 }

 usbhs_for_each_pipe_with_dcp(pipe, priv, i) {

  /* check pipe type */
  if (!usbhs_pipe_type_is(pipe, usb_endpoint_type(desc)))
   continue;

  /* check pipe direction if normal pipe */
  if (!is_dcp) {
   dir_in = !!usbhs_pipe_is_dir_in(pipe);
   if (0 != (dir_in - dir_in_req))
    continue;
  }

  /* check pipe is free */
  if (usbhsh_pipe_to_uep(pipe))
   continue;

  /*
 * attach pipe to uep
 *
 * usbhs_pipe_config_update() should be called after
 * usbhs_set_device_config()
 * see
 *  DCPMAXP/PIPEMAXP
 */

  usbhsh_uep_to_pipe(uep)  = pipe;
  usbhsh_pipe_to_uep(pipe) = uep;

  usbhs_pipe_config_update(pipe,
      usbhsh_device_number(hpriv, udev),
      usb_endpoint_num(desc),
      usb_endpoint_maxp(desc));

  dev_dbg(dev, "%s [%d-%d(%s:%s)]\n", __func__,
   usbhsh_device_number(hpriv, udev),
   usb_endpoint_num(desc),
   usbhs_pipe_name(pipe),
   dir_in_req ? "in" : "out");

  ret = 0;
  break;
 }

usbhsh_pipe_attach_done:
 if (0 == ret)
  uep->counter++;

 usbhs_unlock(priv, flags);
 /********************  spin unlock ******************/

 return ret;
}

static void usbhsh_pipe_detach(struct usbhsh_hpriv *hpriv,
          struct usbhsh_ep *uep)
{
 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
 struct usbhs_pipe *pipe;
 struct device *dev = usbhs_priv_to_dev(priv);
 unsigned long flags;

 if (unlikely(!uep)) {
  dev_err(dev, "no uep\n");
  return;
 }

 /********************  spin lock ********************/
 usbhs_lock(priv, flags);

 pipe = usbhsh_uep_to_pipe(uep);

 if (unlikely(!pipe)) {
  dev_err(dev, "uep doesn't have pipe\n");
 } else if (1 == uep->counter--) { /* last user */
  struct usb_host_endpoint *ep = usbhsh_uep_to_ep(uep);
  struct usbhsh_device *udev = usbhsh_uep_to_udev(uep);

  /* detach pipe from uep */
  usbhsh_uep_to_pipe(uep)  = NULL;
  usbhsh_pipe_to_uep(pipe) = NULL;

  dev_dbg(dev, "%s [%d-%d(%s)]\n", __func__,
   usbhsh_device_number(hpriv, udev),
   usb_endpoint_num(&ep->desc),
   usbhs_pipe_name(pipe));
 }

 usbhs_unlock(priv, flags);
 /********************  spin unlock ******************/
}

/*
 * endpoint control
 */

static int usbhsh_endpoint_attach(struct usbhsh_hpriv *hpriv,
      struct urb *urb,
      gfp_t mem_flags)
{
 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
 struct usbhsh_device *udev = usbhsh_device_get(hpriv, urb);
 struct usb_host_endpoint *ep = urb->ep;
 struct usbhsh_ep *uep;
 struct device *dev = usbhs_priv_to_dev(priv);
 struct usb_endpoint_descriptor *desc = &ep->desc;
 unsigned long flags;

 uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags);
 if (!uep)
  return -ENOMEM;

 /********************  spin lock ********************/
 usbhs_lock(priv, flags);

 /*
 * init endpoint
 */

 uep->counter = 0;
 INIT_LIST_HEAD(&uep->ep_list);
 list_add_tail(&uep->ep_list, &udev->ep_list_head);

 usbhsh_uep_to_udev(uep) = udev;
 usbhsh_uep_to_ep(uep) = ep;
 usbhsh_ep_to_uep(ep) = uep;

 usbhs_unlock(priv, flags);
 /********************  spin unlock ******************/

 dev_dbg(dev, "%s [%d-%d]\n", __func__,
  usbhsh_device_number(hpriv, udev),
  usb_endpoint_num(desc));

 return 0;
}

static void usbhsh_endpoint_detach(struct usbhsh_hpriv *hpriv,
       struct usb_host_endpoint *ep)
{
 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
 struct device *dev = usbhs_priv_to_dev(priv);
 struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
 unsigned long flags;

 if (!uep)
  return;

 dev_dbg(dev, "%s [%d-%d]\n", __func__,
  usbhsh_device_number(hpriv, usbhsh_uep_to_udev(uep)),
  usb_endpoint_num(&ep->desc));

 if (usbhsh_uep_to_pipe(uep))
  usbhsh_pipe_detach(hpriv, uep);

 /********************  spin lock ********************/
 usbhs_lock(priv, flags);

 /* remove this endpoint from udev */
 list_del_init(&uep->ep_list);

 usbhsh_uep_to_udev(uep) = NULL;
 usbhsh_uep_to_ep(uep) = NULL;
 usbhsh_ep_to_uep(ep) = NULL;

 usbhs_unlock(priv, flags);
 /********************  spin unlock ******************/

 kfree(uep);
}

static void usbhsh_endpoint_detach_all(struct usbhsh_hpriv *hpriv,
           struct usbhsh_device *udev)
{
 struct usbhsh_ep *uep, *next;

 list_for_each_entry_safe(uep, next, &udev->ep_list_head, ep_list)
  usbhsh_endpoint_detach(hpriv, usbhsh_uep_to_ep(uep));
}

/*
 * device control
 */

static int usbhsh_connected_to_rhdev(struct usb_hcd *hcd,
         struct usbhsh_device *udev)
{
 struct usb_device *usbv = usbhsh_udev_to_usbv(udev);

 return hcd->self.root_hub == usbv->parent;
}

static int usbhsh_device_has_endpoint(struct usbhsh_device *udev)
{
 return !list_empty(&udev->ep_list_head);
}

static struct usbhsh_device *usbhsh_device_get(struct usbhsh_hpriv *hpriv,
            struct urb *urb)
{
 struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
 struct usbhsh_device *udev = usbhsh_usbv_to_udev(usbv);

 /* usbhsh_device_attach() is still not called */
 if (!udev)
  return NULL;

 /* if it is device0, return it */
 if (0 == usb_pipedevice(urb->pipe))
  return usbhsh_device0(hpriv);

 /* return attached device */
 return udev;
}

static struct usbhsh_device *usbhsh_device_attach(struct usbhsh_hpriv *hpriv,
       struct urb *urb)
{
 struct usbhsh_device *udev = NULL;
 struct usbhsh_device *udev0 = usbhsh_device0(hpriv);
 struct usbhsh_device *pos;
 struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
 struct device *dev = usbhsh_hcd_to_dev(hcd);
 struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
 unsigned long flags;
 u16 upphub, hubport;
 int i;

 /*
 * This function should be called only while urb is pointing to device0.
 * It will attach unused usbhsh_device to urb (usbv),
 * and initialize device0.
 * You can use usbhsh_device_get() to get "current" udev,
 * and usbhsh_usbv_to_udev() is for "attached" udev.
 */

 if (0 != usb_pipedevice(urb->pipe)) {
  dev_err(dev, "%s fail: urb isn't pointing device0\n", __func__);
  return NULL;
 }

 /********************  spin lock ********************/
 usbhs_lock(priv, flags);

 /*
 * find unused device
 */

 usbhsh_for_each_udev(pos, hpriv, i) {
  if (usbhsh_udev_is_used(pos))
   continue;
  udev = pos;
  break;
 }

 if (udev) {
  /*
 * usbhsh_usbv_to_udev()
 * usbhsh_udev_to_usbv()
 * will be enable
 */

  dev_set_drvdata(&usbv->dev, udev);
  udev->usbv = usbv;
 }

 usbhs_unlock(priv, flags);
 /********************  spin unlock ******************/

 if (!udev) {
  dev_err(dev, "no free usbhsh_device\n");
  return NULL;
 }

 if (usbhsh_device_has_endpoint(udev)) {
  dev_warn(dev, "udev have old endpoint\n");
  usbhsh_endpoint_detach_all(hpriv, udev);
 }

 if (usbhsh_device_has_endpoint(udev0)) {
  dev_warn(dev, "udev0 have old endpoint\n");
  usbhsh_endpoint_detach_all(hpriv, udev0);
 }

 /* uep will be attached */
 INIT_LIST_HEAD(&udev0->ep_list_head);
 INIT_LIST_HEAD(&udev->ep_list_head);

 /*
 * set device0 config
 */

 usbhs_set_device_config(priv,
    0, 0, 0, usbv->speed);

 /*
 * set new device config
 */

 upphub = 0;
 hubport = 0;
 if (!usbhsh_connected_to_rhdev(hcd, udev)) {
  /* if udev is not connected to rhdev, it means parent is Hub */
  struct usbhsh_device *parent = usbhsh_device_parent(udev);

  upphub = usbhsh_device_number(hpriv, parent);
  hubport = usbhsh_device_hubport(udev);

  dev_dbg(dev, "%s connected to Hub [%d:%d](%p)\n", __func__,
   upphub, hubport, parent);
 }

 usbhs_set_device_config(priv,
          usbhsh_device_number(hpriv, udev),
          upphub, hubport, usbv->speed);

 dev_dbg(dev, "%s [%d](%p)\n", __func__,
  usbhsh_device_number(hpriv, udev), udev);

 return udev;
}

static void usbhsh_device_detach(struct usbhsh_hpriv *hpriv,
          struct usbhsh_device *udev)
{
 struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
 struct device *dev = usbhsh_hcd_to_dev(hcd);
 struct usb_device *usbv = usbhsh_udev_to_usbv(udev);
 unsigned long flags;

 dev_dbg(dev, "%s [%d](%p)\n", __func__,
  usbhsh_device_number(hpriv, udev), udev);

 if (usbhsh_device_has_endpoint(udev)) {
  dev_warn(dev, "udev still have endpoint\n");
  usbhsh_endpoint_detach_all(hpriv, udev);
 }

 /*
 * There is nothing to do if it is device0.
 * see
 *  usbhsh_device_attach()
 *  usbhsh_device_get()
 */

 if (0 == usbhsh_device_number(hpriv, udev))
  return;

 /********************  spin lock ********************/
 usbhs_lock(priv, flags);

 /*
 * usbhsh_usbv_to_udev()
 * usbhsh_udev_to_usbv()
 * will be disable
 */

 dev_set_drvdata(&usbv->dev, NULL);
 udev->usbv = NULL;

 usbhs_unlock(priv, flags);
 /********************  spin unlock ******************/
}

/*
 * queue push/pop
 */

static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
{
 struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
 struct urb *urb = ureq->urb;
 struct device *dev = usbhs_priv_to_dev(priv);
 int status = 0;

 dev_dbg(dev, "%s\n", __func__);

 if (!urb) {
  dev_warn(dev, "pkt doesn't have urb\n");
  return;
 }

 if (!usbhsh_is_running(hpriv))
  status = -ESHUTDOWN;

 urb->actual_length = pkt->actual;

 usbhsh_endpoint_sequence_save(hpriv, urb, pkt);
 usbhsh_ureq_free(hpriv, ureq);

 usbhsh_pipe_detach(hpriv, usbhsh_ep_to_uep(urb->ep));

 usb_hcd_unlink_urb_from_ep(hcd, urb);
 usb_hcd_giveback_urb(hcd, urb, status);
}

static int usbhsh_queue_push(struct usb_hcd *hcd,
        struct urb *urb,
        gfp_t mem_flags)
{
 struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
 struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
 struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep);
 struct device *dev = usbhsh_hcd_to_dev(hcd);
 struct usbhsh_request *ureq;
 void *buf;
 int len, sequence;

 if (usb_pipeisoc(urb->pipe)) {
  dev_err(dev, "pipe iso is not supported now\n");
  return -EIO;
 }

 /* this ureq will be freed on usbhsh_queue_done() */
 ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
 if (unlikely(!ureq)) {
  dev_err(dev, "ureq alloc fail\n");
  return -ENOMEM;
 }

 if (usb_pipein(urb->pipe))
  pipe->handler = &usbhs_fifo_dma_pop_handler;
 else
  pipe->handler = &usbhs_fifo_dma_push_handler;

 buf = (void *)(urb->transfer_buffer + urb->actual_length);
 len = urb->transfer_buffer_length - urb->actual_length;

 sequence = usb_gettoggle(urb->dev,
     usb_pipeendpoint(urb->pipe),
     usb_pipeout(urb->pipe));

 dev_dbg(dev, "%s\n", __func__);
 usbhs_pkt_push(pipe, &ureq->pkt, usbhsh_queue_done,
         buf, len, (urb->transfer_flags & URB_ZERO_PACKET),
         sequence);

 usbhs_pkt_start(pipe);

 return 0;
}

static void usbhsh_queue_force_pop(struct usbhs_priv *priv,
       struct usbhs_pipe *pipe)
{
 struct usbhs_pkt *pkt;

 while (1) {
  pkt = usbhs_pkt_pop(pipe, NULL);
  if (!pkt)
   break;

  /*
 * if all packet are gone, usbhsh_endpoint_disable()
 * will be called.
 * then, attached device/endpoint/pipe will be detached
 */

  usbhsh_queue_done(priv, pkt);
 }
}

static void usbhsh_queue_force_pop_all(struct usbhs_priv *priv)
{
 struct usbhs_pipe *pos;
 int i;

 usbhs_for_each_pipe_with_dcp(pos, priv, i)
  usbhsh_queue_force_pop(priv, pos);
}

/*
 * DCP setup stage
 */

static int usbhsh_is_request_address(struct urb *urb)
{
 struct usb_ctrlrequest *req;

 req = (struct usb_ctrlrequest *)urb->setup_packet;

 if ((DeviceOutRequest    == req->bRequestType << 8) &&
     (USB_REQ_SET_ADDRESS == req->bRequest))
  return 1;
 else
  return 0;
}

static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv,
        struct urb *urb,
        struct usbhs_pipe *pipe)
{
 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
 struct usb_ctrlrequest req;
 struct device *dev = usbhs_priv_to_dev(priv);

 /*
 * wait setup packet ACK
 * see
 * usbhsh_irq_setup_ack()
 * usbhsh_irq_setup_err()
 */

 init_completion(&hpriv->setup_ack_done);

 /* copy original request */
 memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest));

 /*
 * renesas_usbhs can not use original usb address.
 * see HARDWARE LIMITATION.
 * modify usb address here to use attached device.
 * see usbhsh_device_attach()
 */

 if (usbhsh_is_request_address(urb)) {
  struct usb_device *usbv = usbhsh_urb_to_usbv(urb);
  struct usbhsh_device *udev = usbhsh_usbv_to_udev(usbv);

  /* udev is a attached device */
  req.wValue = usbhsh_device_number(hpriv, udev);
  dev_dbg(dev, "create new address - %d\n", req.wValue);
 }

 /* set request */
 usbhs_usbreq_set_val(priv, &req);

 /*
 * wait setup packet ACK
 */

 wait_for_completion(&hpriv->setup_ack_done);

 dev_dbg(dev, "%s done\n", __func__);
}

/*
 * DCP data stage
 */

static void usbhsh_data_stage_packet_done(struct usbhs_priv *priv,
       struct usbhs_pkt *pkt)
{
 struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);

 /* this ureq was connected to urb when usbhsh_urb_enqueue()  */

 usbhsh_ureq_free(hpriv, ureq);
}

static int usbhsh_data_stage_packet_push(struct usbhsh_hpriv *hpriv,
      struct urb *urb,
      struct usbhs_pipe *pipe,
      gfp_t mem_flags)

{
 struct usbhsh_request *ureq;

 /* this ureq will be freed on usbhsh_data_stage_packet_done() */
 ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
 if (unlikely(!ureq))
  return -ENOMEM;

 if (usb_pipein(urb->pipe))
  pipe->handler = &usbhs_dcp_data_stage_in_handler;
 else
  pipe->handler = &usbhs_dcp_data_stage_out_handler;

 usbhs_pkt_push(pipe, &ureq->pkt,
         usbhsh_data_stage_packet_done,
         urb->transfer_buffer,
         urb->transfer_buffer_length,
         (urb->transfer_flags & URB_ZERO_PACKET),
         -1);

 return 0;
}

/*
 * DCP status stage
 */

static int usbhsh_status_stage_packet_push(struct usbhsh_hpriv *hpriv,
         struct urb *urb,
         struct usbhs_pipe *pipe,
         gfp_t mem_flags)
{
 struct usbhsh_request *ureq;

 /* This ureq will be freed on usbhsh_queue_done() */
 ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags);
 if (unlikely(!ureq))
  return -ENOMEM;

 if (usb_pipein(urb->pipe))
  pipe->handler = &usbhs_dcp_status_stage_in_handler;
 else
  pipe->handler = &usbhs_dcp_status_stage_out_handler;

 usbhs_pkt_push(pipe, &ureq->pkt,
         usbhsh_queue_done,
         NULL,
         urb->transfer_buffer_length,
         0, -1);

 return 0;
}

static int usbhsh_dcp_queue_push(struct usb_hcd *hcd,
     struct urb *urb,
     gfp_t mflags)
{
 struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
 struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep);
 struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep);
 struct device *dev = usbhsh_hcd_to_dev(hcd);
 int ret;

 dev_dbg(dev, "%s\n", __func__);

 /*
 * setup stage
 *
 * usbhsh_send_setup_stage_packet() wait SACK/SIGN
 */

 usbhsh_setup_stage_packet_push(hpriv, urb, pipe);

 /*
 * data stage
 *
 * It is pushed only when urb has buffer.
 */

 if (urb->transfer_buffer_length) {
  ret = usbhsh_data_stage_packet_push(hpriv, urb, pipe, mflags);
  if (ret < 0) {
   dev_err(dev, "data stage failed\n");
   return ret;
  }
 }

 /*
 * status stage
 */

 ret = usbhsh_status_stage_packet_push(hpriv, urb, pipe, mflags);
 if (ret < 0) {
  dev_err(dev, "status stage failed\n");
  return ret;
 }

 /*
 * start pushed packets
 */

 usbhs_pkt_start(pipe);

 return 0;
}

/*
 * dma map functions
 */

static int usbhsh_dma_map_ctrl(struct device *dma_dev, struct usbhs_pkt *pkt,
          int map)
{
 if (map) {
  struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt);
  struct urb *urb = ureq->urb;

  /* it can not use scatter/gather */
  if (urb->num_sgs)
   return -EINVAL;

  pkt->dma = urb->transfer_dma;
  if (!pkt->dma)
   return -EINVAL;
 }

 return 0;
}

/*
 * for hc_driver
 */

static int usbhsh_host_start(struct usb_hcd *hcd)
{
 return 0;
}

static void usbhsh_host_stop(struct usb_hcd *hcd)
{
}

static int usbhsh_urb_enqueue(struct usb_hcd *hcd,
         struct urb *urb,
         gfp_t mem_flags)
{
 struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
 struct device *dev = usbhs_priv_to_dev(priv);
 struct usb_host_endpoint *ep = urb->ep;
 struct usbhsh_device *new_udev = NULL;
 int is_dir_in = usb_pipein(urb->pipe);
 int ret;

 dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out");

 if (!usbhsh_is_running(hpriv)) {
  ret = -EIO;
  dev_err(dev, "host is not running\n");
  goto usbhsh_urb_enqueue_error_not_linked;
 }

 ret = usb_hcd_link_urb_to_ep(hcd, urb);
 if (ret) {
  dev_err(dev, "urb link failed\n");
  goto usbhsh_urb_enqueue_error_not_linked;
 }

 /*
 * attach udev if needed
 * see [image of mod_host]
 */

 if (!usbhsh_device_get(hpriv, urb)) {
  new_udev = usbhsh_device_attach(hpriv, urb);
  if (!new_udev) {
   ret = -EIO;
   dev_err(dev, "device attach failed\n");
   goto usbhsh_urb_enqueue_error_not_linked;
  }
 }

 /*
 * attach endpoint if needed
 * see [image of mod_host]
 */

 if (!usbhsh_ep_to_uep(ep)) {
  ret = usbhsh_endpoint_attach(hpriv, urb, mem_flags);
  if (ret < 0) {
   dev_err(dev, "endpoint attach failed\n");
   goto usbhsh_urb_enqueue_error_free_device;
  }
 }

 /*
 * attach pipe to endpoint
 * see [image of mod_host]
 */

 ret = usbhsh_pipe_attach(hpriv, urb);
 if (ret < 0) {
  dev_err(dev, "pipe attach failed\n");
  goto usbhsh_urb_enqueue_error_free_endpoint;
 }

 /*
 * push packet
 */

 if (usb_pipecontrol(urb->pipe))
  ret = usbhsh_dcp_queue_push(hcd, urb, mem_flags);
 else
  ret = usbhsh_queue_push(hcd, urb, mem_flags);

 return ret;

usbhsh_urb_enqueue_error_free_endpoint:
 usbhsh_endpoint_detach(hpriv, ep);
usbhsh_urb_enqueue_error_free_device:
 if (new_udev)
  usbhsh_device_detach(hpriv, new_udev);
usbhsh_urb_enqueue_error_not_linked:

 dev_dbg(dev, "%s error\n", __func__);

 return ret;
}

static int usbhsh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
 struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
 struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb);

 if (ureq) {
  struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
  struct usbhs_pkt *pkt = &ureq->pkt;

  usbhs_pkt_pop(pkt->pipe, pkt);
  usbhsh_queue_done(priv, pkt);
 }

 return 0;
}

static void usbhsh_endpoint_disable(struct usb_hcd *hcd,
        struct usb_host_endpoint *ep)
{
 struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep);
 struct usbhsh_device *udev;
 struct usbhsh_hpriv *hpriv;

 /*
 * this function might be called manytimes by same hcd/ep
 * in-endpoint == out-endpoint if ep == dcp.
 */

 if (!uep)
  return;

 udev = usbhsh_uep_to_udev(uep);
 hpriv = usbhsh_hcd_to_hpriv(hcd);

 usbhsh_endpoint_detach(hpriv, ep);

 /*
 * if there is no endpoint,
 * free device
 */

 if (!usbhsh_device_has_endpoint(udev))
  usbhsh_device_detach(hpriv, udev);
}

static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf)
{
 struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
 int roothub_id = 1; /* only 1 root hub */

 /*
 * does port stat was changed ?
 * check USB_PORT_STAT_C_xxx << 16
 */

 if (usbhsh_port_stat_get(hpriv) & 0xFFFF0000)
  *buf = (1 << roothub_id);
 else
  *buf = 0;

 return !!(*buf);
}

static int __usbhsh_hub_hub_feature(struct usbhsh_hpriv *hpriv,
        u16 typeReq, u16 wValue,
        u16 wIndex, char *buf, u16 wLength)
{
 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
 struct device *dev = usbhs_priv_to_dev(priv);

 switch (wValue) {
 case C_HUB_OVER_CURRENT:
 case C_HUB_LOCAL_POWER:
  dev_dbg(dev, "%s :: C_HUB_xx\n", __func__);
  return 0;
 }

 return -EPIPE;
}

static int __usbhsh_hub_port_feature(struct usbhsh_hpriv *hpriv,
         u16 typeReq, u16 wValue,
         u16 wIndex, char *buf, u16 wLength)
{
 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
 struct device *dev = usbhs_priv_to_dev(priv);
 int enable = (typeReq == SetPortFeature);
 int speed, i, timeout = 128;
 int roothub_id = 1; /* only 1 root hub */

 /* common error */
 if (wIndex > roothub_id || wLength != 0)
  return -EPIPE;

 /* check wValue */
 switch (wValue) {
 case USB_PORT_FEAT_POWER:
  usbhs_vbus_ctrl(priv, enable);
  dev_dbg(dev, "%s :: USB_PORT_FEAT_POWER\n", __func__);
  break;

 case USB_PORT_FEAT_ENABLE:
 case USB_PORT_FEAT_SUSPEND:
 case USB_PORT_FEAT_C_ENABLE:
 case USB_PORT_FEAT_C_SUSPEND:
 case USB_PORT_FEAT_C_CONNECTION:
 case USB_PORT_FEAT_C_OVER_CURRENT:
 case USB_PORT_FEAT_C_RESET:
  dev_dbg(dev, "%s :: USB_PORT_FEAT_xxx\n", __func__);
  break;

 case USB_PORT_FEAT_RESET:
  if (!enable)
   break;

  usbhsh_port_stat_clear(hpriv,
           USB_PORT_STAT_HIGH_SPEED |
           USB_PORT_STAT_LOW_SPEED);

  usbhsh_queue_force_pop_all(priv);

  usbhs_bus_send_reset(priv);
  msleep(20);
  usbhs_bus_send_sof_enable(priv);

  for (i = 0; i < timeout ; i++) {
   switch (usbhs_bus_get_speed(priv)) {
   case USB_SPEED_LOW:
    speed = USB_PORT_STAT_LOW_SPEED;
    goto got_usb_bus_speed;
   case USB_SPEED_HIGH:
    speed = USB_PORT_STAT_HIGH_SPEED;
    goto got_usb_bus_speed;
   case USB_SPEED_FULL:
    speed = 0;
    goto got_usb_bus_speed;
   }

   msleep(20);
  }
  return -EPIPE;

got_usb_bus_speed:
  usbhsh_port_stat_set(hpriv, speed);
  usbhsh_port_stat_set(hpriv, USB_PORT_STAT_ENABLE);

  dev_dbg(dev, "%s :: USB_PORT_FEAT_RESET (speed = %d)\n",
   __func__, speed);

  /* status change is not needed */
  return 0;

 default:
  return -EPIPE;
 }

 /* set/clear status */
 if (enable)
  usbhsh_port_stat_set(hpriv, (1 << wValue));
 else
  usbhsh_port_stat_clear(hpriv, (1 << wValue));

 return 0;
}

static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv,
       u16 typeReq, u16 wValue,
       u16 wIndex, char *buf, u16 wLength)
{
 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
 struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
 struct device *dev = usbhs_priv_to_dev(priv);
 int roothub_id = 1; /* only 1 root hub */

 switch (typeReq) {
 case GetHubStatus:
  dev_dbg(dev, "%s :: GetHubStatus\n", __func__);

  *buf = 0x00;
  break;

 case GetPortStatus:
  if (wIndex != roothub_id)
   return -EPIPE;

  dev_dbg(dev, "%s :: GetPortStatus\n", __func__);
  *(__le32 *)buf = cpu_to_le32(usbhsh_port_stat_get(hpriv));
  break;

 case GetHubDescriptor:
  desc->bDescriptorType  = USB_DT_HUB;
  desc->bHubContrCurrent  = 0;
  desc->bNbrPorts   = roothub_id;
  desc->bDescLength  = 9;
  desc->bPwrOn2PwrGood  = 0;
  desc->wHubCharacteristics =
   cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM);
  desc->u.hs.DeviceRemovable[0] = (roothub_id << 1);
  desc->u.hs.DeviceRemovable[1] = ~0;
  dev_dbg(dev, "%s :: GetHubDescriptor\n", __func__);
  break;
 }

 return 0;
}

static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
         u16 wIndex, char *buf, u16 wLength)
{
 struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd);
 struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv);
 struct device *dev = usbhs_priv_to_dev(priv);
 int ret = -EPIPE;

 switch (typeReq) {

 /* Hub Feature */
 case ClearHubFeature:
 case SetHubFeature:
  ret = __usbhsh_hub_hub_feature(hpriv, typeReq,
            wValue, wIndex, buf, wLength);
  break;

 /* Port Feature */
 case SetPortFeature:
 case ClearPortFeature:
  ret = __usbhsh_hub_port_feature(hpriv, typeReq,
      wValue, wIndex, buf, wLength);
  break;

 /* Get status */
 case GetHubStatus:
 case GetPortStatus:
 case GetHubDescriptor:
  ret = __usbhsh_hub_get_status(hpriv, typeReq,
           wValue, wIndex, buf, wLength);
  break;
 }

 dev_dbg(dev, "typeReq = %x, ret = %d, port_stat = %x\n",
  typeReq, ret, usbhsh_port_stat_get(hpriv));

 return ret;
}

static int usbhsh_bus_nop(struct usb_hcd *hcd)
{
 /* nothing to do */
 return 0;
}

static const struct hc_driver usbhsh_driver = {
 .description =  usbhsh_hcd_name,
 .hcd_priv_size = sizeof(struct usbhsh_hpriv),

 /*
 * generic hardware linkage
 */

 .flags =  HCD_DMA | HCD_USB2,

 .start =  usbhsh_host_start,
 .stop =   usbhsh_host_stop,

 /*
 * managing i/o requests and associated device resources
 */

 .urb_enqueue =  usbhsh_urb_enqueue,
 .urb_dequeue =  usbhsh_urb_dequeue,
 .endpoint_disable = usbhsh_endpoint_disable,

 /*
 * root hub
 */

 .hub_status_data = usbhsh_hub_status_data,
 .hub_control =  usbhsh_hub_control,
 .bus_suspend =  usbhsh_bus_nop,
 .bus_resume =  usbhsh_bus_nop,
};

/*
 * interrupt functions
 */

static int usbhsh_irq_attch(struct usbhs_priv *priv,
       struct usbhs_irq_state *irq_state)
{
 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 struct device *dev = usbhs_priv_to_dev(priv);

 dev_dbg(dev, "device attached\n");

 usbhsh_port_stat_set(hpriv, USB_PORT_STAT_CONNECTION);
 usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);

 /*
 * attch interrupt might happen infinitely on some device
 * (on self power USB hub ?)
 * disable it here.
 *
 * usbhsh_is_running() becomes effective
 * according to this process.
 * see
 * usbhsh_is_running()
 * usbhsh_urb_enqueue()
 */

 hpriv->mod.irq_attch = NULL;
 usbhs_irq_callback_update(priv, &hpriv->mod);

 return 0;
}

static int usbhsh_irq_dtch(struct usbhs_priv *priv,
      struct usbhs_irq_state *irq_state)
{
 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 struct device *dev = usbhs_priv_to_dev(priv);

 dev_dbg(dev, "device detached\n");

 usbhsh_port_stat_clear(hpriv, USB_PORT_STAT_CONNECTION);
 usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);

 /*
 * enable attch interrupt again
 *
 * usbhsh_is_running() becomes invalid
 * according to this process.
 * see
 * usbhsh_is_running()
 * usbhsh_urb_enqueue()
 */

 hpriv->mod.irq_attch = usbhsh_irq_attch;
 usbhs_irq_callback_update(priv, &hpriv->mod);

 /*
 * usbhsh_queue_force_pop_all() should be called
 * after usbhsh_is_running() becomes invalid.
 */

 usbhsh_queue_force_pop_all(priv);

 return 0;
}

static int usbhsh_irq_setup_ack(struct usbhs_priv *priv,
    struct usbhs_irq_state *irq_state)
{
 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 struct device *dev = usbhs_priv_to_dev(priv);

 dev_dbg(dev, "setup packet OK\n");

 complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */

 return 0;
}

static int usbhsh_irq_setup_err(struct usbhs_priv *priv,
    struct usbhs_irq_state *irq_state)
{
 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 struct device *dev = usbhs_priv_to_dev(priv);

 dev_dbg(dev, "setup packet Err\n");

 complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */

 return 0;
}

/*
 * module start/stop
 */

static void usbhsh_pipe_init_for_host(struct usbhs_priv *priv)
{
 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 struct usbhs_pipe *pipe;
 struct renesas_usbhs_driver_pipe_config *pipe_configs =
     usbhs_get_dparam(priv, pipe_configs);
 int pipe_size = usbhs_get_dparam(priv, pipe_size);
 int old_type, dir_in, i;

 /* init all pipe */
 old_type = USB_ENDPOINT_XFER_CONTROL;
 for (i = 0; i < pipe_size; i++) {

  /*
 * data "output" will be finished as soon as possible,
 * but there is no guaranty at data "input" case.
 *
 * "input" needs "standby" pipe.
 * So, "input" direction pipe > "output" direction pipe
 * is good idea.
 *
 * 1st USB_ENDPOINT_XFER_xxx will be output direction,
 * and the other will be input direction here.
 *
 * ex)
 * ...
 * USB_ENDPOINT_XFER_ISOC -> dir out
 * USB_ENDPOINT_XFER_ISOC -> dir in
 * USB_ENDPOINT_XFER_BULK -> dir out
 * USB_ENDPOINT_XFER_BULK -> dir in
 * USB_ENDPOINT_XFER_BULK -> dir in
 * ...
 */

  dir_in = (pipe_configs[i].type == old_type);
  old_type = pipe_configs[i].type;

  if (USB_ENDPOINT_XFER_CONTROL == pipe_configs[i].type) {
   pipe = usbhs_dcp_malloc(priv);
   usbhsh_hpriv_to_dcp(hpriv) = pipe;
  } else {
   pipe = usbhs_pipe_malloc(priv,
       pipe_configs[i].type,
       dir_in);
  }

  pipe->mod_private = NULL;
 }
}

static int usbhsh_start(struct usbhs_priv *priv)
{
 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
 struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 struct device *dev = usbhs_priv_to_dev(priv);
 int ret;

 /* add hcd */
 ret = usb_add_hcd(hcd, 0, 0);
 if (ret < 0)
  return 0;
 device_wakeup_enable(hcd->self.controller);

 /*
 * pipe initialize and enable DCP
 */

 usbhs_fifo_init(priv);
 usbhs_pipe_init(priv,
   usbhsh_dma_map_ctrl);
 usbhsh_pipe_init_for_host(priv);

 /*
 * system config enble
 * - HI speed
 * - host
 * - usb module
 */

 usbhs_sys_host_ctrl(priv, 1);

 /*
 * enable irq callback
 */

 mod->irq_attch  = usbhsh_irq_attch;
 mod->irq_dtch  = usbhsh_irq_dtch;
 mod->irq_sack  = usbhsh_irq_setup_ack;
 mod->irq_sign  = usbhsh_irq_setup_err;
 usbhs_irq_callback_update(priv, mod);

 dev_dbg(dev, "start host\n");

 return ret;
}

static int usbhsh_stop(struct usbhs_priv *priv)
{
 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);
 struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 struct device *dev = usbhs_priv_to_dev(priv);

 /*
 * disable irq callback
 */

 mod->irq_attch = NULL;
 mod->irq_dtch = NULL;
 mod->irq_sack = NULL;
 mod->irq_sign = NULL;
 usbhs_irq_callback_update(priv, mod);

 usb_remove_hcd(hcd);

 /* disable sys */
 usbhs_sys_host_ctrl(priv, 0);

 dev_dbg(dev, "quit host\n");

 return 0;
}

int usbhs_mod_host_probe(struct usbhs_priv *priv)
{
 struct usbhsh_hpriv *hpriv;
 struct usb_hcd *hcd;
 struct usbhsh_device *udev;
 struct device *dev = usbhs_priv_to_dev(priv);
 int i;

 /* initialize hcd */
 hcd = usb_create_hcd(&usbhsh_driver, dev, usbhsh_hcd_name);
 if (!hcd) {
  dev_err(dev, "Failed to create hcd\n");
  return -ENOMEM;
 }
 hcd->has_tt = 1; /* for low/full speed */

 /*
 * CAUTION
 *
 * There is no guarantee that it is possible to access usb module here.
 * Don't accesses to it.
 * The accesse will be enable after "usbhsh_start"
 */


 hpriv = usbhsh_hcd_to_hpriv(hcd);

 /*
 * register itself
 */

 usbhs_mod_register(priv, &hpriv->mod, USBHS_HOST);

 /* init hpriv */
 hpriv->mod.name  = "host";
 hpriv->mod.start = usbhsh_start;
 hpriv->mod.stop  = usbhsh_stop;
 usbhsh_port_stat_init(hpriv);

 /* init all device */
 usbhsh_for_each_udev_with_dev0(udev, hpriv, i) {
  udev->usbv = NULL;
  INIT_LIST_HEAD(&udev->ep_list_head);
 }

 dev_info(dev, "host probed\n");

 return 0;
}

int usbhs_mod_host_remove(struct usbhs_priv *priv)
{
 struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv);

 usb_put_hcd(hcd);

 return 0;
}

Messung V0.5 in Prozent
C=94 H=91 G=92

[0.90QuellennavigatorsProjekt 2026-04-29]