Quelle  imx6sll-evk.dts   Sprache: unbekannt

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
 * Copyright 2016 Freescale Semiconductor, Inc.
 * Copyright 2017-2018 NXP.
 *
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "imx6sll.dtsi"

/ {
 model = "Freescale i.MX6SLL EVK Board";
 compatible = "fsl,imx6sll-evk", "fsl,imx6sll";

 chosen {
  stdout-path = &uart1;
 };

 memory@80000000 {
  device_type = "memory";
  reg = <0x80000000 0x80000000>;
 };

 backlight_display: backlight-display {
  compatible = "pwm-backlight";
  pwms = <&pwm1 0 5000000 0>;
  brightness-levels = <0 4 8 16 32 64 128 255>;
  default-brightness-level = <6>;
  status = "okay";
 };

 leds {
  compatible = "gpio-leds";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_led>;

  led-user {
   label = "debug";
   gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "heartbeat";
  };
 };

 reg_usb_otg1_vbus: regulator-otg1-vbus {
  compatible = "regulator-fixed";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
  regulator-name = "usb_otg1_vbus";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
  enable-active-high;
 };

 reg_usb_otg2_vbus: regulator-otg2-vbus {
  compatible = "regulator-fixed";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_usb_otg2_vbus>;
  regulator-name = "usb_otg2_vbus";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
  enable-active-high;
 };

 reg_aud3v: regulator-aud3v {
  compatible = "regulator-fixed";
  regulator-name = "wm8962-supply-3v15";
  regulator-min-microvolt = <3150000>;
  regulator-max-microvolt = <3150000>;
  regulator-boot-on;
 };

 reg_aud4v: regulator-aud4v {
  compatible = "regulator-fixed";
  regulator-name = "wm8962-supply-4v2";
  regulator-min-microvolt = <4325000>;
  regulator-max-microvolt = <4325000>;
  regulator-boot-on;
 };

 reg_lcd_3v3: regulator-lcd-3v3 {
  compatible = "regulator-fixed";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
  regulator-name = "lcd-3v3";
  gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
  enable-active-high;
 };

 reg_lcd_5v: regulator-lcd-5v {
  compatible = "regulator-fixed";
  regulator-name = "lcd-5v0";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
 };

 reg_sd1_vmmc: regulator-sd1-vmmc {
  compatible = "regulator-fixed";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_reg_sd1_vmmc>;
  regulator-name = "SD1_SPWR";
  regulator-min-microvolt = <3000000>;
  regulator-max-microvolt = <3000000>;
  gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
  enable-active-high;
 };

 reg_sd2_vmmc: regulator-sd2-vmmc {
  compatible = "regulator-fixed";
  regulator-name = "eMMC-VCCQ";
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;
  regulator-boot-on;
 };

 reg_sd3_vmmc: regulator-sd3-vmmc {
  compatible = "regulator-fixed";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_reg_sd3_vmmc>;
  regulator-name = "SD3_WIFI";
  regulator-min-microvolt = <3000000>;
  regulator-max-microvolt = <3000000>;
  gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
  enable-active-high;
 };

 panel {
  compatible = "sii,43wvf1g";
  backlight = <&backlight_display>;
  dvdd-supply = <®_lcd_3v3>;
  avdd-supply = <®_lcd_5v>;

  port {
   panel_in: endpoint {
    remote-endpoint = <&display_out>;
   };
  };
 };

 sound {
  compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_hp>;
  model = "wm8962-audio";
  audio-cpu = <&ssi2>;
  audio-codec = <&wm8962>;
  audio-routing =
   "Headphone Jack", "HPOUTL",
   "Headphone Jack", "HPOUTR",
   "Ext Spk", "SPKOUTL",
   "Ext Spk", "SPKOUTR",
   "AMIC", "MICBIAS",
   "IN3R", "AMIC";
  mux-int-port = <2>;
  mux-ext-port = <3>;
  hp-det-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 };
};

&audmux {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_audmux3>;
 status = "okay";
};

&cpu0 {
 arm-supply = <&sw1a_reg>;
 soc-supply = <&sw1c_reg>;
};

&i2c1 {
 clock-frequency = <100000>;
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_i2c1>;
 status = "okay";

 pfuze100: pmic@8 {
  compatible = "fsl,pfuze100";
  reg = <0x08>;

  regulators {
   sw1a_reg: sw1ab {
    regulator-min-microvolt = <300000>;
    regulator-max-microvolt = <1875000>;
    regulator-boot-on;
    regulator-always-on;
    regulator-ramp-delay = <6250>;
   };

   sw1c_reg: sw1c {
    regulator-min-microvolt = <300000>;
    regulator-max-microvolt = <1875000>;
    regulator-boot-on;
    regulator-always-on;
    regulator-ramp-delay = <6250>;
   };

   sw2_reg: sw2 {
    regulator-min-microvolt = <800000>;
    regulator-max-microvolt = <3300000>;
    regulator-boot-on;
    regulator-always-on;
   };

   sw3a_reg: sw3a {
    regulator-min-microvolt = <400000>;
    regulator-max-microvolt = <1975000>;
    regulator-boot-on;
    regulator-always-on;
   };

   sw3b_reg: sw3b {
    regulator-min-microvolt = <400000>;
    regulator-max-microvolt = <1975000>;
    regulator-boot-on;
    regulator-always-on;
   };

   sw4_reg: sw4 {
    regulator-min-microvolt = <800000>;
    regulator-max-microvolt = <3300000>;
    regulator-always-on;
   };

   swbst_reg: swbst {
    regulator-min-microvolt = <5000000>;
    regulator-max-microvolt = <5150000>;
   };

   snvs_reg: vsnvs {
    regulator-min-microvolt = <1000000>;
    regulator-max-microvolt = <3000000>;
    regulator-boot-on;
    regulator-always-on;
   };

   vref_reg: vrefddr {
    regulator-boot-on;
    regulator-always-on;
   };

   vgen1_reg: vgen1 {
    regulator-min-microvolt = <800000>;
    regulator-max-microvolt = <1550000>;
    regulator-always-on;
   };

   vgen2_reg: vgen2 {
    regulator-min-microvolt = <800000>;
    regulator-max-microvolt = <1550000>;
   };

   vgen3_reg: vgen3 {
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;
   };

   vgen4_reg: vgen4 {
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;
    regulator-always-on;
   };

   vgen5_reg: vgen5 {
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;
    regulator-always-on;
   };

   vgen6_reg: vgen6 {
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;
    regulator-always-on;
   };
  };
 };
};

&i2c3 {
 clock-frequency = <100000>;
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_i2c3>;
 status = "okay";

 wm8962: audio-codec@1a {
  compatible = "wlf,wm8962";
  reg = <0x1a>;
  clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>;
  DCVDD-supply = <&vgen3_reg>;
  DBVDD-supply = <®_aud3v>;
  AVDD-supply = <&vgen3_reg>;
  CPVDD-supply = <&vgen3_reg>;
  MICVDD-supply = <®_aud3v>;
  PLLVDD-supply = <&vgen3_reg>;
  SPKVDD1-supply = <®_aud4v>;
  SPKVDD2-supply = <®_aud4v>;
 };
};

&lcdif {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_lcd>;
 status = "okay";

 port {
  display_out: endpoint {
   remote-endpoint = <&panel_in>;
  };
 };
};

&pwm1 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_pwm1>;
};

&snvs_poweroff {
 status = "okay";
};

&snvs_pwrkey {
 status = "okay";
};

&ssi2 {
 status = "okay";
};

&uart1 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_uart1>;
 status = "okay";
};

&usdhc1 {
 pinctrl-names = "default", "state_100mhz", "state_200mhz";
 pinctrl-0 = <&pinctrl_usdhc1>;
 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
 wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
 keep-power-in-suspend;
 wakeup-source;
 vmmc-supply = <®_sd1_vmmc>;
 status = "okay";
};

&usdhc2 {
 pinctrl-names = "default", "state_100mhz", "state_200mhz";
 pinctrl-0 = <&pinctrl_usdhc2>;
 pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
 pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
 bus-width = <8>;
 non-removable;
 vqmmc-supply = <®_sd2_vmmc>;
 status = "okay";
};

&usbotg1 {
 vbus-supply = <®_usb_otg1_vbus>;
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_usbotg1>;
 disable-over-current;
 srp-disable;
 hnp-disable;
 adp-disable;
 status = "okay";
};

&usbotg2 {
 vbus-supply = <®_usb_otg2_vbus>;
 dr_mode = "host";
 disable-over-current;
 status = "okay";
};

&usdhc3 {
 pinctrl-names = "default", "state_100mhz", "state_200mhz";
 pinctrl-0 = <&pinctrl_usdhc3>;
 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
 keep-power-in-suspend;
 wakeup-source;
 vmmc-supply = <®_sd3_vmmc>;
 status = "okay";
};

&wdog1 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_wdog1>;
 fsl,ext-reset-output;
};

&iomuxc {
 pinctrl_audmux3: audmux3grp {
  fsl,pins = <
   MX6SLL_PAD_AUD_TXC__AUD3_TXC  0x4130b0
   MX6SLL_PAD_AUD_TXFS__AUD3_TXFS  0x4130b0
   MX6SLL_PAD_AUD_TXD__AUD3_TXD  0x4110b0
   MX6SLL_PAD_AUD_RXD__AUD3_RXD  0x4130b0
   MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
  >;
 };

 pinctrl_hp: hpgrp {
  fsl,pins = <
   MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
  >;
 };

 pinctrl_reg_sd3_vmmc: sd3vmmcgrp {
  fsl,pins = <
   MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059
  >;
 };

 pinctrl_usb_otg1_vbus: vbus1grp {
  fsl,pins = <
   MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
  >;
 };

 pinctrl_usb_otg2_vbus: vbus2grp {
  fsl,pins = <
   MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
  >;
 };

 pinctrl_reg_lcd_3v3: reglcd3v3grp {
  fsl,pins = <
   MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
  >;
 };

 pinctrl_reg_sd1_vmmc: sd1vmmcgrp {
  fsl,pins = <
   MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
  >;
 };

 pinctrl_uart1: uart1grp {
  fsl,pins = <
   MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
   MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
  >;
 };

 pinctrl_usdhc1: usdhc1grp {
  fsl,pins = <
   MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059
   MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059
   MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059
   MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059
   MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059
   MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059
  >;
 };

 pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
  fsl,pins = <
   MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9
   MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9
   MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9
   MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9
   MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9
   MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9
  >;
 };

 pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
  fsl,pins = <
   MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9
   MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9
   MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9
   MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9
   MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9
   MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9
  >;
 };

 pinctrl_usdhc2: usdhc2grp {
  fsl,pins = <
   MX6SLL_PAD_SD2_CMD__SD2_CMD  0x17059
   MX6SLL_PAD_SD2_CLK__SD2_CLK  0x13059
   MX6SLL_PAD_SD2_DATA0__SD2_DATA0  0x17059
   MX6SLL_PAD_SD2_DATA1__SD2_DATA1  0x17059
   MX6SLL_PAD_SD2_DATA2__SD2_DATA2  0x17059
   MX6SLL_PAD_SD2_DATA3__SD2_DATA3  0x17059
   MX6SLL_PAD_SD2_DATA4__SD2_DATA4  0x17059
   MX6SLL_PAD_SD2_DATA5__SD2_DATA5  0x17059
   MX6SLL_PAD_SD2_DATA6__SD2_DATA6  0x17059
   MX6SLL_PAD_SD2_DATA7__SD2_DATA7  0x17059
   MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x13059
  >;
 };

 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
  fsl,pins = <
   MX6SLL_PAD_SD2_CMD__SD2_CMD  0x170b9
   MX6SLL_PAD_SD2_CLK__SD2_CLK  0x130b9
   MX6SLL_PAD_SD2_DATA0__SD2_DATA0  0x170b9
   MX6SLL_PAD_SD2_DATA1__SD2_DATA1  0x170b9
   MX6SLL_PAD_SD2_DATA2__SD2_DATA2  0x170b9
   MX6SLL_PAD_SD2_DATA3__SD2_DATA3  0x170b9
   MX6SLL_PAD_SD2_DATA4__SD2_DATA4  0x170b9
   MX6SLL_PAD_SD2_DATA5__SD2_DATA5  0x170b9
   MX6SLL_PAD_SD2_DATA6__SD2_DATA6  0x170b9
   MX6SLL_PAD_SD2_DATA7__SD2_DATA7  0x170b9
   MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x130b9
  >;
 };

 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
  fsl,pins = <
   MX6SLL_PAD_SD2_CMD__SD2_CMD  0x170f9
   MX6SLL_PAD_SD2_CLK__SD2_CLK  0x130f9
   MX6SLL_PAD_SD2_DATA0__SD2_DATA0  0x170f9
   MX6SLL_PAD_SD2_DATA1__SD2_DATA1  0x170f9
   MX6SLL_PAD_SD2_DATA2__SD2_DATA2  0x170f9
   MX6SLL_PAD_SD2_DATA3__SD2_DATA3  0x170f9
   MX6SLL_PAD_SD2_DATA4__SD2_DATA4  0x170f9
   MX6SLL_PAD_SD2_DATA5__SD2_DATA5  0x170f9
   MX6SLL_PAD_SD2_DATA6__SD2_DATA6  0x170f9
   MX6SLL_PAD_SD2_DATA7__SD2_DATA7  0x170f9
   MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x130f9
  >;
 };

 pinctrl_usbotg1: usbotg1grp {
  fsl,pins = <
   MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
  >;
 };

 pinctrl_usdhc3: usdhc3grp {
  fsl,pins = <
   MX6SLL_PAD_SD3_CMD__SD3_CMD  0x17061
   MX6SLL_PAD_SD3_CLK__SD3_CLK  0x13061
   MX6SLL_PAD_SD3_DATA0__SD3_DATA0  0x17061
   MX6SLL_PAD_SD3_DATA1__SD3_DATA1  0x17061
   MX6SLL_PAD_SD3_DATA2__SD3_DATA2  0x17061
   MX6SLL_PAD_SD3_DATA3__SD3_DATA3  0x17061
   MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
  >;
 };

 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
  fsl,pins = <
   MX6SLL_PAD_SD3_CMD__SD3_CMD  0x170a1
   MX6SLL_PAD_SD3_CLK__SD3_CLK  0x130a1
   MX6SLL_PAD_SD3_DATA0__SD3_DATA0  0x170a1
   MX6SLL_PAD_SD3_DATA1__SD3_DATA1  0x170a1
   MX6SLL_PAD_SD3_DATA2__SD3_DATA2  0x170a1
   MX6SLL_PAD_SD3_DATA3__SD3_DATA3  0x170a1
   MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
  >;
 };

 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
  fsl,pins = <
   MX6SLL_PAD_SD3_CMD__SD3_CMD  0x170e9
   MX6SLL_PAD_SD3_CLK__SD3_CLK  0x130f9
   MX6SLL_PAD_SD3_DATA0__SD3_DATA0  0x170e9
   MX6SLL_PAD_SD3_DATA1__SD3_DATA1  0x170e9
   MX6SLL_PAD_SD3_DATA2__SD3_DATA2  0x170e9
   MX6SLL_PAD_SD3_DATA3__SD3_DATA3  0x170e9
   MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
  >;
 };

 pinctrl_i2c1: i2c1grp {
  fsl,pins = <
   MX6SLL_PAD_I2C1_SCL__I2C1_SCL  0x4001b8b1
   MX6SLL_PAD_I2C1_SDA__I2C1_SDA  0x4001b8b1
  >;
 };

 pinctrl_i2c3: i2c3grp {
  fsl,pins = <
   MX6SLL_PAD_AUD_RXFS__I2C3_SCL  0x4041b8b1
   MX6SLL_PAD_AUD_RXC__I2C3_SDA   0x4041b8b1
  >;
 };

 pinctrl_lcd: lcdgrp {
  fsl,pins = <
   MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79
   MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79
   MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79
   MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79
   MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79
   MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79
   MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79
   MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79
   MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79
   MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79
   MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79
   MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79
   MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79
   MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79
   MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79
   MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79
   MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79
   MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79
   MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79
   MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79
   MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79
   MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79
   MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79
   MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79
   MX6SLL_PAD_LCD_CLK__LCD_CLK  0x79
   MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79
   MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC  0x79
   MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC  0x79
   MX6SLL_PAD_LCD_RESET__LCD_RESET  0x79
  >;
 };

 pinctrl_led: ledgrp {
  fsl,pins = <
   MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x17059
  >;
 };

 pinctrl_pwm1: pmw1grp {
  fsl,pins = <
   MX6SLL_PAD_PWM1__PWM1_OUT   0x110b0
  >;
 };

 pinctrl_wdog1: wdog1grp {
  fsl,pins = <
   MX6SLL_PAD_WDOG_B__WDOG1_B   0x170b0
  >;
 };
};