Quelle  qcom-sdx55.dtsi   Sprache: unbekannt

// SPDX-License-Identifier: BSD-3-Clause
/*
 * SDX55 SoC device tree source
 *
 * Copyright (c) 2018, The Linux Foundation. All rights reserved.
 * Copyright (c) 2020, Linaro Ltd.
 */

#include <dt-bindings/clock/qcom,gcc-sdx55.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,sdx55.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>

/ {
 #address-cells = <1>;
 #size-cells = <1>;
 qcom,msm-id = <357 0x10000>, <368 0x10000>, <418 0x10000>;
 interrupt-parent = <&intc>;

 memory {
  device_type = "memory";
  reg = <0 0>;
 };

 clocks {
  xo_board: xo-board {
   compatible = "fixed-clock";
   #clock-cells = <0>;
   clock-frequency = <38400000>;
   clock-output-names = "xo_board";
  };

  sleep_clk: sleep-clk {
   compatible = "fixed-clock";
   #clock-cells = <0>;
   clock-frequency = <32000>;
  };

  nand_clk_dummy: nand-clk-dummy {
   compatible = "fixed-clock";
   #clock-cells = <0>;
   clock-frequency = <32000>;
  };
 };

 cpus {
  #address-cells = <1>;
  #size-cells = <0>;

  cpu0: cpu@0 {
   device_type = "cpu";
   compatible = "arm,cortex-a7";
   reg = <0x0>;
   enable-method = "psci";
   clocks = <&apcs>;
   power-domains = <&rpmhpd SDX55_CX>;
   power-domain-names = "perf";
   operating-points-v2 = <&cpu_opp_table>;
  };
 };

 firmware {
  scm {
   compatible = "qcom,scm-sdx55", "qcom,scm";
  };
 };

 cpu_opp_table: opp-table-cpu {
  compatible = "operating-points-v2";
  opp-shared;

  opp-345600000 {
   opp-hz = /bits/ 64 <345600000>;
   required-opps = <&rpmhpd_opp_low_svs>;
  };

  opp-576000000 {
   opp-hz = /bits/ 64 <576000000>;
   required-opps = <&rpmhpd_opp_svs>;
  };

  opp-1094400000 {
   opp-hz = /bits/ 64 <1094400000>;
   required-opps = <&rpmhpd_opp_nom>;
  };

  opp-1555200000 {
   opp-hz = /bits/ 64 <1555200000>;
   required-opps = <&rpmhpd_opp_turbo>;
  };
 };

 psci {
  compatible = "arm,psci-1.0";
  method = "smc";
 };

 reserved-memory {
  #address-cells = <1>;
  #size-cells = <1>;
  ranges;

  hyp_mem: memory@8fc00000 {
   no-map;
   reg = <0x8fc00000 0x80000>;
  };

  ac_db_mem: memory@8fc80000 {
   no-map;
   reg = <0x8fc80000 0x40000>;
  };

  secdata_mem: memory@8fcfd000 {
   no-map;
   reg = <0x8fcfd000 0x1000>;
  };

  sbl_mem: memory@8fd00000 {
   no-map;
   reg = <0x8fd00000 0x100000>;
  };

  aop_image: memory@8fe00000 {
   no-map;
   reg = <0x8fe00000 0x20000>;
  };

  aop_cmd_db: memory@8fe20000 {
   compatible = "qcom,cmd-db";
   reg = <0x8fe20000 0x20000>;
   no-map;
  };

  smem_mem: memory@8fe40000 {
   no-map;
   reg = <0x8fe40000 0xc0000>;
  };

  tz_mem: memory@8ff00000 {
   no-map;
   reg = <0x8ff00000 0x100000>;
  };

  tz_apps_mem: memory@90000000 {
   no-map;
   reg = <0x90000000 0x500000>;
  };
 };

 smem {
  compatible = "qcom,smem";
  memory-region = <&smem_mem>;
  hwlocks = <&tcsr_mutex 3>;
 };

 smp2p-mpss {
  compatible = "qcom,smp2p";
  qcom,smem = <435>, <428>;
  interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
  mboxes = <&apcs 14>;
  qcom,local-pid = <0>;
  qcom,remote-pid = <1>;

  modem_smp2p_out: master-kernel {
   qcom,entry-name = "master-kernel";
   #qcom,smem-state-cells = <1>;
  };

  modem_smp2p_in: slave-kernel {
   qcom,entry-name = "slave-kernel";
   interrupt-controller;
   #interrupt-cells = <2>;
  };

  ipa_smp2p_out: ipa-ap-to-modem {
   qcom,entry-name = "ipa";
   #qcom,smem-state-cells = <1>;
  };

  ipa_smp2p_in: ipa-modem-to-ap {
   qcom,entry-name = "ipa";
   interrupt-controller;
   #interrupt-cells = <2>;
  };
 };

 soc: soc {
  #address-cells = <1>;
  #size-cells = <1>;
  ranges;
  compatible = "simple-bus";

  gcc: clock-controller@100000 {
   compatible = "qcom,gcc-sdx55";
   reg = <0x100000 0x1f0000>;
   #clock-cells = <1>;
   #reset-cells = <1>;
   #power-domain-cells = <1>;
   clock-names = "bi_tcxo", "sleep_clk";
   clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
  };

  blsp1_uart3: serial@831000 {
   compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
   reg = <0x00831000 0x200>;
   interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
   clocks = <&gcc 30>,
     <&gcc 9>;
   clock-names = "core", "iface";
   status = "disabled";
  };

  usb_hsphy: phy@ff4000 {
   compatible = "qcom,sdx55-usb-hs-phy",
         "qcom,usb-snps-hs-7nm-phy";
   reg = <0x00ff4000 0x114>;
   status = "disabled";
   #phy-cells = <0>;

   clocks = <&rpmhcc RPMH_CXO_CLK>;
   clock-names = "ref";

   resets = <&gcc GCC_QUSB2PHY_BCR>;
  };

  usb_qmpphy: phy@ff6000 {
   compatible = "qcom,sdx55-qmp-usb3-uni-phy";
   reg = <0x00ff6000 0x1000>;

   clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
     <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
     <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
     <&gcc GCC_USB3_PHY_PIPE_CLK>;
   clock-names = "aux",
          "ref",
          "cfg_ahb",
          "pipe";
   clock-output-names = "usb3_uni_phy_pipe_clk_src";
   #clock-cells = <0>;
   #phy-cells = <0>;

   resets = <&gcc GCC_USB3_PHY_BCR>,
     <&gcc GCC_USB3PHY_PHY_BCR>;
   reset-names = "phy",
          "phy_phy";

   status = "disabled";
  };

  mc_virt: interconnect@1100000 {
   compatible = "qcom,sdx55-mc-virt";
   reg = <0x01100000 0x400000>;
   #interconnect-cells = <1>;
   qcom,bcm-voters = <&apps_bcm_voter>;
  };

  mem_noc: interconnect@9680000 {
   compatible = "qcom,sdx55-mem-noc";
   reg = <0x09680000 0x40000>;
   #interconnect-cells = <1>;
   qcom,bcm-voters = <&apps_bcm_voter>;
  };

  system_noc: interconnect@162c000 {
   compatible = "qcom,sdx55-system-noc";
   reg = <0x0162c000 0x31200>;
   #interconnect-cells = <1>;
   qcom,bcm-voters = <&apps_bcm_voter>;
  };

  qpic_bam: dma-controller@1b04000 {
   compatible = "qcom,bam-v1.7.0";
   reg = <0x01b04000 0x1c000>;
   interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
   clocks = <&rpmhcc RPMH_QPIC_CLK>;
   clock-names = "bam_clk";
   #dma-cells = <1>;
   qcom,ee = <0>;
   qcom,controlled-remotely;
   status = "disabled";
  };

  qpic_nand: nand-controller@1b30000 {
   compatible = "qcom,sdx55-nand";
   reg = <0x01b30000 0x10000>;
   #address-cells = <1>;
   #size-cells = <0>;
   clocks = <&rpmhcc RPMH_QPIC_CLK>,
     <&nand_clk_dummy>;
   clock-names = "core", "aon";

   dmas = <&qpic_bam 0>,
          <&qpic_bam 1>,
          <&qpic_bam 2>;
   dma-names = "tx", "rx", "cmd";
   status = "disabled";
  };

  pcie_rc: pcie@1c00000 {
   compatible = "qcom,pcie-sdx55";
   reg = <0x01c00000 0x3000>,
         <0x40000000 0xf1d>,
         <0x40000f20 0xc8>,
         <0x40001000 0x1000>,
         <0x40100000 0x100000>;
   reg-names = "parf",
        "dbi",
        "elbi",
        "atu",
        "config";
   device_type = "pci";
   linux,pci-domain = <0>;
   bus-range = <0x00 0xff>;
   num-lanes = <1>;

   #address-cells = <3>;
   #size-cells = <2>;

   ranges = <0x01000000 0x0 0x00000000 0x40200000 0x0 0x100000>,
     <0x02000000 0x0 0x40300000 0x40300000 0x0 0x3fd00000>;

   interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-names = "msi",
       "msi2",
       "msi3",
       "msi4",
       "msi5",
       "msi6",
       "msi7",
       "msi8";
   #interrupt-cells = <1>;
   interrupt-map-mask = <0 0 0 0x7>;
   interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
     <0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
     <0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
     <0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */

   clocks = <&gcc GCC_PCIE_PIPE_CLK>,
     <&gcc GCC_PCIE_AUX_CLK>,
     <&gcc GCC_PCIE_CFG_AHB_CLK>,
     <&gcc GCC_PCIE_MSTR_AXI_CLK>,
     <&gcc GCC_PCIE_SLV_AXI_CLK>,
     <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
     <&gcc GCC_PCIE_SLEEP_CLK>;
   clock-names = "pipe",
          "aux",
          "cfg",
          "bus_master",
          "bus_slave",
          "slave_q2a",
          "sleep";

   assigned-clocks = <&gcc GCC_PCIE_AUX_CLK>;
   assigned-clock-rates = <19200000>;

   iommu-map = <0x0   &apps_smmu 0x0200 0x1>,
        <0x100 &apps_smmu 0x0201 0x1>,
        <0x200 &apps_smmu 0x0202 0x1>,
        <0x300 &apps_smmu 0x0203 0x1>,
        <0x400 &apps_smmu 0x0204 0x1>;

   resets = <&gcc GCC_PCIE_BCR>;
   reset-names = "pci";

   power-domains = <&gcc PCIE_GDSC>;

   phys = <&pcie_phy>;
   phy-names = "pciephy";

   status = "disabled";

   pcie@0 {
    device_type = "pci";
    reg = <0x0 0x0 0x0 0x0 0x0>;
    bus-range = <0x01 0xff>;

    #address-cells = <3>;
    #size-cells = <2>;
    ranges;
   };
  };

  pcie_ep: pcie-ep@1c00000 {
   compatible = "qcom,sdx55-pcie-ep";
   reg = <0x01c00000 0x3000>,
         <0x40000000 0xf1d>,
         <0x40000f20 0xc8>,
         <0x40001000 0x1000>,
         <0x40200000 0x100000>,
         <0x01c03000 0x3000>;
   reg-names = "parf",
        "dbi",
        "elbi",
        "atu",
        "addr_space",
        "mmio";

   qcom,perst-regs = <&tcsr 0xb258 0xb270>;

   clocks = <&gcc GCC_PCIE_AUX_CLK>,
     <&gcc GCC_PCIE_CFG_AHB_CLK>,
     <&gcc GCC_PCIE_MSTR_AXI_CLK>,
     <&gcc GCC_PCIE_SLV_AXI_CLK>,
     <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
     <&gcc GCC_PCIE_SLEEP_CLK>,
     <&gcc GCC_PCIE_0_CLKREF_CLK>;
   clock-names = "aux",
          "cfg",
          "bus_master",
          "bus_slave",
          "slave_q2a",
          "sleep",
          "ref";

   interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-names = "global",
       "doorbell";

   interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>,
     <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_PCIE_0>;
   interconnect-names = "pcie-mem", "cpu-pcie";

   resets = <&gcc GCC_PCIE_BCR>;
   reset-names = "core";
   power-domains = <&gcc PCIE_GDSC>;
   phys = <&pcie_phy>;
   phy-names = "pciephy";
   max-link-speed = <3>;
   num-lanes = <2>;
   linux,pci-domain = <0>;

   status = "disabled";
  };

  pcie_phy: phy@1c06000 {
   compatible = "qcom,sdx55-qmp-pcie-phy";
   reg = <0x01c06000 0x2000>;
   #address-cells = <1>;
   #size-cells = <1>;
   ranges;
   clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
     <&gcc GCC_PCIE_CFG_AHB_CLK>,
     <&gcc GCC_PCIE_0_CLKREF_CLK>,
     <&gcc GCC_PCIE_RCHNG_PHY_CLK>,
     <&gcc GCC_PCIE_PIPE_CLK>;
   clock-names = "aux",
          "cfg_ahb",
          "ref",
          "refgen",
          "pipe";

   clock-output-names = "pcie_pipe_clk";
   #clock-cells = <0>;

   #phy-cells = <0>;

   resets = <&gcc GCC_PCIE_PHY_BCR>;
   reset-names = "phy";

   assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
   assigned-clock-rates = <100000000>;

   status = "disabled";
  };

  ipa: ipa@1e40000 {
   compatible = "qcom,sdx55-ipa";

   iommus = <&apps_smmu 0x5e0 0x0>,
     <&apps_smmu 0x5e2 0x0>;
   reg = <0x1e40000 0x7000>,
         <0x1e50000 0x4b20>,
         <0x1e04000 0x2c000>;
   reg-names = "ipa-reg",
        "ipa-shared",
        "gsi";

   interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
           <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
           <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
           <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
   interrupt-names = "ipa",
       "gsi",
       "ipa-clock-query",
       "ipa-setup-ready";

   clocks = <&rpmhcc RPMH_IPA_CLK>;
   clock-names = "core";

   interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>,
     <&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>,
     <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>;
   interconnect-names = "memory",
          "imem",
          "config";

   qcom,smem-states = <&ipa_smp2p_out 0>,
        <&ipa_smp2p_out 1>;
   qcom,smem-state-names = "ipa-clock-enabled-valid",
      "ipa-clock-enabled";

   status = "disabled";
  };

  tcsr_mutex: hwlock@1f40000 {
   compatible = "qcom,tcsr-mutex";
   reg = <0x01f40000 0x40000>;
   #hwlock-cells = <1>;
  };

  tcsr: syscon@1fc0000 {
   compatible = "qcom,sdx55-tcsr", "syscon";
   reg = <0x01fc0000 0x1000>;
  };

  sdhc_1: mmc@8804000 {
   compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
   reg = <0x08804000 0x1000>;
   interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-names = "hc_irq", "pwr_irq";
   clocks = <&gcc GCC_SDCC1_AHB_CLK>,
     <&gcc GCC_SDCC1_APPS_CLK>;
   clock-names = "iface", "core";
   status = "disabled";
  };

  remoteproc_mpss: remoteproc@4080000 {
   compatible = "qcom,sdx55-mpss-pas";
   reg = <0x04080000 0x4040>;

   interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
           <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
           <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
           <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
           <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
           <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
   interrupt-names = "wdog", "fatal", "ready", "handover",
       "stop-ack", "shutdown-ack";

   clocks = <&rpmhcc RPMH_CXO_CLK>;
   clock-names = "xo";

   power-domains = <&rpmhpd SDX55_CX>,
     <&rpmhpd SDX55_MSS>;
   power-domain-names = "cx", "mss";

   qcom,smem-states = <&modem_smp2p_out 0>;
   qcom,smem-state-names = "stop";

   status = "disabled";

   glink-edge {
    interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
    label = "mpss";
    qcom,remote-pid = <1>;
    mboxes = <&apcs 15>;
   };
  };

  usb: usb@a6f8800 {
   compatible = "qcom,sdx55-dwc3", "qcom,dwc3";
   reg = <0x0a6f8800 0x400>;
   status = "disabled";
   #address-cells = <1>;
   #size-cells = <1>;
   ranges;

   clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
     <&gcc GCC_USB30_MASTER_CLK>,
     <&gcc GCC_USB30_MSTR_AXI_CLK>,
     <&gcc GCC_USB30_SLEEP_CLK>,
     <&gcc GCC_USB30_MOCK_UTMI_CLK>;
   clock-names = "cfg_noc",
          "core",
          "iface",
          "sleep",
          "mock_utmi";

   assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
       <&gcc GCC_USB30_MASTER_CLK>;
   assigned-clock-rates = <19200000>, <200000000>;

   interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
           <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
           <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
           <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
           <&pdc 51 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-names = "pwr_event",
       "hs_phy_irq",
       "dp_hs_phy_irq",
       "dm_hs_phy_irq",
       "ss_phy_irq";

   power-domains = <&gcc USB30_GDSC>;

   resets = <&gcc GCC_USB30_BCR>;

   usb_dwc3: usb@a600000 {
    compatible = "snps,dwc3";
    reg = <0x0a600000 0xcd00>;
    interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
    iommus = <&apps_smmu 0x1a0 0x0>;
    snps,dis_u2_susphy_quirk;
    snps,dis_enblslpm_quirk;
    snps,dis-u1-entry-quirk;
    snps,dis-u2-entry-quirk;
    phys = <&usb_hsphy>, <&usb_qmpphy>;
    phy-names = "usb2-phy", "usb3-phy";
   };
  };

  pdc: interrupt-controller@b210000 {
   compatible = "qcom,sdx55-pdc", "qcom,pdc";
   reg = <0x0b210000 0x30000>;
   qcom,pdc-ranges = <0 179 52>;
   #interrupt-cells = <2>;
   interrupt-parent = <&intc>;
   interrupt-controller;
  };

  restart@c264000 {
   compatible = "qcom,pshold";
   reg = <0x0c264000 0x1000>;
  };

  spmi_bus: spmi@c440000 {
   compatible = "qcom,spmi-pmic-arb";
   reg = <0x0c440000 0x0000d00>,
         <0x0c600000 0x2000000>,
         <0x0e600000 0x0100000>,
         <0x0e700000 0x00a0000>,
         <0x0c40a000 0x0000700>;
   reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
   interrupt-names = "periph_irq";
   interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
   qcom,ee = <0>;
   qcom,channel = <0>;
   #address-cells = <2>;
   #size-cells = <0>;
   interrupt-controller;
   #interrupt-cells = <4>;
  };

  tlmm: pinctrl@f100000 {
   compatible = "qcom,sdx55-pinctrl";
   reg = <0xf100000 0x300000>;
   interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
   gpio-ranges = <&tlmm 0 0 108>;
  };

  sram@1468f000 {
   compatible = "qcom,sdx55-imem", "syscon", "simple-mfd";
   reg = <0x1468f000 0x1000>;

   #address-cells = <1>;
   #size-cells = <1>;

   ranges = <0x0 0x1468f000 0x1000>;

   pil-reloc@94c {
    compatible = "qcom,pil-reloc-info";
    reg = <0x94c 0x200>;
   };
  };

  apps_smmu: iommu@15000000 {
   compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500";
   reg = <0x15000000 0x20000>;
   #iommu-cells = <2>;
   #global-interrupts = <1>;
   interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
  };

  intc: interrupt-controller@17800000 {
   compatible = "qcom,msm-qgic2";
   interrupt-controller;
   interrupt-parent = <&intc>;
   #interrupt-cells = <3>;
   reg = <0x17800000 0x1000>,
         <0x17802000 0x1000>;
  };

  a7pll: clock@17808000 {
   compatible = "qcom,sdx55-a7pll";
   reg = <0x17808000 0x1000>;
   clocks = <&rpmhcc RPMH_CXO_CLK>;
   clock-names = "bi_tcxo";
   #clock-cells = <0>;
  };

  apcs: mailbox@17810000 {
   compatible = "qcom,sdx55-apcs-gcc", "syscon";
   reg = <0x17810000 0x2000>;
   #mbox-cells = <1>;
   clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
   clock-names = "ref", "pll", "aux";
   #clock-cells = <0>;
  };

  watchdog@17817000 {
   compatible = "qcom,apss-wdt-sdx55", "qcom,kpss-wdt";
   reg = <0x17817000 0x1000>;
   clocks = <&sleep_clk>;
  };

  timer@17820000 {
   #address-cells = <1>;
   #size-cells = <1>;
   ranges;
   compatible = "arm,armv7-timer-mem";
   reg = <0x17820000 0x1000>;
   clock-frequency = <19200000>;

   frame@17821000 {
    frame-number = <0>;
    interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
          <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17821000 0x1000>,
          <0x17822000 0x1000>;
   };

   frame@17823000 {
    frame-number = <1>;
    interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17823000 0x1000>;
    status = "disabled";
   };

   frame@17824000 {
    frame-number = <2>;
    interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17824000 0x1000>;
    status = "disabled";
   };

   frame@17825000 {
    frame-number = <3>;
    interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17825000 0x1000>;
    status = "disabled";
   };

   frame@17826000 {
    frame-number = <4>;
    interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17826000 0x1000>;
    status = "disabled";
   };

   frame@17827000 {
    frame-number = <5>;
    interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17827000 0x1000>;
    status = "disabled";
   };

   frame@17828000 {
    frame-number = <6>;
    interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17828000 0x1000>;
    status = "disabled";
   };

   frame@17829000 {
    frame-number = <7>;
    interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17829000 0x1000>;
    status = "disabled";
   };
  };

  apps_rsc: rsc@17830000 {
   compatible = "qcom,rpmh-rsc";
   reg = <0x17830000 0x10000>, <0x17840000 0x10000>;
   reg-names = "drv-0", "drv-1";
   interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
   qcom,tcs-offset = <0xd00>;
   qcom,drv-id = <1>;
   qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   2>,
       <WAKE_TCS    2>, <CONTROL_TCS 1>;

   rpmhcc: clock-controller {
    compatible = "qcom,sdx55-rpmh-clk";
    #clock-cells = <1>;
    clock-names = "xo";
    clocks = <&xo_board>;
   };

   rpmhpd: power-controller {
    compatible = "qcom,sdx55-rpmhpd";
    #power-domain-cells = <1>;
    operating-points-v2 = <&rpmhpd_opp_table>;

    rpmhpd_opp_table: opp-table {
     compatible = "operating-points-v2";

     rpmhpd_opp_ret: opp1 {
      opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
     };

     rpmhpd_opp_min_svs: opp2 {
      opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
     };

     rpmhpd_opp_low_svs: opp3 {
      opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
     };

     rpmhpd_opp_svs: opp4 {
      opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
     };

     rpmhpd_opp_svs_l1: opp5 {
      opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
     };

     rpmhpd_opp_nom: opp6 {
      opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
     };

     rpmhpd_opp_nom_l1: opp7 {
      opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
     };

     rpmhpd_opp_nom_l2: opp8 {
      opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
     };

     rpmhpd_opp_turbo: opp9 {
      opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
     };

     rpmhpd_opp_turbo_l1: opp10 {
      opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
     };
    };
   };

   apps_bcm_voter: bcm-voter {
    compatible = "qcom,bcm-voter";
   };
  };
 };

 timer {
  compatible = "arm,armv7-timer";
  interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
        <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
        <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
        <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
  clock-frequency = <19200000>;
 };
};