Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/arch/arm/boot/dts/st/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 1 kB image not shown  

Quelle  ste-hrefprev60-stuib.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Copyright 2012 ST-Ericsson AB
 */

/dts-v1/;
#include "ste-db8500.dtsi"
#include "ste-href-ab8500.dtsi"
#include "ste-hrefprev60.dtsi"
#include "ste-href-stuib.dtsi"

/ {
 model = "ST-Ericsson HREF (pre-v60) and ST UIB";
 compatible = "st-ericsson,mop500", "st-ericsson,u8500";

 /* ST6G3244ME level translator for 1.8/2.9 V */
 vmmci: regulator-gpio {
  compatible = "regulator-gpio";

  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <2900000>;
  regulator-name = "mmci-reg";
  regulator-type = "voltage";

  startup-delay-us = <100>;

  states = <1800000 0x1
     2900000 0x0>;

  gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
  enable-gpios = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
  enable-active-high;
 };

 soc {
  /* Reset line for the BU21013 touchscreen */
  i2c@80110000 {
   /* Only one of these will be used */
   bu21013_tp@5c {
    interrupt-parent = <&gpio2>;
    interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
    touch-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
    reset-gpios = <&tc3589x_gpio 13 GPIO_LINE_OPEN_DRAIN>;
   };
   bu21013_tp@5d {
    interrupt-parent = <&gpio2>;
    interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
    touch-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
    reset-gpios = <&tc3589x_gpio 13 GPIO_LINE_OPEN_DRAIN>;
   };
  };
 };
};

[ Dauer der Verarbeitung: 0.12 Sekunden  (vorverarbeitet)  ]