Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/arch/arm64/boot/dts/amlogic/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 2 kB image not shown  

Quelle  amlogic-a4-common.dtsi   Sprache: unbekannt

 
Spracherkennung für: .dtsi vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
 */

#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
/ {
 timer {
  compatible = "arm,armv8-timer";
  interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
        <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
        <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
        <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 };

 psci {
  compatible = "arm,psci-1.0";
  method = "smc";
 };

 xtal: xtal-clk {
  compatible = "fixed-clock";
  clock-frequency = <24000000>;
  clock-output-names = "xtal";
  #clock-cells = <0>;
 };

 soc {
  compatible = "simple-bus";
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;

  gic: interrupt-controller@fff01000 {
   compatible = "arm,gic-400";
   reg = <0x0 0xfff01000 0 0x1000>,
         <0x0 0xfff02000 0 0x2000>,
         <0x0 0xfff04000 0 0x2000>,
         <0x0 0xfff06000 0 0x2000>;
   #interrupt-cells = <3>;
   #address-cells = <0>;
   interrupt-controller;
   interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
  };

  apb: bus@fe000000 {
   compatible = "simple-bus";
   reg = <0x0 0xfe000000 0x0 0x480000>;
   #address-cells = <2>;
   #size-cells = <2>;
   ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;

   watchdog@2100 {
    compatible = "amlogic,a4-wdt", "amlogic,t7-wdt";
    reg = <0x0 0x2100 0x0 0x10>;
    clocks = <&xtal>;
   };

   uart_b: serial@7a000 {
    compatible = "amlogic,a4-uart",
          "amlogic,meson-s4-uart";
    reg = <0x0 0x7a000 0x0 0x18>;
    interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
    clocks = <&xtal>, <&xtal>, <&xtal>;
    clock-names = "xtal", "pclk", "baud";
    status = "disabled";
   };

   sec_ao: ao-secure@10220 {
    compatible = "amlogic,a4-ao-secure",
          "amlogic,meson-gx-ao-secure",
          "syscon";
    reg = <0x0 0x10220 0x0 0x140>;
    amlogic,has-chip-id;
   };
  };
 };
};

[ Dauer der Verarbeitung: 0.37 Sekunden  ]