Quelle  ns2.dtsi   Sprache: unbekannt

/*
 *  BSD LICENSE
 *
 *  Copyright (c) 2015 Broadcom.  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions
 *  are met:
 *
 *    * Redistributions of source code must retain the above copyright
 *      notice, this list of conditions and the following disclaimer.
 *    * Redistributions in binary form must reproduce the above copyright
 *      notice, this list of conditions and the following disclaimer in
 *      the documentation and/or other materials provided with the
 *      distribution.
 *    * Neither the name of Broadcom Corporation nor the names of its
 *      contributors may be used to endorse or promote products derived
 *      from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/memreserve/ 0x81000000 0x00200000;

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/bcm-ns2.h>

/ {
 compatible = "brcm,ns2";
 interrupt-parent = <&gic>;
 #address-cells = <2>;
 #size-cells = <2>;

 cpus {
  #address-cells = <2>;
  #size-cells = <0>;

  A57_0: cpu@0 {
   device_type = "cpu";
   compatible = "arm,cortex-a57";
   reg = <0 0>;
   enable-method = "psci";
   next-level-cache = <&CLUSTER0_L2>;
  };

  A57_1: cpu@1 {
   device_type = "cpu";
   compatible = "arm,cortex-a57";
   reg = <0 1>;
   enable-method = "psci";
   next-level-cache = <&CLUSTER0_L2>;
  };

  A57_2: cpu@2 {
   device_type = "cpu";
   compatible = "arm,cortex-a57";
   reg = <0 2>;
   enable-method = "psci";
   next-level-cache = <&CLUSTER0_L2>;
  };

  A57_3: cpu@3 {
   device_type = "cpu";
   compatible = "arm,cortex-a57";
   reg = <0 3>;
   enable-method = "psci";
   next-level-cache = <&CLUSTER0_L2>;
  };

  CLUSTER0_L2: l2-cache@0 {
   compatible = "cache";
   cache-level = <2>;
   cache-unified;
  };
 };

 psci {
  compatible = "arm,psci-1.0";
  method = "smc";
 };

 timer {
  compatible = "arm,armv8-timer";
  interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
         IRQ_TYPE_LEVEL_LOW)>,
        <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
         IRQ_TYPE_LEVEL_LOW)>,
        <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
         IRQ_TYPE_LEVEL_LOW)>,
        <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
         IRQ_TYPE_LEVEL_LOW)>;
 };

 pmu {
  compatible = "arm,cortex-a57-pmu";
  interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
        <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
        <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
        <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
  interrupt-affinity = <&A57_0>,
         <&A57_1>,
         <&A57_2>,
         <&A57_3>;
 };

 pcie0: pcie@20020000 {
  compatible = "brcm,iproc-pcie";
  reg = <0 0x20020000 0 0x1000>;
  dma-coherent;

  #interrupt-cells = <1>;
  interrupt-map-mask = <0 0 0 0>;
  interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;

  linux,pci-domain = <0>;

  bus-range = <0x00 0xff>;

  #address-cells = <3>;
  #size-cells = <2>;
  device_type = "pci";
  ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>;

  brcm,pcie-ob;
  brcm,pcie-ob-oarr-size;
  brcm,pcie-ob-axi-offset = <0x00000000>;

  status = "disabled";

  phys = <&pci_phy0>;
  phy-names = "pcie-phy";

  msi-parent = <&v2m0>;
 };

 pcie4: pcie@50020000 {
  compatible = "brcm,iproc-pcie";
  reg = <0 0x50020000 0 0x1000>;
  dma-coherent;

  #interrupt-cells = <1>;
  interrupt-map-mask = <0 0 0 0>;
  interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;

  linux,pci-domain = <4>;

  bus-range = <0x00 0xff>;

  #address-cells = <3>;
  #size-cells = <2>;
  device_type = "pci";
  ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>;

  brcm,pcie-ob;
  brcm,pcie-ob-oarr-size;
  brcm,pcie-ob-axi-offset = <0x30000000>;

  status = "disabled";

  phys = <&pci_phy1>;
  phy-names = "pcie-phy";

  msi-parent = <&v2m0>;
 };

 pcie8: pcie@60c00000 {
  compatible = "brcm,iproc-pcie-paxc";
  reg = <0 0x60c00000 0 0x1000>;
  dma-coherent;
  linux,pci-domain = <8>;

  bus-range = <0x0 0x1>;

  #address-cells = <3>;
  #size-cells = <2>;
  device_type = "pci";
  ranges = <0x83000000 0 0x00000000 0 0x60000000 0 0x00c00000>;

  status = "disabled";

  msi-parent = <&v2m0>;
 };

 soc: soc {
  compatible = "simple-bus";
  #address-cells = <1>;
  #size-cells = <1>;
  ranges = <0 0 0 0xffffffff>;

  #include "ns2-clock.dtsi"

  enet: ethernet@61000000 {
   compatible = "brcm,ns2-amac";
   reg = <0x61000000 0x1000>,
         <0x61090000 0x1000>,
         <0x61030000 0x100>;
   reg-names = "amac_base", "idm_base", "nicpm_base";
   interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
   dma-coherent;
   phy-handle = <&gphy0>;
   phy-mode = "rgmii";
   status = "disabled";
  };

  pdc0: iproc-pdc0@612c0000 {
   compatible = "brcm,iproc-pdc-mbox";
   reg = <0x612c0000 0x445>;  /* PDC FS0 regs */
   interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
   #mbox-cells = <1>;
   dma-coherent;
   brcm,rx-status-len = <32>;
   brcm,use-bcm-hdr;
  };

  crypto0: crypto@612d0000 {
   compatible = "brcm,spum-crypto";
   reg = <0x612d0000 0x900>;
   mboxes = <&pdc0 0>;
  };

  pdc1: iproc-pdc1@612e0000 {
   compatible = "brcm,iproc-pdc-mbox";
   reg = <0x612e0000 0x445>;  /* PDC FS1 regs */
   interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
   #mbox-cells = <1>;
   dma-coherent;
   brcm,rx-status-len = <32>;
   brcm,use-bcm-hdr;
  };

  crypto1: crypto@612f0000 {
   compatible = "brcm,spum-crypto";
   reg = <0x612f0000 0x900>;
   mboxes = <&pdc1 0>;
  };

  pdc2: iproc-pdc2@61300000 {
   compatible = "brcm,iproc-pdc-mbox";
   reg = <0x61300000 0x445>;  /* PDC FS2 regs */
   interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
   #mbox-cells = <1>;
   dma-coherent;
   brcm,rx-status-len = <32>;
   brcm,use-bcm-hdr;
  };

  crypto2: crypto@61310000 {
   compatible = "brcm,spum-crypto";
   reg = <0x61310000 0x900>;
   mboxes = <&pdc2 0>;
  };

  pdc3: iproc-pdc3@61320000 {
   compatible = "brcm,iproc-pdc-mbox";
   reg = <0x61320000 0x445>;  /* PDC FS3 regs */
   interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
   #mbox-cells = <1>;
   dma-coherent;
   brcm,rx-status-len = <32>;
   brcm,use-bcm-hdr;
  };

  crypto3: crypto@61330000 {
   compatible = "brcm,spum-crypto";
   reg = <0x61330000 0x900>;
   mboxes = <&pdc3 0>;
  };

  dma0: dma-controller@61360000 {
   compatible = "arm,pl330", "arm,primecell";
   reg = <0x61360000 0x1000>;
   interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
   #dma-cells = <1>;
   clocks = <&iprocslow>;
   clock-names = "apb_pclk";
  };

  smmu: iommu@64000000 {
   compatible = "arm,mmu-500";
   reg = <0x64000000 0x40000>;
   #global-interrupts = <2>;
   interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
   #iommu-cells = <1>;
  };

  pinctrl: pinctrl@6501d130 {
   compatible = "brcm,ns2-pinmux";
   reg = <0x6501d130 0x08>,
         <0x660a0028 0x04>,
         <0x660009b0 0x40>;
  };

  gpio_aon: gpio@65024800 {
   compatible = "brcm,iproc-gpio";
   reg = <0x65024800 0x50>,
         <0x65024008 0x18>;
   ngpios = <6>;
   #gpio-cells = <2>;
   gpio-controller;
  };

  gic: interrupt-controller@65210000 {
   compatible = "arm,gic-400";
   #interrupt-cells = <3>;
   interrupt-controller;
   reg = <0x65210000 0x1000>,
         <0x65220000 0x1000>,
         <0x65240000 0x2000>,
         <0x65260000 0x1000>;
   interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
          IRQ_TYPE_LEVEL_HIGH)>;

   #address-cells = <1>;
   #size-cells = <1>;
   ranges = <0 0x652e0000 0x80000>;

   v2m0: v2m@0 {
    compatible = "arm,gic-v2m-frame";
    msi-controller;
    reg = <0x00000 0x1000>;
    arm,msi-base-spi = <72>;
    arm,msi-num-spis = <16>;
   };

   v2m1: v2m@10000 {
    compatible = "arm,gic-v2m-frame";
    msi-controller;
    reg = <0x10000 0x1000>;
    arm,msi-base-spi = <88>;
    arm,msi-num-spis = <16>;
   };

   v2m2: v2m@20000 {
    compatible = "arm,gic-v2m-frame";
    msi-controller;
    reg = <0x20000 0x1000>;
    arm,msi-base-spi = <104>;
    arm,msi-num-spis = <16>;
   };

   v2m3: v2m@30000 {
    compatible = "arm,gic-v2m-frame";
    msi-controller;
    reg = <0x30000 0x1000>;
    arm,msi-base-spi = <120>;
    arm,msi-num-spis = <16>;
   };

   v2m4: v2m@40000 {
    compatible = "arm,gic-v2m-frame";
    msi-controller;
    reg = <0x40000 0x1000>;
    arm,msi-base-spi = <136>;
    arm,msi-num-spis = <16>;
   };

   v2m5: v2m@50000 {
    compatible = "arm,gic-v2m-frame";
    msi-controller;
    reg = <0x50000 0x1000>;
    arm,msi-base-spi = <152>;
    arm,msi-num-spis = <16>;
   };

   v2m6: v2m@60000 {
    compatible = "arm,gic-v2m-frame";
    msi-controller;
    reg = <0x60000 0x1000>;
    arm,msi-base-spi = <168>;
    arm,msi-num-spis = <16>;
   };

   v2m7: v2m@70000 {
    compatible = "arm,gic-v2m-frame";
    msi-controller;
    reg = <0x70000 0x1000>;
    arm,msi-base-spi = <184>;
    arm,msi-num-spis = <16>;
   };
  };

  cci@65590000 {
   compatible = "arm,cci-400";
   #address-cells = <1>;
   #size-cells = <1>;
   reg = <0x65590000 0x1000>;
   ranges = <0 0x65590000 0x10000>;

   pmu@9000 {
    compatible = "arm,cci-400-pmu,r1",
          "arm,cci-400-pmu";
    reg = <0x9000 0x4000>;
    interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
          <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
          <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
          <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
          <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
          <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
   };
  };

  usbdrd_phy: phy@66000960 {
   #phy-cells = <0>;
   compatible = "brcm,ns2-drd-phy";
   reg = <0x66000960 0x24>,
         <0x67012800 0x4>,
         <0x6501d148 0x4>,
         <0x664d0700 0x4>;
   reg-names = "icfg", "rst-ctrl",
        "crmu-ctrl", "usb2-strap";
   id-gpios = <&gpio_g 30 0>;
   vbus-gpios = <&gpio_g 31 0>;
   status = "disabled";
  };

  pwm: pwm@66010000 {
   compatible = "brcm,iproc-pwm";
   reg = <0x66010000 0x28>;
   clocks = <&osc>;
   #pwm-cells = <3>;
   status = "disabled";
  };

  mdio_mux_iproc: mdio-mux@66020000 {
   compatible = "brcm,mdio-mux-iproc";
   reg = <0x66020000 0x250>;
   #address-cells = <1>;
   #size-cells = <0>;

   mdio@0 {
    reg = <0x0>;
    #address-cells = <1>;
    #size-cells = <0>;

    pci_phy0: pci-phy@0 {
     compatible = "brcm,ns2-pcie-phy";
     reg = <0x0>;
     #phy-cells = <0>;
     status = "disabled";
    };
   };

   mdio@7 {
    reg = <0x7>;
    #address-cells = <1>;
    #size-cells = <0>;

    pci_phy1: pci-phy@0 {
     compatible = "brcm,ns2-pcie-phy";
     reg = <0x0>;
     #phy-cells = <0>;
     status = "disabled";
    };
   };

   mdio@10 {
    reg = <0x10>;
    #address-cells = <1>;
    #size-cells = <0>;
   };
  };

  timer0: timer@66030000 {
   compatible = "arm,sp804", "arm,primecell";
   reg = <0x66030000 0x1000>;
   interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
   clocks = <&iprocslow>,
     <&iprocslow>,
     <&iprocslow>;
   clock-names = "timer1", "timer2", "apb_pclk";
  };

  timer1: timer@66040000 {
   compatible = "arm,sp804", "arm,primecell";
   reg = <0x66040000 0x1000>;
   interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
   clocks = <&iprocslow>,
     <&iprocslow>,
     <&iprocslow>;
   clock-names = "timer1", "timer2", "apb_pclk";
  };

  timer2: timer@66050000 {
   compatible = "arm,sp804", "arm,primecell";
   reg = <0x66050000 0x1000>;
   interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
   clocks = <&iprocslow>,
     <&iprocslow>,
     <&iprocslow>;
   clock-names = "timer1", "timer2", "apb_pclk";
  };

  timer3: timer@66060000 {
   compatible = "arm,sp804", "arm,primecell";
   reg = <0x66060000 0x1000>;
   interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
   clocks = <&iprocslow>,
     <&iprocslow>,
     <&iprocslow>;
   clock-names = "timer1", "timer2", "apb_pclk";
  };

  i2c0: i2c@66080000 {
   compatible = "brcm,iproc-i2c";
   reg = <0x66080000 0x100>;
   #address-cells = <1>;
   #size-cells = <0>;
   interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
   clock-frequency = <100000>;
   status = "disabled";
  };

  wdt0: watchdog@66090000 {
   compatible = "arm,sp805", "arm,primecell";
   reg = <0x66090000 0x1000>;
   interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
   clocks = <&iprocslow>, <&iprocslow>;
   clock-names = "wdog_clk", "apb_pclk";
  };

  gpio_g: gpio@660a0000 {
   compatible = "brcm,iproc-gpio";
   reg = <0x660a0000 0x50>;
   ngpios = <32>;
   #gpio-cells = <2>;
   gpio-controller;
   interrupt-controller;
   #interrupt-cells = <2>;
   interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
  };

  i2c1: i2c@660b0000 {
   compatible = "brcm,iproc-i2c";
   reg = <0x660b0000 0x100>;
   #address-cells = <1>;
   #size-cells = <0>;
   interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
   clock-frequency = <100000>;
   status = "disabled";
  };

  uart0: serial@66100000 {
   compatible = "snps,dw-apb-uart";
   reg = <0x66100000 0x100>;
   interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
   clocks = <&iprocslow>;
   reg-shift = <2>;
   reg-io-width = <4>;
   status = "disabled";
  };

  uart1: serial@66110000 {
   compatible = "snps,dw-apb-uart";
   reg = <0x66110000 0x100>;
   interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
   clocks = <&iprocslow>;
   reg-shift = <2>;
   reg-io-width = <4>;
   status = "disabled";
  };

  uart2: serial@66120000 {
   compatible = "snps,dw-apb-uart";
   reg = <0x66120000 0x100>;
   interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
   clocks = <&iprocslow>;
   reg-shift = <2>;
   reg-io-width = <4>;
   status = "disabled";
  };

  uart3: serial@66130000 {
   compatible = "snps,dw-apb-uart";
   reg = <0x66130000 0x100>;
   interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
   reg-shift = <2>;
   reg-io-width = <4>;
   clocks = <&osc>;
   status = "disabled";
  };

  ssp0: spi@66180000 {
   compatible = "arm,pl022", "arm,primecell";
   reg = <0x66180000 0x1000>;
   interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
   clocks = <&iprocslow>, <&iprocslow>;
   clock-names = "sspclk", "apb_pclk";
   #address-cells = <1>;
   #size-cells = <0>;
   status = "disabled";
  };

  ssp1: spi@66190000 {
   compatible = "arm,pl022", "arm,primecell";
   reg = <0x66190000 0x1000>;
   interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
   clocks = <&iprocslow>, <&iprocslow>;
   clock-names = "sspclk", "apb_pclk";
   #address-cells = <1>;
   #size-cells = <0>;
   status = "disabled";
  };

  hwrng: hwrng@66220000 {
   compatible = "brcm,iproc-rng200";
   reg = <0x66220000 0x28>;
  };

  sata_phy: sata_phy@663f0100 {
   compatible = "brcm,iproc-ns2-sata-phy";
   reg = <0x663f0100 0x1f00>,
         <0x663f004c 0x10>;
   reg-names = "phy", "phy-ctrl";
   #address-cells = <1>;
   #size-cells = <0>;

   sata_phy0: sata-phy@0 {
    reg = <0>;
    #phy-cells = <0>;
    status = "disabled";
   };

   sata_phy1: sata-phy@1 {
    reg = <1>;
    #phy-cells = <0>;
    status = "disabled";
   };
  };

  sata: sata@663f2000 {
   compatible = "brcm,iproc-ahci", "generic-ahci";
   reg = <0x663f2000 0x1000>;
   dma-coherent;
   reg-names = "ahci";
   interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
   #address-cells = <1>;
   #size-cells = <0>;
   status = "disabled";

   sata0: sata-port@0 {
    reg = <0>;
    phys = <&sata_phy0>;
    phy-names = "sata-phy";
   };

   sata1: sata-port@1 {
    reg = <1>;
    phys = <&sata_phy1>;
    phy-names = "sata-phy";
   };
  };

  sdio0: sdhci@66420000 {
   compatible = "brcm,sdhci-iproc-cygnus";
   reg = <0x66420000 0x100>;
   interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
   dma-coherent;
   bus-width = <8>;
   clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
   status = "disabled";
  };

  sdio1: sdhci@66430000 {
   compatible = "brcm,sdhci-iproc-cygnus";
   reg = <0x66430000 0x100>;
   interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
   dma-coherent;
   bus-width = <8>;
   clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
   status = "disabled";
  };

  nand: nand@66460000 {
   compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
   reg = <0x66460000 0x600>,
         <0x67015408 0x600>,
         <0x66460f00 0x20>;
   reg-names = "nand", "iproc-idm", "iproc-ext";
   interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;

   #address-cells = <1>;
   #size-cells = <0>;

   brcm,nand-has-wp;
  };

  qspi: spi@66470200 {
   compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
   reg = <0x66470200 0x184>,
    <0x66470000 0x124>,
    <0x67017408 0x004>,
    <0x664703a0 0x01c>;
   reg-names = "mspi", "bspi", "intr_regs",
    "intr_status_reg";
   interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-names = "spi_l1_intr";
   clocks = <&iprocmed>;
   clock-names = "iprocmed";
   num-cs = <2>;
   #address-cells = <1>;
   #size-cells = <0>;
  };

 };
};