SSL sm8150.dtsi   Sprache: unbekannt

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
 * Copyright (c) 2019, Linaro Limited
 */

#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,dispcc-sm8150.h>
#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
#include <dt-bindings/clock/qcom,gcc-sm8150.h>
#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
#include <dt-bindings/clock/qcom,videocc-sm8150.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sm8150.h>
#include <dt-bindings/clock/qcom,sm8150-camcc.h>
#include <dt-bindings/thermal/thermal.h>

/ {
 interrupt-parent = <&intc>;

 #address-cells = <2>;
 #size-cells = <2>;

 chosen { };

 clocks {
  xo_board: xo-board {
   compatible = "fixed-clock";
   #clock-cells = <0>;
   clock-frequency = <38400000>;
   clock-output-names = "xo_board";
  };

  sleep_clk: sleep-clk {
   compatible = "fixed-clock";
   #clock-cells = <0>;
   clock-frequency = <32764>;
   clock-output-names = "sleep_clk";
  };
 };

 cpus {
  #address-cells = <2>;
  #size-cells = <0>;

  cpu0: cpu@0 {
   device_type = "cpu";
   compatible = "qcom,kryo485";
   reg = <0x0 0x0>;
   clocks = <&cpufreq_hw 0>;
   enable-method = "psci";
   capacity-dmips-mhz = <488>;
   dynamic-power-coefficient = <232>;
   next-level-cache = <&l2_0>;
   qcom,freq-domain = <&cpufreq_hw 0>;
   operating-points-v2 = <&cpu0_opp_table>;
   interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
     <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
   power-domains = <&cpu_pd0>;
   power-domain-names = "psci";
   #cooling-cells = <2>;
   l2_0: l2-cache {
    compatible = "cache";
    cache-level = <2>;
    cache-unified;
    next-level-cache = <&l3_0>;
    l3_0: l3-cache {
     compatible = "cache";
     cache-level = <3>;
     cache-unified;
    };
   };
  };

  cpu1: cpu@100 {
   device_type = "cpu";
   compatible = "qcom,kryo485";
   reg = <0x0 0x100>;
   clocks = <&cpufreq_hw 0>;
   enable-method = "psci";
   capacity-dmips-mhz = <488>;
   dynamic-power-coefficient = <232>;
   next-level-cache = <&l2_100>;
   qcom,freq-domain = <&cpufreq_hw 0>;
   operating-points-v2 = <&cpu0_opp_table>;
   interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
     <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
   power-domains = <&cpu_pd1>;
   power-domain-names = "psci";
   #cooling-cells = <2>;
   l2_100: l2-cache {
    compatible = "cache";
    cache-level = <2>;
    cache-unified;
    next-level-cache = <&l3_0>;
   };
  };

  cpu2: cpu@200 {
   device_type = "cpu";
   compatible = "qcom,kryo485";
   reg = <0x0 0x200>;
   clocks = <&cpufreq_hw 0>;
   enable-method = "psci";
   capacity-dmips-mhz = <488>;
   dynamic-power-coefficient = <232>;
   next-level-cache = <&l2_200>;
   qcom,freq-domain = <&cpufreq_hw 0>;
   operating-points-v2 = <&cpu0_opp_table>;
   interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
     <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
   power-domains = <&cpu_pd2>;
   power-domain-names = "psci";
   #cooling-cells = <2>;
   l2_200: l2-cache {
    compatible = "cache";
    cache-level = <2>;
    cache-unified;
    next-level-cache = <&l3_0>;
   };
  };

  cpu3: cpu@300 {
   device_type = "cpu";
   compatible = "qcom,kryo485";
   reg = <0x0 0x300>;
   clocks = <&cpufreq_hw 0>;
   enable-method = "psci";
   capacity-dmips-mhz = <488>;
   dynamic-power-coefficient = <232>;
   next-level-cache = <&l2_300>;
   qcom,freq-domain = <&cpufreq_hw 0>;
   operating-points-v2 = <&cpu0_opp_table>;
   interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
     <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
   power-domains = <&cpu_pd3>;
   power-domain-names = "psci";
   #cooling-cells = <2>;
   l2_300: l2-cache {
    compatible = "cache";
    cache-level = <2>;
    cache-unified;
    next-level-cache = <&l3_0>;
   };
  };

  cpu4: cpu@400 {
   device_type = "cpu";
   compatible = "qcom,kryo485";
   reg = <0x0 0x400>;
   clocks = <&cpufreq_hw 1>;
   enable-method = "psci";
   capacity-dmips-mhz = <1024>;
   dynamic-power-coefficient = <369>;
   next-level-cache = <&l2_400>;
   qcom,freq-domain = <&cpufreq_hw 1>;
   operating-points-v2 = <&cpu4_opp_table>;
   interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
     <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
   power-domains = <&cpu_pd4>;
   power-domain-names = "psci";
   #cooling-cells = <2>;
   l2_400: l2-cache {
    compatible = "cache";
    cache-level = <2>;
    cache-unified;
    next-level-cache = <&l3_0>;
   };
  };

  cpu5: cpu@500 {
   device_type = "cpu";
   compatible = "qcom,kryo485";
   reg = <0x0 0x500>;
   clocks = <&cpufreq_hw 1>;
   enable-method = "psci";
   capacity-dmips-mhz = <1024>;
   dynamic-power-coefficient = <369>;
   next-level-cache = <&l2_500>;
   qcom,freq-domain = <&cpufreq_hw 1>;
   operating-points-v2 = <&cpu4_opp_table>;
   interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
     <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
   power-domains = <&cpu_pd5>;
   power-domain-names = "psci";
   #cooling-cells = <2>;
   l2_500: l2-cache {
    compatible = "cache";
    cache-level = <2>;
    cache-unified;
    next-level-cache = <&l3_0>;
   };
  };

  cpu6: cpu@600 {
   device_type = "cpu";
   compatible = "qcom,kryo485";
   reg = <0x0 0x600>;
   clocks = <&cpufreq_hw 1>;
   enable-method = "psci";
   capacity-dmips-mhz = <1024>;
   dynamic-power-coefficient = <369>;
   next-level-cache = <&l2_600>;
   qcom,freq-domain = <&cpufreq_hw 1>;
   operating-points-v2 = <&cpu4_opp_table>;
   interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
     <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
   power-domains = <&cpu_pd6>;
   power-domain-names = "psci";
   #cooling-cells = <2>;
   l2_600: l2-cache {
    compatible = "cache";
    cache-level = <2>;
    cache-unified;
    next-level-cache = <&l3_0>;
   };
  };

  cpu7: cpu@700 {
   device_type = "cpu";
   compatible = "qcom,kryo485";
   reg = <0x0 0x700>;
   clocks = <&cpufreq_hw 2>;
   enable-method = "psci";
   capacity-dmips-mhz = <1024>;
   dynamic-power-coefficient = <421>;
   next-level-cache = <&l2_700>;
   qcom,freq-domain = <&cpufreq_hw 2>;
   operating-points-v2 = <&cpu7_opp_table>;
   interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
     <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
   power-domains = <&cpu_pd7>;
   power-domain-names = "psci";
   #cooling-cells = <2>;
   l2_700: l2-cache {
    compatible = "cache";
    cache-level = <2>;
    cache-unified;
    next-level-cache = <&l3_0>;
   };
  };

  cpu-map {
   cluster0 {
    core0 {
     cpu = <&cpu0>;
    };

    core1 {
     cpu = <&cpu1>;
    };

    core2 {
     cpu = <&cpu2>;
    };

    core3 {
     cpu = <&cpu3>;
    };

    core4 {
     cpu = <&cpu4>;
    };

    core5 {
     cpu = <&cpu5>;
    };

    core6 {
     cpu = <&cpu6>;
    };

    core7 {
     cpu = <&cpu7>;
    };
   };
  };

  idle-states {
   entry-method = "psci";

   little_cpu_sleep_0: cpu-sleep-0-0 {
    compatible = "arm,idle-state";
    idle-state-name = "little-rail-power-collapse";
    arm,psci-suspend-param = <0x40000004>;
    entry-latency-us = <355>;
    exit-latency-us = <909>;
    min-residency-us = <3934>;
    local-timer-stop;
   };

   big_cpu_sleep_0: cpu-sleep-1-0 {
    compatible = "arm,idle-state";
    idle-state-name = "big-rail-power-collapse";
    arm,psci-suspend-param = <0x40000004>;
    entry-latency-us = <241>;
    exit-latency-us = <1461>;
    min-residency-us = <4488>;
    local-timer-stop;
   };
  };

  domain-idle-states {
   cluster_sleep_0: cluster-sleep-0 {
    compatible = "domain-idle-state";
    arm,psci-suspend-param = <0x4100c244>;
    entry-latency-us = <3263>;
    exit-latency-us = <6562>;
    min-residency-us = <9987>;
   };
  };
 };

 cpu0_opp_table: opp-table-cpu0 {
  compatible = "operating-points-v2";
  opp-shared;

  cpu0_opp1: opp-300000000 {
   opp-hz = /bits/ 64 <300000000>;
   opp-peak-kBps = <800000 9600000>;
  };

  cpu0_opp2: opp-403200000 {
   opp-hz = /bits/ 64 <403200000>;
   opp-peak-kBps = <800000 9600000>;
  };

  cpu0_opp3: opp-499200000 {
   opp-hz = /bits/ 64 <499200000>;
   opp-peak-kBps = <800000 12902400>;
  };

  cpu0_opp4: opp-576000000 {
   opp-hz = /bits/ 64 <576000000>;
   opp-peak-kBps = <800000 12902400>;
  };

  cpu0_opp5: opp-672000000 {
   opp-hz = /bits/ 64 <672000000>;
   opp-peak-kBps = <800000 15974400>;
  };

  cpu0_opp6: opp-768000000 {
   opp-hz = /bits/ 64 <768000000>;
   opp-peak-kBps = <1804000 19660800>;
  };

  cpu0_opp7: opp-844800000 {
   opp-hz = /bits/ 64 <844800000>;
   opp-peak-kBps = <1804000 19660800>;
  };

  cpu0_opp8: opp-940800000 {
   opp-hz = /bits/ 64 <940800000>;
   opp-peak-kBps = <1804000 22732800>;
  };

  cpu0_opp9: opp-1036800000 {
   opp-hz = /bits/ 64 <1036800000>;
   opp-peak-kBps = <1804000 22732800>;
  };

  cpu0_opp10: opp-1113600000 {
   opp-hz = /bits/ 64 <1113600000>;
   opp-peak-kBps = <2188000 25804800>;
  };

  cpu0_opp11: opp-1209600000 {
   opp-hz = /bits/ 64 <1209600000>;
   opp-peak-kBps = <2188000 31948800>;
  };

  cpu0_opp12: opp-1305600000 {
   opp-hz = /bits/ 64 <1305600000>;
   opp-peak-kBps = <3072000 31948800>;
  };

  cpu0_opp13: opp-1382400000 {
   opp-hz = /bits/ 64 <1382400000>;
   opp-peak-kBps = <3072000 31948800>;
  };

  cpu0_opp14: opp-1478400000 {
   opp-hz = /bits/ 64 <1478400000>;
   opp-peak-kBps = <3072000 31948800>;
  };

  cpu0_opp15: opp-1555200000 {
   opp-hz = /bits/ 64 <1555200000>;
   opp-peak-kBps = <3072000 40550400>;
  };

  cpu0_opp16: opp-1632000000 {
   opp-hz = /bits/ 64 <1632000000>;
   opp-peak-kBps = <3072000 40550400>;
  };

  cpu0_opp17: opp-1708800000 {
   opp-hz = /bits/ 64 <1708800000>;
   opp-peak-kBps = <3072000 43008000>;
  };

  cpu0_opp18: opp-1785600000 {
   opp-hz = /bits/ 64 <1785600000>;
   opp-peak-kBps = <3072000 43008000>;
  };
 };

 cpu4_opp_table: opp-table-cpu4 {
  compatible = "operating-points-v2";
  opp-shared;

  cpu4_opp1: opp-710400000 {
   opp-hz = /bits/ 64 <710400000>;
   opp-peak-kBps = <1804000 15974400>;
  };

  cpu4_opp2: opp-825600000 {
   opp-hz = /bits/ 64 <825600000>;
   opp-peak-kBps = <2188000 19660800>;
  };

  cpu4_opp3: opp-940800000 {
   opp-hz = /bits/ 64 <940800000>;
   opp-peak-kBps = <2188000 22732800>;
  };

  cpu4_opp4: opp-1056000000 {
   opp-hz = /bits/ 64 <1056000000>;
   opp-peak-kBps = <3072000 25804800>;
  };

  cpu4_opp5: opp-1171200000 {
   opp-hz = /bits/ 64 <1171200000>;
   opp-peak-kBps = <3072000 31948800>;
  };

  cpu4_opp6: opp-1286400000 {
   opp-hz = /bits/ 64 <1286400000>;
   opp-peak-kBps = <4068000 31948800>;
  };

  cpu4_opp7: opp-1401600000 {
   opp-hz = /bits/ 64 <1401600000>;
   opp-peak-kBps = <4068000 31948800>;
  };

  cpu4_opp8: opp-1497600000 {
   opp-hz = /bits/ 64 <1497600000>;
   opp-peak-kBps = <4068000 40550400>;
  };

  cpu4_opp9: opp-1612800000 {
   opp-hz = /bits/ 64 <1612800000>;
   opp-peak-kBps = <4068000 40550400>;
  };

  cpu4_opp10: opp-1708800000 {
   opp-hz = /bits/ 64 <1708800000>;
   opp-peak-kBps = <4068000 43008000>;
  };

  cpu4_opp11: opp-1804800000 {
   opp-hz = /bits/ 64 <1804800000>;
   opp-peak-kBps = <6220000 43008000>;
  };

  cpu4_opp12: opp-1920000000 {
   opp-hz = /bits/ 64 <1920000000>;
   opp-peak-kBps = <6220000 49152000>;
  };

  cpu4_opp13: opp-2016000000 {
   opp-hz = /bits/ 64 <2016000000>;
   opp-peak-kBps = <7216000 49152000>;
  };

  cpu4_opp14: opp-2131200000 {
   opp-hz = /bits/ 64 <2131200000>;
   opp-peak-kBps = <8368000 49152000>;
  };

  cpu4_opp15: opp-2227200000 {
   opp-hz = /bits/ 64 <2227200000>;
   opp-peak-kBps = <8368000 51609600>;
  };

  cpu4_opp16: opp-2323200000 {
   opp-hz = /bits/ 64 <2323200000>;
   opp-peak-kBps = <8368000 51609600>;
  };

  cpu4_opp17: opp-2419200000 {
   opp-hz = /bits/ 64 <2419200000>;
   opp-peak-kBps = <8368000 51609600>;
  };
 };

 cpu7_opp_table: opp-table-cpu7 {
  compatible = "operating-points-v2";
  opp-shared;

  cpu7_opp1: opp-825600000 {
   opp-hz = /bits/ 64 <825600000>;
   opp-peak-kBps = <2188000 19660800>;
  };

  cpu7_opp2: opp-940800000 {
   opp-hz = /bits/ 64 <940800000>;
   opp-peak-kBps = <2188000 22732800>;
  };

  cpu7_opp3: opp-1056000000 {
   opp-hz = /bits/ 64 <1056000000>;
   opp-peak-kBps = <3072000 25804800>;
  };

  cpu7_opp4: opp-1171200000 {
   opp-hz = /bits/ 64 <1171200000>;
   opp-peak-kBps = <3072000 31948800>;
  };

  cpu7_opp5: opp-1286400000 {
   opp-hz = /bits/ 64 <1286400000>;
   opp-peak-kBps = <4068000 31948800>;
  };

  cpu7_opp6: opp-1401600000 {
   opp-hz = /bits/ 64 <1401600000>;
   opp-peak-kBps = <4068000 31948800>;
  };

  cpu7_opp7: opp-1497600000 {
   opp-hz = /bits/ 64 <1497600000>;
   opp-peak-kBps = <4068000 40550400>;
  };

  cpu7_opp8: opp-1612800000 {
   opp-hz = /bits/ 64 <1612800000>;
   opp-peak-kBps = <4068000 40550400>;
  };

  cpu7_opp9: opp-1708800000 {
   opp-hz = /bits/ 64 <1708800000>;
   opp-peak-kBps = <4068000 43008000>;
  };

  cpu7_opp10: opp-1804800000 {
   opp-hz = /bits/ 64 <1804800000>;
   opp-peak-kBps = <6220000 43008000>;
  };

  cpu7_opp11: opp-1920000000 {
   opp-hz = /bits/ 64 <1920000000>;
   opp-peak-kBps = <6220000 49152000>;
  };

  cpu7_opp12: opp-2016000000 {
   opp-hz = /bits/ 64 <2016000000>;
   opp-peak-kBps = <7216000 49152000>;
  };

  cpu7_opp13: opp-2131200000 {
   opp-hz = /bits/ 64 <2131200000>;
   opp-peak-kBps = <8368000 49152000>;
  };

  cpu7_opp14: opp-2227200000 {
   opp-hz = /bits/ 64 <2227200000>;
   opp-peak-kBps = <8368000 51609600>;
  };

  cpu7_opp15: opp-2323200000 {
   opp-hz = /bits/ 64 <2323200000>;
   opp-peak-kBps = <8368000 51609600>;
  };

  cpu7_opp16: opp-2419200000 {
   opp-hz = /bits/ 64 <2419200000>;
   opp-peak-kBps = <8368000 51609600>;
  };

  cpu7_opp17: opp-2534400000 {
   opp-hz = /bits/ 64 <2534400000>;
   opp-peak-kBps = <8368000 51609600>;
  };

  cpu7_opp18: opp-2649600000 {
   opp-hz = /bits/ 64 <2649600000>;
   opp-peak-kBps = <8368000 51609600>;
  };

  cpu7_opp19: opp-2745600000 {
   opp-hz = /bits/ 64 <2745600000>;
   opp-peak-kBps = <8368000 51609600>;
  };

  cpu7_opp20: opp-2841600000 {
   opp-hz = /bits/ 64 <2841600000>;
   opp-peak-kBps = <8368000 51609600>;
  };
 };

 firmware {
  scm: scm {
   compatible = "qcom,scm-sm8150", "qcom,scm";
   #reset-cells = <1>;
  };
 };

 memory@80000000 {
  device_type = "memory";
  /* We expect the bootloader to fill in the size */
  reg = <0x0 0x80000000 0x0 0x0>;
 };

 pmu {
  compatible = "arm,armv8-pmuv3";
  interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
 };

 psci {
  compatible = "arm,psci-1.0";
  method = "smc";

  cpu_pd0: power-domain-cpu0 {
   #power-domain-cells = <0>;
   power-domains = <&cluster_pd>;
   domain-idle-states = <&little_cpu_sleep_0>;
  };

  cpu_pd1: power-domain-cpu1 {
   #power-domain-cells = <0>;
   power-domains = <&cluster_pd>;
   domain-idle-states = <&little_cpu_sleep_0>;
  };

  cpu_pd2: power-domain-cpu2 {
   #power-domain-cells = <0>;
   power-domains = <&cluster_pd>;
   domain-idle-states = <&little_cpu_sleep_0>;
  };

  cpu_pd3: power-domain-cpu3 {
   #power-domain-cells = <0>;
   power-domains = <&cluster_pd>;
   domain-idle-states = <&little_cpu_sleep_0>;
  };

  cpu_pd4: power-domain-cpu4 {
   #power-domain-cells = <0>;
   power-domains = <&cluster_pd>;
   domain-idle-states = <&big_cpu_sleep_0>;
  };

  cpu_pd5: power-domain-cpu5 {
   #power-domain-cells = <0>;
   power-domains = <&cluster_pd>;
   domain-idle-states = <&big_cpu_sleep_0>;
  };

  cpu_pd6: power-domain-cpu6 {
   #power-domain-cells = <0>;
   power-domains = <&cluster_pd>;
   domain-idle-states = <&big_cpu_sleep_0>;
  };

  cpu_pd7: power-domain-cpu7 {
   #power-domain-cells = <0>;
   power-domains = <&cluster_pd>;
   domain-idle-states = <&big_cpu_sleep_0>;
  };

  cluster_pd: power-domain-cpu-cluster0 {
   #power-domain-cells = <0>;
   domain-idle-states = <&cluster_sleep_0>;
  };
 };

 reserved-memory {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;

  hyp_mem: memory@85700000 {
   reg = <0x0 0x85700000 0x0 0x600000>;
   no-map;
  };

  xbl_mem: memory@85d00000 {
   reg = <0x0 0x85d00000 0x0 0x140000>;
   no-map;
  };

  aop_mem: memory@85f00000 {
   reg = <0x0 0x85f00000 0x0 0x20000>;
   no-map;
  };

  aop_cmd_db: memory@85f20000 {
   compatible = "qcom,cmd-db";
   reg = <0x0 0x85f20000 0x0 0x20000>;
   no-map;
  };

  smem_mem: memory@86000000 {
   reg = <0x0 0x86000000 0x0 0x200000>;
   no-map;
  };

  tz_mem: memory@86200000 {
   reg = <0x0 0x86200000 0x0 0x3900000>;
   no-map;
  };

  rmtfs_mem: memory@89b00000 {
   compatible = "qcom,rmtfs-mem";
   reg = <0x0 0x89b00000 0x0 0x200000>;
   no-map;

   qcom,client-id = <1>;
   qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
  };

  camera_mem: memory@8b700000 {
   reg = <0x0 0x8b700000 0x0 0x500000>;
   no-map;
  };

  wlan_mem: memory@8bc00000 {
   reg = <0x0 0x8bc00000 0x0 0x180000>;
   no-map;
  };

  npu_mem: memory@8bd80000 {
   reg = <0x0 0x8bd80000 0x0 0x80000>;
   no-map;
  };

  adsp_mem: memory@8be00000 {
   reg = <0x0 0x8be00000 0x0 0x1a00000>;
   no-map;
  };

  mpss_mem: memory@8d800000 {
   reg = <0x0 0x8d800000 0x0 0x9600000>;
   no-map;
  };

  venus_mem: memory@96e00000 {
   reg = <0x0 0x96e00000 0x0 0x500000>;
   no-map;
  };

  slpi_mem: memory@97300000 {
   reg = <0x0 0x97300000 0x0 0x1400000>;
   no-map;
  };

  ipa_fw_mem: memory@98700000 {
   reg = <0x0 0x98700000 0x0 0x10000>;
   no-map;
  };

  ipa_gsi_mem: memory@98710000 {
   reg = <0x0 0x98710000 0x0 0x5000>;
   no-map;
  };

  gpu_mem: memory@98715000 {
   reg = <0x0 0x98715000 0x0 0x2000>;
   no-map;
  };

  spss_mem: memory@98800000 {
   reg = <0x0 0x98800000 0x0 0x100000>;
   no-map;
  };

  cdsp_mem: memory@98900000 {
   reg = <0x0 0x98900000 0x0 0x1400000>;
   no-map;
  };

  qseecom_mem: memory@9e400000 {
   reg = <0x0 0x9e400000 0x0 0x1400000>;
   no-map;
  };
 };

 smem {
  compatible = "qcom,smem";
  memory-region = <&smem_mem>;
  hwlocks = <&tcsr_mutex 3>;
 };

 smp2p-cdsp {
  compatible = "qcom,smp2p";
  qcom,smem = <94>, <432>;

  interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;

  mboxes = <&apss_shared 6>;

  qcom,local-pid = <0>;
  qcom,remote-pid = <5>;

  cdsp_smp2p_out: master-kernel {
   qcom,entry-name = "master-kernel";
   #qcom,smem-state-cells = <1>;
  };

  cdsp_smp2p_in: slave-kernel {
   qcom,entry-name = "slave-kernel";

   interrupt-controller;
   #interrupt-cells = <2>;
  };
 };

 smp2p-lpass {
  compatible = "qcom,smp2p";
  qcom,smem = <443>, <429>;

  interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;

  mboxes = <&apss_shared 10>;

  qcom,local-pid = <0>;
  qcom,remote-pid = <2>;

  adsp_smp2p_out: master-kernel {
   qcom,entry-name = "master-kernel";
   #qcom,smem-state-cells = <1>;
  };

  adsp_smp2p_in: slave-kernel {
   qcom,entry-name = "slave-kernel";

   interrupt-controller;
   #interrupt-cells = <2>;
  };
 };

 smp2p-mpss {
  compatible = "qcom,smp2p";
  qcom,smem = <435>, <428>;

  interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;

  mboxes = <&apss_shared 14>;

  qcom,local-pid = <0>;
  qcom,remote-pid = <1>;

  modem_smp2p_out: master-kernel {
   qcom,entry-name = "master-kernel";
   #qcom,smem-state-cells = <1>;
  };

  modem_smp2p_in: slave-kernel {
   qcom,entry-name = "slave-kernel";

   interrupt-controller;
   #interrupt-cells = <2>;
  };
 };

 smp2p-slpi {
  compatible = "qcom,smp2p";
  qcom,smem = <481>, <430>;

  interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;

  mboxes = <&apss_shared 26>;

  qcom,local-pid = <0>;
  qcom,remote-pid = <3>;

  slpi_smp2p_out: master-kernel {
   qcom,entry-name = "master-kernel";
   #qcom,smem-state-cells = <1>;
  };

  slpi_smp2p_in: slave-kernel {
   qcom,entry-name = "slave-kernel";

   interrupt-controller;
   #interrupt-cells = <2>;
  };
 };

 soc: soc@0 {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges = <0 0 0 0 0x10 0>;
  dma-ranges = <0 0 0 0 0x10 0>;
  compatible = "simple-bus";

  gcc: clock-controller@100000 {
   compatible = "qcom,gcc-sm8150";
   reg = <0x0 0x00100000 0x0 0x1f0000>;
   #clock-cells = <1>;
   #reset-cells = <1>;
   #power-domain-cells = <1>;
   clock-names = "bi_tcxo",
          "sleep_clk";
   clocks = <&rpmhcc RPMH_CXO_CLK>,
     <&sleep_clk>;
  };

  gpi_dma0: dma-controller@800000 {
   compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
   reg = <0 0x00800000 0 0x60000>;
   interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
   dma-channels = <13>;
   dma-channel-mask = <0xfa>;
   iommus = <&apps_smmu 0x00d6 0x0>;
   #dma-cells = <3>;
   status = "disabled";
  };

  ethernet: ethernet@20000 {
   compatible = "qcom,sm8150-ethqos";
   reg = <0x0 0x00020000 0x0 0x10000>,
         <0x0 0x00036000 0x0 0x100>;
   reg-names = "stmmaceth", "rgmii";
   clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
   clocks = <&gcc GCC_EMAC_AXI_CLK>,
    <&gcc GCC_EMAC_SLV_AHB_CLK>,
    <&gcc GCC_EMAC_PTP_CLK>,
    <&gcc GCC_EMAC_RGMII_CLK>;
   interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-names = "macirq", "eth_lpi";

   power-domains = <&gcc EMAC_GDSC>;
   resets = <&gcc GCC_EMAC_BCR>;

   iommus = <&apps_smmu 0x3c0 0x0>;

   snps,tso;
   rx-fifo-depth = <4096>;
   tx-fifo-depth = <4096>;

   status = "disabled";
  };

  qfprom: efuse@784000 {
   compatible = "qcom,sm8150-qfprom", "qcom,qfprom";
   reg = <0 0x00784000 0 0x8ff>;
   #address-cells = <1>;
   #size-cells = <1>;

   gpu_speed_bin: gpu-speed-bin@133 {
    reg = <0x133 0x1>;
    bits = <5 3>;
   };
  };

  qupv3_id_0: geniqup@8c0000 {
   compatible = "qcom,geni-se-qup";
   reg = <0x0 0x008c0000 0x0 0x6000>;
   clock-names = "m-ahb", "s-ahb";
   clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
     <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
   iommus = <&apps_smmu 0xc3 0x0>;
   #address-cells = <2>;
   #size-cells = <2>;
   ranges;
   status = "disabled";

   i2c0: i2c@880000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00880000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
    dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
           <&gpi_dma0 1 0 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c0_default>;
    interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi0: spi@880000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00880000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
    dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
           <&gpi_dma0 1 0 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi0_default>;
    interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c1: i2c@884000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00884000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
    dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
           <&gpi_dma0 1 1 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c1_default>;
    interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi1: spi@884000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00884000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
    dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
           <&gpi_dma0 1 1 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi1_default>;
    interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c2: i2c@888000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00888000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
    dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
           <&gpi_dma0 1 2 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c2_default>;
    interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi2: spi@888000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00888000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
    dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
           <&gpi_dma0 1 2 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi2_default>;
    interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c3: i2c@88c000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x0088c000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
    dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
           <&gpi_dma0 1 3 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c3_default>;
    interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi3: spi@88c000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x0088c000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
    dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
           <&gpi_dma0 1 3 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi3_default>;
    interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c4: i2c@890000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00890000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
    dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
           <&gpi_dma0 1 4 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c4_default>;
    interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi4: spi@890000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00890000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
    dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
           <&gpi_dma0 1 4 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi4_default>;
    interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c5: i2c@894000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00894000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
    dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
           <&gpi_dma0 1 5 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c5_default>;
    interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi5: spi@894000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00894000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
    dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
           <&gpi_dma0 1 5 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi5_default>;
    interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c6: i2c@898000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00898000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
    dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
           <&gpi_dma0 1 6 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c6_default>;
    interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi6: spi@898000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00898000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
    dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
           <&gpi_dma0 1 6 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi6_default>;
    interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c7: i2c@89c000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x0089c000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
    dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
           <&gpi_dma0 1 7 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c7_default>;
    interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi7: spi@89c000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x0089c000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
    dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
           <&gpi_dma0 1 7 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi7_default>;
    interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };
  };

  gpi_dma1: dma-controller@a00000 {
   compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
   reg = <0 0x00a00000 0 0x60000>;
   interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
   dma-channels = <13>;
   dma-channel-mask = <0xfa>;
   iommus = <&apps_smmu 0x0616 0x0>;
   #dma-cells = <3>;
   status = "disabled";
  };

  qupv3_id_1: geniqup@ac0000 {
   compatible = "qcom,geni-se-qup";
   reg = <0x0 0x00ac0000 0x0 0x6000>;
   clock-names = "m-ahb", "s-ahb";
   clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
     <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
   iommus = <&apps_smmu 0x603 0x0>;
   #address-cells = <2>;
   #size-cells = <2>;
   ranges;
   status = "disabled";

   i2c8: i2c@a80000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00a80000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
    dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
           <&gpi_dma1 1 0 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c8_default>;
    interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi8: spi@a80000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00a80000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
    dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
           <&gpi_dma1 1 0 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi8_default>;
    interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c9: i2c@a84000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00a84000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
    dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
           <&gpi_dma1 1 1 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c9_default>;
    interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi9: spi@a84000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00a84000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
    dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
           <&gpi_dma1 1 1 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi9_default>;
    interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   uart9: serial@a84000 {
    compatible = "qcom,geni-uart";
    reg = <0x0 0x00a84000 0x0 0x4000>;
    clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
    clock-names = "se";
    pinctrl-0 = <&qup_uart9_default>;
    pinctrl-names = "default";
    interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
    status = "disabled";
   };

   i2c10: i2c@a88000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00a88000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
    dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
           <&gpi_dma1 1 2 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c10_default>;
    interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi10: spi@a88000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00a88000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
    dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
           <&gpi_dma1 1 2 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi10_default>;
    interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c11: i2c@a8c000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00a8c000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
    dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
           <&gpi_dma1 1 3 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c11_default>;
    interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi11: spi@a8c000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00a8c000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
    dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
           <&gpi_dma1 1 3 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi11_default>;
    interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   uart2: serial@a90000 {
    compatible = "qcom,geni-debug-uart";
    reg = <0x0 0x00a90000 0x0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
    interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
    status = "disabled";
   };

   i2c12: i2c@a90000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00a90000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
    dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
           <&gpi_dma1 1 4 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c12_default>;
    interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi12: spi@a90000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00a90000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
    dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
           <&gpi_dma1 1 4 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi12_default>;
    interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c16: i2c@94000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00094000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
    dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
           <&gpi_dma2 1 5 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c16_default>;
    interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi16: spi@a94000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00a94000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
    dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
           <&gpi_dma2 1 5 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi16_default>;
    interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };
  };

  gpi_dma2: dma-controller@c00000 {
   compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
   reg = <0 0x00c00000 0 0x60000>;
   interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
   dma-channels = <13>;
   dma-channel-mask = <0xfa>;
   iommus = <&apps_smmu 0x07b6 0x0>;
   #dma-cells = <3>;
   status = "disabled";
  };

  qupv3_id_2: geniqup@cc0000 {
   compatible = "qcom,geni-se-qup";
   reg = <0x0 0x00cc0000 0x0 0x6000>;

   clock-names = "m-ahb", "s-ahb";
   clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
     <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
   iommus = <&apps_smmu 0x7a3 0x0>;
   #address-cells = <2>;
   #size-cells = <2>;
   ranges;
   status = "disabled";

   i2c17: i2c@c80000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00c80000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
    dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
           <&gpi_dma2 1 0 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c17_default>;
    interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi17: spi@c80000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00c80000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
    dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
           <&gpi_dma2 1 0 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi17_default>;
    interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c18: i2c@c84000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00c84000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
    dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
           <&gpi_dma2 1 1 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c18_default>;
    interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi18: spi@c84000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00c84000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
    dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
           <&gpi_dma2 1 1 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi18_default>;
    interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c19: i2c@c88000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00c88000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
    dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
           <&gpi_dma2 1 2 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c19_default>;
    interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi19: spi@c88000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00c88000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
    dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
           <&gpi_dma2 1 2 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi19_default>;
    interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c13: i2c@c8c000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00c8c000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
    dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
           <&gpi_dma2 1 3 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c13_default>;
    interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi13: spi@c8c000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00c8c000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
    dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
           <&gpi_dma2 1 3 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi13_default>;
    interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c14: i2c@c90000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00c90000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
    dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
           <&gpi_dma2 1 4 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c14_default>;
    interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi14: spi@c90000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00c90000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
    dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
           <&gpi_dma2 1 4 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi14_default>;
    interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   i2c15: i2c@c94000 {
    compatible = "qcom,geni-i2c";
    reg = <0 0x00c94000 0 0x4000>;
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
    dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
           <&gpi_dma2 1 5 QCOM_GPI_I2C>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_i2c15_default>;
    interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };

   spi15: spi@c94000 {
    compatible = "qcom,geni-spi";
    reg = <0 0x00c94000 0 0x4000>;
    reg-names = "se";
    clock-names = "se";
    clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
    dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
           <&gpi_dma2 1 5 QCOM_GPI_SPI>;
    dma-names = "tx", "rx";
    pinctrl-names = "default";
    pinctrl-0 = <&qup_spi15_default>;
    interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
    spi-max-frequency = <50000000>;
    #address-cells = <1>;
    #size-cells = <0>;
    status = "disabled";
   };
  };

  config_noc: interconnect@1500000 {
   compatible = "qcom,sm8150-config-noc";
   reg = <0 0x01500000 0 0x7400>;
   #interconnect-cells = <2>;
   qcom,bcm-voters = <&apps_bcm_voter>;
  };

  system_noc: interconnect@1620000 {
   compatible = "qcom,sm8150-system-noc";
   reg = <0 0x01620000 0 0x19400>;
   #interconnect-cells = <2>;
   qcom,bcm-voters = <&apps_bcm_voter>;
  };

  mc_virt: interconnect@163a000 {
   compatible = "qcom,sm8150-mc-virt";
   reg = <0 0x0163a000 0 0x1000>;
   #interconnect-cells = <2>;
   qcom,bcm-voters = <&apps_bcm_voter>;
  };

  aggre1_noc: interconnect@16e0000 {
   compatible = "qcom,sm8150-aggre1-noc";
   reg = <0 0x016e0000 0 0xd080>;
   #interconnect-cells = <2>;
   qcom,bcm-voters = <&apps_bcm_voter>;
  };

  aggre2_noc: interconnect@1700000 {
   compatible = "qcom,sm8150-aggre2-noc";
   reg = <0 0x01700000 0 0x20000>;
   #interconnect-cells = <2>;
   qcom,bcm-voters = <&apps_bcm_voter>;
  };

  compute_noc: interconnect@1720000 {
   compatible = "qcom,sm8150-compute-noc";
   reg = <0 0x01720000 0 0x7000>;
   #interconnect-cells = <2>;
   qcom,bcm-voters = <&apps_bcm_voter>;
  };

  mmss_noc: interconnect@1740000 {
   compatible = "qcom,sm8150-mmss-noc";
   reg = <0 0x01740000 0 0x1c100>;
   #interconnect-cells = <2>;
   qcom,bcm-voters = <&apps_bcm_voter>;
  };

  system-cache-controller@9200000 {
   compatible = "qcom,sm8150-llcc";
   reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
         <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
         <0 0x09600000 0 0x50000>;
   reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
        "llcc3_base", "llcc_broadcast_base";
   interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
  };

  dma@10a2000 {
   compatible = "qcom,sm8150-dcc", "qcom,dcc";
   reg = <0x0 0x010a2000 0x0 0x1000>,
         <0x0 0x010ad000 0x0 0x3000>;
  };

  pcie0: pcie@1c00000 {
   compatible = "qcom,pcie-sm8150";
   reg = <0 0x01c00000 0 0x3000>,
         <0 0x60000000 0 0xf1d>,
         <0 0x60000f20 0 0xa8>,
         <0 0x60001000 0 0x1000>,
         <0 0x60100000 0 0x100000>;
   reg-names = "parf", "dbi", "elbi", "atu", "config";
   device_type = "pci";
   linux,pci-domain = <0>;
   bus-range = <0x00 0xff>;
   num-lanes = <1>;

   #address-cells = <3>;
   #size-cells = <2>;

   ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;

   interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-names = "msi0",
       "msi1",
       "msi2",
       "msi3",
       "msi4",
       "msi5",
       "msi6",
       "msi7",
       "global";
   #interrupt-cells = <1>;
   interrupt-map-mask = <0 0 0 0x7>;
   interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
     <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
     <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
     <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */

   clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
     <&gcc GCC_PCIE_0_AUX_CLK>,
     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
   clock-names = "pipe",
          "aux",
          "cfg",
          "bus_master",
          "bus_slave",
          "slave_q2a";

   iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
        <0x100 &apps_smmu 0x1d81 0x1>;

   resets = <&gcc GCC_PCIE_0_BCR>;
   reset-names = "pci";

   power-domains = <&gcc PCIE_0_GDSC>;

   phys = <&pcie0_phy>;
   phy-names = "pciephy";

   perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
   wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;

   pinctrl-names = "default";
   pinctrl-0 = <&pcie0_default_state>;

   status = "disabled";

   pcie@0 {
    device_type = "pci";
    reg = <0x0 0x0 0x0 0x0 0x0>;
    bus-range = <0x01 0xff>;

    #address-cells = <3>;
    #size-cells = <2>;
    ranges;
   };
  };

  pcie0_phy: phy@1c06000 {
   compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy";
   reg = <0 0x01c06000 0 0x1000>;
   clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
     <&gcc GCC_PCIE_0_CLKREF_CLK>,
     <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
     <&gcc GCC_PCIE_0_PIPE_CLK>;
   clock-names = "aux",
          "cfg_ahb",
          "ref",
          "refgen",
          "pipe";

   clock-output-names = "pcie_0_pipe_clk";
   #clock-cells = <0>;

   #phy-cells = <0>;

   resets = <&gcc GCC_PCIE_0_PHY_BCR>;
   reset-names = "phy";

   assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
   assigned-clock-rates = <100000000>;

   status = "disabled";
  };

  pcie1: pcie@1c08000 {
   compatible = "qcom,pcie-sm8150";
   reg = <0 0x01c08000 0 0x3000>,
         <0 0x40000000 0 0xf1d>,
         <0 0x40000f20 0 0xa8>,
         <0 0x40001000 0 0x1000>,
         <0 0x40100000 0 0x100000>;
   reg-names = "parf", "dbi", "elbi", "atu", "config";
   device_type = "pci";
   linux,pci-domain = <1>;
   bus-range = <0x00 0xff>;
   num-lanes = <2>;

   #address-cells = <3>;
   #size-cells = <2>;

   ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
     <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;

   interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-names = "msi0",
       "msi1",
       "msi2",
       "msi3",
       "msi4",
       "msi5",
       "msi6",
       "msi7",
       "global";
   #interrupt-cells = <1>;
   interrupt-map-mask = <0 0 0 0x7>;
   interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
     <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
     <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
     <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */

   clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
     <&gcc GCC_PCIE_1_AUX_CLK>,
     <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
     <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
     <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
     <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
   clock-names = "pipe",
          "aux",
          "cfg",
          "bus_master",
          "bus_slave",
          "slave_q2a";

   assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
   assigned-clock-rates = <19200000>;

   iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
        <0x100 &apps_smmu 0x1e01 0x1>;

   resets = <&gcc GCC_PCIE_1_BCR>;
   reset-names = "pci";

   power-domains = <&gcc PCIE_1_GDSC>;

   phys = <&pcie1_phy>;
   phy-names = "pciephy";

   perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
   enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;

   pinctrl-names = "default";
   pinctrl-0 = <&pcie1_default_state>;

   status = "disabled";

   pcie@0 {
    device_type = "pci";
    reg = <0x0 0x0 0x0 0x0 0x0>;
    bus-range = <0x01 0xff>;

    #address-cells = <3>;
    #size-cells = <2>;
    ranges;
   };
  };

  pcie1_phy: phy@1c0e000 {
   compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy";
   reg = <0 0x01c0e000 0 0x1000>;
   clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
     <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
     <&gcc GCC_PCIE_1_CLKREF_CLK>,
     <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
     <&gcc GCC_PCIE_1_PIPE_CLK>;
   clock-names = "aux",
          "cfg_ahb",
          "ref",
          "refgen",
          "pipe";

   clock-output-names = "pcie_1_pipe_clk";
   #clock-cells = <0>;

   #phy-cells = <0>;

   resets = <&gcc GCC_PCIE_1_PHY_BCR>;
   reset-names = "phy";

   assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
   assigned-clock-rates = <100000000>;

   status = "disabled";
  };

  ufs_mem_hc: ufshc@1d84000 {
   compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
         "jedec,ufs-2.0";
   reg = <0 0x01d84000 0 0x2500>,
         <0 0x01d90000 0 0x8000>;
   reg-names = "std", "ice";
   interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
   phys = <&ufs_mem_phy>;
   phy-names = "ufsphy";
   lanes-per-direction = <2>;
   #reset-cells = <1>;
   resets = <&gcc GCC_UFS_PHY_BCR>;
   reset-names = "rst";

   iommus = <&apps_smmu 0x300 0>;

   clock-names =
    "core_clk",
    "bus_aggr_clk",
    "iface_clk",
    "core_clk_unipro",
    "ref_clk",
    "tx_lane0_sync_clk",
    "rx_lane0_sync_clk",
    "rx_lane1_sync_clk",
    "ice_core_clk";
   clocks =
    <&gcc GCC_UFS_PHY_AXI_CLK>,
    <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
    <&gcc GCC_UFS_PHY_AHB_CLK>,
    <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
    <&rpmhcc RPMH_CXO_CLK>,
    <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
    <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
    <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
    <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
   freq-table-hz =
    <37500000 300000000>,
    <0 0>,
    <0 0>,
    <37500000 300000000>,
    <0 0>,
    <0 0>,
    <0 0>,
    <0 0>,
    <0 300000000>;

   status = "disabled";
  };

  ufs_mem_phy: phy@1d87000 {
   compatible = "qcom,sm8150-qmp-ufs-phy";
   reg = <0 0x01d87000 0 0x1000>;

   clocks = <&rpmhcc RPMH_CXO_CLK>,
     <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
     <&gcc GCC_UFS_MEM_CLKREF_CLK>;
   clock-names = "ref",
          "ref_aux",
          "qref";

   power-domains = <&gcc UFS_PHY_GDSC>;

   resets = <&ufs_mem_hc 0>;
   reset-names = "ufsphy";

   #phy-cells = <0>;

   status = "disabled";
  };

  cryptobam: dma-controller@1dc4000 {
   compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
   reg = <0 0x01dc4000 0 0x24000>;
   interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
   #dma-cells = <1>;
   qcom,ee = <0>;
   qcom,controlled-remotely;
   num-channels = <8>;
   qcom,num-ees = <2>;
   iommus = <&apps_smmu 0x502 0x0641>,
     <&apps_smmu 0x504 0x0011>,
     <&apps_smmu 0x506 0x0011>,
     <&apps_smmu 0x508 0x0011>,
     <&apps_smmu 0x512 0x0000>;
  };

  crypto: crypto@1dfa000 {
   compatible = "qcom,sm8150-qce", "qcom,qce";
   reg = <0 0x01dfa000 0 0x6000>;
   dmas = <&cryptobam 4>, <&cryptobam 5>;
   dma-names = "rx", "tx";
   iommus = <&apps_smmu 0x502 0x0641>,
     <&apps_smmu 0x504 0x0011>,
     <&apps_smmu 0x506 0x0011>,
     <&apps_smmu 0x508 0x0011>,
     <&apps_smmu 0x512 0x0000>;
   interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>;
   interconnect-names = "memory";
  };

  tcsr_mutex: hwlock@1f40000 {
   compatible = "qcom,tcsr-mutex";
   reg = <0x0 0x01f40000 0x0 0x20000>;
   #hwlock-cells = <1>;
  };

  tcsr_regs_1: syscon@1f60000 {
   compatible = "qcom,sm8150-tcsr", "syscon";
   reg = <0x0 0x01f60000 0x0 0x20000>;
  };

  remoteproc_slpi: remoteproc@2400000 {
   compatible = "qcom,sm8150-slpi-pas";
   reg = <0x0 0x02400000 0x0 0x4040>;

   interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
           <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
           <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
           <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
           <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
   interrupt-names = "wdog", "fatal", "ready",
       "handover", "stop-ack";

   clocks = <&rpmhcc RPMH_CXO_CLK>;
   clock-names = "xo";

   power-domains = <&rpmhpd SM8150_LCX>,
     <&rpmhpd SM8150_LMX>;
   power-domain-names = "lcx", "lmx";

   memory-region = <&slpi_mem>;

   qcom,qmp = <&aoss_qmp>;

   qcom,smem-states = <&slpi_smp2p_out 0>;
   qcom,smem-state-names = "stop";

   status = "disabled";

   glink-edge {
    interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
    label = "dsps";
    qcom,remote-pid = <3>;
    mboxes = <&apss_shared 24>;

    fastrpc {
     compatible = "qcom,fastrpc";
     qcom,glink-channels = "fastrpcglink-apps-dsp";
     label = "sdsp";
     qcom,non-secure-domain;
     #address-cells = <1>;
     #size-cells = <0>;

     compute-cb@1 {
      compatible = "qcom,fastrpc-compute-cb";
      reg = <1>;
      iommus = <&apps_smmu 0x05a1 0x0>;
     };

     compute-cb@2 {
      compatible = "qcom,fastrpc-compute-cb";
      reg = <2>;
      iommus = <&apps_smmu 0x05a2 0x0>;
     };

     compute-cb@3 {
      compatible = "qcom,fastrpc-compute-cb";
      reg = <3>;
      iommus = <&apps_smmu 0x05a3 0x0>;
      /* note: shared-cb = <4> in downstream */
     };
    };
   };
  };

  gpu: gpu@2c00000 {
   compatible = "qcom,adreno-640.1", "qcom,adreno";
   reg = <0 0x02c00000 0 0x40000>;
   reg-names = "kgsl_3d0_reg_memory";

   interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;

   iommus = <&adreno_smmu 0 0x401>;

   operating-points-v2 = <&gpu_opp_table>;

   qcom,gmu = <&gmu>;

   nvmem-cells = <&gpu_speed_bin>;
   nvmem-cell-names = "speed_bin";
   #cooling-cells = <2>;

   status = "disabled";

   zap-shader {
    memory-region = <&gpu_mem>;
   };

   gpu_opp_table: opp-table {
    compatible = "operating-points-v2";

    opp-675000000 {
     opp-hz = /bits/ 64 <675000000>;
     opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
     opp-supported-hw = <0x2>;
    };

    opp-585000000 {
     opp-hz = /bits/ 64 <585000000>;
     opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
     opp-supported-hw = <0x3>;
    };

    opp-499200000 {
     opp-hz = /bits/ 64 <499200000>;
     opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
     opp-supported-hw = <0x3>;
    };

    opp-427000000 {
     opp-hz = /bits/ 64 <427000000>;
     opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
     opp-supported-hw = <0x3>;
    };

    opp-345000000 {
     opp-hz = /bits/ 64 <345000000>;
     opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
     opp-supported-hw = <0x3>;
    };

    opp-257000000 {
     opp-hz = /bits/ 64 <257000000>;
     opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
     opp-supported-hw = <0x3>;
    };
   };
  };

  gmu: gmu@2c6a000 {
   compatible = "qcom,adreno-gmu-640.1", "qcom,adreno-gmu";

   reg = <0 0x02c6a000 0 0x30000>,
         <0 0x0b290000 0 0x10000>,
         <0 0x0b490000 0 0x10000>;
   reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";

   interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-names = "hfi", "gmu";

   clocks = <&gpucc GPU_CC_AHB_CLK>,
     <&gpucc GPU_CC_CX_GMU_CLK>,
     <&gpucc GPU_CC_CXO_CLK>,
     <&gcc GCC_DDRSS_GPU_AXI_CLK>,
     <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
   clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";

   power-domains = <&gpucc GPU_CX_GDSC>,
     <&gpucc GPU_GX_GDSC>;
   power-domain-names = "cx", "gx";

   iommus = <&adreno_smmu 5 0x400>;

   operating-points-v2 = <&gmu_opp_table>;

   status = "disabled";

   gmu_opp_table: opp-table {
    compatible = "operating-points-v2";

    opp-200000000 {
     opp-hz = /bits/ 64 <200000000>;
     opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
    };
   };
  };

  gpucc: clock-controller@2c90000 {
   compatible = "qcom,sm8150-gpucc";
   reg = <0 0x02c90000 0 0x9000>;
   clocks = <&rpmhcc RPMH_CXO_CLK>,
     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
   clock-names = "bi_tcxo",
          "gcc_gpu_gpll0_clk_src",
          "gcc_gpu_gpll0_div_clk_src";
   #clock-cells = <1>;
   #reset-cells = <1>;
   #power-domain-cells = <1>;
  };

  adreno_smmu: iommu@2ca0000 {
   compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu",
         "qcom,smmu-500", "arm,mmu-500";
   reg = <0 0x02ca0000 0 0x10000>;
   #iommu-cells = <2>;
   #global-interrupts = <1>;
   interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
    <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
    <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
    <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
    <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
    <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
    <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
    <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
    <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>;
   clocks = <&gpucc GPU_CC_AHB_CLK>,
     <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
     <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
   clock-names = "ahb", "bus", "iface";

   power-domains = <&gpucc GPU_CX_GDSC>;
  };

  tlmm: pinctrl@3100000 {
   compatible = "qcom,sm8150-pinctrl";
   reg = <0x0 0x03100000 0x0 0x300000>,
         <0x0 0x03500000 0x0 0x300000>,
         <0x0 0x03900000 0x0 0x300000>,
         <0x0 0x03D00000 0x0 0x300000>;
   reg-names = "west", "east", "north", "south";
   interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
   gpio-ranges = <&tlmm 0 0 176>;
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
   wakeup-parent = <&pdc>;

   qup_i2c0_default: qup-i2c0-default-state {
    pins = "gpio0", "gpio1";
    function = "qup0";
    drive-strength = <0x02>;
    bias-disable;
   };

   qup_spi0_default: qup-spi0-default-state {
    pins = "gpio0", "gpio1", "gpio2", "gpio3";
    function = "qup0";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c1_default: qup-i2c1-default-state {
    pins = "gpio114", "gpio115";
    function = "qup1";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi1_default: qup-spi1-default-state {
    pins = "gpio114", "gpio115", "gpio116", "gpio117";
    function = "qup1";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c2_default: qup-i2c2-default-state {
    pins = "gpio126", "gpio127";
    function = "qup2";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi2_default: qup-spi2-default-state {
    pins = "gpio126", "gpio127", "gpio128", "gpio129";
    function = "qup2";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c3_default: qup-i2c3-default-state {
    pins = "gpio144", "gpio145";
    function = "qup3";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi3_default: qup-spi3-default-state {
    pins = "gpio144", "gpio145", "gpio146", "gpio147";
    function = "qup3";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c4_default: qup-i2c4-default-state {
    pins = "gpio51", "gpio52";
    function = "qup4";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi4_default: qup-spi4-default-state {
    pins = "gpio51", "gpio52", "gpio53", "gpio54";
    function = "qup4";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c5_default: qup-i2c5-default-state {
    pins = "gpio121", "gpio122";
    function = "qup5";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi5_default: qup-spi5-default-state {
    pins = "gpio119", "gpio120", "gpio121", "gpio122";
    function = "qup5";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c6_default: qup-i2c6-default-state {
    pins = "gpio6", "gpio7";
    function = "qup6";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi6_default: qup-spi6-default-state {
    pins = "gpio4", "gpio5", "gpio6", "gpio7";
    function = "qup6";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c7_default: qup-i2c7-default-state {
    pins = "gpio98", "gpio99";
    function = "qup7";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi7_default: qup-spi7-default-state {
    pins = "gpio98", "gpio99", "gpio100", "gpio101";
    function = "qup7";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c8_default: qup-i2c8-default-state {
    pins = "gpio88", "gpio89";
    function = "qup8";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi8_default: qup-spi8-default-state {
    pins = "gpio88", "gpio89", "gpio90", "gpio91";
    function = "qup8";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c9_default: qup-i2c9-default-state {
    pins = "gpio39", "gpio40";
    function = "qup9";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi9_default: qup-spi9-default-state {
    pins = "gpio39", "gpio40", "gpio41", "gpio42";
    function = "qup9";
    drive-strength = <6>;
    bias-disable;
   };

   qup_uart9_default: qup-uart9-default-state {
    pins = "gpio41", "gpio42";
    function = "qup9";
    drive-strength = <2>;
    bias-disable;
   };

   qup_i2c10_default: qup-i2c10-default-state {
    pins = "gpio9", "gpio10";
    function = "qup10";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi10_default: qup-spi10-default-state {
    pins = "gpio9", "gpio10", "gpio11", "gpio12";
    function = "qup10";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c11_default: qup-i2c11-default-state {
    pins = "gpio94", "gpio95";
    function = "qup11";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi11_default: qup-spi11-default-state {
    pins = "gpio92", "gpio93", "gpio94", "gpio95";
    function = "qup11";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c12_default: qup-i2c12-default-state {
    pins = "gpio83", "gpio84";
    function = "qup12";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi12_default: qup-spi12-default-state {
    pins = "gpio83", "gpio84", "gpio85", "gpio86";
    function = "qup12";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c13_default: qup-i2c13-default-state {
    pins = "gpio43", "gpio44";
    function = "qup13";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi13_default: qup-spi13-default-state {
    pins = "gpio43", "gpio44", "gpio45", "gpio46";
    function = "qup13";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c14_default: qup-i2c14-default-state {
    pins = "gpio47", "gpio48";
    function = "qup14";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi14_default: qup-spi14-default-state {
    pins = "gpio47", "gpio48", "gpio49", "gpio50";
    function = "qup14";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c15_default: qup-i2c15-default-state {
    pins = "gpio27", "gpio28";
    function = "qup15";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi15_default: qup-spi15-default-state {
    pins = "gpio27", "gpio28", "gpio29", "gpio30";
    function = "qup15";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c16_default: qup-i2c16-default-state {
    pins = "gpio86", "gpio85";
    function = "qup16";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi16_default: qup-spi16-default-state {
    pins = "gpio83", "gpio84", "gpio85", "gpio86";
    function = "qup16";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c17_default: qup-i2c17-default-state {
    pins = "gpio55", "gpio56";
    function = "qup17";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi17_default: qup-spi17-default-state {
    pins = "gpio55", "gpio56", "gpio57", "gpio58";
    function = "qup17";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c18_default: qup-i2c18-default-state {
    pins = "gpio23", "gpio24";
    function = "qup18";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi18_default: qup-spi18-default-state {
    pins = "gpio23", "gpio24", "gpio25", "gpio26";
    function = "qup18";
    drive-strength = <6>;
    bias-disable;
   };

   qup_i2c19_default: qup-i2c19-default-state {
    pins = "gpio57", "gpio58";
    function = "qup19";
    drive-strength = <2>;
    bias-disable;
   };

   qup_spi19_default: qup-spi19-default-state {
    pins = "gpio55", "gpio56", "gpio57", "gpio58";
    function = "qup19";
    drive-strength = <6>;
    bias-disable;
   };

   pcie0_default_state: pcie0-default-state {
    perst-pins {
     pins = "gpio35";
     function = "gpio";
     drive-strength = <2>;
     bias-pull-down;
    };

    clkreq-pins {
     pins = "gpio36";
     function = "pci_e0";
     drive-strength = <2>;
     bias-pull-up;
    };

    wake-pins {
     pins = "gpio37";
     function = "gpio";
     drive-strength = <2>;
     bias-pull-up;
    };
   };

   pcie1_default_state: pcie1-default-state {
    perst-pins {
     pins = "gpio102";
     function = "gpio";
     drive-strength = <2>;
     bias-pull-down;
    };

    clkreq-pins {
     pins = "gpio103";
     function = "pci_e1";
     drive-strength = <2>;
     bias-pull-up;
    };

    wake-pins {
     pins = "gpio104";
     function = "gpio";
     drive-strength = <2>;
     bias-pull-up;
    };
   };
  };

  remoteproc_mpss: remoteproc@4080000 {
   compatible = "qcom,sm8150-mpss-pas";
   reg = <0x0 0x04080000 0x0 0x4040>;

   interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
           <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
           <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
           <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
           <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
           <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
   interrupt-names = "wdog", "fatal", "ready", "handover",
       "stop-ack", "shutdown-ack";

   clocks = <&rpmhcc RPMH_CXO_CLK>;
   clock-names = "xo";

   power-domains = <&rpmhpd SM8150_CX>,
     <&rpmhpd SM8150_MSS>;
   power-domain-names = "cx", "mss";

   memory-region = <&mpss_mem>;

   qcom,qmp = <&aoss_qmp>;

   qcom,smem-states = <&modem_smp2p_out 0>;
   qcom,smem-state-names = "stop";

   status = "disabled";

   glink-edge {
    interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
    label = "modem";
    qcom,remote-pid = <1>;
    mboxes = <&apss_shared 12>;
   };
  };

  stm@6002000 {
   compatible = "arm,coresight-stm", "arm,primecell";
   reg = <0 0x06002000 0 0x1000>,
         <0 0x16280000 0 0x180000>;
   reg-names = "stm-base", "stm-stimulus-base";

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";

   out-ports {
    port {
     stm_out: endpoint {
      remote-endpoint = <&funnel0_in7>;
     };
    };
   };
  };

  funnel@6041000 {
   compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
   reg = <0 0x06041000 0 0x1000>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";

   out-ports {
    port {
     funnel0_out: endpoint {
      remote-endpoint = <&merge_funnel_in0>;
     };
    };
   };

   in-ports {
    #address-cells = <1>;
    #size-cells = <0>;

    port@7 {
     reg = <7>;
     funnel0_in7: endpoint {
      remote-endpoint = <&stm_out>;
     };
    };
   };
  };

  funnel@6042000 {
   compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
   reg = <0 0x06042000 0 0x1000>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";

   out-ports {
    port {
     funnel1_out: endpoint {
      remote-endpoint = <&merge_funnel_in1>;
     };
    };
   };

   in-ports {
    #address-cells = <1>;
    #size-cells = <0>;

    port@4 {
     reg = <4>;
     funnel1_in4: endpoint {
      remote-endpoint = <&swao_replicator_out>;
     };
    };
   };
  };

  funnel@6043000 {
   compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
   reg = <0 0x06043000 0 0x1000>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";

   out-ports {
    port {
     funnel2_out: endpoint {
      remote-endpoint = <&merge_funnel_in2>;
     };
    };
   };

   in-ports {
    #address-cells = <1>;
    #size-cells = <0>;

    port@2 {
     reg = <2>;
     funnel2_in2: endpoint {
      remote-endpoint = <&apss_merge_funnel_out>;
     };
    };
   };
  };

  funnel@6045000 {
   compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
   reg = <0 0x06045000 0 0x1000>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";

   out-ports {
    port {
     merge_funnel_out: endpoint {
      remote-endpoint = <&etf_in>;
     };
    };
   };

   in-ports {
    #address-cells = <1>;
    #size-cells = <0>;

    port@0 {
     reg = <0>;
     merge_funnel_in0: endpoint {
      remote-endpoint = <&funnel0_out>;
     };
    };

    port@1 {
     reg = <1>;
     merge_funnel_in1: endpoint {
      remote-endpoint = <&funnel1_out>;
     };
    };

    port@2 {
     reg = <2>;
     merge_funnel_in2: endpoint {
      remote-endpoint = <&funnel2_out>;
     };
    };
   };
  };

  replicator@6046000 {
   compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
   reg = <0 0x06046000 0 0x1000>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";

   out-ports {
    #address-cells = <1>;
    #size-cells = <0>;

    port@0 {
     reg = <0>;
     replicator_out0: endpoint {
      remote-endpoint = <&etr_in>;
     };
    };

    port@1 {
     reg = <1>;
     replicator_out1: endpoint {
      remote-endpoint = <&replicator1_in>;
     };
    };
   };

   in-ports {
    port {
     replicator_in0: endpoint {
      remote-endpoint = <&etf_out>;
     };
    };
   };
  };

  etf@6047000 {
   compatible = "arm,coresight-tmc", "arm,primecell";
   reg = <0 0x06047000 0 0x1000>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";

   out-ports {
    port {
     etf_out: endpoint {
      remote-endpoint = <&replicator_in0>;
     };
    };
   };

   in-ports {
    port {
     etf_in: endpoint {
      remote-endpoint = <&merge_funnel_out>;
     };
    };
   };
  };

  etr@6048000 {
   compatible = "arm,coresight-tmc", "arm,primecell";
   reg = <0 0x06048000 0 0x1000>;
   iommus = <&apps_smmu 0x05e0 0x0>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";
   arm,scatter-gather;

   in-ports {
    port {
     etr_in: endpoint {
      remote-endpoint = <&replicator_out0>;
     };
    };
   };
  };

  replicator@604a000 {
   compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
   reg = <0 0x0604a000 0 0x1000>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";

   out-ports {
    #address-cells = <1>;
    #size-cells = <0>;

    port@1 {
     reg = <1>;
     replicator1_out: endpoint {
      remote-endpoint = <&swao_funnel_in>;
     };
    };
   };

   in-ports {

    port {
     replicator1_in: endpoint {
      remote-endpoint = <&replicator_out1>;
     };
    };
   };
  };

  funnel@6b08000 {
   compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
   reg = <0 0x06b08000 0 0x1000>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";

   out-ports {
    port {
     swao_funnel_out: endpoint {
      remote-endpoint = <&swao_etf_in>;
     };
    };
   };

   in-ports {
    #address-cells = <1>;
    #size-cells = <0>;

    port@6 {
     reg = <6>;
     swao_funnel_in: endpoint {
      remote-endpoint = <&replicator1_out>;
     };
    };
   };
  };

  etf@6b09000 {
   compatible = "arm,coresight-tmc", "arm,primecell";
   reg = <0 0x06b09000 0 0x1000>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";

   out-ports {
    port {
     swao_etf_out: endpoint {
      remote-endpoint = <&swao_replicator_in>;
     };
    };
   };

   in-ports {
    port {
     swao_etf_in: endpoint {
      remote-endpoint = <&swao_funnel_out>;
     };
    };
   };
  };

  replicator@6b0a000 {
   compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
   reg = <0 0x06b0a000 0 0x1000>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";
   qcom,replicator-loses-context;

   out-ports {
    port {
     swao_replicator_out: endpoint {
      remote-endpoint = <&funnel1_in4>;
     };
    };
   };

   in-ports {
    port {
     swao_replicator_in: endpoint {
      remote-endpoint = <&swao_etf_out>;
     };
    };
   };
  };

  etm@7040000 {
   compatible = "arm,coresight-etm4x", "arm,primecell";
   reg = <0 0x07040000 0 0x1000>;

   cpu = <&cpu0>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";
   arm,coresight-loses-context-with-cpu;
   qcom,skip-power-up;

   out-ports {
    port {
     etm0_out: endpoint {
      remote-endpoint = <&apss_funnel_in0>;
     };
    };
   };
  };

  etm@7140000 {
   compatible = "arm,coresight-etm4x", "arm,primecell";
   reg = <0 0x07140000 0 0x1000>;

   cpu = <&cpu1>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";
   arm,coresight-loses-context-with-cpu;
   qcom,skip-power-up;

   out-ports {
    port {
     etm1_out: endpoint {
      remote-endpoint = <&apss_funnel_in1>;
     };
    };
   };
  };

  etm@7240000 {
   compatible = "arm,coresight-etm4x", "arm,primecell";
   reg = <0 0x07240000 0 0x1000>;

   cpu = <&cpu2>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";
   arm,coresight-loses-context-with-cpu;
   qcom,skip-power-up;

   out-ports {
    port {
     etm2_out: endpoint {
      remote-endpoint = <&apss_funnel_in2>;
     };
    };
   };
  };

  etm@7340000 {
   compatible = "arm,coresight-etm4x", "arm,primecell";
   reg = <0 0x07340000 0 0x1000>;

   cpu = <&cpu3>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";
   arm,coresight-loses-context-with-cpu;
   qcom,skip-power-up;

   out-ports {
    port {
     etm3_out: endpoint {
      remote-endpoint = <&apss_funnel_in3>;
     };
    };
   };
  };

  etm@7440000 {
   compatible = "arm,coresight-etm4x", "arm,primecell";
   reg = <0 0x07440000 0 0x1000>;

   cpu = <&cpu4>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";
   arm,coresight-loses-context-with-cpu;
   qcom,skip-power-up;

   out-ports {
    port {
     etm4_out: endpoint {
      remote-endpoint = <&apss_funnel_in4>;
     };
    };
   };
  };

  etm@7540000 {
   compatible = "arm,coresight-etm4x", "arm,primecell";
   reg = <0 0x07540000 0 0x1000>;

   cpu = <&cpu5>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";
   arm,coresight-loses-context-with-cpu;
   qcom,skip-power-up;

   out-ports {
    port {
     etm5_out: endpoint {
      remote-endpoint = <&apss_funnel_in5>;
     };
    };
   };
  };

  etm@7640000 {
   compatible = "arm,coresight-etm4x", "arm,primecell";
   reg = <0 0x07640000 0 0x1000>;

   cpu = <&cpu6>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";
   arm,coresight-loses-context-with-cpu;
   qcom,skip-power-up;

   out-ports {
    port {
     etm6_out: endpoint {
      remote-endpoint = <&apss_funnel_in6>;
     };
    };
   };
  };

  etm@7740000 {
   compatible = "arm,coresight-etm4x", "arm,primecell";
   reg = <0 0x07740000 0 0x1000>;

   cpu = <&cpu7>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";
   arm,coresight-loses-context-with-cpu;
   qcom,skip-power-up;

   out-ports {
    port {
     etm7_out: endpoint {
      remote-endpoint = <&apss_funnel_in7>;
     };
    };
   };
  };

  funnel@7800000 { /* APSS Funnel */
   compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
   reg = <0 0x07800000 0 0x1000>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";

   out-ports {
    port {
     apss_funnel_out: endpoint {
      remote-endpoint = <&apss_merge_funnel_in>;
     };
    };
   };

   in-ports {
    #address-cells = <1>;
    #size-cells = <0>;

    port@0 {
     reg = <0>;
     apss_funnel_in0: endpoint {
      remote-endpoint = <&etm0_out>;
     };
    };

    port@1 {
     reg = <1>;
     apss_funnel_in1: endpoint {
      remote-endpoint = <&etm1_out>;
     };
    };

    port@2 {
     reg = <2>;
     apss_funnel_in2: endpoint {
      remote-endpoint = <&etm2_out>;
     };
    };

    port@3 {
     reg = <3>;
     apss_funnel_in3: endpoint {
      remote-endpoint = <&etm3_out>;
     };
    };

    port@4 {
     reg = <4>;
     apss_funnel_in4: endpoint {
      remote-endpoint = <&etm4_out>;
     };
    };

    port@5 {
     reg = <5>;
     apss_funnel_in5: endpoint {
      remote-endpoint = <&etm5_out>;
     };
    };

    port@6 {
     reg = <6>;
     apss_funnel_in6: endpoint {
      remote-endpoint = <&etm6_out>;
     };
    };

    port@7 {
     reg = <7>;
     apss_funnel_in7: endpoint {
      remote-endpoint = <&etm7_out>;
     };
    };
   };
  };

  funnel@7810000 {
   compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
   reg = <0 0x07810000 0 0x1000>;

   clocks = <&aoss_qmp>;
   clock-names = "apb_pclk";

   out-ports {
    port {
     apss_merge_funnel_out: endpoint {
      remote-endpoint = <&funnel2_in2>;
     };
    };
   };

   in-ports {
    port {
     apss_merge_funnel_in: endpoint {
      remote-endpoint = <&apss_funnel_out>;
     };
    };
   };
  };

  remoteproc_cdsp: remoteproc@8300000 {
   compatible = "qcom,sm8150-cdsp-pas";
   reg = <0x0 0x08300000 0x0 0x4040>;

   interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
           <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
           <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
           <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
           <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
   interrupt-names = "wdog", "fatal", "ready",
       "handover", "stop-ack";

   clocks = <&rpmhcc RPMH_CXO_CLK>;
   clock-names = "xo";

   power-domains = <&rpmhpd SM8150_CX>;

   memory-region = <&cdsp_mem>;

   qcom,qmp = <&aoss_qmp>;

   qcom,smem-states = <&cdsp_smp2p_out 0>;
   qcom,smem-state-names = "stop";

   status = "disabled";

   glink-edge {
    interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
    label = "cdsp";
    qcom,remote-pid = <5>;
    mboxes = <&apss_shared 4>;

    fastrpc {
     compatible = "qcom,fastrpc";
     qcom,glink-channels = "fastrpcglink-apps-dsp";
     label = "cdsp";
     qcom,non-secure-domain;
     #address-cells = <1>;
     #size-cells = <0>;

     compute-cb@1 {
      compatible = "qcom,fastrpc-compute-cb";
      reg = <1>;
      iommus = <&apps_smmu 0x1001 0x0460>;
     };

     compute-cb@2 {
      compatible = "qcom,fastrpc-compute-cb";
      reg = <2>;
      iommus = <&apps_smmu 0x1002 0x0460>;
     };

     compute-cb@3 {
      compatible = "qcom,fastrpc-compute-cb";
      reg = <3>;
      iommus = <&apps_smmu 0x1003 0x0460>;
     };

     compute-cb@4 {
      compatible = "qcom,fastrpc-compute-cb";
      reg = <4>;
      iommus = <&apps_smmu 0x1004 0x0460>;
     };

     compute-cb@5 {
      compatible = "qcom,fastrpc-compute-cb";
      reg = <5>;
      iommus = <&apps_smmu 0x1005 0x0460>;
     };

     compute-cb@6 {
      compatible = "qcom,fastrpc-compute-cb";
      reg = <6>;
      iommus = <&apps_smmu 0x1006 0x0460>;
     };

     compute-cb@7 {
      compatible = "qcom,fastrpc-compute-cb";
      reg = <7>;
      iommus = <&apps_smmu 0x1007 0x0460>;
     };

     compute-cb@8 {
      compatible = "qcom,fastrpc-compute-cb";
      reg = <8>;
      iommus = <&apps_smmu 0x1008 0x0460>;
     };

     /* note: secure cb9 in downstream */
    };
   };
  };

  usb_1_hsphy: phy@88e2000 {
   compatible = "qcom,sm8150-usb-hs-phy",
         "qcom,usb-snps-hs-7nm-phy";
   reg = <0 0x088e2000 0 0x400>;
   status = "disabled";
   #phy-cells = <0>;

   clocks = <&rpmhcc RPMH_CXO_CLK>;
   clock-names = "ref";

   resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
  };

  usb_2_hsphy: phy@88e3000 {
   compatible = "qcom,sm8150-usb-hs-phy",
         "qcom,usb-snps-hs-7nm-phy";
   reg = <0 0x088e3000 0 0x400>;
   status = "disabled";
   #phy-cells = <0>;

   clocks = <&rpmhcc RPMH_CXO_CLK>;
   clock-names = "ref";

   resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
  };

  usb_1_qmpphy: phy@88e8000 {
   compatible = "qcom,sm8150-qmp-usb3-dp-phy";
   reg = <0 0x088e8000 0 0x3000>;

   clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
     <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
     <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
     <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
   clock-names = "aux",
          "ref",
          "com_aux",
          "usb3_pipe";

   resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
     <&gcc GCC_USB3_PHY_PRIM_BCR>;
   reset-names = "phy", "common";

   #clock-cells = <1>;
   #phy-cells = <1>;

   status = "disabled";

   ports {
    #address-cells = <1>;
    #size-cells = <0>;

    port@0 {
     reg = <0>;

     usb_1_qmpphy_out: endpoint {
     };
    };

    port@1 {
     reg = <1>;

     usb_1_qmpphy_usb_ss_in: endpoint {
      remote-endpoint = <&usb_1_dwc3_ss>;
     };
    };

    port@2 {
     reg = <2>;

     usb_1_qmpphy_dp_in: endpoint {
      remote-endpoint = <&mdss_dp_out>;
     };
    };
   };
  };

  usb_2_qmpphy: phy@88eb000 {
   compatible = "qcom,sm8150-qmp-usb3-uni-phy";
   reg = <0 0x088eb000 0 0x1000>;

   clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
     <&gcc GCC_USB3_SEC_CLKREF_CLK>,
     <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
     <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
   clock-names = "aux",
          "ref",
          "com_aux",
          "pipe";
   clock-output-names = "usb3_uni_phy_pipe_clk_src";
   #clock-cells = <0>;
   #phy-cells = <0>;

   resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
     <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
   reset-names = "phy",
          "phy_phy";

   status = "disabled";
  };

  sdhc_2: mmc@8804000 {
   compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5";
   reg = <0 0x08804000 0 0x1000>;

   interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-names = "hc_irq", "pwr_irq";

   clocks = <&gcc GCC_SDCC2_AHB_CLK>,
     <&gcc GCC_SDCC2_APPS_CLK>,
     <&rpmhcc RPMH_CXO_CLK>;
   clock-names = "iface", "core", "xo";
   iommus = <&apps_smmu 0x6a0 0x0>;
   qcom,dll-config = <0x0007642c>;
   qcom,ddr-config = <0x80040868>;
   power-domains = <&rpmhpd 0>;
   operating-points-v2 = <&sdhc2_opp_table>;

   status = "disabled";

   sdhc2_opp_table: opp-table {
    compatible = "operating-points-v2";

    opp-19200000 {
     opp-hz = /bits/ 64 <19200000>;
     required-opps = <&rpmhpd_opp_min_svs>;
    };

    opp-50000000 {
     opp-hz = /bits/ 64 <50000000>;
     required-opps = <&rpmhpd_opp_low_svs>;
    };

    opp-100000000 {
     opp-hz = /bits/ 64 <100000000>;
     required-opps = <&rpmhpd_opp_svs>;
    };

    opp-202000000 {
     opp-hz = /bits/ 64 <202000000>;
     required-opps = <&rpmhpd_opp_svs_l1>;
    };
   };
  };

  dc_noc: interconnect@9160000 {
   compatible = "qcom,sm8150-dc-noc";
   reg = <0 0x09160000 0 0x3200>;
   #interconnect-cells = <2>;
   qcom,bcm-voters = <&apps_bcm_voter>;
  };

  gem_noc: interconnect@9680000 {
   compatible = "qcom,sm8150-gem-noc";
   reg = <0 0x09680000 0 0x3e200>;
   #interconnect-cells = <2>;
   qcom,bcm-voters = <&apps_bcm_voter>;
  };

  usb_1: usb@a6f8800 {
   compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
   reg = <0 0x0a6f8800 0 0x400>;
   status = "disabled";
   #address-cells = <2>;
   #size-cells = <2>;
   ranges;
   dma-ranges;

   clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
     <&gcc GCC_USB30_PRIM_MASTER_CLK>,
     <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
     <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
     <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
     <&gcc GCC_USB3_SEC_CLKREF_CLK>;
   clock-names = "cfg_noc",
          "core",
          "iface",
          "sleep",
          "mock_utmi",
          "xo";

   assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
       <&gcc GCC_USB30_PRIM_MASTER_CLK>;
   assigned-clock-rates = <19200000>, <200000000>;

   interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
           <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
           <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
           <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
           <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-names = "pwr_event",
       "hs_phy_irq",
       "dp_hs_phy_irq",
       "dm_hs_phy_irq",
       "ss_phy_irq";

   power-domains = <&gcc USB30_PRIM_GDSC>;

   resets = <&gcc GCC_USB30_PRIM_BCR>;

   interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
     <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
   interconnect-names = "usb-ddr", "apps-usb";

   usb_1_dwc3: usb@a600000 {
    compatible = "snps,dwc3";
    reg = <0 0x0a600000 0 0xcd00>;
    interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
    iommus = <&apps_smmu 0x140 0>;
    snps,dis_u2_susphy_quirk;
    snps,dis_u3_susphy_quirk;
    snps,dis_enblslpm_quirk;
    snps,dis-u1-entry-quirk;
    snps,dis-u2-entry-quirk;
    phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
    phy-names = "usb2-phy", "usb3-phy";

    ports {
     #address-cells = <1>;
     #size-cells = <0>;

     port@0 {
      reg = <0>;

      usb_1_dwc3_hs: endpoint {
      };
     };

     port@1 {
      reg = <1>;

      usb_1_dwc3_ss: endpoint {
       remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
      };
     };
    };
   };
  };

  usb_2: usb@a8f8800 {
   compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
   reg = <0 0x0a8f8800 0 0x400>;
   status = "disabled";
   #address-cells = <2>;
   #size-cells = <2>;
   ranges;
   dma-ranges;

   clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
     <&gcc GCC_USB30_SEC_MASTER_CLK>,
     <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
     <&gcc GCC_USB30_SEC_SLEEP_CLK>,
     <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
     <&gcc GCC_USB3_SEC_CLKREF_CLK>;
   clock-names = "cfg_noc",
          "core",
          "iface",
          "sleep",
          "mock_utmi",
          "xo";

   assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
       <&gcc GCC_USB30_SEC_MASTER_CLK>;
   assigned-clock-rates = <19200000>, <200000000>;

   interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
           <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
           <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
           <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
           <&pdc 7 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-names = "pwr_event",
       "hs_phy_irq",
       "dp_hs_phy_irq",
       "dm_hs_phy_irq",
       "ss_phy_irq";

   power-domains = <&gcc USB30_SEC_GDSC>;

   resets = <&gcc GCC_USB30_SEC_BCR>;

   interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
     <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
   interconnect-names = "usb-ddr", "apps-usb";

   usb_2_dwc3: usb@a800000 {
    compatible = "snps,dwc3";
    reg = <0 0x0a800000 0 0xcd00>;
    interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
    iommus = <&apps_smmu 0x160 0>;
    snps,dis_u2_susphy_quirk;
    snps,dis_u3_susphy_quirk;
    snps,dis_enblslpm_quirk;
    snps,dis-u1-entry-quirk;
    snps,dis-u2-entry-quirk;
    phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
    phy-names = "usb2-phy", "usb3-phy";
   };
  };

  videocc: clock-controller@ab00000 {
   compatible = "qcom,sm8150-videocc";
   reg = <0 0x0ab00000 0 0x10000>;
   clocks = <&gcc GCC_VIDEO_AHB_CLK>,
     <&rpmhcc RPMH_CXO_CLK>;
   clock-names = "iface", "bi_tcxo";
   power-domains = <&rpmhpd SM8150_MMCX>;
   required-opps = <&rpmhpd_opp_low_svs>;
   #clock-cells = <1>;
   #reset-cells = <1>;
   #power-domain-cells = <1>;
  };

  camnoc_virt: interconnect@ac00000 {
   compatible = "qcom,sm8150-camnoc-virt";
   reg = <0 0x0ac00000 0 0x1000>;
   #interconnect-cells = <2>;
   qcom,bcm-voters = <&apps_bcm_voter>;
  };

  camcc: clock-controller@ad00000 {
   compatible = "qcom,sm8150-camcc";
   reg = <0 0x0ad00000 0 0x10000>;
   clocks = <&rpmhcc RPMH_CXO_CLK>,
     <&gcc GCC_CAMERA_AHB_CLK>;
   power-domains = <&rpmhpd SM8150_MMCX>;
   required-opps = <&rpmhpd_opp_low_svs>;
   #clock-cells = <1>;
   #reset-cells = <1>;
   #power-domain-cells = <1>;
  };

  mdss: display-subsystem@ae00000 {
   compatible = "qcom,sm8150-mdss";
   reg = <0 0x0ae00000 0 0x1000>;
   reg-names = "mdss";

   interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>,
     <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>;
   interconnect-names = "mdp0-mem", "mdp1-mem";

   power-domains = <&dispcc MDSS_GDSC>;

   clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
     <&gcc GCC_DISP_HF_AXI_CLK>,
     <&gcc GCC_DISP_SF_AXI_CLK>,
     <&dispcc DISP_CC_MDSS_MDP_CLK>;
   clock-names = "iface", "bus", "nrt_bus", "core";

   interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-controller;
   #interrupt-cells = <1>;

   iommus = <&apps_smmu 0x800 0x420>;

   status = "disabled";

   #address-cells = <2>;
   #size-cells = <2>;
   ranges;

   mdss_mdp: display-controller@ae01000 {
    compatible = "qcom,sm8150-dpu";
    reg = <0 0x0ae01000 0 0x8f000>,
          <0 0x0aeb0000 0 0x3000>;
    reg-names = "mdp", "vbif";

    clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
      <&gcc GCC_DISP_HF_AXI_CLK>,
      <&dispcc DISP_CC_MDSS_MDP_CLK>,
      <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
    clock-names = "iface", "bus", "core", "vsync";

    assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
    assigned-clock-rates = <19200000>;

    operating-points-v2 = <&mdp_opp_table>;
    power-domains = <&rpmhpd SM8150_MMCX>;

    interrupt-parent = <&mdss>;
    interrupts = <0>;

    ports {
     #address-cells = <1>;
     #size-cells = <0>;

     port@0 {
      reg = <0>;
      dpu_intf1_out: endpoint {
       remote-endpoint = <&mdss_dsi0_in>;
      };
     };

     port@1 {
      reg = <1>;
      dpu_intf2_out: endpoint {
       remote-endpoint = <&mdss_dsi1_in>;
      };
     };

     port@2 {
      reg = <2>;
      dpu_intf0_out: endpoint {
       remote-endpoint = <&mdss_dp_in>;
      };
     };
    };

    mdp_opp_table: opp-table {
     compatible = "operating-points-v2";

     opp-171428571 {
      opp-hz = /bits/ 64 <171428571>;
      required-opps = <&rpmhpd_opp_low_svs>;
     };

     opp-300000000 {
      opp-hz = /bits/ 64 <300000000>;
      required-opps = <&rpmhpd_opp_svs>;
     };

     opp-345000000 {
      opp-hz = /bits/ 64 <345000000>;
      required-opps = <&rpmhpd_opp_svs_l1>;
     };

     opp-460000000 {
      opp-hz = /bits/ 64 <460000000>;
      required-opps = <&rpmhpd_opp_nom>;
     };
    };
   };

   mdss_dp: displayport-controller@ae90000 {
    compatible = "qcom,sm8150-dp", "qcom,sm8350-dp";
    reg = <0 0xae90000 0 0x200>,
          <0 0xae90200 0 0x200>,
          <0 0xae90400 0 0x600>,
          <0 0x0ae90a00 0 0x600>,
          <0 0x0ae91000 0 0x600>;

    interrupt-parent = <&mdss>;
    interrupts = <12>;
    clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
      <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
      <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
      <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
      <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
    clock-names = "core_iface",
           "core_aux",
           "ctrl_link",
           "ctrl_link_iface",
           "stream_pixel";

    assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
        <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
    assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
        <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;

    phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
    phy-names = "dp";

    #sound-dai-cells = <0>;

    operating-points-v2 = <&dp_opp_table>;
    power-domains = <&rpmhpd SM8250_MMCX>;

    status = "disabled";

    ports {
     #address-cells = <1>;
     #size-cells = <0>;

     port@0 {
      reg = <0>;
      mdss_dp_in: endpoint {
       remote-endpoint = <&dpu_intf0_out>;
      };
     };

     port@1 {
      reg = <1>;

      mdss_dp_out: endpoint {
       remote-endpoint = <&usb_1_qmpphy_dp_in>;
      };
     };
    };

    dp_opp_table: opp-table {
     compatible = "operating-points-v2";

     opp-160000000 {
      opp-hz = /bits/ 64 <160000000>;
      required-opps = <&rpmhpd_opp_low_svs>;
     };

     opp-270000000 {
      opp-hz = /bits/ 64 <270000000>;
      required-opps = <&rpmhpd_opp_svs>;
     };

     opp-540000000 {
      opp-hz = /bits/ 64 <540000000>;
      required-opps = <&rpmhpd_opp_svs_l1>;
     };

     opp-810000000 {
      opp-hz = /bits/ 64 <810000000>;
      required-opps = <&rpmhpd_opp_nom>;
     };
    };
   };

   mdss_dsi0: dsi@ae94000 {
    compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
    reg = <0 0x0ae94000 0 0x400>;
    reg-names = "dsi_ctrl";

    interrupt-parent = <&mdss>;
    interrupts = <4>;

    clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
      <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
      <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
      <&dispcc DISP_CC_MDSS_ESC0_CLK>,
      <&dispcc DISP_CC_MDSS_AHB_CLK>,
      <&gcc GCC_DISP_HF_AXI_CLK>;
    clock-names = "byte",
           "byte_intf",
           "pixel",
           "core",
           "iface",
           "bus";

    assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
        <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
    assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
        <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;

    operating-points-v2 = <&dsi_opp_table>;
    power-domains = <&rpmhpd SM8150_MMCX>;

    phys = <&mdss_dsi0_phy>;

    status = "disabled";

    #address-cells = <1>;
    #size-cells = <0>;

    ports {
     #address-cells = <1>;
     #size-cells = <0>;

     port@0 {
      reg = <0>;
      mdss_dsi0_in: endpoint {
       remote-endpoint = <&dpu_intf1_out>;
      };
     };

     port@1 {
      reg = <1>;
      mdss_dsi0_out: endpoint {
      };
     };
    };

    dsi_opp_table: opp-table {
     compatible = "operating-points-v2";

     opp-187500000 {
      opp-hz = /bits/ 64 <187500000>;
      required-opps = <&rpmhpd_opp_low_svs>;
     };

     opp-300000000 {
      opp-hz = /bits/ 64 <300000000>;
      required-opps = <&rpmhpd_opp_svs>;
     };

     opp-358000000 {
      opp-hz = /bits/ 64 <358000000>;
      required-opps = <&rpmhpd_opp_svs_l1>;
     };
    };
   };

   mdss_dsi0_phy: phy@ae94400 {
    compatible = "qcom,dsi-phy-7nm-8150";
    reg = <0 0x0ae94400 0 0x200>,
          <0 0x0ae94600 0 0x280>,
          <0 0x0ae94900 0 0x260>;
    reg-names = "dsi_phy",
         "dsi_phy_lane",
         "dsi_pll";

    #clock-cells = <1>;
    #phy-cells = <0>;

    clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
      <&rpmhcc RPMH_CXO_CLK>;
    clock-names = "iface", "ref";

    status = "disabled";
   };

   mdss_dsi1: dsi@ae96000 {
    compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
    reg = <0 0x0ae96000 0 0x400>;
    reg-names = "dsi_ctrl";

    interrupt-parent = <&mdss>;
    interrupts = <5>;

    clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
      <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
      <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
      <&dispcc DISP_CC_MDSS_ESC1_CLK>,
      <&dispcc DISP_CC_MDSS_AHB_CLK>,
      <&gcc GCC_DISP_HF_AXI_CLK>;
    clock-names = "byte",
           "byte_intf",
           "pixel",
           "core",
           "iface",
           "bus";

    assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
        <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
    assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
        <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;

    operating-points-v2 = <&dsi_opp_table>;
    power-domains = <&rpmhpd SM8150_MMCX>;

    phys = <&mdss_dsi1_phy>;

    status = "disabled";

    #address-cells = <1>;
    #size-cells = <0>;

    ports {
     #address-cells = <1>;
     #size-cells = <0>;

     port@0 {
      reg = <0>;
      mdss_dsi1_in: endpoint {
       remote-endpoint = <&dpu_intf2_out>;
      };
     };

     port@1 {
      reg = <1>;
      mdss_dsi1_out: endpoint {
      };
     };
    };
   };

   mdss_dsi1_phy: phy@ae96400 {
    compatible = "qcom,dsi-phy-7nm-8150";
    reg = <0 0x0ae96400 0 0x200>,
          <0 0x0ae96600 0 0x280>,
          <0 0x0ae96900 0 0x260>;
    reg-names = "dsi_phy",
         "dsi_phy_lane",
         "dsi_pll";

    #clock-cells = <1>;
    #phy-cells = <0>;

    clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
      <&rpmhcc RPMH_CXO_CLK>;
    clock-names = "iface", "ref";

    status = "disabled";
   };
  };

  dispcc: clock-controller@af00000 {
   compatible = "qcom,sm8150-dispcc";
   reg = <0 0x0af00000 0 0x10000>;
   clocks = <&rpmhcc RPMH_CXO_CLK>,
     <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
     <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
     <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
     <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
     <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
     <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
   clock-names = "bi_tcxo",
          "dsi0_phy_pll_out_byteclk",
          "dsi0_phy_pll_out_dsiclk",
          "dsi1_phy_pll_out_byteclk",
          "dsi1_phy_pll_out_dsiclk",
          "dp_phy_pll_link_clk",
          "dp_phy_pll_vco_div_clk";
   power-domains = <&rpmhpd SM8150_MMCX>;
   required-opps = <&rpmhpd_opp_low_svs>;
   #clock-cells = <1>;
   #reset-cells = <1>;
   #power-domain-cells = <1>;
  };

  pdc: interrupt-controller@b220000 {
   compatible = "qcom,sm8150-pdc", "qcom,pdc";
   reg = <0 0x0b220000 0 0x30000>;
   qcom,pdc-ranges = <0 480 94>, <94 609 31>,
       <125 63 1>;
   #interrupt-cells = <2>;
   interrupt-parent = <&intc>;
   interrupt-controller;
  };

  aoss_qmp: power-management@c300000 {
   compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp";
   reg = <0x0 0x0c300000 0x0 0x400>;
   interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
   mboxes = <&apss_shared 0>;

   #clock-cells = <0>;
  };

  sram@c3f0000 {
   compatible = "qcom,rpmh-stats";
   reg = <0 0x0c3f0000 0 0x400>;
  };

  tsens0: thermal-sensor@c263000 {
   compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
   reg = <0 0x0c263000 0 0x1ff>, /* TM */
         <0 0x0c222000 0 0x1ff>; /* SROT */
   #qcom,sensors = <16>;
   interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-names = "uplow", "critical";
   #thermal-sensor-cells = <1>;
  };

  tsens1: thermal-sensor@c265000 {
   compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
   reg = <0 0x0c265000 0 0x1ff>, /* TM */
         <0 0x0c223000 0 0x1ff>; /* SROT */
   #qcom,sensors = <8>;
   interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
   interrupt-names = "uplow", "critical";
   #thermal-sensor-cells = <1>;
  };

  spmi_bus: spmi@c440000 {
   compatible = "qcom,spmi-pmic-arb";
   reg = <0x0 0x0c440000 0x0 0x0001100>,
         <0x0 0x0c600000 0x0 0x2000000>,
         <0x0 0x0e600000 0x0 0x0100000>,
         <0x0 0x0e700000 0x0 0x00a0000>,
         <0x0 0x0c40a000 0x0 0x0026000>;
   reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
   interrupt-names = "periph_irq";
   interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
   qcom,ee = <0>;
   qcom,channel = <0>;
   #address-cells = <2>;
   #size-cells = <0>;
   interrupt-controller;
   #interrupt-cells = <4>;
  };

  apps_smmu: iommu@15000000 {
   compatible = "qcom,sm8150-smmu-500", "qcom,smmu-500", "arm,mmu-500";
   reg = <0 0x15000000 0 0x100000>;
   #iommu-cells = <2>;
   #global-interrupts = <1>;
   interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
   dma-coherent;
  };

  remoteproc_adsp: remoteproc@17300000 {
   compatible = "qcom,sm8150-adsp-pas";
   reg = <0x0 0x17300000 0x0 0x4040>;

   interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
           <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
           <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
           <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
           <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
   interrupt-names = "wdog", "fatal", "ready",
       "handover", "stop-ack";

   clocks = <&rpmhcc RPMH_CXO_CLK>;
   clock-names = "xo";

   power-domains = <&rpmhpd SM8150_CX>;

   memory-region = <&adsp_mem>;

   qcom,qmp = <&aoss_qmp>;

   qcom,smem-states = <&adsp_smp2p_out 0>;
   qcom,smem-state-names = "stop";

   status = "disabled";

   glink-edge {
    interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
    label = "lpass";
    qcom,remote-pid = <2>;
    mboxes = <&apss_shared 8>;

    fastrpc {
     compatible = "qcom,fastrpc";
     qcom,glink-channels = "fastrpcglink-apps-dsp";
     label = "adsp";
     qcom,non-secure-domain;
     #address-cells = <1>;
     #size-cells = <0>;

     compute-cb@3 {
      compatible = "qcom,fastrpc-compute-cb";
      reg = <3>;
      iommus = <&apps_smmu 0x1b23 0x0>;
     };

     compute-cb@4 {
      compatible = "qcom,fastrpc-compute-cb";
      reg = <4>;
      iommus = <&apps_smmu 0x1b24 0x0>;
     };

     compute-cb@5 {
      compatible = "qcom,fastrpc-compute-cb";
      reg = <5>;
      iommus = <&apps_smmu 0x1b25 0x0>;
     };
    };
   };
  };

  intc: interrupt-controller@17a00000 {
   compatible = "arm,gic-v3";
   interrupt-controller;
   #interrupt-cells = <3>;
   reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
         <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
   interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
  };

  apss_shared: mailbox@17c00000 {
   compatible = "qcom,sm8150-apss-shared",
         "qcom,sdm845-apss-shared";
   reg = <0x0 0x17c00000 0x0 0x1000>;
   #mbox-cells = <1>;
  };

  watchdog@17c10000 {
   compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
   reg = <0 0x17c10000 0 0x1000>;
   clocks = <&sleep_clk>;
   interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
  };

  timer@17c20000 {
   #address-cells = <1>;
   #size-cells = <1>;
   ranges = <0 0 0 0x20000000>;
   compatible = "arm,armv7-timer-mem";
   reg = <0x0 0x17c20000 0x0 0x1000>;
   clock-frequency = <19200000>;

   frame@17c21000 {
    frame-number = <0>;
    interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
          <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17c21000 0x1000>,
          <0x17c22000 0x1000>;
   };

   frame@17c23000 {
    frame-number = <1>;
    interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17c23000 0x1000>;
    status = "disabled";
   };

   frame@17c25000 {
    frame-number = <2>;
    interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17c25000 0x1000>;
    status = "disabled";
   };

   frame@17c27000 {
    frame-number = <3>;
    interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17c26000 0x1000>;
    status = "disabled";
   };

   frame@17c29000 {
    frame-number = <4>;
    interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17c29000 0x1000>;
    status = "disabled";
   };

   frame@17c2b000 {
    frame-number = <5>;
    interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17c2b000 0x1000>;
    status = "disabled";
   };

   frame@17c2d000 {
    frame-number = <6>;
    interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
    reg = <0x17c2d000 0x1000>;
    status = "disabled";
   };
  };

  apps_rsc: rsc@18200000 {
   label = "apps_rsc";
   compatible = "qcom,rpmh-rsc";
   reg = <0x0 0x18200000 0x0 0x10000>,
         <0x0 0x18210000 0x0 0x10000>,
         <0x0 0x18220000 0x0 0x10000>;
   reg-names = "drv-0", "drv-1", "drv-2";
   interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
   qcom,tcs-offset = <0xd00>;
   qcom,drv-id = <2>;
   qcom,tcs-config = <ACTIVE_TCS  2>,
       <SLEEP_TCS   3>,
       <WAKE_TCS    3>,
       <CONTROL_TCS 1>;
   power-domains = <&cluster_pd>;

   rpmhcc: clock-controller {
    compatible = "qcom,sm8150-rpmh-clk";
    #clock-cells = <1>;
    clock-names = "xo";
    clocks = <&xo_board>;
   };

   rpmhpd: power-controller {
    compatible = "qcom,sm8150-rpmhpd";
    #power-domain-cells = <1>;
    operating-points-v2 = <&rpmhpd_opp_table>;

    rpmhpd_opp_table: opp-table {
     compatible = "operating-points-v2";

     rpmhpd_opp_ret: opp1 {
      opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
     };

     rpmhpd_opp_min_svs: opp2 {
      opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
     };

     rpmhpd_opp_low_svs: opp3 {
      opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
     };

     rpmhpd_opp_svs: opp4 {
      opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
     };

     rpmhpd_opp_svs_l1: opp5 {
      opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
     };

     rpmhpd_opp_svs_l2: opp6 {
      opp-level = <224>;
     };

     rpmhpd_opp_nom: opp7 {
      opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
     };

     rpmhpd_opp_nom_l1: opp8 {
      opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
     };

     rpmhpd_opp_nom_l2: opp9 {
      opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
     };

     rpmhpd_opp_turbo: opp10 {
      opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
     };

     rpmhpd_opp_turbo_l1: opp11 {
      opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
     };
    };
   };

   apps_bcm_voter: bcm-voter {
    compatible = "qcom,bcm-voter";
   };
  };

  osm_l3: interconnect@18321000 {
   compatible = "qcom,sm8150-osm-l3", "qcom,osm-l3";
   reg = <0 0x18321000 0 0x1400>;

   clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
   clock-names = "xo", "alternate";

   #interconnect-cells = <1>;
  };

  cpufreq_hw: cpufreq@18323000 {
   compatible = "qcom,sm8150-cpufreq-hw", "qcom,cpufreq-hw";
   reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>,
         <0 0x18327800 0 0x1400>;
   reg-names = "freq-domain0", "freq-domain1",
        "freq-domain2";

   clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
   clock-names = "xo", "alternate";

   #freq-domain-cells = <1>;
   #clock-cells = <1>;
  };

  lmh_cluster1: lmh@18350800 {
   compatible = "qcom,sm8150-lmh";
   reg = <0 0x18350800 0 0x400>;
   interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
   cpus = <&cpu4>;
   qcom,lmh-temp-arm-millicelsius = <60000>;
   qcom,lmh-temp-low-millicelsius = <84500>;
   qcom,lmh-temp-high-millicelsius = <85000>;
   interrupt-controller;
   #interrupt-cells = <1>;
  };

  lmh_cluster0: lmh@18358800 {
   compatible = "qcom,sm8150-lmh";
   reg = <0 0x18358800 0 0x400>;
   interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
   cpus = <&cpu0>;
   qcom,lmh-temp-arm-millicelsius = <60000>;
   qcom,lmh-temp-low-millicelsius = <84500>;
   qcom,lmh-temp-high-millicelsius = <85000>;
   interrupt-controller;
   #interrupt-cells = <1>;
  };

  wifi: wifi@18800000 {
   compatible = "qcom,wcn3990-wifi";
   reg = <0 0x18800000 0 0x800000>;
   reg-names = "membase";
   memory-region = <&wlan_mem>;
   clock-names = "cxo_ref_clk_pin", "qdss";
   clocks = <&rpmhcc RPMH_RF_CLK2>, <&aoss_qmp>;
   interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
         <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
   iommus = <&apps_smmu 0x0640 0x1>;
   status = "disabled";
  };
 };

 timer {
  compatible = "arm,armv8-timer";
  interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
        <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
        <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
        <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
 };

 thermal-zones {
  cpu0-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 1>;

   trips {
    cpu0_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu0_alert1: trip-point1 {
     temperature = <95000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu0_crit: cpu-crit {
     temperature = <110000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };

   cooling-maps {
    map0 {
     trip = <&cpu0_alert0>;
     cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
    map1 {
     trip = <&cpu0_alert1>;
     cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };
  };

  cpu1-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 2>;

   trips {
    cpu1_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu1_alert1: trip-point1 {
     temperature = <95000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu1_crit: cpu-crit {
     temperature = <110000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };

   cooling-maps {
    map0 {
     trip = <&cpu1_alert0>;
     cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
    map1 {
     trip = <&cpu1_alert1>;
     cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };
  };

  cpu2-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 3>;

   trips {
    cpu2_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu2_alert1: trip-point1 {
     temperature = <95000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu2_crit: cpu-crit {
     temperature = <110000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };

   cooling-maps {
    map0 {
     trip = <&cpu2_alert0>;
     cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
    map1 {
     trip = <&cpu2_alert1>;
     cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };
  };

  cpu3-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 4>;

   trips {
    cpu3_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu3_alert1: trip-point1 {
     temperature = <95000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu3_crit: cpu-crit {
     temperature = <110000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };

   cooling-maps {
    map0 {
     trip = <&cpu3_alert0>;
     cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
    map1 {
     trip = <&cpu3_alert1>;
     cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };
  };

  cpu4-top-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 7>;

   trips {
    cpu4_top_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu4_top_alert1: trip-point1 {
     temperature = <95000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu4_top_crit: cpu-crit {
     temperature = <110000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };

   cooling-maps {
    map0 {
     trip = <&cpu4_top_alert0>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
    map1 {
     trip = <&cpu4_top_alert1>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };
  };

  cpu5-top-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 8>;

   trips {
    cpu5_top_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu5_top_alert1: trip-point1 {
     temperature = <95000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu5_top_crit: cpu-crit {
     temperature = <110000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };

   cooling-maps {
    map0 {
     trip = <&cpu5_top_alert0>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
    map1 {
     trip = <&cpu5_top_alert1>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };
  };

  cpu6-top-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 9>;

   trips {
    cpu6_top_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu6_top_alert1: trip-point1 {
     temperature = <95000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu6_top_crit: cpu-crit {
     temperature = <110000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };

   cooling-maps {
    map0 {
     trip = <&cpu6_top_alert0>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
    map1 {
     trip = <&cpu6_top_alert1>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };
  };

  cpu7-top-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 10>;

   trips {
    cpu7_top_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu7_top_alert1: trip-point1 {
     temperature = <95000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu7_top_crit: cpu-crit {
     temperature = <110000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };

   cooling-maps {
    map0 {
     trip = <&cpu7_top_alert0>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
    map1 {
     trip = <&cpu7_top_alert1>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };
  };

  cpu4-bottom-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 11>;

   trips {
    cpu4_bottom_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu4_bottom_alert1: trip-point1 {
     temperature = <95000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu4_bottom_crit: cpu-crit {
     temperature = <110000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };

   cooling-maps {
    map0 {
     trip = <&cpu4_bottom_alert0>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
    map1 {
     trip = <&cpu4_bottom_alert1>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };
  };

  cpu5-bottom-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 12>;

   trips {
    cpu5_bottom_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu5_bottom_alert1: trip-point1 {
     temperature = <95000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu5_bottom_crit: cpu-crit {
     temperature = <110000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };

   cooling-maps {
    map0 {
     trip = <&cpu5_bottom_alert0>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
    map1 {
     trip = <&cpu5_bottom_alert1>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };
  };

  cpu6-bottom-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 13>;

   trips {
    cpu6_bottom_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu6_bottom_alert1: trip-point1 {
     temperature = <95000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu6_bottom_crit: cpu-crit {
     temperature = <110000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };

   cooling-maps {
    map0 {
     trip = <&cpu6_bottom_alert0>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
    map1 {
     trip = <&cpu6_bottom_alert1>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };
  };

  cpu7-bottom-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 14>;

   trips {
    cpu7_bottom_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu7_bottom_alert1: trip-point1 {
     temperature = <95000>;
     hysteresis = <2000>;
     type = "passive";
    };

    cpu7_bottom_crit: cpu-crit {
     temperature = <110000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };

   cooling-maps {
    map0 {
     trip = <&cpu7_bottom_alert0>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
    map1 {
     trip = <&cpu7_bottom_alert1>;
     cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
        <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };
  };

  aoss0-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 0>;

   trips {
    aoss0_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "hot";
    };
   };
  };

  cluster0-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 5>;

   trips {
    cluster0_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "hot";
    };
    cluster0_crit: cluster0-crit {
     temperature = <110000>;
     hysteresis = <2000>;
     type = "critical";
    };
   };
  };

  cluster1-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 6>;

   trips {
    cluster1_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "hot";
    };
    cluster1_crit: cluster1-crit {
     temperature = <110000>;
     hysteresis = <2000>;
     type = "critical";
    };
   };
  };

  gpu-top-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens0 15>;

   cooling-maps {
    map0 {
     trip = <&gpu_top_alert0>;
     cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };

   trips {
    gpu_top_alert0: trip-point0 {
     temperature = <85000>;
     hysteresis = <1000>;
     type = "passive";
    };

    trip-point1 {
     temperature = <90000>;
     hysteresis = <1000>;
     type = "hot";
    };

    trip-point2 {
     temperature = <110000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };
  };

  aoss1-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens1 0>;

   trips {
    aoss1_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "hot";
    };
   };
  };

  wlan-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens1 1>;

   trips {
    wlan_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "hot";
    };
   };
  };

  video-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens1 2>;

   trips {
    video_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "hot";
    };
   };
  };

  mem-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens1 3>;

   trips {
    mem_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "hot";
    };
   };
  };

  q6-hvx-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens1 4>;

   trips {
    q6_hvx_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "hot";
    };
   };
  };

  camera-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens1 5>;

   trips {
    camera_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "hot";
    };
   };
  };

  compute-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens1 6>;

   trips {
    compute_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "hot";
    };
   };
  };

  modem-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens1 7>;

   trips {
    modem_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "hot";
    };
   };
  };

  npu-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens1 8>;

   trips {
    npu_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "hot";
    };
   };
  };

  modem-vec-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens1 9>;

   trips {
    modem_vec_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "hot";
    };
   };
  };

  modem-scl-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens1 10>;

   trips {
    modem_scl_alert0: trip-point0 {
     temperature = <90000>;
     hysteresis = <2000>;
     type = "hot";
    };
   };
  };

  gpu-bottom-thermal {
   polling-delay-passive = <250>;

   thermal-sensors = <&tsens1 11>;

   cooling-maps {
    map0 {
     trip = <&gpu_bottom_alert0>;
     cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
    };
   };

   trips {
    gpu_bottom_alert0: trip-point0 {
     temperature = <85000>;
     hysteresis = <1000>;
     type = "passive";
    };

    trip-point1 {
     temperature = <90000>;
     hysteresis = <1000>;
     type = "hot";
    };

    trip-point2 {
     temperature = <110000>;
     hysteresis = <1000>;
     type = "critical";
    };
   };
  };
 };
};