Quelle  rk3566-bigtreetech-cb2.dtsi   Sprache: unbekannt

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/leds/common.h>
#include "rk3566.dtsi"

/ {
 aliases {
  ethernet0 = &gmac1;
  mmc0 = &sdhci;
  mmc1 = &sdmmc0;
 };

 chosen: chosen {
  stdout-path = "serial2:1500000n8";
 };

 ext_cam_clk: clock-25000000-cam {
  compatible = "fixed-clock";
  clock-frequency = <25000000>;
  clock-output-names = "ext_cam_clk";
  #clock-cells = <0>;
 };

 can_mcp2515_osc: clock-8000000-mcp2515 {
  compatible = "fixed-clock";
  clock-frequency = <8000000>;
  #clock-cells = <0>;
 };

 hdmi-con {
  compatible = "hdmi-connector";
  type = "a";

  port {
   hdmi_con_in: endpoint {
    remote-endpoint = <&hdmi_out_con>;
   };
  };
 };

 leds: leds {
  compatible = "gpio-leds";

  led-0 {
   color = <LED_COLOR_ID_BLUE>;
   function = LED_FUNCTION_POWER;
   gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
   linux,default-trigger = "default-on";
   pinctrl-names = "default";
   pinctrl-0 = <&blue_led>;
  };

  led-1 {
   color = <LED_COLOR_ID_GREEN>;
   function = LED_FUNCTION_HEARTBEAT;
   gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
   linux,default-trigger = "heartbeat";
   pinctrl-names = "default";
   pinctrl-0 = <&heartbeat_led>;
  };
 };

 fan: pwm-fan {
  compatible = "pwm-fan";
  #cooling-cells = <2>;
  cooling-levels = <0 50 100 150 200 255>;
  pwms = <&pwm7 0 50000 0>;
 };

 rk809-sound {
  compatible = "simple-audio-card";
  simple-audio-card,format = "i2s";
  simple-audio-card,name = "Analog RK809";
  simple-audio-card,mclk-fs = <256>;

  simple-audio-card,cpu {
   sound-dai = <&i2s1_8ch>;
  };

  simple-audio-card,codec {
   sound-dai = <&rk809>;
  };
 };

 sdio_pwrseq: sdio-pwrseq {
  compatible = "mmc-pwrseq-simple";
  clocks = <&rk809 1>;
  clock-names = "ext_clock";
  pinctrl-names = "default";
  pinctrl-0 = <&wifi_enable_h>;
  post-power-on-delay-ms = <200>;
  reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
 };

 vbus: regulator-vbus {
  compatible = "regulator-fixed";
  regulator-name = "vbus";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
 };

 vcc12v_dcin: regulator-vcc12v-dcin {
  compatible = "regulator-fixed";
  regulator-name = "vcc12v_dcin";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <12000000>;
  regulator-max-microvolt = <12000000>;
 };

 vcc3v3_pcie: regulator-vcc3v3-pcie {
  compatible = "regulator-fixed";
  regulator-name = "vcc3v3_pcie";
  enable-active-high;
  gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&pcie_drv>;
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  vin-supply = <&vcc12v_dcin>;
 };

 vcc3v3_sys: regulator-vcc3v3-sys {
  compatible = "regulator-fixed";
  regulator-name = "vcc3v3_sys";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  vin-supply = <&vbus>;
 };

 vcc5v0_host: regulator-vcc5v0-host {
  compatible = "regulator-fixed";
  enable-active-high;
  gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&vcc5v0_host_en>;
  regulator-name = "vcc5v0_host3";
  regulator-always-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
 };

 vcc5v0_otg: regulator-vcc5v0-otg {
  compatible = "regulator-fixed";
  enable-active-high;
  gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&vcc5v0_otg_en>;
  regulator-name = "vcc5v0_otg3";
  regulator-always-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
 };

 vcc5v0_sys: regulator-vcc5v0-sys {
  compatible = "regulator-fixed";
  regulator-name = "vcc5v0_sys";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  vin-supply = <&vbus>;
 };

 vcc5v0_usb: regulator-vcc5v0-usb {
  compatible = "regulator-fixed";
  regulator-name = "vcc5v0_usb";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  vin-supply = <&vbus>;
 };

 vcc5v0_usb2b: regulator-vcc5v0-usb2b {
  compatible = "regulator-fixed";
  enable-active-high;
  gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&vcc5v0_usb2b_en>;
  regulator-name = "vcc5v0_usb2b";
  regulator-always-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
 };

 vcc5v0_usb2t: regulator-vcc5v0-usb2t {
  compatible = "regulator-fixed";
  enable-active-high;
  gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&vcc5v0_usb2t_en>;
  regulator-name = "vcc5v0_usb2t";
  regulator-always-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
 };

 vcc_5v: regulator-vcc-5v {
  compatible = "regulator-fixed";
  regulator-name = "vcc_5v";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  vin-supply = <&vcc12v_dcin>;
 };

 vcc_sd: regulator-vcc-sd {
  compatible = "regulator-fixed";
  regulator-max-microvolt = <3300000>;
  regulator-min-microvolt = <3300000>;
  regulator-name = "vcc_sd";
  vin-supply = <&vcc3v3_sys>;
 };
};

&combphy1 {
 status = "okay";
};

&combphy2 {
 status = "okay";
};

&cpu0 {
 cpu-supply = <&vdd_cpu>;
};

&cpu1 {
 cpu-supply = <&vdd_cpu>;
};

&cpu2 {
 cpu-supply = <&vdd_cpu>;
};

&cpu3 {
 cpu-supply = <&vdd_cpu>;
};

&gmac1 {
 assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
 assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
 assigned-clock-rates = <0>, <125000000>;
 clock_in_out = "input";
 phy-handle = <&rgmii_phy0>;
 phy-mode = "rgmii-id";
 pinctrl-names = "default";
 pinctrl-0 = <&gmac1m0_miim
   &gmac1m0_tx_bus2
   &gmac1m0_rx_bus2
   &gmac1m0_rgmii_clk
   &gmac1m0_clkinout
   &gmac1m0_rgmii_bus>;
 status = "okay";
};

&mdio1 {
 rgmii_phy0: phy@0 {
  compatible = "ethernet-phy-ieee802.3-c22";
  reset-delay-us = <20000>;
  reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
  reset-post-delay-us = <100000>;
  reg = <0x0>;
 };
};

&gpu {
 mali-supply = <&vdd_gpu>;
 status = "okay";
};

&hdmi {
 avdd-0v9-supply = <&vdda0v9_image>;
 avdd-1v8-supply = <&vcca1v8_image>;
 status = "okay";
};

&hdmi_in {
 hdmi_in_vp0: endpoint {
  remote-endpoint = <&vp0_out_hdmi>;
 };
};

&hdmi_out {
 hdmi_out_con: endpoint {
  remote-endpoint = <&hdmi_con_in>;
 };
};

&hdmi_sound {
 status = "okay";
};

&i2c0 {
 status = "okay";

 vdd_cpu: regulator@1c {
  compatible = "tcs,tcs4525";
  reg = <0x1c>;
  regulator-name = "vdd_cpu";
  regulator-min-microvolt = <712500>;
  regulator-max-microvolt = <1390000>;
  regulator-initial-mode = <1>;
  regulator-ramp-delay = <2300>;
  regulator-boot-on;
  regulator-always-on;
  vin-supply = <&vcc5v0_sys>;
  fcs,suspend-voltage-selector = <1>;

  regulator-state-mem {
   regulator-off-in-suspend;
  };
 };

 rk809: pmic@20 {
  compatible = "rockchip,rk809";
  reg = <0x20>;
  interrupt-parent = <&gpio0>;
  interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
  assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
  assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
  #clock-cells = <1>;
  clock-names = "mclk";
  clocks = <&cru I2S1_MCLKOUT_TX>;
  pinctrl-names = "default", "pmic-sleep",
    "pmic-power-off", "pmic-reset";
  pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
  #sound-dai-cells = <0>;
  system-power-controller;
  wakeup-source;

  vcc1-supply = <&vcc3v3_sys>;
  vcc2-supply = <&vcc3v3_sys>;
  vcc3-supply = <&vcc3v3_sys>;
  vcc4-supply = <&vcc3v3_sys>;
  vcc5-supply = <&vcc3v3_sys>;
  vcc6-supply = <&vcc3v3_sys>;
  vcc7-supply = <&vcc3v3_sys>;
  vcc8-supply = <&vcc3v3_sys>;
  vcc9-supply = <&vcc3v3_sys>;

  regulators {
   vdd_logic: DCDC_REG1 {
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <500000>;
    regulator-max-microvolt = <1350000>;
    regulator-ramp-delay = <6001>;
    regulator-initial-mode = <0x2>;
    regulator-name = "vdd_logic";

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdd_gpu: DCDC_REG2 {
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <500000>;
    regulator-max-microvolt = <1350000>;
    regulator-ramp-delay = <6001>;
    regulator-initial-mode = <0x2>;
    regulator-name = "vdd_gpu";

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_ddr: DCDC_REG3 {
    regulator-always-on;
    regulator-boot-on;
    regulator-initial-mode = <0x2>;
    regulator-name = "vcc_ddr";

    regulator-state-mem {
     regulator-on-in-suspend;
    };
   };

   vdd_npu: DCDC_REG4 {
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <500000>;
    regulator-max-microvolt = <1350000>;
    regulator-ramp-delay = <6001>;
    regulator-initial-mode = <0x2>;
    regulator-name = "vdd_npu";

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdda0v9_image: LDO_REG1 {
    regulator-boot-on;
    regulator-always-on;
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <900000>;
    regulator-name = "vdda0v9_image";

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdda_0v9: LDO_REG2 {
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <900000>;
    regulator-name = "vdda_0v9";

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdda0v9_pmu: LDO_REG3 {
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <900000>;
    regulator-name = "vdda0v9_pmu";

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <900000>;
    };
   };

   vccio_acodec: LDO_REG4 {
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <3000000>;
    regulator-max-microvolt = <3000000>;
    regulator-name = "vccio_acodec";

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vccio_sd: LDO_REG5 {
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;
    regulator-name = "vccio_sd";

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc3v3_pmu: LDO_REG6 {
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;
    regulator-name = "vcc3v3_pmu";

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <3300000>;
    };
   };

   vcca_1v8: LDO_REG7 {
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;
    regulator-name = "vcca_1v8";

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcca1v8_pmu: LDO_REG8 {
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;
    regulator-name = "vcca1v8_pmu";

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <1800000>;
    };
   };

   vcca1v8_image: LDO_REG9 {
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;
    regulator-name = "vcca1v8_image";

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_1v8: DCDC_REG5 {
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;
    regulator-name = "vcc_1v8";

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_3v3: SWITCH_REG1 {
    regulator-always-on;
    regulator-boot-on;
    regulator-name = "vcc_3v3";

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc3v3_sd: SWITCH_REG2 {
    regulator-always-on;
    regulator-boot-on;
    regulator-name = "vcc3v3_sd";

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };
  };

  codec {
   rockchip,mic-in-differential;
  };
 };
};

&i2c2 {
 pinctrl-0 = <&i2c2m1_xfer>;
};

&i2c3 {
 status = "okay";

 tft_tp: touchscreen@48 {
  compatible = "ti,tsc2007";
  reg = <0x48>;
  status = "okay";
  ti,x-plate-ohms = <660>;
  ti,rt-thr = <3000>;
  ti,fuzzx = <32>;
  ti,fuzzy = <16>;
 };
};

&i2s0_8ch {
 status = "okay";
};

&i2s1_8ch {
 pinctrl-names = "default";
 pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
 rockchip,trcm-sync-tx-only;
 status = "okay";
};

&spi1 {
 pinctrl-names = "default";
 pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;

 can_mcp2515: can@0 {
  compatible = "microchip,mcp2515";
  reg = <0x00>;
  clocks = <&can_mcp2515_osc>;
  interrupt-parent = <&gpio4>;
  interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
  pinctrl-names = "default";
  pinctrl-0 = <&mcp2515_int_pin>;
  spi-max-frequency = <10000000>;
  vdd-supply = <&vcc3v3_sys>;
  xceiver-supply = <&vcc3v3_sys>;
 };
};

&spi3 {
 pinctrl-names = "default";
 pinctrl-0 = <&spi3m1_cs0 &spi3m1_pins>;
};

&pcie2x1 {
 pinctrl-names = "default";
 pinctrl-0 = <&pcie_reset_h>;
 reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
 vpcie3v3-supply = <&vcc3v3_pcie>;
 status = "okay";
};

&pinctrl {
 bt {
  bt_enable: bt-enable-h {
   rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
  };

  bt_host_wake: bt-host-wake-l {
   rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
  };

  bt_wake: bt-wake-l {
   rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 pcie {
  pcie_drv: pcie-drv {
   rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  pcie_reset_h: pcie-reset-h {
   rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 pmic {
  pmic_int: pmic-int {
   rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
  };
 };

 sdio-pwrseq {
  wifi_enable_h: wifi-enable-h {
   rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  wifi_host_wake: wifi-host-wake-l {
   rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
  };
 };

 usb {
  vcc5v0_host_en: vcc5v0-host-en {
   rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  vcc5v0_otg_en: vcc5v0-otg-en {
   rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  vcc5v0_usb2t_en: vcc5v0-usb2t-en {
   rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  vcc5v0_usb2b_en: vcc5v0-usb2b-en {
   rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 work-led {
  heartbeat_led: led-heartbeat {
   rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  blue_led: led-blue {
   rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 mcp2515 {
  mcp2515_int_pin: mcp2515-int-pin {
   rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
  };
 };
};

&pmu_io_domains {
 pmuio1-supply = <&vcc3v3_pmu>;
 pmuio2-supply = <&vcc3v3_pmu>;
 vccio1-supply = <&vcc_3v3>;
 vccio2-supply = <&vcc_1v8>;
 vccio3-supply = <&vccio_sd>;
 vccio4-supply = <&vcc_1v8>;
 vccio5-supply = <&vcc_3v3>;
 vccio6-supply = <&vcc_3v3>;
 vccio7-supply = <&vcc_3v3>;
 status = "okay";
};

&pwm0 {
 pinctrl-names = "default";
 pinctrl-0 = <&pwm0m1_pins>;
};

&pwm12 {
 pinctrl-names = "default";
 pinctrl-0 = <&pwm12m1_pins>;
};

&pwm13 {
 pinctrl-names = "default";
 pinctrl-0 = <&pwm13m1_pins>;
};

&pwm14 {
 pinctrl-names = "default";
 pinctrl-0 = <&pwm14m1_pins>;
};

&pwm15 {
 pinctrl-names = "default";
 pinctrl-0 = <&pwm15m1_pins>;
};

&saradc {
 vref-supply = <&vcca_1v8>;
 status = "okay";
};

&sdhci {
 bus-width = <8>;
 max-frequency = <200000000>;
 non-removable;
 pinctrl-names = "default";
 pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
 status = "okay";
};

&sdmmc0 {
 max-frequency = <150000000>;
 bus-width = <4>;
 cap-mmc-highspeed;
 cap-sd-highspeed;
 disable-wp;
 pinctrl-names = "default";
 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
 vmmc-supply = <&vcc_sd>;
 vqmmc-supply = <&vccio_sd>;
 status = "okay";
};

&sdmmc1 {
 /* WiFi & BT combo module AMPAK AP6256 */
 #address-cells = <1>;
 #size-cells = <0>;
 bus-width = <4>;
 cap-sd-highspeed;
 cap-sdio-irq;
 disable-wp;
 keep-power-in-suspend;
 max-frequency = <150000000>;
 mmc-pwrseq = <&sdio_pwrseq>;
 non-removable;
 pinctrl-names = "default";
 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
 rockchip,default-sample-phase = <90>;
 status = "okay";

 wifi@1 {
  compatible = "brcm,bcm4329-fmac";
  reg = <1>;
  interrupt-parent = <&gpio2>;
  interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
  interrupt-names = "host-wake";
  pinctrl-names = "default";
  pinctrl-0 = <&wifi_host_wake>;
  brcm,drive-strength = <10>;
 };
};

&sfc {
 #address-cells = <1>;
 #size-cells = <0>;
 status = "okay";
};

&tsadc {
 status = "okay";
};

&uart1 {
 dma-names = "tx","rx";
 pinctrl-names = "default";
 pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
 uart-has-rtscts;
 status = "okay";

 bluetooth {
  compatible = "brcm,bcm4345c5";
  clocks = <&rk809 1>;
  clock-names = "lpo";
  device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
  host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
  shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>;
  vbat-supply = <&vcc3v3_sys>;
  vddio-supply = <&vcca1v8_pmu>;
 };
};

&uart2 {
 status = "okay";
};

&uart5 {
 pinctrl-names = "default";
 pinctrl-0 = <&uart5m1_xfer>;
};

&uart7 {
 pinctrl-names = "default";
 pinctrl-0 = <&uart7m2_xfer>;
};

&usb2phy0 {
 status = "okay";
};

&usb2phy0_host {
 phy-supply = <&vcc5v0_host>;
 status = "okay";
};

&usb2phy0_otg {
 phy-supply = <&vcc5v0_otg>;
 status = "okay";
};

&usb2phy1 {
 status = "okay";
};

&usb2phy1_host {
 phy-supply = <&vcc5v0_usb2t>;
 status = "okay";
};

&usb2phy1_otg {
 phy-supply = <&vcc5v0_usb2b>;
 status = "okay";
};

&usb_host0_ehci {
 status = "okay";
};

&usb_host0_ohci {
 status = "okay";
};

&usb_host0_xhci {
 dr_mode = "host";
 extcon = <&usb2phy0>;
 status = "okay";
};

&usb_host1_ehci {
 status = "okay";
};

&usb_host1_ohci {
 status = "okay";
};

&usb_host1_xhci {
 status = "okay";
};

&vop {
 assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
 assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
 status = "okay";
};

&vop_mmu {
 status = "okay";
};

&vp0 {
 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
  reg = <ROCKCHIP_VOP2_EP_HDMI0>;
  remote-endpoint = <&hdmi_in_vp0>;
 };
};