Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/gpu/drm/panel/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 6 kB image not shown  

Quelle  panel-nec-nl8048hl11.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0+
/*
 * NEC NL8048HL11 Panel Driver
 *
 * Copyright (C) 2019 Texas Instruments Incorporated
 *
 * Based on the omapdrm-specific panel-nec-nl8048hl11 driver
 *
 * Copyright (C) 2010 Texas Instruments Incorporated
 * Author: Erik Gilling <konkers@android.com>
 */


#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/spi/spi.h>

#include <drm/drm_connector.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>

struct nl8048_panel {
 struct drm_panel panel;

 struct spi_device *spi;
 struct gpio_desc *reset_gpio;
};

#define to_nl8048_device(p) container_of(p, struct nl8048_panel, panel)

static int nl8048_write(struct nl8048_panel *lcd, unsigned char addr,
   unsigned char value)
{
 u8 data[4] = { value, 0x01, addr, 0x00 };
 int ret;

 ret = spi_write(lcd->spi, data, sizeof(data));
 if (ret)
  dev_err(&lcd->spi->dev, "SPI write to %u failed: %d\n",
   addr, ret);

 return ret;
}

static int nl8048_init(struct nl8048_panel *lcd)
{
 static const struct {
  unsigned char addr;
  unsigned char data;
 } nl8048_init_seq[] = {
  {   3, 0x01 }, {   0, 0x00 }, {   1, 0x01 }, {   4, 0x00 },
  {   5, 0x14 }, {   6, 0x24 }, {  16, 0xd7 }, {  17, 0x00 },
  {  18, 0x00 }, {  19, 0x55 }, {  20, 0x01 }, {  21, 0x70 },
  {  22, 0x1e }, {  23, 0x25 }, {  24, 0x25 }, {  25, 0x02 },
  {  26, 0x02 }, {  27, 0xa0 }, {  32, 0x2f }, {  33, 0x0f },
  {  34, 0x0f }, {  35, 0x0f }, {  36, 0x0f }, {  37, 0x0f },
  {  38, 0x0f }, {  39, 0x00 }, {  40, 0x02 }, {  41, 0x02 },
  {  42, 0x02 }, {  43, 0x0f }, {  44, 0x0f }, {  45, 0x0f },
  {  46, 0x0f }, {  47, 0x0f }, {  48, 0x0f }, {  49, 0x0f },
  {  50, 0x00 }, {  51, 0x02 }, {  52, 0x02 }, {  53, 0x02 },
  {  80, 0x0c }, {  83, 0x42 }, {  84, 0x42 }, {  85, 0x41 },
  {  86, 0x14 }, {  89, 0x88 }, {  90, 0x01 }, {  91, 0x00 },
  {  92, 0x02 }, {  93, 0x0c }, {  94, 0x1c }, {  95, 0x27 },
  {  98, 0x49 }, {  99, 0x27 }, { 102, 0x76 }, { 103, 0x27 },
  { 112, 0x01 }, { 113, 0x0e }, { 114, 0x02 }, { 115, 0x0c },
  { 118, 0x0c }, { 121, 0x30 }, { 130, 0x00 }, { 131, 0x00 },
  { 132, 0xfc }, { 134, 0x00 }, { 136, 0x00 }, { 138, 0x00 },
  { 139, 0x00 }, { 140, 0x00 }, { 141, 0xfc }, { 143, 0x00 },
  { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 }, { 149, 0x00 },
  { 150, 0xfc }, { 152, 0x00 }, { 154, 0x00 }, { 156, 0x00 },
  { 157, 0x00 },
 };

 unsigned int i;
 int ret;

 for (i = 0; i < ARRAY_SIZE(nl8048_init_seq); ++i) {
  ret = nl8048_write(lcd, nl8048_init_seq[i].addr,
       nl8048_init_seq[i].data);
  if (ret < 0)
   return ret;
 }

 udelay(20);

 return nl8048_write(lcd, 2, 0x00);
}

static int nl8048_disable(struct drm_panel *panel)
{
 struct nl8048_panel *lcd = to_nl8048_device(panel);

 gpiod_set_value_cansleep(lcd->reset_gpio, 0);

 return 0;
}

static int nl8048_enable(struct drm_panel *panel)
{
 struct nl8048_panel *lcd = to_nl8048_device(panel);

 gpiod_set_value_cansleep(lcd->reset_gpio, 1);

 return 0;
}

static const struct drm_display_mode nl8048_mode = {
 /*  NEC PIX Clock Ratings MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz */
 .clock = 23800,
 .hdisplay = 800,
 .hsync_start = 800 + 6,
 .hsync_end = 800 + 6 + 1,
 .htotal = 800 + 6 + 1 + 4,
 .vdisplay = 480,
 .vsync_start = 480 + 3,
 .vsync_end = 480 + 3 + 1,
 .vtotal = 480 + 3 + 1 + 4,
 .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
 .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
 .width_mm = 89,
 .height_mm = 53,
};

static int nl8048_get_modes(struct drm_panel *panel,
       struct drm_connector *connector)
{
 struct drm_display_mode *mode;

 mode = drm_mode_duplicate(connector->dev, &nl8048_mode);
 if (!mode)
  return -ENOMEM;

 drm_mode_set_name(mode);
 drm_mode_probed_add(connector, mode);

 connector->display_info.width_mm = nl8048_mode.width_mm;
 connector->display_info.height_mm = nl8048_mode.height_mm;
 connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
       | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
       | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE;

 return 1;
}

static const struct drm_panel_funcs nl8048_funcs = {
 .disable = nl8048_disable,
 .enable = nl8048_enable,
 .get_modes = nl8048_get_modes,
};

static int __maybe_unused nl8048_suspend(struct device *dev)
{
 struct nl8048_panel *lcd = dev_get_drvdata(dev);

 nl8048_write(lcd, 2, 0x01);
 msleep(40);

 return 0;
}

static int __maybe_unused nl8048_resume(struct device *dev)
{
 struct nl8048_panel *lcd = dev_get_drvdata(dev);

 /* Reinitialize the panel. */
 spi_setup(lcd->spi);
 nl8048_write(lcd, 2, 0x00);
 nl8048_init(lcd);

 return 0;
}

static SIMPLE_DEV_PM_OPS(nl8048_pm_ops, nl8048_suspend, nl8048_resume);

static int nl8048_probe(struct spi_device *spi)
{
 struct nl8048_panel *lcd;
 int ret;

 lcd = devm_drm_panel_alloc(&spi->dev, struct nl8048_panel, panel,
       &nl8048_funcs, DRM_MODE_CONNECTOR_DPI);
 if (IS_ERR(lcd))
  return PTR_ERR(lcd);

 spi_set_drvdata(spi, lcd);
 lcd->spi = spi;

 lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
 if (IS_ERR(lcd->reset_gpio)) {
  dev_err(&spi->dev, "failed to parse reset gpio\n");
  return PTR_ERR(lcd->reset_gpio);
 }

 spi->mode = SPI_MODE_0;
 spi->bits_per_word = 32;

 ret = spi_setup(spi);
 if (ret < 0) {
  dev_err(&spi->dev, "failed to setup SPI: %d\n", ret);
  return ret;
 }

 ret = nl8048_init(lcd);
 if (ret < 0)
  return ret;

 drm_panel_add(&lcd->panel);

 return 0;
}

static void nl8048_remove(struct spi_device *spi)
{
 struct nl8048_panel *lcd = spi_get_drvdata(spi);

 drm_panel_remove(&lcd->panel);
 drm_panel_disable(&lcd->panel);
 drm_panel_unprepare(&lcd->panel);
}

static const struct of_device_id nl8048_of_match[] = {
 { .compatible = "nec,nl8048hl11", },
 { /* sentinel */ },
};

MODULE_DEVICE_TABLE(of, nl8048_of_match);

static const struct spi_device_id nl8048_ids[] = {
 { "nl8048hl11", 0 },
 { /* sentinel */ }
};

MODULE_DEVICE_TABLE(spi, nl8048_ids);

static struct spi_driver nl8048_driver = {
 .probe  = nl8048_probe,
 .remove  = nl8048_remove,
 .id_table = nl8048_ids,
 .driver  = {
  .name = "panel-nec-nl8048hl11",
  .pm = &nl8048_pm_ops,
  .of_match_table = nl8048_of_match,
 },
};

module_spi_driver(nl8048_driver);

MODULE_AUTHOR("Erik Gilling ");
MODULE_DESCRIPTION("NEC-NL8048HL11 Driver");
MODULE_LICENSE("GPL");

Messung V0.5
C=95 H=93 G=93

¤ Dauer der Verarbeitung: 0.1 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.