Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/gpu/drm/panel/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 7 kB image not shown  

Quelle  panel-samsung-ams581vf01.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (c) 2024, Danila Tikhonov <danila@jiaxyga.com>
 */


#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regulator/consumer.h>

#include <video/mipi_display.h>

#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
#include <drm/drm_probe_helper.h>

/* Manufacturer Command Set */
#define MCS_ACCESS_PROT_OFF 0xb0
#define MCS_PASSWD  0xf0

struct ams581vf01 {
 struct drm_panel panel;
 struct mipi_dsi_device *dsi;
 struct gpio_desc *reset_gpio;
 struct regulator_bulk_data *supplies;
};

static const struct regulator_bulk_data ams581vf01_supplies[] = {
 { .supply = "vdd3p3" },
 { .supply = "vddio" },
 { .supply = "vsn" },
 { .supply = "vsp" },
};

static inline struct ams581vf01 *to_ams581vf01(struct drm_panel *panel)
{
 return container_of(panel, struct ams581vf01, panel);
}

static void ams581vf01_reset(struct ams581vf01 *ctx)
{
 gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 usleep_range(10000, 11000);
 gpiod_set_value_cansleep(ctx->reset_gpio, 0);
 usleep_range(10000, 11000);
}

static int ams581vf01_on(struct ams581vf01 *ctx)
{
 struct mipi_dsi_device *dsi = ctx->dsi;
 struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };

 /* Sleep Out, Wait 10ms */
 mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
 usleep_range(10000, 11000);

 /* TE On */
 mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx, MIPI_DSI_DCS_TEAR_MODE_VBLANK);

 /* MIC Setting */
 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MCS_PASSWD, 0x5a, 0x5a); /* Unlock */
 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xeb, 0x17,
            0x41, 0x92,
            0x0e, 0x10,
            0x82, 0x5a);
 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MCS_PASSWD, 0xa5, 0xa5); /* Lock */

 /* Column & Page Address Setting */
 mipi_dsi_dcs_set_column_address_multi(&dsi_ctx, 0x0000, 0x0437);
 mipi_dsi_dcs_set_page_address_multi(&dsi_ctx, 0x0000, 0x0923);

 /* Brightness Setting */
 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);

 /* Horizontal & Vertical sync Setting */
 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MCS_PASSWD, 0x5a, 0x5a); /* Unlock */
 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MCS_ACCESS_PROT_OFF, 0x09);
 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xe8, 0x11, 0x30);
 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MCS_PASSWD, 0xa5, 0xa5); /* Lock */
 mipi_dsi_msleep(&dsi_ctx, 110);

 /* Display On */
 mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);

 return dsi_ctx.accum_err;
}

static void ams581vf01_off(struct ams581vf01 *ctx)
{
 struct mipi_dsi_device *dsi = ctx->dsi;
 struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };

 /* Display Off & Sleep In */
 mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
 mipi_dsi_msleep(&dsi_ctx, 20);
 mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);

 /* VCI operating mode change */
 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MCS_PASSWD, 0x5a, 0x5a); /* Unlock */
 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MCS_ACCESS_PROT_OFF, 0x05);
 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xf4, 0x01);
 mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MCS_PASSWD, 0xa5, 0xa5);  /* Lock */

 mipi_dsi_msleep(&dsi_ctx, 120);
}

static int ams581vf01_prepare(struct drm_panel *panel)
{
 struct ams581vf01 *ctx = to_ams581vf01(panel);
 int ret;

 ret = regulator_bulk_enable(ARRAY_SIZE(ams581vf01_supplies),
        ctx->supplies);
 if (ret < 0)
  return ret;

 ams581vf01_reset(ctx);

 ret = ams581vf01_on(ctx);
 if (ret < 0) {
  gpiod_set_value_cansleep(ctx->reset_gpio, 1);
  regulator_bulk_disable(ARRAY_SIZE(ams581vf01_supplies),
           ctx->supplies);
  return ret;
 }

 return 0;
}

static int ams581vf01_unprepare(struct drm_panel *panel)
{
 struct ams581vf01 *ctx = to_ams581vf01(panel);

 ams581vf01_off(ctx);

 gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 regulator_bulk_disable(ARRAY_SIZE(ams581vf01_supplies),
          ctx->supplies);

 return 0;
}

static const struct drm_display_mode ams581vf01_mode = {
 .clock = (1080 + 32 + 73 + 98) * (2340 + 8 + 1 + 8) * 60 / 1000,
 .hdisplay = 1080,
 .hsync_start = 1080 + 32,
 .hsync_end = 1080 + 32 + 73,
 .htotal = 1080 + 32 + 73 + 98,
 .vdisplay = 2340,
 .vsync_start = 2340 + 8,
 .vsync_end = 2340 + 8 + 1,
 .vtotal = 2340 + 8 + 1 + 8,
 .width_mm = 62,
 .height_mm = 134,
 .type = DRM_MODE_TYPE_DRIVER,
};

static int ams581vf01_get_modes(struct drm_panel *panel,
     struct drm_connector *connector)
{
 return drm_connector_helper_get_modes_fixed(connector, &ams581vf01_mode);
}

static const struct drm_panel_funcs ams581vf01_panel_funcs = {
 .prepare = ams581vf01_prepare,
 .unprepare = ams581vf01_unprepare,
 .get_modes = ams581vf01_get_modes,
};

static int ams581vf01_bl_update_status(struct backlight_device *bl)
{
 struct mipi_dsi_device *dsi = bl_get_data(bl);
 u16 brightness = backlight_get_brightness(bl);
 int ret;

 dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;

 ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
 if (ret < 0)
  return ret;

 dsi->mode_flags |= MIPI_DSI_MODE_LPM;

 return 0;
}

static const struct backlight_ops ams581vf01_bl_ops = {
 .update_status = ams581vf01_bl_update_status,
};

static struct backlight_device *
ams581vf01_create_backlight(struct mipi_dsi_device *dsi)
{
 struct device *dev = &dsi->dev;
 const struct backlight_properties props = {
  .type = BACKLIGHT_RAW,
  .brightness = 511,
  .max_brightness = 1023,
 };

 return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
      &ams581vf01_bl_ops, &props);
}

static int ams581vf01_probe(struct mipi_dsi_device *dsi)
{
 struct device *dev = &dsi->dev;
 struct ams581vf01 *ctx;
 int ret;

 ctx = devm_drm_panel_alloc(&dsi->dev, struct ams581vf01, panel,
       &ams581vf01_panel_funcs,
       DRM_MODE_CONNECTOR_DSI);
 if (IS_ERR(ctx))
  return PTR_ERR(ctx);

 ret = devm_regulator_bulk_get_const(&dsi->dev,
         ARRAY_SIZE(ams581vf01_supplies),
         ams581vf01_supplies,
         &ctx->supplies);
 if (ret < 0)
  return dev_err_probe(dev, ret, "Failed to get regulators\n");

 ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 if (IS_ERR(ctx->reset_gpio))
  return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
     "Failed to get reset-gpios\n");

 ctx->dsi = dsi;
 mipi_dsi_set_drvdata(dsi, ctx);

 dsi->lanes = 4;
 dsi->format = MIPI_DSI_FMT_RGB888;
 dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
     MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM;

 ctx->panel.prepare_prev_first = true;

 ctx->panel.backlight = ams581vf01_create_backlight(dsi);
 if (IS_ERR(ctx->panel.backlight))
  return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
     "Failed to create backlight\n");

 drm_panel_add(&ctx->panel);

 ret = devm_mipi_dsi_attach(dev, dsi);
 if (ret < 0) {
  drm_panel_remove(&ctx->panel);
  return dev_err_probe(dev, ret, "Failed to attach to DSI host\n");
 }

 return 0;
}

static void ams581vf01_remove(struct mipi_dsi_device *dsi)
{
 struct ams581vf01 *ctx = mipi_dsi_get_drvdata(dsi);

 drm_panel_remove(&ctx->panel);
}

static const struct of_device_id ams581vf01_of_match[] = {
 { .compatible = "samsung,ams581vf01" },
 { /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ams581vf01_of_match);

static struct mipi_dsi_driver ams581vf01_driver = {
 .probe = ams581vf01_probe,
 .remove = ams581vf01_remove,
 .driver = {
  .name = "panel-samsung-ams581vf01",
  .of_match_table = ams581vf01_of_match,
 },
};
module_mipi_dsi_driver(ams581vf01_driver);

MODULE_AUTHOR("Danila Tikhonov ");
MODULE_DESCRIPTION("DRM driver for SAMSUNG AMS581VF01 cmd mode dsi panel");
MODULE_LICENSE("GPL");

Messung V0.5
C=96 H=89 G=92

¤ Dauer der Verarbeitung: 0.1 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.