Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/input/misc/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 9 kB image not shown  

Quelle  hp_sdc_rtc.c   Sprache: C

 
/*
 * HP i8042 SDC + MSM-58321 BBRTC driver.
 *
 * Copyright (c) 2001 Brian S. Julin
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL").
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 *
 * References:
 * System Device Controller Microprocessor Firmware Theory of Operation
 *      for Part Number 1820-4784 Revision B.  Dwg No. A-1820-4784-2
 * efirtc.c by Stephane Eranian/Hewlett Packard
 *
 */


#include <linux/hp_sdc.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/time.h>
#include <linux/miscdevice.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/poll.h>
#include <linux/rtc.h>
#include <linux/mutex.h>
#include <linux/semaphore.h>

MODULE_AUTHOR("Brian S. Julin ");
MODULE_DESCRIPTION("HP i8042 SDC + MSM-58321 RTC Driver");
MODULE_LICENSE("Dual BSD/GPL");

#define RTC_VERSION "1.10d"

static unsigned long epoch = 2000;

static struct semaphore i8042tregs;

static void hp_sdc_rtc_isr (int irq, void *dev_id, 
       uint8_t status, uint8_t data) 
{
 return;
}

static int hp_sdc_rtc_do_read_bbrtc (struct rtc_time *rtctm)
{
 struct semaphore tsem;
 hp_sdc_transaction t;
 uint8_t tseq[91];
 int i;
 
 i = 0;
 while (i < 91) {
  tseq[i++] = HP_SDC_ACT_DATAREG |
   HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN;
  tseq[i++] = 0x01;   /* write i8042[0x70] */
    tseq[i]   = i / 7;   /* BBRTC reg address */
  i++;
  tseq[i++] = HP_SDC_CMD_DO_RTCR;  /* Trigger command   */
  tseq[i++] = 2;  /* expect 1 stat/dat pair back.   */
  i++; i++;               /* buffer for stat/dat pair       */
 }
 tseq[84] |= HP_SDC_ACT_SEMAPHORE;
 t.endidx =  91;
 t.seq =   tseq;
 t.act.semaphore = &tsem;
 sema_init(&tsem, 0);
 
 if (hp_sdc_enqueue_transaction(&t)) return -1;
 
 /* Put ourselves to sleep for results. */
 if (WARN_ON(down_interruptible(&tsem)))
  return -1;
 
 /* Check for nonpresence of BBRTC */
 if (!((tseq[83] | tseq[90] | tseq[69] | tseq[76] |
        tseq[55] | tseq[62] | tseq[34] | tseq[41] |
        tseq[20] | tseq[27] | tseq[6]  | tseq[13]) & 0x0f))
  return -1;

 memset(rtctm, 0, sizeof(struct rtc_time));
 rtctm->tm_year = (tseq[83] & 0x0f) + (tseq[90] & 0x0f) * 10;
 rtctm->tm_mon  = (tseq[69] & 0x0f) + (tseq[76] & 0x0f) * 10;
 rtctm->tm_mday = (tseq[55] & 0x0f) + (tseq[62] & 0x0f) * 10;
 rtctm->tm_wday = (tseq[48] & 0x0f);
 rtctm->tm_hour = (tseq[34] & 0x0f) + (tseq[41] & 0x0f) * 10;
 rtctm->tm_min  = (tseq[20] & 0x0f) + (tseq[27] & 0x0f) * 10;
 rtctm->tm_sec  = (tseq[6]  & 0x0f) + (tseq[13] & 0x0f) * 10;
 
 return 0;
}

static int hp_sdc_rtc_read_bbrtc (struct rtc_time *rtctm)
{
 struct rtc_time tm, tm_last;
 int i = 0;

 /* MSM-58321 has no read latch, so must read twice and compare. */

 if (hp_sdc_rtc_do_read_bbrtc(&tm_last)) return -1;
 if (hp_sdc_rtc_do_read_bbrtc(&tm)) return -1;

 while (memcmp(&tm, &tm_last, sizeof(struct rtc_time))) {
  if (i++ > 4) return -1;
  memcpy(&tm_last, &tm, sizeof(struct rtc_time));
  if (hp_sdc_rtc_do_read_bbrtc(&tm)) return -1;
 }

 memcpy(rtctm, &tm, sizeof(struct rtc_time));

 return 0;
}


static int64_t hp_sdc_rtc_read_i8042timer (uint8_t loadcmd, int numreg)
{
 hp_sdc_transaction t;
 uint8_t tseq[26] = {
  HP_SDC_ACT_PRECMD | HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN,
  0,
  HP_SDC_CMD_READ_T1, 2, 0, 0,
  HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN, 
  HP_SDC_CMD_READ_T2, 2, 0, 0,
  HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN, 
  HP_SDC_CMD_READ_T3, 2, 0, 0,
  HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN, 
  HP_SDC_CMD_READ_T4, 2, 0, 0,
  HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN, 
  HP_SDC_CMD_READ_T5, 2, 0, 0
 };

 t.endidx = numreg * 5;

 tseq[1] = loadcmd;
 tseq[t.endidx - 4] |= HP_SDC_ACT_SEMAPHORE; /* numreg assumed > 1 */

 t.seq =   tseq;
 t.act.semaphore = &i8042tregs;

 /* Sleep if output regs in use. */
 if (WARN_ON(down_interruptible(&i8042tregs)))
  return -1;

 if (hp_sdc_enqueue_transaction(&t)) {
  up(&i8042tregs);
  return -1;
 }
 
 /* Sleep until results come back. */
 if (WARN_ON(down_interruptible(&i8042tregs)))
  return -1;

 up(&i8042tregs);

 return (tseq[5] | 
  ((uint64_t)(tseq[10]) << 8)  | ((uint64_t)(tseq[15]) << 16) |
  ((uint64_t)(tseq[20]) << 24) | ((uint64_t)(tseq[25]) << 32));
}


/* Read the i8042 real-time clock */
static inline int hp_sdc_rtc_read_rt(struct timespec64 *res) {
 int64_t raw;
 uint32_t tenms; 
 unsigned int days;

 raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_RT, 5);
 if (raw < 0) return -1;

 tenms = (uint32_t)raw & 0xffffff;
 days  = (unsigned int)(raw >> 24) & 0xffff;

 res->tv_nsec = (long)(tenms % 100) * 10000 * 1000;
 res->tv_sec =  (tenms / 100) + (time64_t)days * 86400;

 return 0;
}


/* Read the i8042 fast handshake timer */
static inline int hp_sdc_rtc_read_fhs(struct timespec64 *res) {
 int64_t raw;
 unsigned int tenms;

 raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_FHS, 2);
 if (raw < 0) return -1;

 tenms = (unsigned int)raw & 0xffff;

 res->tv_nsec = (long)(tenms % 100) * 10000 * 1000;
 res->tv_sec  = (time64_t)(tenms / 100);

 return 0;
}


/* Read the i8042 match timer (a.k.a. alarm) */
static inline int hp_sdc_rtc_read_mt(struct timespec64 *res) {
 int64_t raw; 
 uint32_t tenms; 

 raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_MT, 3);
 if (raw < 0) return -1;

 tenms = (uint32_t)raw & 0xffffff;

 res->tv_nsec = (long)(tenms % 100) * 10000 * 1000;
 res->tv_sec  = (time64_t)(tenms / 100);

 return 0;
}


/* Read the i8042 delay timer */
static inline int hp_sdc_rtc_read_dt(struct timespec64 *res) {
 int64_t raw;
 uint32_t tenms;

 raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_DT, 3);
 if (raw < 0) return -1;

 tenms = (uint32_t)raw & 0xffffff;

 res->tv_nsec = (long)(tenms % 100) * 10000 * 1000;
 res->tv_sec  = (time64_t)(tenms / 100);

 return 0;
}


/* Read the i8042 cycle timer (a.k.a. periodic) */
static inline int hp_sdc_rtc_read_ct(struct timespec64 *res) {
 int64_t raw;
 uint32_t tenms;

 raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_CT, 3);
 if (raw < 0) return -1;

 tenms = (uint32_t)raw & 0xffffff;

 res->tv_nsec = (long)(tenms % 100) * 10000 * 1000;
 res->tv_sec  = (time64_t)(tenms / 100);

 return 0;
}

static int __maybe_unused hp_sdc_rtc_proc_show(struct seq_file *m, void *v)
{
#define YN(bit) ("no")
#define NY(bit) ("yes")
        struct rtc_time tm;
 struct timespec64 tv;

 memset(&tm, 0, sizeof(struct rtc_time));

 if (hp_sdc_rtc_read_bbrtc(&tm)) {
  seq_puts(m, "BBRTC\t\t: READ FAILED!\n");
 } else {
  seq_printf(m,
        "rtc_time\t: %ptRt\n"
        "rtc_date\t: %ptRd\n"
        "rtc_epoch\t: %04lu\n",
        &tm, &tm, epoch);
 }

 if (hp_sdc_rtc_read_rt(&tv)) {
  seq_puts(m, "i8042 rtc\t: READ FAILED!\n");
 } else {
  seq_printf(m, "i8042 rtc\t: %lld.%02ld seconds\n",
        (s64)tv.tv_sec, (long)tv.tv_nsec/1000000L);
 }

 if (hp_sdc_rtc_read_fhs(&tv)) {
  seq_puts(m, "handshake\t: READ FAILED!\n");
 } else {
  seq_printf(m, "handshake\t: %lld.%02ld seconds\n",
        (s64)tv.tv_sec, (long)tv.tv_nsec/1000000L);
 }

 if (hp_sdc_rtc_read_mt(&tv)) {
  seq_puts(m, "alarm\t\t: READ FAILED!\n");
 } else {
  seq_printf(m, "alarm\t\t: %lld.%02ld seconds\n",
        (s64)tv.tv_sec, (long)tv.tv_nsec/1000000L);
 }

 if (hp_sdc_rtc_read_dt(&tv)) {
  seq_puts(m, "delay\t\t: READ FAILED!\n");
 } else {
  seq_printf(m, "delay\t\t: %lld.%02ld seconds\n",
        (s64)tv.tv_sec, (long)tv.tv_nsec/1000000L);
 }

 if (hp_sdc_rtc_read_ct(&tv)) {
  seq_puts(m, "periodic\t: READ FAILED!\n");
 } else {
  seq_printf(m, "periodic\t: %lld.%02ld seconds\n",
        (s64)tv.tv_sec, (long)tv.tv_nsec/1000000L);
 }

        seq_printf(m,
                     "DST_enable\t: %s\n"
                     "BCD\t\t: %s\n"
                     "24hr\t\t: %s\n"
                     "square_wave\t: %s\n"
                     "alarm_IRQ\t: %s\n"
                     "update_IRQ\t: %s\n"
                     "periodic_IRQ\t: %s\n"
       "periodic_freq\t: %ld\n"
                     "batt_status\t: %s\n",
                     YN(RTC_DST_EN),
                     NY(RTC_DM_BINARY),
                     YN(RTC_24H),
                     YN(RTC_SQWE),
                     YN(RTC_AIE),
                     YN(RTC_UIE),
                     YN(RTC_PIE),
                     1UL,
                     1 ? "okay" : "dead");

        return 0;
#undef YN
#undef NY
}

static int __init hp_sdc_rtc_init(void)
{
 int ret;

#ifdef __mc68000__
 if (!MACH_IS_HP300)
  return -ENODEV;
#endif

 sema_init(&i8042tregs, 1);

 if ((ret = hp_sdc_request_timer_irq(&hp_sdc_rtc_isr)))
  return ret;

        proc_create_single("driver/rtc", 0, NULL, hp_sdc_rtc_proc_show);

 printk(KERN_INFO "HP i8042 SDC + MSM-58321 RTC support loaded "
    "(RTC v " RTC_VERSION ")\n");

 return 0;
}

static void __exit hp_sdc_rtc_exit(void)
{
 remove_proc_entry ("driver/rtc", NULL);
 hp_sdc_release_timer_irq(hp_sdc_rtc_isr);
        printk(KERN_INFO "HP i8042 SDC + MSM-58321 RTC support unloaded\n");
}

module_init(hp_sdc_rtc_init);
module_exit(hp_sdc_rtc_exit);

Messung V0.5
C=89 H=98 G=93

¤ Dauer der Verarbeitung: 0.1 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.