// SPDX-License-Identifier: GPL-2.0
/*
* I / O Processor ( IOP ) ADB Driver
* Written and ( C ) 1999 by Joshua M . Thompson ( funaho @ jurai . org )
* Based on via - cuda . c by Paul Mackerras .
*
* 1999 - 07 - 01 ( jmt ) - First implementation for new driver architecture .
*
* 1999 - 07 - 31 ( jmt ) - First working version .
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <asm /macintosh.h>
#include <asm /macints.h>
#include <asm /mac_iop.h>
#include <asm /adb_iop.h>
#include <linux/unaligned.h>
#include <linux/adb.h>
static struct adb_request *current_req;
static struct adb_request *last_req;
static unsigned int autopoll_devs;
static u8 autopoll_addr;
static enum adb_iop_state {
idle,
sending,
awaiting_reply
} adb_iop_state;
static void adb_iop_start(void );
static int adb_iop_probe(void );
static int adb_iop_init(void );
static int adb_iop_send_request(struct adb_request *, int );
static int adb_iop_write(struct adb_request *);
static int adb_iop_autopoll(int );
static void adb_iop_poll(void );
static int adb_iop_reset_bus(void );
/* ADB command byte structure */
#define ADDR_MASK 0 xF0
#define OP_MASK 0 x0C
#define TALK 0 x0C
struct adb_driver adb_iop_driver = {
.name = "ISM IOP" ,
.probe = adb_iop_probe,
.init = adb_iop_init,
.send_request = adb_iop_send_request,
.autopoll = adb_iop_autopoll,
.poll = adb_iop_poll,
.reset_bus = adb_iop_reset_bus
};
static void adb_iop_done(void )
{
struct adb_request *req = current_req;
adb_iop_state = idle;
req->complete = 1 ;
current_req = req->next;
if (req->done)
(*req->done)(req);
if (adb_iop_state == idle)
adb_iop_start();
}
/*
* Completion routine for ADB commands sent to the IOP .
*
* This will be called when a packet has been successfully sent .
*/
static void adb_iop_complete(struct iop_msg *msg)
{
unsigned long flags;
local_irq_save(flags);
adb_iop_state = awaiting_reply;
local_irq_restore(flags);
}
/*
* Listen for ADB messages from the IOP .
*
* This will be called when unsolicited IOP messages are received .
* These IOP messages can carry ADB autopoll responses and also occur
* after explicit ADB commands .
*/
static void adb_iop_listen(struct iop_msg *msg)
{
struct adb_iopmsg *amsg = (struct adb_iopmsg *)msg->message;
u8 addr = (amsg->cmd & ADDR_MASK) >> 4 ;
u8 op = amsg->cmd & OP_MASK;
unsigned long flags;
bool req_done = false ;
local_irq_save(flags);
/* Responses to Talk commands may be unsolicited as they are
* produced when the IOP polls devices . They are mostly timeouts .
*/
if (op == TALK && ((1 << addr) & autopoll_devs))
autopoll_addr = addr;
switch (amsg->flags & (ADB_IOP_EXPLICIT |
ADB_IOP_AUTOPOLL |
ADB_IOP_TIMEOUT)) {
case ADB_IOP_EXPLICIT:
case ADB_IOP_EXPLICIT | ADB_IOP_TIMEOUT:
if (adb_iop_state == awaiting_reply) {
struct adb_request *req = current_req;
if (req->reply_expected) {
req->reply_len = amsg->count + 1 ;
memcpy(req->reply, &amsg->cmd, req->reply_len);
}
req_done = true ;
}
break ;
case ADB_IOP_AUTOPOLL:
if (((1 << addr) & autopoll_devs) &&
amsg->cmd == ADB_READREG(addr, 0 ))
adb_input(&amsg->cmd, amsg->count + 1 , 1 );
break ;
}
msg->reply[0 ] = autopoll_addr ? ADB_IOP_AUTOPOLL : 0 ;
msg->reply[1 ] = 0 ;
msg->reply[2 ] = autopoll_addr ? ADB_READREG(autopoll_addr, 0 ) : 0 ;
iop_complete_message(msg);
if (req_done)
adb_iop_done();
local_irq_restore(flags);
}
/*
* Start sending an ADB packet , IOP style
*
* There isn ' t much to do other than hand the packet over to the IOP
* after encapsulating it in an adb_iopmsg .
*/
static void adb_iop_start(void )
{
struct adb_request *req;
struct adb_iopmsg amsg;
/* get the packet to send */
req = current_req;
if (!req)
return ;
/* The IOP takes MacII-style packets, so strip the initial
* ADB_PACKET byte .
*/
amsg.flags = ADB_IOP_EXPLICIT;
amsg.count = req->nbytes - 2 ;
/* amsg.data immediately follows amsg.cmd, effectively making
* & amsg . cmd a pointer to the beginning of a full ADB packet .
*/
memcpy(&amsg.cmd, req->data + 1 , req->nbytes - 1 );
req->sent = 1 ;
adb_iop_state = sending;
/* Now send it. The IOP manager will call adb_iop_complete
* when the message has been sent .
*/
iop_send_message(ADB_IOP, ADB_CHAN, req, sizeof (amsg), (__u8 *)&amsg,
adb_iop_complete);
}
static int adb_iop_probe(void )
{
if (!iop_ism_present)
return -ENODEV;
return 0 ;
}
static int adb_iop_init(void )
{
pr_info("adb: IOP ISM driver v0.4 for Unified ADB\n" );
iop_listen(ADB_IOP, ADB_CHAN, adb_iop_listen, "ADB" );
return 0 ;
}
static int adb_iop_send_request(struct adb_request *req, int sync)
{
int err;
err = adb_iop_write(req);
if (err)
return err;
if (sync) {
while (!req->complete)
adb_iop_poll();
}
return 0 ;
}
static int adb_iop_write(struct adb_request *req)
{
unsigned long flags;
if ((req->nbytes < 2 ) || (req->data[0 ] != ADB_PACKET)) {
req->complete = 1 ;
return -EINVAL;
}
req->next = NULL;
req->sent = 0 ;
req->complete = 0 ;
req->reply_len = 0 ;
local_irq_save(flags);
if (current_req) {
last_req->next = req;
last_req = req;
} else {
current_req = req;
last_req = req;
}
if (adb_iop_state == idle)
adb_iop_start();
local_irq_restore(flags);
return 0 ;
}
static void adb_iop_set_ap_complete(struct iop_msg *msg)
{
struct adb_iopmsg *amsg = (struct adb_iopmsg *)msg->message;
autopoll_devs = get_unaligned_be16(amsg->data);
if (autopoll_devs & (1 << autopoll_addr))
return ;
autopoll_addr = autopoll_devs ? (ffs(autopoll_devs) - 1 ) : 0 ;
}
static int adb_iop_autopoll(int devs)
{
struct adb_iopmsg amsg;
unsigned long flags;
unsigned int mask = (unsigned int )devs & 0 xFFFE;
local_irq_save(flags);
amsg.flags = ADB_IOP_SET_AUTOPOLL | (mask ? ADB_IOP_AUTOPOLL : 0 );
amsg.count = 2 ;
amsg.cmd = 0 ;
put_unaligned_be16(mask, amsg.data);
iop_send_message(ADB_IOP, ADB_CHAN, NULL, sizeof (amsg), (__u8 *)&amsg,
adb_iop_set_ap_complete);
local_irq_restore(flags);
return 0 ;
}
static void adb_iop_poll(void )
{
iop_ism_irq_poll(ADB_IOP);
}
static int adb_iop_reset_bus(void )
{
struct adb_request req;
/* Command = 0, Address = ignored */
adb_request(&req, NULL, ADBREQ_NOSEND, 1 , ADB_BUSRESET);
adb_iop_send_request(&req, 1 );
/* Don't want any more requests during the Global Reset low time. */
mdelay(3 );
return 0 ;
}
Messung V0.5 in Prozent C=96 H=93 G=94
¤ Dauer der Verarbeitung: 0.10 Sekunden
(vorverarbeitet am 2026-09-29)
¤
*© Formatika GbR, Deutschland