Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/net/wireless/ath/ath6kl/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 8 kB image not shown  

Quelle  hif.h

  Sprache: C
 

/*
 * Copyright (c) 2004-2011 Atheros Communications Inc.
 * Copyright (c) 2011 Qualcomm Atheros, Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */


#ifndef HIF_H
#define HIF_H

#include "common.h"
#include "core.h"

#include <linux/scatterlist.h>

#define BUS_REQUEST_MAX_NUM                64
#define HIF_MBOX_BLOCK_SIZE                128
#define HIF_MBOX0_BLOCK_SIZE               1

#define HIF_DMA_BUFFER_SIZE (32 * 1024)
#define CMD53_FIXED_ADDRESS 1
#define CMD53_INCR_ADDRESS  2

#define MAX_SCATTER_REQUESTS             4
#define MAX_SCATTER_ENTRIES_PER_REQ      16
#define MAX_SCATTER_REQ_TRANSFER_SIZE    (32 * 1024)

/* Mailbox address in SDIO address space */
#define HIF_MBOX_BASE_ADDR                 0x800
#define HIF_MBOX_WIDTH                     0x800

#define HIF_MBOX_END_ADDR  (HTC_MAILBOX_NUM_MAX * HIF_MBOX_WIDTH - 1)

/* version 1 of the chip has only a 12K extended mbox range */
#define HIF_MBOX0_EXT_BASE_ADDR  0x4000
#define HIF_MBOX0_EXT_WIDTH      (12*1024)

/* GMBOX addresses */
#define HIF_GMBOX_BASE_ADDR                0x7000
#define HIF_GMBOX_WIDTH                    0x4000

/* interrupt mode register */
#define CCCR_SDIO_IRQ_MODE_REG         0xF0

/* mode to enable special 4-bit interrupt assertion without clock */
#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ   (1 << 0)

/* HTC runs over mailbox 0 */
#define HTC_MAILBOX 0

#define ATH6KL_TARGET_DEBUG_INTR_MASK     0x01

/* FIXME: are these duplicates with MAX_SCATTER_ values in hif.h? */
#define ATH6KL_SCATTER_ENTRIES_PER_REQ            16
#define ATH6KL_MAX_TRANSFER_SIZE_PER_SCATTER      (16 * 1024)
#define ATH6KL_SCATTER_REQS                       4

#define ATH6KL_HIF_COMMUNICATION_TIMEOUT 1000

struct bus_request {
 struct list_head list;

 /* request data */
 u32 address;

 u8 *buffer;
 u32 length;
 u32 request;
 struct htc_packet *packet;
 int status;

 /* this is a scatter request */
 struct hif_scatter_req *scat_req;
};

/* direction of transfer (read/write) */
#define HIF_READ                    0x00000001
#define HIF_WRITE                   0x00000002
#define HIF_DIR_MASK                (HIF_READ | HIF_WRITE)

/*
 *     emode - This indicates the whether the command is to be executed in a
 *             blocking or non-blocking fashion (HIF_SYNCHRONOUS/
 *             HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
 *             implemented using the asynchronous mode allowing the bus
 *             driver to indicate the completion of operation through the
 *             registered callback routine. The requirement primarily comes
 *             from the contexts these operations get called from (a driver's
 *             transmit context or the ISR context in case of receive).
 *             Support for both of these modes is essential.
 */

#define HIF_SYNCHRONOUS             0x00000010
#define HIF_ASYNCHRONOUS            0x00000020
#define HIF_EMODE_MASK              (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)

/*
 *     dmode - An interface may support different kinds of commands based on
 *             the tradeoff between the amount of data it can carry and the
 *             setup time. Byte and Block modes are supported (HIF_BYTE_BASIS/
 *             HIF_BLOCK_BASIS). In case of latter, the data is rounded off
 *             to the nearest block size by padding. The size of the block is
 *             configurable at compile time using the HIF_BLOCK_SIZE and is
 *             negotiated with the target during initialization after the
 *             ATH6KL interrupts are enabled.
 */

#define HIF_BYTE_BASIS              0x00000040
#define HIF_BLOCK_BASIS             0x00000080
#define HIF_DMODE_MASK              (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)

/*
 *     amode - This indicates if the address has to be incremented on ATH6KL
 *             after every read/write operation (HIF?FIXED_ADDRESS/
 *             HIF_INCREMENTAL_ADDRESS).
 */

#define HIF_FIXED_ADDRESS           0x00000100
#define HIF_INCREMENTAL_ADDRESS     0x00000200
#define HIF_AMODE_MASK    (HIF_FIXED_ADDRESS | HIF_INCREMENTAL_ADDRESS)

#define HIF_WR_ASYNC_BYTE_INC     \
 (HIF_WRITE | HIF_ASYNCHRONOUS |    \
  HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)

#define HIF_WR_ASYNC_BLOCK_INC     \
 (HIF_WRITE | HIF_ASYNCHRONOUS |    \
  HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)

#define HIF_WR_SYNC_BYTE_FIX     \
 (HIF_WRITE | HIF_SYNCHRONOUS |    \
  HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)

#define HIF_WR_SYNC_BYTE_INC     \
 (HIF_WRITE | HIF_SYNCHRONOUS |    \
  HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)

#define HIF_WR_SYNC_BLOCK_INC     \
 (HIF_WRITE | HIF_SYNCHRONOUS |    \
  HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)

#define HIF_RD_SYNC_BYTE_INC      \
 (HIF_READ | HIF_SYNCHRONOUS |     \
  HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)

#define HIF_RD_SYNC_BYTE_FIX      \
 (HIF_READ | HIF_SYNCHRONOUS |     \
  HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)

#define HIF_RD_ASYNC_BLOCK_FIX      \
 (HIF_READ | HIF_ASYNCHRONOUS |     \
  HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)

#define HIF_RD_SYNC_BLOCK_FIX      \
 (HIF_READ | HIF_SYNCHRONOUS |     \
  HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)

struct hif_scatter_item {
 u8 *buf;
 int len;
 struct htc_packet *packet;
};

struct hif_scatter_req {
 struct list_head list;
 /* address for the read/write operation */
 u32 addr;

 /* request flags */
 u32 req;

 /* total length of entire transfer */
 u32 len;

 bool virt_scat;

 void (*complete) (struct htc_target *, struct hif_scatter_req *);
 int status;
 int scat_entries;

 struct bus_request *busrequest;
 struct scatterlist *sgentries;

 /* bounce buffer for upper layers to copy to/from */
 u8 *virt_dma_buf;

 u32 scat_q_depth;

 struct hif_scatter_item scat_list[];
};

struct ath6kl_irq_proc_registers {
 u8 host_int_status;
 u8 cpu_int_status;
 u8 error_int_status;
 u8 counter_int_status;
 u8 mbox_frame;
 u8 rx_lkahd_valid;
 u8 host_int_status2;
 u8 gmbox_rx_avail;
 __le32 rx_lkahd[2];
 __le32 rx_gmbox_lkahd_alias[2];
} __packed;

struct ath6kl_irq_enable_reg {
 u8 int_status_en;
 u8 cpu_int_status_en;
 u8 err_int_status_en;
 u8 cntr_int_status_en;
} __packed;

struct ath6kl_device {
 /* protects irq_proc_reg and irq_en_reg below */
 spinlock_t lock;
 struct ath6kl_irq_proc_registers irq_proc_reg;
 struct ath6kl_irq_enable_reg irq_en_reg;
 struct htc_target *htc_cnxt;
 struct ath6kl *ar;
};

struct ath6kl_hif_ops {
 int (*read_write_sync)(struct ath6kl *ar, u32 addr, u8 *buf,
          u32 len, u32 request);
 int (*write_async)(struct ath6kl *ar, u32 address, u8 *buffer,
      u32 length, u32 request, struct htc_packet *packet);

 void (*irq_enable)(struct ath6kl *ar);
 void (*irq_disable)(struct ath6kl *ar);

 struct hif_scatter_req *(*scatter_req_get)(struct ath6kl *ar);
 void (*scatter_req_add)(struct ath6kl *ar,
    struct hif_scatter_req *s_req);
 int (*enable_scatter)(struct ath6kl *ar);
 int (*scat_req_rw) (struct ath6kl *ar,
       struct hif_scatter_req *scat_req);
 void (*cleanup_scatter)(struct ath6kl *ar);
 int (*suspend)(struct ath6kl *ar, struct cfg80211_wowlan *wow);
 int (*resume)(struct ath6kl *ar);
 int (*diag_read32)(struct ath6kl *ar, u32 address, u32 *value);
 int (*diag_write32)(struct ath6kl *ar, u32 address, __le32 value);
 int (*bmi_read)(struct ath6kl *ar, u8 *buf, u32 len);
 int (*bmi_write)(struct ath6kl *ar, u8 *buf, u32 len);
 int (*power_on)(struct ath6kl *ar);
 int (*power_off)(struct ath6kl *ar);
 void (*stop)(struct ath6kl *ar);
 int (*pipe_send)(struct ath6kl *ar, u8 pipe, struct sk_buff *hdr_buf,
    struct sk_buff *buf);
 void (*pipe_get_default)(struct ath6kl *ar, u8 *pipe_ul, u8 *pipe_dl);
 int (*pipe_map_service)(struct ath6kl *ar, u16 service_id, u8 *pipe_ul,
    u8 *pipe_dl);
 u16 (*pipe_get_free_queue_number)(struct ath6kl *ar, u8 pipe);
};

int ath6kl_hif_setup(struct ath6kl_device *dev);
int ath6kl_hif_unmask_intrs(struct ath6kl_device *dev);
int ath6kl_hif_mask_intrs(struct ath6kl_device *dev);
int ath6kl_hif_poll_mboxmsg_rx(struct ath6kl_device *dev,
          u32 *lk_ahd, int timeout);
int ath6kl_hif_rx_control(struct ath6kl_device *dev, bool enable_rx);
int ath6kl_hif_disable_intrs(struct ath6kl_device *dev);

int ath6kl_hif_rw_comp_handler(void *context, int status);
int ath6kl_hif_intr_bh_handler(struct ath6kl *ar);

/* Scatter Function and Definitions */
int ath6kl_hif_submit_scat_req(struct ath6kl_device *dev,
          struct hif_scatter_req *scat_req, bool read);

#endif

Messung V0.5 in Prozent
C=92 H=94 G=92

¤ Dauer der Verarbeitung: 0.10 Sekunden  (vorverarbeitet am  2026-04-28) ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.