Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/net/wireless/marvell/libertas/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 5 kB image not shown  

Quelle  tx.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * This file contains the handling of TX in wlan driver.
 */

#include <linux/hardirq.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/sched.h>
#include <linux/export.h>
#include <net/cfg80211.h>

#include "host.h"
#include "radiotap.h"
#include "decl.h"
#include "defs.h"
#include "dev.h"
#include "mesh.h"

/**
 * convert_radiotap_rate_to_mv - converts Tx/Rx rates from IEEE80211_RADIOTAP_RATE
 * units (500 Kb/s) into Marvell WLAN format (see Table 8 in Section 3.2.1)
 *
 * @rate: Input rate
 * returns: Output Rate (0 if invalid)
 */

static u32 convert_radiotap_rate_to_mv(u8 rate)
{
 switch (rate) {
 case 2:  /*   1 Mbps */
  return 0 | (1 << 4);
 case 4:  /*   2 Mbps */
  return 1 | (1 << 4);
 case 11:  /* 5.5 Mbps */
  return 2 | (1 << 4);
 case 22:  /*  11 Mbps */
  return 3 | (1 << 4);
 case 12:  /*   6 Mbps */
  return 4 | (1 << 4);
 case 18:  /*   9 Mbps */
  return 5 | (1 << 4);
 case 24:  /*  12 Mbps */
  return 6 | (1 << 4);
 case 36:  /*  18 Mbps */
  return 7 | (1 << 4);
 case 48:  /*  24 Mbps */
  return 8 | (1 << 4);
 case 72:  /*  36 Mbps */
  return 9 | (1 << 4);
 case 96:  /*  48 Mbps */
  return 10 | (1 << 4);
 case 108:  /*  54 Mbps */
  return 11 | (1 << 4);
 }
 return 0;
}

/**
 * lbs_hard_start_xmit - checks the conditions and sends packet to IF
 * layer if everything is ok
 *
 * @skb: A pointer to skb which includes TX packet
 * @dev: A pointer to the &struct net_device
 * returns: 0 or -1
 */

netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
 unsigned long flags;
 struct lbs_private *priv = dev->ml_priv;
 struct txpd *txpd;
 char *p802x_hdr;
 uint16_t pkt_len;
 netdev_tx_t ret = NETDEV_TX_OK;

 /* We need to protect against the queues being restarted before
   we get round to stopping them */

 spin_lock_irqsave(&priv->driver_lock, flags);

 if (priv->surpriseremoved)
  goto free;

 if (!skb->len || (skb->len > MRVDRV_ETH_TX_PACKET_BUFFER_SIZE)) {
  lbs_deb_tx("tx err: skb length %d 0 or > %zd\n",
         skb->len, MRVDRV_ETH_TX_PACKET_BUFFER_SIZE);
  /* We'll never manage to send this one; drop it and return 'OK' */

  dev->stats.tx_dropped++;
  dev->stats.tx_errors++;
  goto free;
 }


 netif_stop_queue(priv->dev);
 if (priv->mesh_dev)
  netif_stop_queue(priv->mesh_dev);

 if (priv->tx_pending_len) {
  /* This can happen if packets come in on the mesh and eth
   device simultaneously -- there's no mutual exclusion on
   hard_start_xmit() calls between devices. */

  lbs_deb_tx("Packet on %s while busy\n", dev->name);
  ret = NETDEV_TX_BUSY;
  goto unlock;
 }

 priv->tx_pending_len = -1;
 spin_unlock_irqrestore(&priv->driver_lock, flags);

 lbs_deb_hex(LBS_DEB_TX, "TX Data", skb->data, min_t(unsigned int, skb->len, 100));

 txpd = (void *)priv->tx_pending_buf;
 memset(txpd, 0, sizeof(struct txpd));

 p802x_hdr = skb->data;
 pkt_len = skb->len;

 BUILD_BUG_ON(sizeof(txpd->tx_dest_addr) != ETH_ALEN);
 if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) {
  struct tx_radiotap_hdr *rtap_hdr = (void *)skb->data;

  /* set txpd fields from the radiotap header */
  txpd->tx_control = cpu_to_le32(convert_radiotap_rate_to_mv(rtap_hdr->rate));

  /* skip the radiotap header */
  p802x_hdr += sizeof(*rtap_hdr);
  pkt_len -= sizeof(*rtap_hdr);

  /* copy destination address from 802.11 header */
  memcpy(&txpd->tx_dest_addr, p802x_hdr + 4, ETH_ALEN);
 } else {
  /* copy destination address from 802.3 header */
  memcpy(&txpd->tx_dest_addr, p802x_hdr, ETH_ALEN);
 }

 txpd->tx_packet_length = cpu_to_le16(pkt_len);
 txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd));

 lbs_mesh_set_txpd(priv, dev, txpd);

 lbs_deb_hex(LBS_DEB_TX, "txpd", (u8 *) &txpd, sizeof(struct txpd));

 lbs_deb_hex(LBS_DEB_TX, "Tx Data", (u8 *) p802x_hdr, le16_to_cpu(txpd->tx_packet_length));

 memcpy(&txpd[1], p802x_hdr, le16_to_cpu(txpd->tx_packet_length));

 spin_lock_irqsave(&priv->driver_lock, flags);
 priv->tx_pending_len = pkt_len + sizeof(struct txpd);

 lbs_deb_tx("%s lined up packet\n", __func__);

 dev->stats.tx_packets++;
 dev->stats.tx_bytes += skb->len;

 if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR) {
  /* Keep the skb to echo it back once Tx feedback is
   received from FW */

  skb_orphan(skb);

  /* Keep the skb around for when we get feedback */
  priv->currenttxskb = skb;
 } else {
 free:
  dev_kfree_skb_any(skb);
 }

 unlock:
 spin_unlock_irqrestore(&priv->driver_lock, flags);
 wake_up(&priv->waitq);

 return ret;
}

/**
 * lbs_send_tx_feedback - sends to the host the last transmitted packet,
 * filling the radiotap headers with transmission information.
 *
 * @priv: A pointer to &struct lbs_private structure
 * @try_count: A 32-bit value containing transmission retry status.
 *
 * returns: void
 */

void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count)
{
 struct tx_radiotap_hdr *radiotap_hdr;

 if (priv->wdev->iftype != NL80211_IFTYPE_MONITOR ||
     priv->currenttxskb == NULL)
  return;

 radiotap_hdr = (struct tx_radiotap_hdr *)priv->currenttxskb->data;

 radiotap_hdr->data_retries = try_count ?
  (1 + priv->txretrycount - try_count) : 0;

 priv->currenttxskb->protocol = eth_type_trans(priv->currenttxskb,
            priv->dev);
 netif_rx(priv->currenttxskb);

 priv->currenttxskb = NULL;

 if (priv->connect_status == LBS_CONNECTED)
  netif_wake_queue(priv->dev);

 if (priv->mesh_dev && netif_running(priv->mesh_dev))
  netif_wake_queue(priv->mesh_dev);
}
EXPORT_SYMBOL_GPL(lbs_send_tx_feedback);

Messung V0.5
C=94 H=95 G=94

¤ Dauer der Verarbeitung: 0.34 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.