Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/include/linux/hsi/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 11 kB image not shown  

Quelle  hsi.h   Sprache: C

 
/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * HSI core header file.
 *
 * Copyright (C) 2010 Nokia Corporation. All rights reserved.
 *
 * Contact: Carlos Chinea <carlos.chinea@nokia.com>
 */


#ifndef __LINUX_HSI_H__
#define __LINUX_HSI_H__

#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/scatterlist.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/notifier.h>

/* HSI message ttype */
#define HSI_MSG_READ 0
#define HSI_MSG_WRITE 1

/* HSI configuration values */
enum {
 HSI_MODE_STREAM = 1,
 HSI_MODE_FRAME,
};

enum {
 HSI_FLOW_SYNC, /* Synchronized flow */
 HSI_FLOW_PIPE, /* Pipelined flow */
};

enum {
 HSI_ARB_RR, /* Round-robin arbitration */
 HSI_ARB_PRIO, /* Channel priority arbitration */
};

#define HSI_MAX_CHANNELS 16

/* HSI message status codes */
enum {
 HSI_STATUS_COMPLETED, /* Message transfer is completed */
 HSI_STATUS_PENDING, /* Message pending to be read/write (POLL) */
 HSI_STATUS_PROCEEDING, /* Message transfer is ongoing */
 HSI_STATUS_QUEUED, /* Message waiting to be served */
 HSI_STATUS_ERROR, /* Error when message transfer was ongoing */
};

/* HSI port event codes */
enum {
 HSI_EVENT_START_RX,
 HSI_EVENT_STOP_RX,
};

/**
 * struct hsi_channel - channel resource used by the hsi clients
 * @id: Channel number
 * @name: Channel name
 */

struct hsi_channel {
 unsigned int id;
 const char *name;
};

/**
 * struct hsi_config - Configuration for RX/TX HSI modules
 * @mode: Bit transmission mode (STREAM or FRAME)
 * @channels: Channel resources used by the client
 * @num_channels: Number of channel resources
 * @num_hw_channels: Number of channels the transceiver is configured for [1..16]
 * @speed: Max bit transmission speed (Kbit/s)
 * @flow: RX flow type (SYNCHRONIZED or PIPELINE)
 * @arb_mode: Arbitration mode for TX frame (Round robin, priority)
 */

struct hsi_config {
 unsigned int  mode;
 struct hsi_channel *channels;
 unsigned int  num_channels;
 unsigned int  num_hw_channels;
 unsigned int  speed;
 union {
  unsigned int flow;  /* RX only */
  unsigned int arb_mode; /* TX only */
 };
};

/**
 * struct hsi_board_info - HSI client board info
 * @name: Name for the HSI device
 * @hsi_id: HSI controller id where the client sits
 * @port: Port number in the controller where the client sits
 * @tx_cfg: HSI TX configuration
 * @rx_cfg: HSI RX configuration
 * @platform_data: Platform related data
 * @archdata: Architecture-dependent device data
 */

struct hsi_board_info {
 const char  *name;
 unsigned int  hsi_id;
 unsigned int  port;
 struct hsi_config tx_cfg;
 struct hsi_config rx_cfg;
 void   *platform_data;
 struct dev_archdata *archdata;
};

#ifdef CONFIG_HSI_BOARDINFO
extern int hsi_register_board_info(struct hsi_board_info const *info,
       unsigned int len);
#else
static inline int hsi_register_board_info(struct hsi_board_info const *info,
       unsigned int len)
{
 return 0;
}
#endif /* CONFIG_HSI_BOARDINFO */

/**
 * struct hsi_client - HSI client attached to an HSI port
 * @device: Driver model representation of the device
 * @tx_cfg: HSI TX configuration
 * @rx_cfg: HSI RX configuration
 */

struct hsi_client {
 struct device  device;
 struct hsi_config tx_cfg;
 struct hsi_config rx_cfg;
 /* private: */
 void   (*ehandler)(struct hsi_client *, unsigned long);
 unsigned int  pclaimed:1;
 struct notifier_block nb;
};

#define to_hsi_client(dev) container_of(dev, struct hsi_client, device)

static inline void hsi_client_set_drvdata(struct hsi_client *cl, void *data)
{
 dev_set_drvdata(&cl->device, data);
}

static inline void *hsi_client_drvdata(struct hsi_client *cl)
{
 return dev_get_drvdata(&cl->device);
}

int hsi_register_port_event(struct hsi_client *cl,
   void (*handler)(struct hsi_client *, unsigned long));
int hsi_unregister_port_event(struct hsi_client *cl);

/**
 * struct hsi_client_driver - Driver associated to an HSI client
 * @driver: Driver model representation of the driver
 */

struct hsi_client_driver {
 struct device_driver driver;
};

#define to_hsi_client_driver(drv) container_of(drv, struct hsi_client_driver,\
         driver)

int hsi_register_client_driver(struct hsi_client_driver *drv);

static inline void hsi_unregister_client_driver(struct hsi_client_driver *drv)
{
 driver_unregister(&drv->driver);
}

/**
 * struct hsi_msg - HSI message descriptor
 * @link: Free to use by the current descriptor owner
 * @cl: HSI device client that issues the transfer
 * @sgt: Head of the scatterlist array
 * @context: Client context data associated to the transfer
 * @complete: Transfer completion callback
 * @destructor: Destructor to free resources when flushing
 * @status: Status of the transfer when completed
 * @actual_len: Actual length of data transferred on completion
 * @channel: Channel were to TX/RX the message
 * @ttype: Transfer type (TX if set, RX otherwise)
 * @break_frame: if true HSI will send/receive a break frame. Data buffers are
 * ignored in the request.
 */

struct hsi_msg {
 struct list_head link;
 struct hsi_client *cl;
 struct sg_table  sgt;
 void   *context;

 void   (*complete)(struct hsi_msg *msg);
 void   (*destructor)(struct hsi_msg *msg);

 int   status;
 unsigned int  actual_len;
 unsigned int  channel;
 unsigned int  ttype:1;
 unsigned int  break_frame:1;
};

struct hsi_msg *hsi_alloc_msg(unsigned int n_frag, gfp_t flags);
void hsi_free_msg(struct hsi_msg *msg);

/**
 * struct hsi_port - HSI port device
 * @device: Driver model representation of the device
 * @tx_cfg: Current TX path configuration
 * @rx_cfg: Current RX path configuration
 * @num: Port number
 * @shared: Set when port can be shared by different clients
 * @claimed: Reference count of clients which claimed the port
 * @lock: Serialize port claim
 * @async: Asynchronous transfer callback
 * @setup: Callback to set the HSI client configuration
 * @flush: Callback to clean the HW state and destroy all pending transfers
 * @start_tx: Callback to inform that a client wants to TX data
 * @stop_tx: Callback to inform that a client no longer wishes to TX data
 * @release: Callback to inform that a client no longer uses the port
 * @n_head: Notifier chain for signaling port events to the clients.
 */

struct hsi_port {
 struct device   device;
 struct hsi_config  tx_cfg;
 struct hsi_config  rx_cfg;
 unsigned int   num;
 unsigned int   shared:1;
 int    claimed;
 struct mutex   lock;
 int    (*async)(struct hsi_msg *msg);
 int    (*setup)(struct hsi_client *cl);
 int    (*flush)(struct hsi_client *cl);
 int    (*start_tx)(struct hsi_client *cl);
 int    (*stop_tx)(struct hsi_client *cl);
 int    (*release)(struct hsi_client *cl);
 /* private */
 struct blocking_notifier_head n_head;
};

#define to_hsi_port(dev) container_of(dev, struct hsi_port, device)
#define hsi_get_port(cl) to_hsi_port((cl)->device.parent)

int hsi_event(struct hsi_port *port, unsigned long event);
int hsi_claim_port(struct hsi_client *cl, unsigned int share);
void hsi_release_port(struct hsi_client *cl);

static inline int hsi_port_claimed(struct hsi_client *cl)
{
 return cl->pclaimed;
}

static inline void hsi_port_set_drvdata(struct hsi_port *port, void *data)
{
 dev_set_drvdata(&port->device, data);
}

static inline void *hsi_port_drvdata(struct hsi_port *port)
{
 return dev_get_drvdata(&port->device);
}

/**
 * struct hsi_controller - HSI controller device
 * @device: Driver model representation of the device
 * @owner: Pointer to the module owning the controller
 * @id: HSI controller ID
 * @num_ports: Number of ports in the HSI controller
 * @port: Array of HSI ports
 */

struct hsi_controller {
 struct device  device;
 struct module  *owner;
 unsigned int  id;
 unsigned int  num_ports;
 struct hsi_port  **port;
};

#define to_hsi_controller(dev) container_of(dev, struct hsi_controller, device)

struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags);
void hsi_put_controller(struct hsi_controller *hsi);
int hsi_register_controller(struct hsi_controller *hsi);
void hsi_unregister_controller(struct hsi_controller *hsi);
struct hsi_client *hsi_new_client(struct hsi_port *port,
      struct hsi_board_info *info);
int hsi_remove_client(struct device *dev, void *data);
void hsi_port_unregister_clients(struct hsi_port *port);

#ifdef CONFIG_OF
void hsi_add_clients_from_dt(struct hsi_port *port,
        struct device_node *clients);
#else
static inline void hsi_add_clients_from_dt(struct hsi_port *port,
        struct device_node *clients)
{
 return;
}
#endif

static inline void hsi_controller_set_drvdata(struct hsi_controller *hsi,
        void *data)
{
 dev_set_drvdata(&hsi->device, data);
}

static inline void *hsi_controller_drvdata(struct hsi_controller *hsi)
{
 return dev_get_drvdata(&hsi->device);
}

static inline struct hsi_port *hsi_find_port_num(struct hsi_controller *hsi,
       unsigned int num)
{
 return (num < hsi->num_ports) ? hsi->port[num] : NULL;
}

/*
 * API for HSI clients
 */

int hsi_async(struct hsi_client *cl, struct hsi_msg *msg);

int hsi_get_channel_id_by_name(struct hsi_client *cl, char *name);

/**
 * hsi_id - Get HSI controller ID associated to a client
 * @cl: Pointer to a HSI client
 *
 * Return the controller id where the client is attached to
 */

static inline unsigned int hsi_id(struct hsi_client *cl)
{
 return to_hsi_controller(cl->device.parent->parent)->id;
}

/**
 * hsi_port_id - Gets the port number a client is attached to
 * @cl: Pointer to HSI client
 *
 * Return the port number associated to the client
 */

static inline unsigned int hsi_port_id(struct hsi_client *cl)
{
 return to_hsi_port(cl->device.parent)->num;
}

/**
 * hsi_setup - Configure the client's port
 * @cl: Pointer to the HSI client
 *
 * When sharing ports, clients should either relay on a single
 * client setup or have the same setup for all of them.
 *
 * Return -errno on failure, 0 on success
 */

static inline int hsi_setup(struct hsi_client *cl)
{
 if (!hsi_port_claimed(cl))
  return -EACCES;
 return hsi_get_port(cl)->setup(cl);
}

/**
 * hsi_flush - Flush all pending transactions on the client's port
 * @cl: Pointer to the HSI client
 *
 * This function will destroy all pending hsi_msg in the port and reset
 * the HW port so it is ready to receive and transmit from a clean state.
 *
 * Return -errno on failure, 0 on success
 */

static inline int hsi_flush(struct hsi_client *cl)
{
 if (!hsi_port_claimed(cl))
  return -EACCES;
 return hsi_get_port(cl)->flush(cl);
}

/**
 * hsi_async_read - Submit a read transfer
 * @cl: Pointer to the HSI client
 * @msg: HSI message descriptor of the transfer
 *
 * Return -errno on failure, 0 on success
 */

static inline int hsi_async_read(struct hsi_client *cl, struct hsi_msg *msg)
{
 msg->ttype = HSI_MSG_READ;
 return hsi_async(cl, msg);
}

/**
 * hsi_async_write - Submit a write transfer
 * @cl: Pointer to the HSI client
 * @msg: HSI message descriptor of the transfer
 *
 * Return -errno on failure, 0 on success
 */

static inline int hsi_async_write(struct hsi_client *cl, struct hsi_msg *msg)
{
 msg->ttype = HSI_MSG_WRITE;
 return hsi_async(cl, msg);
}

/**
 * hsi_start_tx - Signal the port that the client wants to start a TX
 * @cl: Pointer to the HSI client
 *
 * Return -errno on failure, 0 on success
 */

static inline int hsi_start_tx(struct hsi_client *cl)
{
 if (!hsi_port_claimed(cl))
  return -EACCES;
 return hsi_get_port(cl)->start_tx(cl);
}

/**
 * hsi_stop_tx - Signal the port that the client no longer wants to transmit
 * @cl: Pointer to the HSI client
 *
 * Return -errno on failure, 0 on success
 */

static inline int hsi_stop_tx(struct hsi_client *cl)
{
 if (!hsi_port_claimed(cl))
  return -EACCES;
 return hsi_get_port(cl)->stop_tx(cl);
}
#endif /* __LINUX_HSI_H__ */

Messung V0.5
C=91 H=98 G=94

¤ Dauer der Verarbeitung: 0.1 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.