# SPDX-License-Identifier: GPL-2.0-only # Helper to resolve issues with configs that have SPI enabled but I2C # modular, meaning we can't build the codec driver in with I2C support. # We use an ordered list of conditional defaults to pick the appropriate # setting - SPI can't be modular so that case doesn't need to be covered.
config SND_SOC_I2C_AND_SPI
tristate default m if I2C=m default y if I2C=y default y if SPI_MASTER=y
Support for the bus types used to access the codecs to be built must
be selected separately.
If unsure select "N".
config SND_SOC_88PM860X
tristate
depends on MFD_88PM860X
config SND_SOC_ARIZONA
tristate default y if SND_SOC_CS47L24=y default y if SND_SOC_WM5102=y default y if SND_SOC_WM5110=y default y if SND_SOC_WM8997=y default y if SND_SOC_WM8998=y default m if SND_SOC_CS47L24=m default m if SND_SOC_WM5102=m default m if SND_SOC_WM5110=m default m if SND_SOC_WM8997=m default m if SND_SOC_WM8998=m
config SND_SOC_WM_HUBS
tristate default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y default m if SND_SOC_WM8993=m || SND_SOC_WM8994=m
config SND_SOC_WM_ADSP
tristate
select FW_CS_DSP
select SND_SOC_COMPRESS default y if SND_SOC_MADERA=y default y if SND_SOC_CS47L24=y default y if SND_SOC_WM5102=y default y if SND_SOC_WM5110=y default y if SND_SOC_WM2200=y default y if SND_SOC_CS35L41_SPI=y default y if SND_SOC_CS35L41_I2C=y default y if SND_SOC_CS35L45_SPI=y default y if SND_SOC_CS35L45_I2C=y default y if SND_SOC_CS35L56=y default y if SND_SOC_CS48L32=y default m if SND_SOC_MADERA=m default m if SND_SOC_CS47L24=m default m if SND_SOC_WM5102=m default m if SND_SOC_WM5110=m default m if SND_SOC_WM2200=m default m if SND_SOC_CS35L41_SPI=m default m if SND_SOC_CS35L41_I2C=m default m if SND_SOC_CS35L45_SPI=m default m if SND_SOC_CS35L45_I2C=m default m if SND_SOC_CS35L56=m default m if SND_SOC_CS48L32=m
config SND_SOC_AB8500_CODEC
tristate
depends on ABX500_CORE
config SND_SOC_ADAU7118_HW
tristate "Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM Converter - HW Mode"
select SND_SOC_ADAU7118
help
Enable support for the Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM
Converter. In this mode, the device works in standalone mode which
means that there is no bus to communicate with it. Stereo mode is not
supported in this mode.
To compile this driver as a module, choose M here: the module
will be called snd-soc-adau7118-hw.
config SND_SOC_ADAU7118_I2C
tristate "Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM Converter - I2C"
depends on I2C
select SND_SOC_ADAU7118
select REGMAP_I2C
help
Enable support for the Analog Devices ADAU7118 8 Channel PDM-to-I2S/TDM
Converter over I2C. This gives full support over the device.
To compile this driver as a module, choose M here: the module
will be called snd-soc-adau7118-i2c.
config SND_SOC_ADAV80X
tristate
config SND_SOC_ADAV801
tristate
depends on SPI_MASTER
select SND_SOC_ADAV80X
config SND_SOC_ADAV803
tristate
depends on I2C
select SND_SOC_ADAV80X
config SND_SOC_ADS117X
tristate
config SND_SOC_AK4104
tristate "AKM AK4104 CODEC"
depends on SPI_MASTER
config SND_SOC_ALC5623
tristate "Realtek ALC5623 CODEC"
depends on I2C
config SND_SOC_ALC5632
tristate
depends on I2C
config SND_SOC_AUDIO_IIO_AUX
tristate "Audio IIO Auxiliary device"
depends on IIO
help
Enable support for Industrial I/O devices as audio auxiliary devices. This allows to have an IIO device present in the audio path and
controlled using mixer controls.
To compile this driver as a module, choose M here: the module
will be called snd-soc-audio-iio-aux.
config SND_SOC_AW8738
tristate "Awinic AW8738 Audio Amplifier"
select GPIOLIB
help
Enable support for the Awinic AW8738 audio amplifier (or similar).
The driver supports simple audio amplifiers similar to
SND_SOC_SIMPLE_AMPLIFIER, but additionally allows setting the
operation mode using the Awinic-specific one-wire pulse control.
config SND_SOC_AW88395_LIB
select CRC8
tristate
config SND_SOC_AW88395
tristate "Soc Audio for awinic aw88395"
depends on I2C
select CRC32
select REGMAP_I2C
select GPIOLIB
select SND_SOC_AW88395_LIB
help this option enables support for aw88395 Smart PA.
The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10V
smart boost convert.
config SND_SOC_AW88166
tristate "Soc Audio for awinic aw88166"
depends on I2C
select REGMAP_I2C
select GPIOLIB
select SND_SOC_AW88395_LIB
help This option enables support for aw88166 Smart PA.
The awinic AW88166 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with sound quality
enhancement algorithms and speaker protection.
config SND_SOC_AW88261
tristate "Soc Audio for awinic aw88261"
depends on I2C
select REGMAP_I2C
select GPIOLIB
select SND_SOC_AW88395_LIB
help This option enables support for aw88261 Smart PA.
The awinic AW88261 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier. The output voltage of
boost converter can be adjusted smartly according to
the input amplitude.
config SND_SOC_AW88081
tristate "Soc Audio for awinic aw88081/aw88083"
depends on I2C
select REGMAP_I2C
select SND_SOC_AW88395_LIB
help This option enables support for aw88081 Smart PA.
The awinic AW88081 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier. Due to its 9uV noise
floor and ultra-low distortion, clean listening is guaranteed.
config SND_SOC_AW87390
tristate "Soc Audio for awinic aw87390"
depends on I2C
select REGMAP_I2C
select SND_SOC_AW88395_LIB
help
The awinic aw87390 is specifically designed to improve
the musical output dynamic range, enhance the overall
sound quality, which is a new high efficiency, low
noise, constant large volume, 6th Smart K audio amplifier.
config SND_SOC_AW88399
tristate "Soc Audio for awinic aw88399"
depends on I2C
select CRC8
select REGMAP_I2C
select GPIOLIB
select SND_SOC_AW88395_LIB
help This option enables support for aw88399 Smart PA.
The awinic AW88399 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier and SKTune speaker
protection algorithms.
config SND_SOC_BD28623
tristate "ROHM BD28623 CODEC"
help
Enable support for ROHM BD28623MUV Class D speaker amplifier. This codec does not have any control buses such as I2C, it
detect format of I2S automatically.
config SND_SOC_CHV3_CODEC
tristate "Google Chameleon v3 codec driver"
help
Enable support for the Google Chameleon v3 audio codec. This codec does not have a control interface, it always outputs
8 channel S32_LE audio.
config SND_SOC_CROS_EC_CODEC
tristate "codec driver for ChromeOS EC"
depends on CROS_EC
select CRYPTO
select CRYPTO_LIB_SHA256
help If you say yes here you will get support for the
ChromeOS Embedded Controller's Audio Codec.
config SND_SOC_CS_AMP_LIB
tristate
config SND_SOC_CS_AMP_LIB_TEST
tristate "KUnit test for Cirrus Logic cs-amp-lib"if !KUNIT_ALL_TESTS
depends on SND_SOC_CS_AMP_LIB && KUNIT default KUNIT_ALL_TESTS
help This builds KUnit tests for the Cirrus Logic common
amplifier library. For more information on KUnit and unit tests in general,
please refer to the KUnit documentation in
Documentation/dev-tools/kunit/. If in doubt, say "N".
config SND_SOC_CS35L32
tristate "Cirrus Logic CS35L32 CODEC"
depends on I2C
config SND_SOC_CS35L33
tristate "Cirrus Logic CS35L33 CODEC"
depends on I2C
config SND_SOC_CS35L34
tristate "Cirrus Logic CS35L34 CODEC"
depends on I2C
config SND_SOC_CS35L35
tristate "Cirrus Logic CS35L35 CODEC"
depends on I2C
config SND_SOC_CS35L36
tristate "Cirrus Logic CS35L36 CODEC"
depends on I2C
config SND_SOC_CS35L56_I2C
tristate "Cirrus Logic CS35L56 CODEC (I2C)"
depends on I2C
depends on SOUNDWIRE || !SOUNDWIRE
select REGMAP_I2C
select SND_SOC_CS35L56
select SND_SOC_CS35L56_SHARED
help
Enable support for Cirrus Logic CS35L56 boosted amplifier with I2C control
config SND_SOC_CS35L56_SPI
tristate "Cirrus Logic CS35L56 CODEC (SPI)"
depends on SPI_MASTER
depends on SOUNDWIRE || !SOUNDWIRE
select REGMAP_SPI
select SND_SOC_CS35L56
select SND_SOC_CS35L56_SHARED
help
Enable support for Cirrus Logic CS35L56 boosted amplifier with SPI control
config SND_SOC_CS35L56_SDW
tristate "Cirrus Logic CS35L56 CODEC (SDW)"
depends on SOUNDWIRE
select REGMAP
select SND_SOC_CS35L56
select SND_SOC_CS35L56_SHARED
help
Enable support for Cirrus Logic CS35L56 boosted amplifier with SoundWire control
config SND_SOC_CS40L50
tristate "Cirrus Logic CS40L50 CODEC"
depends on MFD_CS40L50_CORE
help This option enables support for I2S streaming to Cirrus Logic CS40L50.
CS40L50 is a haptic driver with waveform memory, an integrated
DSP, and closed-loop algorithms. If built as a module, it will be
called snd-soc-cs40l50.
config SND_SOC_CS42L42_SDW
tristate "Cirrus Logic CS42L42 CODEC on Soundwire"
depends on SOUNDWIRE
select SND_SOC_CS42L42_CORE
help
Enable support for Cirrus Logic CS42L42 codec with Soundwire control
config SND_SOC_CS42L43
tristate "Cirrus Logic CS42L43 CODEC"
depends on MFD_CS42L43
help
Select this to support the audio functions of the Cirrus Logic
CS42L43 PC CODEC.
config SND_SOC_CS42L43_SDW
tristate "Cirrus Logic CS42L43 CODEC (SoundWire)"
depends on SND_SOC_CS42L43 && MFD_CS42L43_SDW
help
Select this to support the audio functions of the Cirrus Logic
CS42L43 PC CODEC over SoundWire.
# Cirrus Logic CS4270 Codec VD = 3.3V Errata # Select if you are affected by the errata where the part will not function # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will # not select any sample rates that require MCLK to be divided by 1.5.
config SND_SOC_CS4270_VD33_ERRATA bool
depends on SND_SOC_CS4270
config SND_SOC_CS47L15
tristate
depends on MFD_CS47L15
config SND_SOC_CS47L24
tristate
depends on MFD_CS47L24 && MFD_ARIZONA
config SND_SOC_CS47L35
tristate
depends on MFD_CS47L35
config SND_SOC_CS47L85
tristate
depends on MFD_CS47L85
config SND_SOC_CS47L90
tristate
depends on MFD_CS47L90
config SND_SOC_CS47L92
tristate
depends on MFD_CS47L92
config SND_SOC_CS48L32
tristate "Cirrus Logic CS48L32 audio DSP"
depends on SPI_MASTER
select REGMAP_SPI
help
Build the codec driver for the Cirrus Logic CS48L32 audio DSP.
config SND_SOC_CS530X_I2C
tristate "Cirrus Logic CS530x ADCs (I2C)"
depends on I2C
select REGMAP
select REGMAP_I2C
select SND_SOC_CS530X
help
Enable support for Cirrus Logic CS530X ADCs
with I2C control.
config SND_SOC_CX20442
tristate
depends on TTY
config SND_SOC_CX2072X
tristate "Conexant CX2072X CODEC"
depends on I2C
help
Enable support for Conexant CX20721 and CX20723 codec chips.
config SND_SOC_JZ4740_CODEC
depends on MACH_INGENIC || COMPILE_TEST
depends on OF
select REGMAP_MMIO
tristate "Ingenic JZ4740 internal CODEC"
help
Enable support for the internal CODEC found in the JZ4740 SoC
from Ingenic.
This driver can also be built as a module. If so, the module
will be called snd-soc-jz4740-codec.
config SND_SOC_JZ4725B_CODEC
depends on MACH_INGENIC || COMPILE_TEST
depends on OF
select REGMAP
tristate "Ingenic JZ4725B internal CODEC"
help
Enable support for the internal CODEC found in the JZ4725B SoC
from Ingenic.
This driver can also be built as a module. If so, the module
will be called snd-soc-jz4725b-codec.
config SND_SOC_JZ4760_CODEC
depends on MACH_INGENIC || COMPILE_TEST
depends on OF
select REGMAP
tristate "Ingenic JZ4760 internal CODEC"
help
Enable support for the internal CODEC found in the JZ4760 SoC
from Ingenic.
This driver can also be built as a module. If so, the module
will be called snd-soc-jz4760-codec.
config SND_SOC_JZ4770_CODEC
depends on MACH_INGENIC || COMPILE_TEST
depends on OF
select REGMAP
tristate "Ingenic JZ4770 internal CODEC"
help
Enable support for the internal CODEC found in the JZ4770 SoC
from Ingenic.
This driver can also be built as a module. If so, the module
will be called snd-soc-jz4770-codec.
config SND_SOC_DA7210
tristate
depends on SND_SOC_I2C_AND_SPI
config SND_SOC_DA7213
tristate "Dialog DA7213 CODEC"
depends on I2C
config SND_SOC_DA7218
tristate
depends on I2C
config SND_SOC_DA7219
tristate
depends on I2C
config SND_SOC_DA732X
tristate
depends on I2C
config SND_SOC_DA9055
tristate
depends on I2C
config SND_SOC_DMIC
tristate "Generic Digital Microphone CODEC"
help
Enable support for the Generic Digital Microphone CODEC.
Select thisif your sound card has DMICs.
config SND_SOC_ES8375
tristate "Everest Semi ES8375 CODEC"
depends on I2C
config SND_SOC_ES8389
tristate "Everest Semi ES8389 CODEC"
depends on I2C
config SND_SOC_FRAMER
tristate "Framer codec"
depends on GENERIC_FRAMER
help
Enable support for the framer codec.
The framer codec uses the generic framer infrastructure to transport
some audio data over an analog E1/T1/J1 line. This codec allows to use some of the time slots available on the TDM
bus on which the framer is connected to transport the audio data.
To compile this driver as a module, choose M here: the module
will be called snd-soc-framer.
config SND_SOC_HDA
tristate "HD-Audio codec driver"
select SND_HDA_EXT_CORE
select SND_HDA
help This enables HD-Audio codec support in ASoC subsystem. Compared
to SND_SOC_HDAC_HDA, driver's behavior is identical to HD-Audio
legacy solution - including the dynamic resource allocation
based on actual codec capabilities.
config SND_SOC_ICS43432
tristate "ICS43423 and compatible i2s microphones"
config SND_SOC_IDT821034
tristate "Renesas IDT821034 quad PCM codec"
depends on SPI
help
Enable support for the Renesas IDT821034 quad PCM with
programmable gain codec.
To compile this driver as a module, choose M here: the module
will be called snd-soc-idt821034.
config SND_SOC_INNO_RK3036
tristate "Inno codec driver for RK3036 SoC"
depends on ARCH_ROCKCHIP || COMPILE_TEST
select REGMAP_MMIO
config SND_SOC_ISABELLE
tristate
depends on I2C
config SND_SOC_LM49453
tristate
depends on I2C
config SND_SOC_LOCHNAGAR_SC
tristate "Lochnagar Sound Card"
depends on MFD_LOCHNAGAR || COMPILE_TEST
help This driver support the sound card functionality of the Cirrus
Logic Lochnagar audio development board.
config SND_SOC_MADERA
tristate default y if SND_SOC_CS47L15=y default y if SND_SOC_CS47L35=y default y if SND_SOC_CS47L85=y default y if SND_SOC_CS47L90=y default y if SND_SOC_CS47L92=y default m if SND_SOC_CS47L15=m default m if SND_SOC_CS47L35=m default m if SND_SOC_CS47L85=m default m if SND_SOC_CS47L90=m default m if SND_SOC_CS47L92=m
config SND_SOC_MAX98520
tristate "Maxim Integrated MAX98520 Speaker Amplifier"
depends on I2C
help
Enable support for Maxim Integrated MAX98520 audio
amplifier, which implements a tripler charge pump
based boost converter and supports sample rates of
8KHz to 192KHz.
To compile this driver as a module, choose M here.
config SND_SOC_MAX98363
tristate "Analog Devices MAX98363 Soundwire Speaker Amplifier"
depends on SOUNDWIRE
select REGMAP_SOUNDWIRE
help
Enable support for Analog Devices MAX98363 Soundwire
amplifier. MAX98363 supports the MIPI SoundWire v1.2
compatible interface for audio and control data. This amplifier does not support I2C and I2S.
config SND_SOC_MAX98373_SDW
tristate "Maxim Integrated MAX98373 Speaker Amplifier - SDW"
depends on SOUNDWIRE
select SND_SOC_MAX98373
select REGMAP_SOUNDWIRE
help
Enable support for Maxim Integrated MAX98373 Soundwire
amplifier. MAX98373 supports either the MIPI SoundWire
compatible interface for audio and control data, or
the PCM interface for audio data and a standard I2C
interface for control data. Select thisif MAX98373 is
connected via soundwire.
config SND_SOC_MAX98388
tristate "Analog Devices MAX98388 Speaker Amplifier"
depends on I2C
help
Enable support for Analog Devices MAX98388 audio
amplifier. The device provides a PCM interface for
audio data and a standard I2C interface for control
data communication.
config SND_SOC_MAX98396
tristate "Analog Devices MAX98396 Speaker Amplifier"
depends on I2C
help
Enable support for Analog Devices MAX98396 audio
amplifier. The device provides a PCM interface for
audio data and a standard I2C interface for control
data communication.
config SND_SOC_MSM8916_WCD_ANALOG
tristate "Qualcomm MSM8916 WCD Analog Codec"
depends on SPMI || COMPILE_TEST
config SND_SOC_MSM8916_WCD_DIGITAL
tristate "Qualcomm MSM8916 WCD DIGITAL Codec"
select REGMAP_MMIO
config SND_SOC_PCM1681
tristate "Texas Instruments PCM1681 CODEC"
depends on I2C
config SND_SOC_PCM1789
tristate
config SND_SOC_PCM1789_I2C
tristate "Texas Instruments PCM1789 CODEC (I2C)"
depends on I2C
select SND_SOC_PCM1789
help
Enable support for Texas Instruments PCM1789 CODEC.
Select thisif your PCM1789 is connected via an I2C bus.
config SND_SOC_PCM179X
tristate
config SND_SOC_PCM179X_I2C
tristate "Texas Instruments PCM179X CODEC (I2C)"
depends on I2C
select SND_SOC_PCM179X
help
Enable support for Texas Instruments PCM179x CODEC.
Select thisif your PCM179x is connected via an I2C bus.
config SND_SOC_PCM179X_SPI
tristate "Texas Instruments PCM179X CODEC (SPI)"
depends on SPI_MASTER
select SND_SOC_PCM179X
help
Enable support for Texas Instruments PCM179x CODEC.
Select thisif your PCM179x is connected via an SPI bus.
config SND_SOC_PCM6240
tristate "Texas Instruments PCM6240 Family Audio chips based on I2C"
depends on I2C
help
Enable support for Texas Instruments PCM6240 Family Audio chips.
Note the PCM6240 driver implements a flexible and configurable
setting forregisterand filter coefficients, to one, two or
even multiple PCM6240 Family Audio chips.
config SND_SOC_PEB2466
tristate "Infineon PEB2466 quad PCM codec"
depends on SPI
select REGMAP_SPI
help
Enable support for the Infineon PEB2466 quad PCM codec,
also named SICOFI 4-uC.
To compile this driver as a module, choose M here: the module
will be called snd-soc-peb2466.
config SND_SOC_RK3308
tristate "Rockchip RK3308 audio CODEC"
depends on ARM64 || COMPILE_TEST
depends on ARCH_ROCKCHIP || COMPILE_TEST
select REGMAP_MMIO
help This is a device driver for the audio codec embedded in the
Rockchip RK3308 SoC.
It has 8 24-bit ADCs and 2 24-bit DACs. The maximum supported
sampling rate is 192 kHz.
config SND_SOC_RL6231
tristate default y if SND_SOC_RT5514=y default y if SND_SOC_RT5616=y default y if SND_SOC_RT5640=y default y if SND_SOC_RT5645=y default y if SND_SOC_RT5651=y default y if SND_SOC_RT5659=y default y if SND_SOC_RT5660=y default y if SND_SOC_RT5663=y default y if SND_SOC_RT5665=y default y if SND_SOC_RT5668=y default y if SND_SOC_RT5670=y default y if SND_SOC_RT5677=y default y if SND_SOC_RT5682=y default y if SND_SOC_RT1011=y default y if SND_SOC_RT1015=y default y if SND_SOC_RT1015P=y default y if SND_SOC_RT1019=y default y if SND_SOC_RT1305=y default y if SND_SOC_RT1308=y default m if SND_SOC_RT5514=m default m if SND_SOC_RT5616=m default m if SND_SOC_RT5640=m default m if SND_SOC_RT5645=m default m if SND_SOC_RT5651=m default m if SND_SOC_RT5659=m default m if SND_SOC_RT5660=m default m if SND_SOC_RT5663=m default m if SND_SOC_RT5665=m default m if SND_SOC_RT5668=m default m if SND_SOC_RT5670=m default m if SND_SOC_RT5677=m default m if SND_SOC_RT5682=m default m if SND_SOC_RT1011=m default m if SND_SOC_RT1015=m default m if SND_SOC_RT1015P=m default m if SND_SOC_RT1019=m default m if SND_SOC_RT1305=m default m if SND_SOC_RT1308=m
config SND_SOC_RT_SDW_COMMON
tristate default y if SND_SOC_RT721_SDCA_SDW=y default m if SND_SOC_RT721_SDCA_SDW=m
config SND_SOC_RL6347A
tristate default y if SND_SOC_RT274=y default y if SND_SOC_RT286=y default y if SND_SOC_RT298=y default m if SND_SOC_RT274=m default m if SND_SOC_RT286=m default m if SND_SOC_RT298=m
config SND_SOC_RT9120
tristate "Richtek RT9120 Stereo Class-D Amplifier"
depends on I2C
select REGMAP_I2C
help
Enable support for Richtek RT9120 20W, stereo, inductor-less,
high-efficiency Class-D audio amplifier.
config SND_SOC_RT9123
tristate "Richtek RT9123 Mono Class-D Amplifier"
depends on I2C
select REGMAP_I2C
help
Enable support for the I2C control mode of Richtek RT9123 3.2W mono
Class-D audio amplifier.
config SND_SOC_RT9123P
tristate "Richtek RT9123P Mono Class-D Amplifier"
help
Enable support for the HW control mode of Richtek RT9123P 3.2W mono
Class-D audio amplifier.
config SND_SOC_RTQ9124
tristate "Richtek RTQ9124 Mono Class-D Amplifier"
depends on I2C
select REGMAP
help
Enable support for Richtek RTQ9124 1x30W digital input automotive
audio amplifier with current sense and real-time load diagnostics.
config SND_SOC_RTQ9128
tristate "Richtek RTQ9128 45W Digital Input Amplifier"
depends on I2C
select REGMAP
help
Enable support for Richtek RTQ9128 digital input 4-channel
automotive audio amplifier. It is a ultra-low output noise,
high-efficiency, four-channel class-D audio power amplifier
that can deliver over 87% power efficienty at 4x75W into 4Ohm,
25V supply in automotive applications.
To compile this driver as a module, choose M here: the module
will be called snd-soc-rtq9128.
config SND_SOC_SDW_MOCKUP
tristate "SoundWire mockup codec"
depends on EXPERT
depends on SOUNDWIRE
help This option enables a SoundWire mockup codec that does not drive the
bus, take part in the command/command protocol or generate data on a
Source port. This option is only intended to be used for tests on a device
with a connector, in combination with a bus analyzer, or to test new
topologies that differ from the actual hardware layout. This mockup device could be totally virtual but could also be a
real physical one with one key restriction: it is not allowed by the
SoundWire specification to be configured via a sideband mechanism and
generate audio data for capture. However, nothing prevents such a
peripheral device from snooping the bus.
config SND_SOC_SIMPLE_MUX
tristate "Simple Audio Mux"
depends on GPIOLIB
config SND_SOC_SMA1303
tristate "Iron Device SMA1303 Audio Amplifier"
depends on I2C
help
Enable support for Iron Device SMA1303 Boosted Class-D amplifier
config SND_SOC_SMA1307
tristate "Iron Device SMA1307 Audio Amplifier"
depends on I2C
help
Enable support for Iron Device SMA1307 boosted digital speaker
amplifier with feedback-loop. If you are using a system with an SMA1307 amplifier connected
via I2C, enable this option.
config SND_SOC_SPDIF
tristate "S/PDIF CODEC"
config SND_SOC_SRC4XXX_I2C
tristate "Texas Instruments SRC4XXX DIR/DIT and SRC codecs"
depends on I2C
select SND_SOC_SRC4XXX
help
Enable support for the TI SRC4XXX family of codecs. These include the
scr4392 which has digital receivers, transmitters, and
a sample rate converter, including numerous ports.
config SND_SOC_SRC4XXX
tristate
config SND_SOC_SSM2305
tristate "Analog Devices SSM2305 Class-D Amplifier"
help
Enable support for Analog Devices SSM2305 filterless
high-efficiency mono Class-D audio power amplifiers.
config SND_SOC_TAS2780
tristate "Texas Instruments TAS2780 Mono Audio amplifier"
depends on I2C
help
Enable support for Texas Instruments TAS2780 high-efficiency
digital input mono Class-D audio power amplifiers.
config SND_SOC_TAS2781_COMLIB
tristate
config SND_SOC_TAS2781_COMLIB_I2C
depends on I2C
select CRC8
select REGMAP_I2C
tristate
config SND_SOC_TAS2781_FMWLIB
select SND_SOC_TAS2781_COMLIB
select CRC8
tristate default n
config SND_SOC_TAS2781_I2C
tristate "Texas Instruments TAS2781 speaker amplifier based on I2C"
depends on I2C
select SND_SOC_TAS2781_COMLIB_I2C
select SND_SOC_TAS2781_FMWLIB
help
Enable support for Texas Instruments TAS2781 Smart Amplifier
Digital input mono Class-D and DSP-inside audio power amplifiers.
Note the TAS2781 driver implements a flexible and configurable
algo coefficient setting, for one, two or even multiple TAS2781
chips.
config SND_SOC_TAS571X
tristate "Texas Instruments TAS571x power amplifiers"
depends on I2C
help
Enable support for Texas Instruments TAS5707, TAS5711, TAS5717,
TAS5719 and TAS5721 power amplifiers
config SND_SOC_TAS5720
tristate "Texas Instruments TAS5720 Mono Audio amplifier"
depends on I2C
help
Enable support for Texas Instruments TAS5720L/M high-efficiency mono
Class-D audio power amplifiers.
config SND_SOC_TAS5805M
tristate "Texas Instruments TAS5805M speaker amplifier"
depends on I2C
help
Enable support for Texas Instruments TAS5805M Class-D
amplifiers. This is a speaker amplifier with an integrated
DSP. DSP configuration for each instance needs to be supplied
via a device-tree attribute.
config SND_SOC_TAS6424
tristate "Texas Instruments TAS6424 Quad-Channel Audio amplifier"
depends on I2C
help
Enable support for Texas Instruments TAS6424 high-efficiency
digital input quad-channel Class-D audio power amplifiers.
config SND_SOC_TFA9879
tristate "NXP Semiconductors TFA9879 amplifier"
depends on I2C
config SND_SOC_TFA989X
tristate "NXP/Goodix TFA989X (TFA1) amplifiers"
depends on I2C
select REGMAP_I2C
help
Enable support for NXP (now Goodix) TFA989X (TFA1 family) speaker
amplifiers, e.g. TFA9895.
Note that the driver currently bypasses the built-in "CoolFlux DSP" and does not support (hardware) volume control.
config SND_SOC_TLV320ADC3XXX
tristate "Texas Instruments TLV320ADC3001/3101 audio ADC"
depends on I2C
depends on GPIOLIB
help
Enable support for Texas Instruments TLV320ADC3001 and TLV320ADC3101
ADCs.
config SND_SOC_TLV320DAC33
tristate
depends on I2C
config SND_SOC_TLV320ADCX140
tristate "Texas Instruments TLV320ADCX140 CODEC family"
depends on I2C
select REGMAP_I2C
help
Add support for Texas Instruments tlv320adc3140, tlv320adc5140 and
tlv320adc6140 quad channel ADCs.
config SND_SOC_TS3A227E
tristate "TI Headset/Mic detect and keypress chip"
depends on I2C
config SND_SOC_TSCS42XX
tristate "Tempo Semiconductor TSCS42xx CODEC"
depends on I2C
select REGMAP_I2C
help
Add support for Tempo Semiconductor's TSCS42xx audio CODEC.
config SND_SOC_TSCS454
tristate "Tempo Semiconductor TSCS454 CODEC"
depends on I2C
select REGMAP_I2C
help
Add support for Tempo Semiconductor's TSCS454 audio CODEC.
config SND_SOC_TWL4030
tristate
depends on TWL4030_CORE
select MFD_TWL4030_AUDIO
config SND_SOC_TWL6040
tristate
depends on TWL6040_CORE
config SND_SOC_UDA1334
tristate "NXP UDA1334 DAC"
depends on GPIOLIB
help
The UDA1334 is an NXP audio codec, supports the I2S-bus data format and has basic features such as de-emphasis (at 44.1 kHz sampling
rate) and mute.
config SND_SOC_UDA1342
tristate "NXP UDA1342 CODEC"
depends on I2C
help
The UDA1342 is an NXP audio codec, support 2x Stereo audio ADC (4x PGA
mic inputs), stereo audio DAC, with basic audio processing.
config SND_SOC_UDA1380
tristate
depends on I2C
config SND_SOC_WCD_CLASSH
tristate
config SND_SOC_WCD9335
tristate "WCD9335 Codec"
depends on SLIMBUS
select REGMAP_SLIMBUS
select REGMAP_IRQ
select SND_SOC_WCD_CLASSH
help
The WCD9335 is a standalone Hi-Fi audio CODEC IC, supports
Qualcomm Technologies, Inc. (QTI) multimedia solutions,
including the MSM8996, MSM8976, and MSM8956 chipsets.
config SND_SOC_WCD_MBHC
tristate
config SND_SOC_WCD934X
tristate "WCD9340/WCD9341 Codec"
depends on COMMON_CLK
depends on SLIMBUS
select REGMAP_IRQ
select REGMAP_SLIMBUS
select SND_SOC_WCD_CLASSH
select SND_SOC_WCD_MBHC
depends on MFD_WCD934X || COMPILE_TEST
help
The WCD9340/9341 is a audio codec IC Integrated in
Qualcomm SoCs like SDM845.
config SND_SOC_WCD937X
depends on SND_SOC_WCD937X_SDW
tristate
depends on SOUNDWIRE || !SOUNDWIRE
select SND_SOC_WCD_CLASSH
config SND_SOC_WCD937X_SDW
tristate "WCD9370/WCD9375 Codec - SDW"
select SND_SOC_WCD937X
select SND_SOC_WCD_MBHC
select REGMAP_IRQ
depends on SOUNDWIRE
select REGMAP_SOUNDWIRE
help
The WCD9370/9375 is an audio codec IC used with SoCs
like SC7280 or QCM6490 chipsets, and it connected
via soundwire.
To compile this codec driver say Y or m.
config SND_SOC_WCD938X
depends on SND_SOC_WCD938X_SDW
tristate
depends on SOUNDWIRE || !SOUNDWIRE
select SND_SOC_WCD_CLASSH
select MULTIPLEXER
config SND_SOC_WCD938X_SDW
tristate "WCD9380/WCD9385 Codec - SDW"
select SND_SOC_WCD938X
select SND_SOC_WCD_MBHC
select REGMAP_IRQ
depends on SOUNDWIRE
select REGMAP_SOUNDWIRE
help
The WCD9380/9385 is a audio codec IC Integrated in
Qualcomm SoCs like SM8250.
config SND_SOC_WCD939X
depends on SND_SOC_WCD939X_SDW
tristate
depends on SOUNDWIRE || !SOUNDWIRE
depends on TYPEC || !TYPEC
select SND_SOC_WCD_CLASSH
config SND_SOC_WCD939X_SDW
tristate "WCD9390/WCD9395 Codec - SDW"
depends on TYPEC || !TYPEC
select SND_SOC_WCD939X
select SND_SOC_WCD_MBHC
select REGMAP_IRQ
depends on SOUNDWIRE
select REGMAP_SOUNDWIRE
help
The WCD9390/9395 is a audio codec IC Integrated in
Qualcomm SoCs like SM8650.
config SND_SOC_WL1273
tristate
config SND_SOC_WM0010
tristate
depends on SPI_MASTER
config SND_SOC_WM1250_EV1
tristate
depends on I2C
config SND_SOC_WM2000
tristate
depends on I2C
config SND_SOC_WM2200
tristate
depends on I2C
config SND_SOC_WM5100
tristate
depends on I2C
config SND_SOC_WM5102
tristate
depends on MFD_WM5102 && MFD_ARIZONA
config SND_SOC_WM5110
tristate
depends on MFD_WM5110 && MFD_ARIZONA
config SND_SOC_WM8350
tristate
depends on MFD_WM8350
config SND_SOC_WM9705
tristate
depends on SND_SOC_AC97_BUS || AC97_BUS_NEW
select REGMAP_AC97
select AC97_BUS_COMPAT if AC97_BUS_NEW
config SND_SOC_WM9712
tristate
depends on SND_SOC_AC97_BUS || AC97_BUS_NEW
select REGMAP_AC97
select AC97_BUS_COMPAT if AC97_BUS_NEW
config SND_SOC_WM9713
tristate
depends on SND_SOC_AC97_BUS || AC97_BUS_NEW
select REGMAP_AC97
select AC97_BUS_COMPAT if AC97_BUS_NEW
config SND_SOC_WSA881X
tristate "WSA881X Codec"
depends on SOUNDWIRE
select REGMAP_SOUNDWIRE
help This enables support for Qualcomm WSA8810/WSA8815 Class-D
Smart Speaker Amplifier.
config SND_SOC_WSA883X
tristate "WSA883X Codec"
depends on SOUNDWIRE
select REGMAP_SOUNDWIRE
help This enables support for Qualcomm WSA8830/WSA8835 Class-D
Smart Speaker Amplifier.
config SND_SOC_WSA884X
tristate "WSA884X Codec"
depends on SOUNDWIRE
select REGMAP_SOUNDWIRE
help This enables support for Qualcomm WSA8840/WSA8845/WSA8845H Class-D
Smart Speaker Amplifier.
config SND_SOC_ZL38060
tristate "Microsemi ZL38060 Connected Home Audio Processor"
depends on SPI_MASTER
depends on GPIOLIB
select REGMAP
help
Support for ZL38060 Connected Home Audio Processor from Microsemi,
which consists of a Digital Signal Processor (DSP), several Digital
Audio Interfaces (DAIs), analog outputs, and a block of 14 GPIOs.
# Amp
config SND_SOC_LM4857
tristate
depends on I2C
config SND_SOC_MAX9759
tristate "Maxim MAX9759 speaker Amplifier"
depends on GPIOLIB
config SND_SOC_MAX9768
tristate
depends on I2C
config SND_SOC_MAX9877
tristate
depends on I2C
config SND_SOC_MC13783
tristate
depends on MFD_MC13XXX
config SND_SOC_MT6357
tristate "MediaTek MT6357 Codec"
help
Enable support for the platform which uses MT6357 as
external codec device.
config SND_SOC_MT6358
tristate "MediaTek MT6358 Codec"
help
Enable support for the platform which uses MT6358 as
external codec device.
config SND_SOC_MT6359
tristate "MediaTek MT6359 Codec"
depends on MTK_PMIC_WRAP
help
Enable support for the platform which uses MT6359 as
external codec device.
config SND_SOC_MT6359_ACCDET
tristate "MediaTek MT6359 ACCDET driver"
depends on MTK_PMIC_WRAP
help
ACCDET means Accessory Detection technology, MediaTek develop it for ASoC codec soc-jack detection mechanism.
Select N if you don't have jack on board.
config SND_SOC_MT6660
tristate "Mediatek MT6660 Speaker Amplifier"
depends on I2C
help
MediaTek MT6660 is a smart power amplifier which contain
speaker protection, multi-band DRC, equalizer functions.
Select N if you don't have MT6660 on board.
Select M to build this as module.
config SND_SOC_LPASS_WSA_MACRO
depends on COMMON_CLK
select REGMAP_MMIO
select SND_SOC_LPASS_MACRO_COMMON
tristate "Qualcomm WSA Macro in LPASS(Low Power Audio SubSystem)"
config SND_SOC_LPASS_VA_MACRO
depends on COMMON_CLK
select REGMAP_MMIO
select SND_SOC_LPASS_MACRO_COMMON
tristate "Qualcomm VA Macro in LPASS(Low Power Audio SubSystem)"
config SND_SOC_LPASS_RX_MACRO
depends on COMMON_CLK
select REGMAP_MMIO
select SND_SOC_LPASS_MACRO_COMMON
tristate "Qualcomm RX Macro in LPASS(Low Power Audio SubSystem)"
config SND_SOC_LPASS_TX_MACRO
depends on COMMON_CLK
select REGMAP_MMIO
select SND_SOC_LPASS_MACRO_COMMON
tristate "Qualcomm TX Macro in LPASS(Low Power Audio SubSystem)"
endmenu
Messung V0.5 in Prozent
¤ Dauer der Verarbeitung: 0.25 Sekunden
(vorverarbeitet am 2026-04-29)
¤
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.