Quellcode-Bibliothek

^© Kompilation durch diese Firma

[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]

Datei: configure Sprache: Lisp

Original von: Lyx^©

#! /bin/sh
# This script is a hand-made configure script. It contains a lot of
# code stolen from GNU autoconf. I removed all the code that was not
# useful for configuring a LyX installation.

####some configuration variables
lyx_check_config=yes
lyx_keep_temps=no
srcdir=

#### Parse the command line
for ac_option do
  case "$ac_option" in
    -help | --help | -h)
      cat << EOF
Usage: configure [options]
Options:
  --help                   show this help lines
  --keep-temps             keep temporary files (for debug. purposes)
  --without-latex-config   do not run LaTeX to determine configuration
EOF
      exit 0;;
    --without-latex-config)
      lyx_check_config=no ;;
    --keep-temps)
      lyx_keep_temps=yes ;;
  esac
done

#### Checking for some echo oddities
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says [email protected].
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t=' '
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi

#### I do not really know why this is useful, but we might as well keep it.
# NLS nuisances.
# Only set these to C if already set.  These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi

#### Guess the directory in which configure is located.
ac_prog=$0
srcdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
srcdir=`echo "${srcdir}" | sed 's%$[^/]$/*$%\1%'`
test "x$srcdir" = "x$ac_prog" && srcdir=.
if test ! -r ${srcdir}/chkconfig.ltx ; then
  echo "configure: error: cannot find chkconfig.ltx script"
  exit 1
fi

#### Create the build directories if necessary
for dir in bind doc kbd layouts templates reLyX ; do
  test ! -d $dir && mkdir $dir
done

#### Searching some useful programs
# Search LaTeX2e
echo $ac_n "checking for a LaTeX2e program""... $ac_c"
echo "$ac_t"""
LATEX=
for ac_prog in latex latex2e
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$2
if test -n "$ac_word"; then
  echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -x $ac_dir/$ac_word; then
      LATEX="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"

  if test -n "$LATEX"; then
    ac_result=yes
  else
    ac_result=no
  fi

## Check whether this is really LaTeX2e
rm -f chklatex.ltx
cat >chklatex.ltx <<EOF
\\nonstopmode\\makeatletter
\\ifx\\undefined\\documentclass\\else
  \\message{ThisIsLaTeX2e}
\\fi
\\@@end
EOF
if eval ${LATEX} chklatex.ltx </dev/null 2>/dev/null \
                       | grep 'ThisIsLaTeX2e' >/dev/null; then
  :
else
  LATEX=
  ac_result="not useable"
fi
rm -f chklatex.ltx chklatex.log
  echo "$ac_t""$ac_result"
  test -n "$LATEX" && break
fi
done

if test -z "$LATEX" ; then
  LATEX=none
    lyx_check_config=no
fi

# Search for an installed reLyX or a ready-to-install one
save_PATH=${PATH}
PATH=${PATH}:./reLyX/
echo $ac_n "checking for reLyX LaTeX-to-LyX translator""... $ac_c"
echo "$ac_t"""
RELYX=
for ac_prog in reLyX
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$2
if test -n "$ac_word"; then
  echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -x $ac_dir/$ac_word; then
      RELYX="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"

  if test -n "$RELYX"; then
    ac_result=yes
  else
    ac_result=no
  fi

  echo "$ac_t""$ac_result"
  test -n "$RELYX" && break
fi
done

if test -z "$RELYX" ; then
  RELYX=none
fi

PATH=${save_PATH}

# Search for a Postscript interpreter
echo $ac_n "checking for a Postscript interpreter""... $ac_c"
echo "$ac_t"""
GS=
for ac_prog in gs
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$2
if test -n "$ac_word"; then
  echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -x $ac_dir/$ac_word; then
      GS="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"

  if test -n "$GS"; then
    ac_result=yes
  else
    ac_result=no
  fi

  echo "$ac_t""$ac_result"
  test -n "$GS" && break
fi
done

if test -z "$GS" ; then
  GS=none
fi

# Search something to preview postscript
echo $ac_n "checking for a Postscript previewer""... $ac_c"
echo "$ac_t"""
GHOSTVIEW=
for ac_prog in gv ghostview
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$2
if test -n "$ac_word"; then
  echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -x $ac_dir/$ac_word; then
      GHOSTVIEW="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"

  if test -n "$GHOSTVIEW"; then
    ac_result=yes
  else
    ac_result=no
  fi

  echo "$ac_t""$ac_result"
  test -n "$GHOSTVIEW" && break
fi
done

if test -z "$GHOSTVIEW" ; then
  GHOSTVIEW=none
fi

# Search a *roff program (used to translate tables in ASCII export)
echo $ac_n "checking for a *roff formatter""... $ac_c"
echo "$ac_t"""
ROFF=
for ac_prog in groff nroff
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$2
if test -n "$ac_word"; then
  echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -x $ac_dir/$ac_word; then
      ROFF="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"

  if test -n "$ROFF"; then
    ac_result=yes
  else
    ac_result=no
  fi

  echo "$ac_t""$ac_result"
  test -n "$ROFF" && break
fi
done

if test -z "$ROFF" ; then
  ROFF=none
fi

ascii_roff_command=$ROFF
test $ROFF = "groff" && ascii_roff_command="groff -t -Tlatin1 \$\$FName"
test $ROFF = "nroff" && ascii_roff_command="tbl \$\$FName | nroff"

# Search the ChkTeX program
echo $ac_n "checking for ChkTeX""... $ac_c"
echo "$ac_t"""
CHKTEX=
for ac_prog in chktex
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$2
if test -n "$ac_word"; then
  echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -x $ac_dir/$ac_word; then
      CHKTEX="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"

  if test -n "$CHKTEX"; then
    ac_result=yes
  else
    ac_result=no
  fi

  echo "$ac_t""$ac_result"
  test -n "$CHKTEX" && break
fi
done

if test -z "$CHKTEX" ; then
  CHKTEX=none
fi

chktex_command=$CHKTEX
test $CHKTEX = "chktex" && chktex_command="$CHKTEX -n1 -n3 -n6 -n9 -n22 -n25 -n30 -n38"

# Search for a spellchecker
echo $ac_n "checking for a spell-checker""... $ac_c"
echo "$ac_t"""
SPELL=
for ac_prog in ispell
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$2
if test -n "$ac_word"; then
  echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -x $ac_dir/$ac_word; then
      SPELL="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"

  if test -n "$SPELL"; then
    ac_result=yes
  else
    ac_result=no
  fi

  echo "$ac_t""$ac_result"
  test -n "$SPELL" && break
fi
done

if test -z "$SPELL" ; then
  SPELL=none
fi

# Search a Fax handling program
echo $ac_n "checking for a fax driver""... $ac_c"
echo "$ac_t"""
FAX=
for ac_prog in sendfax faxsend fax
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$2
if test -n "$ac_word"; then
  echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -x $ac_dir/$ac_word; then
      FAX="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"

  if test -n "$FAX"; then
    ac_result=yes
  else
    ac_result=no
  fi

  echo "$ac_t""$ac_result"
  test -n "$FAX" && break
fi
done

if test -z "$FAX" ; then
  FAX=none
fi

if test $FAX = sendfax ; then
  fax_command="sendfax -n -h '\$\$Host' -c '\$\$Comment' -x '\$\$Enterprise' -d '\$\$Name'@'\$\$Phone' '\$\$FName'"
elif test $FAX = faxsend ; then
  fax_command="faxsend '\$\$Phone' '\$\$FName'"
elif test $FAX = fax ; then
  fax_command="fax send '\$\$Phone' '\$\$FName'"
else
  fax_command="none"
fi

# Search for LinuxDoc/SGML-tools
echo $ac_n "checking for SGML-tools (aka LinuxDoc-SGML)""... $ac_c"
echo "$ac_t"""
SGMLTOOLS=
for ac_prog in sgml2lyx
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$2
if test -n "$ac_word"; then
  echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -x $ac_dir/$ac_word; then
      SGMLTOOLS="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"

  if test -n "$SGMLTOOLS"; then
    ac_result=yes
  else
    ac_result=no
  fi

  echo "$ac_t""$ac_result"
  test -n "$SGMLTOOLS" && break
fi
done

if test -z "$SGMLTOOLS" ; then
  SGMLTOOLS=none
fi

chk_sgmltools=no
if test $SGMLTOOLS != none; then
  chk_sgmltools=yes
  sgmltools_cmd="\\def\\hassgmltools{yes}"
fi

# Search for a spool command
echo $ac_n "checking for a spool command""... $ac_c"
echo "$ac_t"""
LPR=
for ac_prog in lp lpr
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog ; ac_word=$2
if test -n "$ac_word"; then
  echo $ac_n "+checking for \"$ac_word\"""... $ac_c"
  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -x $ac_dir/$ac_word; then
      LPR="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"

  if test -n "$LPR"; then
    ac_result=yes
  else
    ac_result=no
  fi

  echo "$ac_t""$ac_result"
  test -n "$LPR" && break
fi
done

if test -z "$LPR" ; then
  LPR=none
fi

case $LPR in
  lp) print_spool_command=lp
      print_spool_printerprefix="-d ";;
lpr) print_spool_command=lpr
      print_spool_printerprefix="-P";;
   *) :;; # leave to empty values
esac

#### Explore the LaTeX configuration
echo $ac_n "checking LaTeX configuration""... $ac_c"
# First, remove the files that we want to re-create
rm -f textclass.lst packages.lst chkconfig.sed
if test ${lyx_check_config} = no ; then
  echo "$ac_t""default values"
else
  echo "$ac_t""auto"
  rm -f wrap_chkconfig.ltx chkconfig.vars chkconfig.classes chklayouts.tex
  cat >wrap_chkconfig.ltx <<EOF
\\newcommand\\srcdir{${srcdir}}
${sgmltools_cmd}
\\input{${srcdir}/chkconfig.ltx}
EOF
  ## Construct the list of classes to test for.
  # build the list of available layout files and convert it to commands
  # for chkconfig.ltx
  for file in ./layouts/*.layout ${srcdir}/layouts/*.layout ; do
    case $file in
      */\*.layout) ;;
      *) echo $file ;;
    esac
  done | sed -e 's%^.*layouts/$.*$\.layout$%\\TestDocClass{\1}%'\
             > chklayouts.tex
  eval ${LATEX} wrap_chkconfig.ltx 2>/dev/null | grep '^\+'
  eval `cat chkconfig.vars | sed 's/-/_/g'`
fi

# Do we have all the files we need? Useful if latex did not run
echo creating textclass.lst
# if textclass.lst does not exist (because LaTeX did not run),
# then provide a standard version.
if test ! -f textclass.lst ; then
  cat >textclass.lst <<EOF
# This file declares layouts and their associated definition files
# (include dir. relative to the place where this file is).
# It contains only default values, since chkconfig.ltx could not be run
# for some reason. Run ./configure if you need to update it after a
# configuration change.
article article article
report report report
book book book
linuxdoc linuxdoc linuxdoc
letter letter letter
EOF
fi

# if chkconfig.sed does not exist (because LaTeX did not run),
# then provide a standard version.
if test ! -f chkconfig.sed ; then
  cat >chkconfig.sed <<EOF
s/@.*@/???/g
EOF
fi

echo creating packages.lst
# if packages.lst does not exist (because LaTeX did not run),
# then provide a standard version.
if test ! -f packages.lst ; then
  cat >packages.lst <<EOF
# This file should contain the list of LaTeX packages that have been
# recognized by LyX. Unfortunately, since configure could not find
# your LaTeX2e program, the tests have not been run. Run ./configure
# if you need to update it after a configuration change.

EOF
fi

echo creating doc/LaTeXConfig.lyx
echo "s/@chk_sgmltools@/$chk_sgmltools/g" >> chkconfig.sed
sed -f chkconfig.sed ${srcdir}/doc/LaTeXConfig.lyx.in >doc/LaTeXConfig.lyx

echo creating lyxrc.defaults
rm -f lyxrc.defaults
cat >lyxrc.defaults <<EOF
# This file has been automatically generated by LyX' lib/configure
# script. It contains default settings that have been determined by
# examining your system. PLEASE DO NOT MODIFY ANYTHING HERE! If you
# want to customize LyX, make a copy of the file LYXDIR/lyxrc as
# ~/.lyx/lyxrc and edit this file instead. Any setting in lyxrc will
# override the values given here.
\\latex_command "$LATEX"
\\relyx_command "$RELYX"
\\ps_command "$GS"
\\view_ps_command "$GHOSTVIEW -swap"
\\view_pspic_command "$GHOSTVIEW"
\\ascii_roff_command "$ascii_roff_command"
\\chktex_command "$chktex_command"
\\spell_command "$SPELL"
\\fax_command "$fax_command"
\\print_spool_command "$print_spool_command"
\\print_spool_printerprefix "$print_spool_printerprefix"
\\font_encoding "$chk_fontenc"
EOF

# Remove superfluous files if we are not writing in the main lib
# directory
for file in lyxrc.defaults textclass.lst packages.lst \
            doc/LaTeXConfig.lyx ; do
  # we rename the file first, so that we avoid comparing a file with itself
  mv $file $file.new
  if test -r $srcdir/$file && diff $file.new $srcdir/$file >/dev/null 2>/dev/null ;
  then
    echo "removing $file, which is identical to the system global version"
    rm -f $file.new
  else
    mv $file.new $file
  fi
done

# Final clean-up
if test $lyx_keep_temps = no ; then
rm -f chkconfig.sed chkconfig.vars wrap_chkconfig.* chklayouts.tex \
      missfont.log
fi

¤ Dauer der Verarbeitung: 0.31 Sekunden (vorverarbeitet) ¤

Download des Quellennavigators
Download des sprechenden Kalenders
in der Quellcodebibliothek suchen

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.