Quelle  yts751.cob   Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  YTS751.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.


      * EMBEDDED COBOL (file "YTS751.PCO")


      *Copyright 1996 National Computing Centre Limited, 
      *and Computer Logic R&D S.A 
      *on behalf of the CTS5 SQL2 Project. 
      *All rights reserved.                                          
      *The CTS5 SQL2 Project is sponsored by the European Community. 
      *                                                             
      *The National Computing Centre Limited and Computer Logic R&D  
      *have given permission to NIST to distribute this program      
      *over the World Wide Web in order to promote SQL standards.    
      *DISCLAIMER:                                                   
      *This program was reviewed by employees of NIST for            
      *conformance to the SQL standards.                             
      *NIST assumes no responsibility for any party's use of         
      *this program.                                                 


      ****************************************************************
      *                                                              
      *                 COMMENT SECTION                              
      *                                                              
      * SQL VALIDATION TEST SUITE V6.0                               
      *                                                              
      * YTS751.PCO                                                   
      * WRITTEN BY:  Susan Watters                                   
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
      *                                                              
      * CREATE DOMAIN as SQL procedure statement with default        
      *                                                              
      *                                                              
      * REFERENCES                                                   
      *   11.21   SR.1                                               
      *   11.21   GR.3                                               
      *   11.5    <default clause>                                   
      *   21.2.5  DOMAINS view                                       
      *   F#25    Domain definition                                  
      *   F#3     Basic schema manipulation                          
      *   F#2     Basic information schema                           
      *                                                              
      * DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test               
      *                                                              
      * QA Status: Full FC                                           
      *                                                              
      * Revised by DWF 1996-02-29                                    
      *   Removed EXEC SQL from inside printfs                       
      *   Initialized vars that are checked and printed              
      *   Stopped initializing vars that aren't                      
      *   Renamed indicators                                         
      *   Tightened pass criteria                                    
      *   Improved feedback                                          
      *   Added rollback after authid                                
      ****************************************************************




           EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  co PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  domcat PIC  X(128).
       01  dtype PIC  X(29).
       01  cnum PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  olen PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  colcat PIC  X(128).
       01  colnam PIC  X(128).
       01  colsch PIC  X(128).
       01  chrset PIC  X(128).
       01  chrsch PIC  X(128).
       01  chrnme PIC  X(128).
       01  numpre PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  numrad PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  numscl PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  domdef PIC  X(10).
       01  dttime PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic3 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic4 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic5 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic6 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic7 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic8 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic9 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indica PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indicb PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indicc PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
             EXEC SQL END DECLARE SECTION END-EXEC
       01  i PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration 
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "CTS1 " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
             EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY "SQL Test Suite, V6.0, Embedded COBOL, yts751.pco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST7501 *******************
             MOVE 1 TO flag

             DISPLAY " TEST7501 "
             DISPLAY " CREATE DOMAIN as SQL proc statement with
      -    " default"
             DISPLAY "References:"
             DISPLAY " 11.21 SR.1"
             DISPLAY " 11.21 GR.3"
             DISPLAY " 11.5 "
             DISPLAY " 21.2.5 DOMAINS view"
             DISPLAY " F#25 Domain definition"
             DISPLAY " F#3 Basic schema manipulation"
             DISPLAY " F#2 Basic information schema"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

      *initialise all host variables 

             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO dtype
             MOVE 99 TO cnum
             MOVE 99 TO olen
             MOVE "jjjjjjjjjj" TO domdef
             MOVE 99 TO indic1
             MOVE 99 TO indic2
             MOVE 99 TO indic3
             MOVE 99 TO indic4
             MOVE 99 TO indic5
             MOVE 99 TO indic6
             MOVE 99 TO indic7
             MOVE 99 TO indic8
             MOVE 99 TO indic9
             MOVE 99 TO indica
             MOVE 99 TO indicb
             MOVE 99 TO indicc

      *create domain chardomain 

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             DISPLAY "CREATE DOMAIN chardomain"
             DISPLAY "AS CHAR(10) DEFAULT 'MANCHESTER';"
             EXEC SQL CREATE DOMAIN chardomain
               AS CHAR(10) DEFAULT 'MANCHESTER' END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *Ensure chardomain is referenced in DOMAINS view 

             MOVE 0 TO co
             DISPLAY "SELECT COUNT(*) INTO :co FROM
      -    " INFORMATION_SCHEMA.DOMAINS"
             DISPLAY "WHERE DOMAIN_NAME = 'CHARDOMAIN'"
             DISPLAY "AND DOMAIN_SCHEMA = 'CTS1'"
             EXEC SQL SELECT COUNT(*) INTO :co
               FROM INFORMATION_SCHEMA.DOMAINS
               WHERE DOMAIN_NAME = 'CHARDOMAIN'
               AND DOMAIN_SCHEMA = 'CTS1' END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "Count should equal 1, count is ", co
             if (co  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY  " "

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             DISPLAY "SELECT DOMAIN_CATALOG,"
             DISPLAY " DATA_TYPE, CHARACTER_MAXIMUM_LENGTH,"
             DISPLAY " CHARACTER_OCTET_LENGTH,
      -    " COLLATION_CATALOG,"
             DISPLAY " COLLATION_SCHEMA, COLLATION_NAME,"
             DISPLAY " CHARACTER_SET_CATALOG,
      -    " CHARACTER_SET_SCHEMA,"
             DISPLAY " CHARACTER_SET_NAME, NUMERIC_PRECISION,"
             DISPLAY " NUMERIC_PRECISION_RADIX, NUMERIC_SCALE,"
             DISPLAY " DATETIME_PRECISION, DOMAIN_DEFAULT"
             DISPLAY " INTO :domcat:indic1,"
             DISPLAY " :dtype, :cnum, :olen:indic2,"
             DISPLAY " :colcat:indic3, :colsch:indic4,
      -    " :colnam:indic5,"
             DISPLAY " :chrset:indic6, :chrsch:indic7,
      -    " :chrnme:indic8,"
             DISPLAY " :numpre:indic9, :numrad:indica,"
             DISPLAY " :numscl:indicb, :dttime:indicc,"
             DISPLAY " :domdef"
             DISPLAY " FROM INFORMATION_SCHEMA.DOMAINS"
             DISPLAY " WHERE DOMAIN_NAME = 'CHARDOMAIN'"
             DISPLAY " AND DOMAIN_SCHEMA = 'CTS1';"
             EXEC SQL SELECT DOMAIN_CATALOG,
               DATA_TYPE, CHARACTER_MAXIMUM_LENGTH,
               CHARACTER_OCTET_LENGTH, COLLATION_CATALOG,
               COLLATION_SCHEMA, COLLATION_NAME,
               CHARACTER_SET_CATALOG, CHARACTER_SET_SCHEMA,
               CHARACTER_SET_NAME, NUMERIC_PRECISION,
               NUMERIC_PRECISION_RADIX, NUMERIC_SCALE,
               DATETIME_PRECISION, DOMAIN_DEFAULT
               INTO :domcat:indic1,
               :dtype, :cnum, :olen:indic2,
               :colcat:indic3, :colsch:indic4, :colnam:indic5,
               :chrset:indic6, :chrsch:indic7, :chrnme:indic8,
               :numpre:indic9, :numrad:indica,
               :numscl:indicb, :dttime:indicc,
               :domdef
               FROM INFORMATION_SCHEMA.DOMAINS
               WHERE DOMAIN_NAME = 'CHARDOMAIN'
               AND DOMAIN_SCHEMA = 'CTS1' END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK

             DISPLAY "indic1 should be 0; its value is ", indic1
             if (indic1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "dtype should be CHARACTER; its value is ", dtype
             if (dtype  NOT  =   "CHARACTER " ) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "cnum should be 10; its value is ", cnum
             if (cnum  NOT =  10) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "domdef should be MANCHESTER; its value is ",
             domdef
             if (domdef  NOT  =   "MANCHESTER") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "indic2 should be 0; its value is ", indic2
             if (indic2  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "indic3 should be 0; its value is ", indic3
             if (indic3  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "indic4 should be 0; its value is ", indic4
             if (indic4  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "indic5 should be 0; its value is ", indic5
             if (indic5  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "indic6 should be 0; its value is ", indic6
             if (indic6  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "indic7 should be 0; its value is ", indic7
             if (indic7  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "indic8 should be 0; its value is ", indic8
             if (indic8  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "indic9 should be -1; its value is ", indic9
             if (indic9  NOT =  -1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "indica should be -1; its value is ", indica
             if (indica  NOT =  -1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "indicb should be -1; its value is ", indicb
             if (indicb  NOT =  -1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "indicc should be -1; its value is ", indicc
             if (indicc  NOT =  -1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DROP DOMAIN chardomain CASCADE;"
             EXEC SQL DROP DOMAIN chardomain CASCADE END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " yts751.pco *** pass *** "
               EXEC SQL INSERT INTO CTS1.TESTREPORT
                 VALUES('7501','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " yts751.pco *** fail *** "
               EXEC SQL INSERT INTO CTS1.TESTREPORT
                 VALUES('7501','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST7501 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion. 
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined       
      *subclasses with 000.  This replacement equates valid     
      *implementation-defined subclasses with the 000 value     
      *expected by the test case; otherwise the test will fail. 
      *After calling NOSUBCLASS, NORMSQ will be tested          
      *                          SQLSTATE will be printed.      

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ 
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table 
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
           
      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def. 
      *Changed NORMSQ means implementation-defined subclass,    
      *so proceed to zero it out, if valid (0-9,A-Z)            
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ 
      *valid characters are 0-9, A-Z 
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
          
           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z 
      *examining position 5 of char array NORMSQ 
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
   
      *implementation-defined subclasses are allowed for warnings 
      *(class = 01).  These equate to successful completion 
      *SQLSTATE values of 00000. 
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2 

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.