| products/Sources/formale Sprachen/Cobol/Test-Suite/SQL M/ |
|
Quellcode-Bibliothek
© Kompilation durch diese Firma
[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]
Datei: dml177.cob Sprache: Unknown
|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML177. ENVIRONMENT DIVISION. CONFIGURATION SECTION. SOURCE-COMPUTER. xyz. OBJECT-COMPUTER. xyz. DATA DIVISION. WORKING-STORAGE SECTION. * Standard COBOL (file "DML177.SCO") calling SQL * procedures in file "DML177.MCO". **************************************************************** * * COMMENT SECTION * * DATE 1996-05-14 Module COBOL LANGUAGE * SQL VALIDATION TEST SUITE V6.0 * DISCLAIMER: * This program was written by employees of NIST to test SQL * implementations for conformance to the SQL standards. * NIST assumes no responsibility for any party's use of * this program. * * DML177.SCO * WRITTEN BY: David Flater * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE * * This routine tests Intermediate SQL. * * REFERENCES * FIPS PUB 127-2 14.2 Intermediate SQL * ANSI SQL-1992 * **************************************************************** * EXEC SQL BEGIN DECLARE SECTION END-EXEC 01 SQLCODE PIC S9(9) COMP. 01 SQLSTATE PIC X(5). 01 uid PIC X(18). 01 uidx PIC X(18). 01 int1 PIC S9(10) DISPLAY SIGN LEADING SEPARATE. * EXEC SQL END DECLARE SECTION END-EXEC 01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 ALPNUM-TABLE VALUE IS "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ". 05 ALPNUM PIC X OCCURS 36 TIMES. 01 NORMSQ. 05 NORMSQX PIC X OCCURS 5 TIMES. 01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE. *date_time declaration 01 TO-DAY PIC 9(6). 01 THE-TIME PIC 9(8). 01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE. PROCEDURE DIVISION. P0. MOVE "FLATER " TO uid CALL "AUTHID" USING uid MOVE "not logged in, not" TO uidx * EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO; CALL "SUB1" USING SQLCODE SQLSTATE uidx MOVE SQLCODE TO SQL-COD * EXEC SQL ROLLBACK WORK; CALL "SUB2" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD if (uid NOT = uidx) then DISPLAY "ERROR: User ", uid, " expected. User ", uidx, " - " connected" STOP RUN END-IF MOVE 0 TO errcnt DISPLAY "SQL Test Suite, V6.0, Module COBOL, dml177.sco" DISPLAY "59-byte ID" DISPLAY "TEd Version #" *date_time print ACCEPT TO-DAY FROM DATE ACCEPT THE-TIME FROM TIME DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME ******************** BEGIN TEST0889 ******************* MOVE 1 TO flag DISPLAY " FIPS sizing TEST0889" DISPLAY " FIPS sizing, INTEGER binary prec >= 31" DISPLAY "References:" DISPLAY " FIPS 16.6 -- Sizing #11, INTEGER binary - " precision" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE DISPLAY "CREATE TABLE NOMAIL (" DISPLAY " C1 INT);" * EXEC SQL CREATE TABLE NOMAIL ( * C1 INT); CALL "SUB3" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB4" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *2 ^ 31 = 2147483648 DISPLAY "INSERT INTO NOMAIL VALUES (2147483647);" * EXEC SQL INSERT INTO NOMAIL VALUES (2147483647); CALL "SUB5" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO NOMAIL VALUES (-2147483647);" * EXEC SQL INSERT INTO NOMAIL VALUES (-2147483647); CALL "SUB6" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " MOVE 0 TO int1 DISPLAY "SELECT C1 INTO :int1" DISPLAY " FROM NOMAIL WHERE C1 > 0;" * EXEC SQL SELECT C1 INTO :int1 * FROM NOMAIL WHERE C1 > 0; CALL "SUB7" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 2147483647; its value is ", int1 if (int1 NOT = 2147483647) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT C1 INTO :int1" DISPLAY " FROM NOMAIL WHERE C1 < 0;" * EXEC SQL SELECT C1 INTO :int1 * FROM NOMAIL WHERE C1 < 0; CALL "SUB8" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be -2147483647; its value is ", int1 if (int1 NOT = -2147483647) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT C1 - 2147483646 INTO :int1" DISPLAY " FROM NOMAIL" DISPLAY " WHERE C1 > 0;" * EXEC SQL SELECT C1 - 2147483646 INTO :int1 * FROM NOMAIL * WHERE C1 > 0; CALL "SUB9" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT C1 + 2147483646 INTO :int1" DISPLAY " FROM NOMAIL" DISPLAY " WHERE C1 < 0;" * EXEC SQL SELECT C1 + 2147483646 INTO :int1 * FROM NOMAIL * WHERE C1 < 0; CALL "SUB10" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be -1; its value is ", int1 if (int1 NOT = -1) then MOVE 0 TO flag END-IF DISPLAY "UPDATE NOMAIL" DISPLAY " SET C1 = C1 + 2147483646" DISPLAY " WHERE C1 < 0;" * EXEC SQL UPDATE NOMAIL * SET C1 = C1 + 2147483646 * WHERE C1 < 0; CALL "SUB11" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "SELECT C1 INTO :int1" DISPLAY " FROM NOMAIL WHERE C1 < 0;" * EXEC SQL SELECT C1 INTO :int1 * FROM NOMAIL WHERE C1 < 0; CALL "SUB12" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be -1; its value is ", int1 if (int1 NOT = -1) then MOVE 0 TO flag END-IF DISPLAY "UPDATE NOMAIL" DISPLAY " SET C1 = C1 - 1;" * EXEC SQL UPDATE NOMAIL * SET C1 = C1 - 1; CALL "SUB13" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " MOVE 99 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM NOMAIL" DISPLAY " WHERE C1 = 2147483645;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM NOMAIL * WHERE C1 = 2147483645; CALL "SUB14" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF MOVE 99 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM NOMAIL" DISPLAY " WHERE C1 = 2147483646;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM NOMAIL * WHERE C1 = 2147483646; CALL "SUB15" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 99 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM NOMAIL" DISPLAY " WHERE C1 = 2147483647;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM NOMAIL * WHERE C1 = 2147483647; CALL "SUB16" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB17" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP TABLE NOMAIL CASCADE;" * EXEC SQL DROP TABLE NOMAIL CASCADE; CALL "SUB18" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB19" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0889','pass','MCO'); CALL "SUB20" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD else DISPLAY " dml177.mco *** fail *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0889','fail','MCO'); CALL "SUB21" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB22" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD ******************** END TEST0889 ******************** ******************** BEGIN TEST0890 ******************* MOVE 1 TO flag DISPLAY " FIPS sizing TEST0890" DISPLAY " FIPS sizing, SMALLINT binary prec >= 15" DISPLAY "References:" DISPLAY " FIPS 16.6 -- Sizing #13, SMALLINT binary - " precision" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE DISPLAY "CREATE TABLE YESMAIL (" DISPLAY " C1 SMALLINT);" * EXEC SQL CREATE TABLE YESMAIL ( * C1 SMALLINT); CALL "SUB23" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB24" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *2 ^ 15 = 32768 DISPLAY "INSERT INTO YESMAIL VALUES (32767);" * EXEC SQL INSERT INTO YESMAIL VALUES (32767); CALL "SUB25" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO YESMAIL VALUES (-32767);" * EXEC SQL INSERT INTO YESMAIL VALUES (-32767); CALL "SUB26" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " MOVE 0 TO int1 DISPLAY "SELECT C1 INTO :int1" DISPLAY " FROM YESMAIL WHERE C1 > 0;" * EXEC SQL SELECT C1 INTO :int1 * FROM YESMAIL WHERE C1 > 0; CALL "SUB27" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 32767; its value is ", int1 if (int1 NOT = 32767) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT C1 INTO :int1" DISPLAY " FROM YESMAIL WHERE C1 < 0;" * EXEC SQL SELECT C1 INTO :int1 * FROM YESMAIL WHERE C1 < 0; CALL "SUB28" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be -32767; its value is ", int1 if (int1 NOT = -32767) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT C1 - 32766 INTO :int1" DISPLAY " FROM YESMAIL" DISPLAY " WHERE C1 > 0;" * EXEC SQL SELECT C1 - 32766 INTO :int1 * FROM YESMAIL * WHERE C1 > 0; CALL "SUB29" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT C1 + 32766 INTO :int1" DISPLAY " FROM YESMAIL" DISPLAY " WHERE C1 < 0;" * EXEC SQL SELECT C1 + 32766 INTO :int1 * FROM YESMAIL * WHERE C1 < 0; CALL "SUB30" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be -1; its value is ", int1 if (int1 NOT = -1) then MOVE 0 TO flag END-IF DISPLAY "UPDATE YESMAIL" DISPLAY " SET C1 = C1 + 32766" DISPLAY " WHERE C1 < 0;" * EXEC SQL UPDATE YESMAIL * SET C1 = C1 + 32766 * WHERE C1 < 0; CALL "SUB31" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "SELECT C1 INTO :int1" DISPLAY " FROM YESMAIL WHERE C1 < 0;" * EXEC SQL SELECT C1 INTO :int1 * FROM YESMAIL WHERE C1 < 0; CALL "SUB32" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be -1; its value is ", int1 if (int1 NOT = -1) then MOVE 0 TO flag END-IF DISPLAY "UPDATE YESMAIL" DISPLAY " SET C1 = C1 - 1;" * EXEC SQL UPDATE YESMAIL * SET C1 = C1 - 1; CALL "SUB33" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " MOVE 99 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM YESMAIL" DISPLAY " WHERE C1 = 32765;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM YESMAIL * WHERE C1 = 32765; CALL "SUB34" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF MOVE 99 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM YESMAIL" DISPLAY " WHERE C1 = 32766;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM YESMAIL * WHERE C1 = 32766; CALL "SUB35" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 99 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM YESMAIL" DISPLAY " WHERE C1 = 32767;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM YESMAIL * WHERE C1 = 32767; CALL "SUB36" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB37" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP TABLE YESMAIL CASCADE;" * EXEC SQL DROP TABLE YESMAIL CASCADE; CALL "SUB38" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB39" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0890','pass','MCO'); CALL "SUB40" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD else DISPLAY " dml177.mco *** fail *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0890','fail','MCO'); CALL "SUB41" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB42" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD ******************** END TEST0890 ******************** **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0 STOP RUN. * **** Procedures for PERFORM statements *Test SQLCODE and SQLSTATE for normal completion. CHCKOK. DISPLAY "SQLCODE should be 0; its value is ", SQL-COD DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then MOVE 0 TO flag END-IF if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF . NOSUBCLASS. *This routine replaces valid implementation-defined *subclasses with 000. This replacement equates valid *implementation-defined subclasses with the 000 value *expected by the test case; otherwise the test will fail. *After calling NOSUBCLASS, NORMSQ will be tested * SQLSTATE will be printed. MOVE SQLSTATE TO NORMSQ MOVE 3 TO norm1 *subclass begins in position 3 of char array NORMSQ *valid subclass begins with 5-9, I-Z, end of ALPNUM table PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *Quit if NORMSQ is unchanged. Subclass is not impl.-def. *Changed NORMSQ means implementation-defined subclass, *so proceed to zero it out, if valid (0-9,A-Z) if (NORMSQ = SQLSTATE) then GO TO EXIT-NOSUBCLASS END-IF MOVE 4 TO norm1 *examining position 4 of char array NORMSQ *valid characters are 0-9, A-Z PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM MOVE 5 TO norm1 *valid characters are 0-9, A-Z *examining position 5 of char array NORMSQ PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *implementation-defined subclasses are allowed for warnings *(class = 01). These equate to successful completion *SQLSTATE values of 00000. *Reference SQL-92 4.28 SQL-transactions, paragraph 2 if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then MOVE "0" TO NORMSQX(2) END-IF . EXIT-NOSUBCLASS. EXIT. [ Dauer der Verarbeitung: 0.7 Sekunden (vorverarbeitet) ] |