| products/Sources/formale Sprachen/Cobol/Test-Suite/SQL M/ |
|
Quellcode-Bibliothek
© Kompilation durch diese Firma
[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]
Datei: cdr029.cob Sprache: Unknown
|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML164. ENVIRONMENT DIVISION. CONFIGURATION SECTION. SOURCE-COMPUTER. xyz. OBJECT-COMPUTER. xyz. DATA DIVISION. WORKING-STORAGE SECTION. * Standard COBOL (file "DML164.SCO") calling SQL * procedures in file "DML164.MCO". **************************************************************** * * COMMENT SECTION * * DATE 1996-04-17 Module COBOL LANGUAGE * SQL VALIDATION TEST SUITE V6.0 * DISCLAIMER: * This program was written by employees of NIST to test SQL * implementations for conformance to the SQL standards. * NIST assumes no responsibility for any party's use of * this program. * * DML164.SCO * WRITTEN BY: David Flater * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE * * This routine tests Intermediate SQL. * * REFERENCES * FIPS PUB 127-2 14.2 Intermediate SQL * ANSI SQL-1992 * **************************************************************** * EXEC SQL BEGIN DECLARE SECTION END-EXEC 01 SQLCODE PIC S9(9) COMP. 01 SQLSTATE PIC X(5). 01 uid PIC X(18). 01 uidx PIC X(18). 01 kywd3 PIC X(3). 01 kywd6 PIC X(6). 01 kywd9 PIC X(9). 01 kywrd PIC X(20). 01 wrd7 PIC X(7). 01 wrd2 PIC X(20). 01 cnt1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 longst PIC X(219). * EXEC SQL END DECLARE SECTION END-EXEC 01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 ALPNUM-TABLE VALUE IS "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ". 05 ALPNUM PIC X OCCURS 36 TIMES. 01 NORMSQ. 05 NORMSQX PIC X OCCURS 5 TIMES. 01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE. *date_time declaration 01 TO-DAY PIC 9(6). 01 THE-TIME PIC 9(8). 01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE. PROCEDURE DIVISION. P0. MOVE "FLATER " TO uid CALL "AUTHID" USING uid MOVE "not logged in, not" TO uidx * EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO; CALL "SUB1" USING SQLCODE SQLSTATE uidx MOVE SQLCODE TO SQL-COD * EXEC SQL ROLLBACK WORK; CALL "SUB2" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD if (uid NOT = uidx) then DISPLAY "ERROR: User ", uid, " expected. User ", uidx, " - " connected" STOP RUN END-IF MOVE 0 TO errcnt DISPLAY "SQL Test Suite, V6.0, Module COBOL, dml164.sco" DISPLAY "59-byte ID" DISPLAY "TEd Version #" *date_time print ACCEPT TO-DAY FROM DATE ACCEPT THE-TIME FROM TIME DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME ******************** BEGIN TEST0867 ******************* MOVE 1 TO flag DISPLAY " TEST0867" DISPLAY " LIKE enhancements: keyword search" DISPLAY "References:" DISPLAY " F#28 -- LIKE enhancements" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE *Carmelo: in translations, replace varchars with strings of the *correct length. *These queries are similar to what might be generated by a progr *to do keyword searches. *Find how many records for Florida Keys MOVE "Key" TO kywd3 DISPLAY "kywd3 = 'Key'" MOVE 0 TO cnt1 DISPLAY "SELECT COUNT(*) INTO :cnt1" DISPLAY " FROM TIDES.LOCATIONS" DISPLAY " WHERE LOC_NAME LIKE '% ' || :kywd3 || '%'" DISPLAY " OR LOC_NAME LIKE '%' || :kywd3 || ' %'" DISPLAY " OR LOC_NAME = :kywd3;" * EXEC SQL SELECT COUNT(*) INTO :cnt1 * FROM TIDES.LOCATIONS * WHERE LOC_NAME LIKE '% ' || :kywd3 || '%' * OR LOC_NAME LIKE '%' || :kywd3 || ' %' * OR LOC_NAME = :kywd3; CALL "SUB3" USING SQLCODE SQLSTATE cnt1 kywd3 kywd3 kywd3 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "cnt1 should be 13; its value is ", cnt1 if (cnt1 NOT = 13) then MOVE 0 TO flag END-IF MOVE "Anchorage" TO kywd9 DISPLAY "kywd9 = 'Anchorage'" MOVE 0 TO cnt1 DISPLAY "SELECT LOC_ID INTO :cnt1" DISPLAY " FROM TIDES.LOCATIONS" DISPLAY " WHERE LOC_NAME LIKE '% ' || :kywd9 || '%'" DISPLAY " OR LOC_NAME LIKE '%' || :kywd9 || ' %'" DISPLAY " OR LOC_NAME = :kywd9;" * EXEC SQL SELECT LOC_ID INTO :cnt1 * FROM TIDES.LOCATIONS * WHERE LOC_NAME LIKE '% ' || :kywd9 || '%' * OR LOC_NAME LIKE '%' || :kywd9 || ' %' * OR LOC_NAME = :kywd9; CALL "SUB4" USING SQLCODE SQLSTATE cnt1 kywd9 kywd9 kywd9 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "cnt1 should be 10; its value is ", cnt1 if (cnt1 NOT = 10) then MOVE 0 TO flag END-IF MOVE "London" TO kywd6 DISPLAY "kywd6 = 'London'" MOVE "England" TO wrd7 DISPLAY "wrd7 = 'England'" * EXEC SQL SELECT * 'SELECT LOC_ID FROM TIDES.LOCATIONS' * ' WHERE (LOC_NAME LIKE ''% '' || ? || ''%''' * ' OR LOC_NAME LIKE ''%'' || ? || '' %''' * ' OR LOC_NAME = ?)' * ' AND (LOC_NAME LIKE ''% '' || ? || ''%''' * ' OR LOC_NAME LIKE ''%'' || ? || '' %''' * ' OR LOC_NAME = ?)' * INTO :longst * FROM HU.ECCO; CALL "SUB5" USING SQLCODE SQLSTATE longst MOVE SQLCODE TO SQL-COD DISPLAY "longst = ", longst DISPLAY "PREPARE S0867 FROM :longst;" * EXEC SQL PREPARE S0867 FROM :longst; CALL "SUB6" USING SQLCODE SQLSTATE longst MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DECLARE C0867 CURSOR FOR S0867;" * EXEC SQL DECLARE C0867 CURSOR FOR S0867 END-EXEC DISPLAY "ALLOCATE DESCRIPTOR 'D0867';" * EXEC SQL ALLOCATE DESCRIPTOR 'D0867'; CALL "SUB7" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "SET DESCRIPTOR 'D0867' COUNT = 6;" * EXEC SQL SET DESCRIPTOR 'D0867' COUNT = 6; CALL "SUB8" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "cnt1 = 1;" MOVE 1 TO cnt1 DISPLAY "SET DESCRIPTOR 'D0867' VALUE :cnt1" DISPLAY " TYPE = 1," DISPLAY " LENGTH = 6," DISPLAY " DATA = :kywd6;" * EXEC SQL SET DESCRIPTOR 'D0867' VALUE :cnt1 * TYPE = 1, * LENGTH = 6, * DATA = :kywd6; CALL "SUB9" USING SQLCODE SQLSTATE cnt1 kywd6 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "cnt1 = 2;" MOVE 2 TO cnt1 DISPLAY "SET DESCRIPTOR 'D0867' VALUE :cnt1" DISPLAY " TYPE = 1," DISPLAY " LENGTH = 6," DISPLAY " DATA = :kywd6;" * EXEC SQL SET DESCRIPTOR 'D0867' VALUE :cnt1 * TYPE = 1, * LENGTH = 6, * DATA = :kywd6; CALL "SUB10" USING SQLCODE SQLSTATE cnt1 kywd6 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "cnt1 = 3;" MOVE 3 TO cnt1 DISPLAY "SET DESCRIPTOR 'D0867' VALUE :cnt1" DISPLAY " TYPE = 1," DISPLAY " LENGTH = 6," DISPLAY " DATA = :kywd6;" * EXEC SQL SET DESCRIPTOR 'D0867' VALUE :cnt1 * TYPE = 1, * LENGTH = 6, * DATA = :kywd6; CALL "SUB11" USING SQLCODE SQLSTATE cnt1 kywd6 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "cnt1 = 4;" MOVE 4 TO cnt1 DISPLAY "SET DESCRIPTOR 'D0867' VALUE :cnt1" DISPLAY " TYPE = 1," DISPLAY " LENGTH = 7," DISPLAY " DATA = :wrd7;" * EXEC SQL SET DESCRIPTOR 'D0867' VALUE :cnt1 * TYPE = 1, * LENGTH = 7, * DATA = :wrd7; CALL "SUB12" USING SQLCODE SQLSTATE cnt1 wrd7 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "cnt1 = 5;" MOVE 5 TO cnt1 DISPLAY "SET DESCRIPTOR 'D0867' VALUE :cnt1" DISPLAY " TYPE = 1," DISPLAY " LENGTH = 7," DISPLAY " DATA = :wrd7;" * EXEC SQL SET DESCRIPTOR 'D0867' VALUE :cnt1 * TYPE = 1, * LENGTH = 7, * DATA = :wrd7; CALL "SUB13" USING SQLCODE SQLSTATE cnt1 wrd7 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "cnt1 = 6;" MOVE 6 TO cnt1 DISPLAY "SET DESCRIPTOR 'D0867' VALUE :cnt1" DISPLAY " TYPE = 1," DISPLAY " LENGTH = 7," DISPLAY " DATA = :wrd7;" * EXEC SQL SET DESCRIPTOR 'D0867' VALUE :cnt1 * TYPE = 1, * LENGTH = 7, * DATA = :wrd7; CALL "SUB14" USING SQLCODE SQLSTATE cnt1 wrd7 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "OPEN C0867 USING SQL DESCRIPTOR 'D0867';" * EXEC SQL OPEN C0867 USING SQL DESCRIPTOR 'D0867'; CALL "SUB15" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " MOVE 0 TO cnt1 DISPLAY "FETCH C0867 INTO :cnt1;" * EXEC SQL FETCH C0867 INTO :cnt1; CALL "SUB16" USING SQLCODE SQLSTATE cnt1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "cnt1 should be 202; its value is ", cnt1 if (cnt1 NOT = 202) then MOVE 0 TO flag END-IF DISPLAY "FETCH C0867 INTO :cnt1;" * EXEC SQL FETCH C0867 INTO :cnt1; CALL "SUB17" USING SQLCODE SQLSTATE cnt1 MOVE SQLCODE TO SQL-COD DISPLAY "SQLCODE should be 100; its value is ", SQL-COD DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (SQLCODE NOT = 100 OR NORMSQ NOT = "02000") then MOVE 0 TO flag END-IF if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB18" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0867','pass','MCO'); CALL "SUB19" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD else DISPLAY " dml164.mco *** fail *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0867','fail','MCO'); CALL "SUB20" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB21" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD ******************** END TEST0867 ******************** ******************** BEGIN TEST0868 ******************* MOVE 1 TO flag DISPLAY " TEST0868" DISPLAY " More DISPLAY "References:" DISPLAY " F#29 -- UNIQUE predicate" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE *Find how many data sets are redundant MOVE 0 TO cnt1 DISPLAY "SELECT COUNT(*) INTO :cnt1" DISPLAY " FROM TIDES.LOCATIONS A" DISPLAY " WHERE NOT UNIQUE (" DISPLAY " SELECT * FROM TIDES.LOCATIONS" DISPLAY " WHERE DEG_LATITUDE = A.DEG_LATITUDE" DISPLAY " AND DEG_LONGITUDE = A.DEG_LONGITUDE);" * EXEC SQL SELECT COUNT(*) INTO :cnt1 * FROM TIDES.LOCATIONS A * WHERE NOT UNIQUE ( * SELECT * FROM TIDES.LOCATIONS * WHERE DEG_LATITUDE = A.DEG_LATITUDE * AND DEG_LONGITUDE = A.DEG_LONGITUDE); CALL "SUB22" USING SQLCODE SQLSTATE cnt1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "cnt1 should be 12; its value is ", cnt1 if (cnt1 NOT = 12) then MOVE 0 TO flag END-IF *True on zero rows. MOVE 0 TO cnt1 DISPLAY "SELECT COUNT(*) INTO :cnt1" DISPLAY " FROM HU.WORKS A WHERE UNIQUE" DISPLAY " (SELECT EMPNUM FROM HU.STAFF B" DISPLAY " WHERE A.EMPNUM = B.EMPNUM" DISPLAY " AND GRADE = 13" DISPLAY " AND CITY = 'Deale');" * EXEC SQL SELECT COUNT(*) INTO :cnt1 * FROM HU.WORKS A WHERE UNIQUE * (SELECT EMPNUM FROM HU.STAFF B * WHERE A.EMPNUM = B.EMPNUM * AND GRADE = 13 * AND CITY = 'Deale'); CALL "SUB23" USING SQLCODE SQLSTATE cnt1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "cnt1 should be 12; its value is ", cnt1 if (cnt1 NOT = 12) then MOVE 0 TO flag END-IF DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB24" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0868','pass','MCO'); CALL "SUB25" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD else DISPLAY " dml164.mco *** fail *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0868','fail','MCO'); CALL "SUB26" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB27" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD ******************** END TEST0868 ******************** ******************** BEGIN TEST0869 ******************* MOVE 1 TO flag DISPLAY " TEST0869" DISPLAY " More table operations" DISPLAY "References:" DISPLAY " F#30 -- Table operations" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE DISPLAY "CREATE TABLE BILLS_SENT (" DISPLAY " BILLID INT PRIMARY KEY," DISPLAY " BILLAMOUNT DECIMAL(7,2));" * EXEC SQL CREATE TABLE BILLS_SENT ( * BILLID INT PRIMARY KEY, * BILLAMOUNT DECIMAL(7,2)); CALL "SUB28" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB29" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "CREATE TABLE PAYMENTS (" DISPLAY " BILLID INT," DISPLAY " PAYID INT PRIMARY KEY," DISPLAY " PAYAMOUNT DECIMAL(7,2));" * EXEC SQL CREATE TABLE PAYMENTS ( * BILLID INT, * PAYID INT PRIMARY KEY, * PAYAMOUNT DECIMAL(7,2)); CALL "SUB30" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB31" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "CREATE VIEW NO_PAY AS SELECT * FROM BILLS_SENT" DISPLAY " EXCEPT CORRESPONDING SELECT * FROM PAYMENTS;" * EXEC SQL CREATE VIEW NO_PAY AS SELECT * FROM BILLS_SENT * EXCEPT CORRESPONDING SELECT * FROM PAYMENTS; CALL "SUB32" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB33" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO BILLS_SENT VALUES (" DISPLAY " 0, 100.00);" * EXEC SQL INSERT INTO BILLS_SENT VALUES ( * 0, 100.00); CALL "SUB34" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO BILLS_SENT VALUES (" DISPLAY " 1, 80.00);" * EXEC SQL INSERT INTO BILLS_SENT VALUES ( * 1, 80.00); CALL "SUB35" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO BILLS_SENT VALUES (" DISPLAY " 2, 50.00);" * EXEC SQL INSERT INTO BILLS_SENT VALUES ( * 2, 50.00); CALL "SUB36" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO PAYMENTS VALUES (" DISPLAY " 0, 0, 100.00);" * EXEC SQL INSERT INTO PAYMENTS VALUES ( * 0, 0, 100.00); CALL "SUB37" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO PAYMENTS VALUES (" DISPLAY " 1, 1, 40.00);" * EXEC SQL INSERT INTO PAYMENTS VALUES ( * 1, 1, 40.00); CALL "SUB38" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO PAYMENTS VALUES (" DISPLAY " 1, 2, 40.00);" * EXEC SQL INSERT INTO PAYMENTS VALUES ( * 1, 2, 40.00); CALL "SUB39" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB40" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " MOVE 0 TO cnt1 DISPLAY "SELECT BILLID INTO :cnt1" DISPLAY " FROM NO_PAY;" * EXEC SQL SELECT BILLID INTO :cnt1 * FROM NO_PAY; CALL "SUB41" USING SQLCODE SQLSTATE cnt1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "cnt1 should be 2; its value is ", cnt1 if (cnt1 NOT = 2) then MOVE 0 TO flag END-IF DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB42" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "CREATE TABLE CORRECT_OUTPUT (" DISPLAY " PORTVAL INT);" * EXEC SQL CREATE TABLE CORRECT_OUTPUT ( * PORTVAL INT); CALL "SUB43" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB44" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "CREATE VIEW CORRECT_AND_LOSSY (PORTVAL)" DISPLAY " AS SELECT * FROM CORRECT_OUTPUT INTERSECT ALL" DISPLAY " SELECT PORTVAL FROM LOSSY_OUTPUT;" * EXEC SQL CREATE VIEW CORRECT_AND_LOSSY (PORTVAL) * AS SELECT * FROM CORRECT_OUTPUT INTERSECT ALL * SELECT PORTVAL FROM LOSSY_OUTPUT; CALL "SUB45V" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB46" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO LOSSY_OUTPUT VALUES (1);" * EXEC SQL INSERT INTO LOSSY_OUTPUT VALUES (1); CALL "SUB47" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO LOSSY_OUTPUT VALUES (2);" * EXEC SQL INSERT INTO LOSSY_OUTPUT VALUES (2); CALL "SUB48" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO LOSSY_OUTPUT VALUES (1);" * EXEC SQL INSERT INTO LOSSY_OUTPUT VALUES (1); CALL "SUB49" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO LOSSY_OUTPUT VALUES (1);" * EXEC SQL INSERT INTO LOSSY_OUTPUT VALUES (1); CALL "SUB50" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO LOSSY_OUTPUT VALUES (3);" * EXEC SQL INSERT INTO LOSSY_OUTPUT VALUES (3); CALL "SUB51" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO LOSSY_OUTPUT VALUES (1);" * EXEC SQL INSERT INTO LOSSY_OUTPUT VALUES (1); CALL "SUB52" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO LOSSY_OUTPUT VALUES (4);" * EXEC SQL INSERT INTO LOSSY_OUTPUT VALUES (4); CALL "SUB53" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO LOSSY_OUTPUT VALUES (1);" * EXEC SQL INSERT INTO LOSSY_OUTPUT VALUES (1); CALL "SUB54" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO LOSSY_OUTPUT VALUES (3);" * EXEC SQL INSERT INTO LOSSY_OUTPUT VALUES (3); CALL "SUB55" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO LOSSY_OUTPUT VALUES (2);" * EXEC SQL INSERT INTO LOSSY_OUTPUT VALUES (2); CALL "SUB56" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *Changes: two more 1s; a 3 changed to a 4 DISPLAY "INSERT INTO CORRECT_OUTPUT VALUES (1);" * EXEC SQL INSERT INTO CORRECT_OUTPUT VALUES (1); CALL "SUB57" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO CORRECT_OUTPUT VALUES (1);" * EXEC SQL INSERT INTO CORRECT_OUTPUT VALUES (1); CALL "SUB58" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO CORRECT_OUTPUT VALUES (2);" * EXEC SQL INSERT INTO CORRECT_OUTPUT VALUES (2); CALL "SUB59" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO CORRECT_OUTPUT VALUES (1);" * EXEC SQL INSERT INTO CORRECT_OUTPUT VALUES (1); CALL "SUB60" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO CORRECT_OUTPUT VALUES (1);" * EXEC SQL INSERT INTO CORRECT_OUTPUT VALUES (1); CALL "SUB61" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO CORRECT_OUTPUT VALUES (1);" * EXEC SQL INSERT INTO CORRECT_OUTPUT VALUES (1); CALL "SUB62" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO CORRECT_OUTPUT VALUES (3);" * EXEC SQL INSERT INTO CORRECT_OUTPUT VALUES (3); CALL "SUB63" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO CORRECT_OUTPUT VALUES (1);" * EXEC SQL INSERT INTO CORRECT_OUTPUT VALUES (1); CALL "SUB64" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO CORRECT_OUTPUT VALUES (4);" * EXEC SQL INSERT INTO CORRECT_OUTPUT VALUES (4); CALL "SUB65" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO CORRECT_OUTPUT VALUES (1);" * EXEC SQL INSERT INTO CORRECT_OUTPUT VALUES (1); CALL "SUB66" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO CORRECT_OUTPUT VALUES (4);" * EXEC SQL INSERT INTO CORRECT_OUTPUT VALUES (4); CALL "SUB67" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "INSERT INTO CORRECT_OUTPUT VALUES (2);" * EXEC SQL INSERT INTO CORRECT_OUTPUT VALUES (2); CALL "SUB68" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DECLARE C0869 CURSOR FOR SELECT * FROM" DISPLAY " CORRECT_OUTPUT EXCEPT ALL SELECT * FROM LOSSY_OUTPUT" DISPLAY " ORDER BY PORTVAL;" * EXEC SQL DECLARE C0869 CURSOR FOR SELECT * FROM * CORRECT_OUTPUT EXCEPT ALL SELECT * FROM LOSSY_OUTPUT * ORDER BY PORTVAL END-EXEC DISPLAY "OPEN C0869;" * EXEC SQL OPEN C0869; CALL "SUB69" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " MOVE 0 TO cnt1 DISPLAY "FETCH C0869 INTO :cnt1;" * EXEC SQL FETCH C0869 INTO :cnt1; CALL "SUB70" USING SQLCODE SQLSTATE cnt1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "cnt1 should be 1; its value is ", cnt1 if (cnt1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 0 TO cnt1 DISPLAY "FETCH C0869 INTO :cnt1;" * EXEC SQL FETCH C0869 INTO :cnt1; CALL "SUB71" USING SQLCODE SQLSTATE cnt1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "cnt1 should be 1; its value is ", cnt1 if (cnt1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 0 TO cnt1 DISPLAY "FETCH C0869 INTO :cnt1;" * EXEC SQL FETCH C0869 INTO :cnt1; CALL "SUB72" USING SQLCODE SQLSTATE cnt1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "cnt1 should be 4; its value is ", cnt1 if (cnt1 NOT = 4) then MOVE 0 TO flag END-IF DISPLAY "FETCH C0869 INTO :cnt1;" * EXEC SQL FETCH C0869 INTO :cnt1; CALL "SUB73" USING SQLCODE SQLSTATE cnt1 MOVE SQLCODE TO SQL-COD DISPLAY "SQLCODE should be 100; its value is ", SQL-COD DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (SQLCODE NOT = 100 OR NORMSQ NOT = "02000") then MOVE 0 TO flag END-IF if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF DISPLAY " " DISPLAY "CLOSE C0869;" * EXEC SQL CLOSE C0869; CALL "SUB74" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " MOVE 0 TO cnt1 DISPLAY "SELECT COUNT(*) INTO :cnt1" DISPLAY " FROM CORRECT_AND_LOSSY" DISPLAY " WHERE PORTVAL = 1;" * EXEC SQL SELECT COUNT(*) INTO :cnt1 * FROM CORRECT_AND_LOSSY * WHERE PORTVAL = 1; CALL "SUB75" USING SQLCODE SQLSTATE cnt1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "cnt1 should be 5; its value is ", cnt1 if (cnt1 NOT = 5) then MOVE 0 TO flag END-IF MOVE 0 TO cnt1 DISPLAY "SELECT COUNT(*) INTO :cnt1" DISPLAY " FROM CORRECT_AND_LOSSY" DISPLAY " WHERE PORTVAL = 2;" * EXEC SQL SELECT COUNT(*) INTO :cnt1 * FROM CORRECT_AND_LOSSY * WHERE PORTVAL = 2; CALL "SUB76" USING SQLCODE SQLSTATE cnt1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "cnt1 should be 2; its value is ", cnt1 if (cnt1 NOT = 2) then MOVE 0 TO flag END-IF MOVE 0 TO cnt1 DISPLAY "SELECT COUNT(*) INTO :cnt1" DISPLAY " FROM CORRECT_AND_LOSSY" DISPLAY " WHERE PORTVAL = 3;" * EXEC SQL SELECT COUNT(*) INTO :cnt1 * FROM CORRECT_AND_LOSSY * WHERE PORTVAL = 3; CALL "SUB77" USING SQLCODE SQLSTATE cnt1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "cnt1 should be 1; its value is ", cnt1 if (cnt1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 0 TO cnt1 DISPLAY "SELECT COUNT(*) INTO :cnt1" DISPLAY " FROM CORRECT_AND_LOSSY" DISPLAY " WHERE PORTVAL = 4;" * EXEC SQL SELECT COUNT(*) INTO :cnt1 * FROM CORRECT_AND_LOSSY * WHERE PORTVAL = 4; CALL "SUB78" USING SQLCODE SQLSTATE cnt1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "cnt1 should be 1; its value is ", cnt1 if (cnt1 NOT = 1) then MOVE 0 TO flag END-IF DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB79" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP VIEW CORRECT_AND_LOSSY CASCADE;" * EXEC SQL DROP VIEW CORRECT_AND_LOSSY CASCADE; CALL "SUB80V" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB81" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP TABLE BILLS_SENT CASCADE;" * EXEC SQL DROP TABLE BILLS_SENT CASCADE; CALL "SUB80" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB81" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP TABLE PAYMENTS CASCADE;" * EXEC SQL DROP TABLE PAYMENTS CASCADE; CALL "SUB82" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB83" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP TABLE CORRECT_OUTPUT CASCADE;" * EXEC SQL DROP TABLE CORRECT_OUTPUT CASCADE; CALL "SUB84" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB85" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP TABLE LOSSY_OUTPUT CASCADE;" * EXEC SQL DROP TABLE LOSSY_OUTPUT CASCADE; CALL "SUB86" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB87" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0869','pass','MCO'); CALL "SUB88" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD else DISPLAY " dml164.mco *** fail *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0869','fail','MCO'); CALL "SUB89" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB90" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD ******************** END TEST0869 ******************** **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0 STOP RUN. * **** Procedures for PERFORM statements *Test SQLCODE and SQLSTATE for normal completion. CHCKOK. DISPLAY "SQLCODE should be 0; its value is ", SQL-COD DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then MOVE 0 TO flag END-IF if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF . NOSUBCLASS. *This routine replaces valid implementation-defined *subclasses with 000. This replacement equates valid *implementation-defined subclasses with the 000 value *expected by the test case; otherwise the test will fail. *After calling NOSUBCLASS, NORMSQ will be tested * SQLSTATE will be printed. MOVE SQLSTATE TO NORMSQ MOVE 3 TO norm1 *subclass begins in position 3 of char array NORMSQ *valid subclass begins with 5-9, I-Z, end of ALPNUM table PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *Quit if NORMSQ is unchanged. Subclass is not impl.-def. *Changed NORMSQ means implementation-defined subclass, *so proceed to zero it out, if valid (0-9,A-Z) if (NORMSQ = SQLSTATE) then GO TO EXIT-NOSUBCLASS END-IF MOVE 4 TO norm1 *examining position 4 of char array NORMSQ *valid characters are 0-9, A-Z PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM MOVE 5 TO norm1 *valid characters are 0-9, A-Z *examining position 5 of char array NORMSQ PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *implementation-defined subclasses are allowed for warnings *(class = 01). These equate to successful completion *SQLSTATE values of 00000. *Reference SQL-92 4.28 SQL-transactions, paragraph 2 if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then MOVE "0" TO NORMSQX(2) END-IF . EXIT-NOSUBCLASS. EXIT. [ zur Elbe Produktseite wechseln0.45Quellennavigators Analyse erneut starten ] |