| products/Sources/formale Sprachen/Cobol/Test-Suite/SQL M/ |
|
Quellcode-Bibliothek© Kompilation durch diese Firma[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]Datei: dml043.mco Sprache: Cobol |
|
||||||
|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML167. ENVIRONMENT DIVISION. CONFIGURATION SECTION. SOURCE-COMPUTER. xyz. OBJECT-COMPUTER. xyz. DATA DIVISION. WORKING-STORAGE SECTION. * Standard COBOL (file "DML167.SCO") calling SQL * procedures in file "DML167.MCO". **************************************************************** * * COMMENT SECTION * * DATE 1996-05-02 Module COBOL LANGUAGE * SQL VALIDATION TEST SUITE V6.0 * DISCLAIMER: * This program was written by employees of NIST to test SQL * implementations for conformance to the SQL standards. * NIST assumes no responsibility for any party's use of * this program. * * DML167.SCO * WRITTEN BY: David Flater * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE * * This routine tests Intermediate SQL. * * REFERENCES * FIPS PUB 127-2 14.2 Intermediate SQL * ANSI SQL-1992 * **************************************************************** * EXEC SQL BEGIN DECLARE SECTION END-EXEC 01 SQLCODE PIC S9(9) COMP. 01 SQLSTATE PIC X(5). 01 uid PIC X(18). 01 uidx PIC X(18). 01 int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 int2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. * EXEC SQL END DECLARE SECTION END-EXEC 01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 ALPNUM-TABLE VALUE IS "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ". 05 ALPNUM PIC X OCCURS 36 TIMES. 01 NORMSQ. 05 NORMSQX PIC X OCCURS 5 TIMES. 01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE. *date_time declaration 01 TO-DAY PIC 9(6). 01 THE-TIME PIC 9(8). 01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE. PROCEDURE DIVISION. P0. MOVE "FLATER " TO uid CALL "AUTHID" USING uid MOVE "not logged in, not" TO uidx * EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO; CALL "SUB1" USING SQLCODE SQLSTATE uidx MOVE SQLCODE TO SQL-COD * EXEC SQL ROLLBACK WORK; CALL "SUB2" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD if (uid NOT = uidx) then DISPLAY "ERROR: User ", uid, " expected. User ", uidx, " - " connected" STOP RUN END-IF MOVE 0 TO errcnt DISPLAY "SQL Test Suite, V6.0, Module COBOL, dml167.sco" DISPLAY "59-byte ID" DISPLAY "TEd Version #" *date_time print ACCEPT TO-DAY FROM DATE ACCEPT THE-TIME FROM TIME DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME ******************** BEGIN TEST0874 ******************* MOVE 1 TO flag DISPLAY " TEST0874" DISPLAY " INFORMATION_SCHEMA catalog columns" DISPLAY "References:" DISPLAY " F#35 -- Intermediate information schema" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE *This test checks all info schem columns containing the catalog *which were not previously accessed. MOVE 0 TO int1 DISPLAY "SELECT COUNT (DISTINCT TABLE_CATALOG)" DISPLAY " INTO :int1 FROM - " INFORMATION_SCHEMA.TABLE_CONSTRAINTS;" * EXEC SQL SELECT COUNT (DISTINCT TABLE_CATALOG) * INTO :int1 FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS * ; CALL "SUB3" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 99 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS" DISPLAY " WHERE TABLE_CATALOG <> (" DISPLAY " SELECT CATALOG_NAME FROM" DISPLAY " - " INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME)" DISPLAY " OR TABLE_CATALOG IS NULL;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS * WHERE TABLE_CATALOG <> ( * SELECT CATALOG_NAME FROM * INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME) * OR TABLE_CATALOG IS NULL; CALL "SUB4" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT (DISTINCT CONSTRAINT_CATALOG)" DISPLAY " INTO :int1 FROM - " INFORMATION_SCHEMA.KEY_COLUMN_USAGE;" * EXEC SQL SELECT COUNT (DISTINCT CONSTRAINT_CATALOG) * INTO :int1 FROM INFORMATION_SCHEMA.KEY_COLUMN_USAGE * ; CALL "SUB5" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 99 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFORMATION_SCHEMA.KEY_COLUMN_USAGE" DISPLAY " WHERE CONSTRAINT_CATALOG <> (" DISPLAY " SELECT CATALOG_NAME FROM" DISPLAY " - " INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME)" DISPLAY " OR CONSTRAINT_CATALOG IS NULL" DISPLAY " OR TABLE_CATALOG IS NULL;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM INFORMATION_SCHEMA.KEY_COLUMN_USAGE * WHERE CONSTRAINT_CATALOG <> ( * SELECT CATALOG_NAME FROM * INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME) * OR CONSTRAINT_CATALOG IS NULL * OR TABLE_CATALOG IS NULL; CALL "SUB6" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT (DISTINCT VIEW_CATALOG)" DISPLAY " INTO :int1 FROM - " INFORMATION_SCHEMA.VIEW_TABLE_USAGE;" * EXEC SQL SELECT COUNT (DISTINCT VIEW_CATALOG) * INTO :int1 FROM INFORMATION_SCHEMA.VIEW_TABLE_USAGE * ; CALL "SUB7" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 99 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFORMATION_SCHEMA.VIEW_TABLE_USAGE" DISPLAY " WHERE VIEW_CATALOG <> (" DISPLAY " SELECT CATALOG_NAME FROM" DISPLAY " - " INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME)" DISPLAY " OR VIEW_CATALOG IS NULL" DISPLAY " OR TABLE_CATALOG IS NULL;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM INFORMATION_SCHEMA.VIEW_TABLE_USAGE * WHERE VIEW_CATALOG <> ( * SELECT CATALOG_NAME FROM * INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME) * OR VIEW_CATALOG IS NULL * OR TABLE_CATALOG IS NULL; CALL "SUB8" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT (DISTINCT VIEW_CATALOG)" DISPLAY " INTO :int1 FROM - " INFORMATION_SCHEMA.VIEW_COLUMN_USAGE;" * EXEC SQL SELECT COUNT (DISTINCT VIEW_CATALOG) * INTO :int1 FROM INFORMATION_SCHEMA.VIEW_COLUMN_USAGE * ; CALL "SUB9" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 99 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFORMATION_SCHEMA.VIEW_COLUMN_USAGE" DISPLAY " WHERE VIEW_CATALOG <> (" DISPLAY " SELECT CATALOG_NAME FROM" DISPLAY " - " INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME)" DISPLAY " OR VIEW_CATALOG IS NULL" DISPLAY " OR TABLE_CATALOG IS NULL;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM INFORMATION_SCHEMA.VIEW_COLUMN_USAGE * WHERE VIEW_CATALOG <> ( * SELECT CATALOG_NAME FROM * INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME) * OR VIEW_CATALOG IS NULL * OR TABLE_CATALOG IS NULL; CALL "SUB10" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT (DISTINCT CONSTRAINT_CATALOG)" DISPLAY " INTO :int1 FROM - " INFORMATION_SCHEMA.CONSTRAINT_TABLE_USAGE;" * EXEC SQL SELECT COUNT (DISTINCT CONSTRAINT_CATALOG) * INTO :int1 FROM INFORMATION_SCHEMA.CONSTRAINT_TABLE_USAGE * ; CALL "SUB11" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 99 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFORMATION_SCHEMA.CONSTRAINT_TABLE_USAGE" DISPLAY " WHERE CONSTRAINT_CATALOG <> (" DISPLAY " SELECT CATALOG_NAME FROM" DISPLAY " - " INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME)" DISPLAY " OR CONSTRAINT_CATALOG IS NULL" DISPLAY " OR TABLE_CATALOG IS NULL;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM INFORMATION_SCHEMA.CONSTRAINT_TABLE_USAGE * WHERE CONSTRAINT_CATALOG <> ( * SELECT CATALOG_NAME FROM * INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME) * OR CONSTRAINT_CATALOG IS NULL * OR TABLE_CATALOG IS NULL; CALL "SUB12" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT (DISTINCT CONSTRAINT_CATALOG)" DISPLAY " INTO :int1 FROM - " INFORMATION_SCHEMA.CONSTRAINT_COLUMN_USAGE;" * EXEC SQL SELECT COUNT (DISTINCT CONSTRAINT_CATALOG) * INTO :int1 FROM * INFORMATION_SCHEMA.CONSTRAINT_COLUMN_USAGE; CALL "SUB13" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 99 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFORMATION_SCHEMA.CONSTRAINT_COLUMN_USAGE" DISPLAY " WHERE CONSTRAINT_CATALOG <> (" DISPLAY " SELECT CATALOG_NAME FROM" DISPLAY " - " INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME)" DISPLAY " OR CONSTRAINT_CATALOG IS NULL" DISPLAY " OR TABLE_CATALOG IS NULL;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM INFORMATION_SCHEMA.CONSTRAINT_COLUMN_USAGE * WHERE CONSTRAINT_CATALOG <> ( * SELECT CATALOG_NAME FROM * INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME) * OR CONSTRAINT_CATALOG IS NULL * OR TABLE_CATALOG IS NULL; CALL "SUB14" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT (DISTINCT DOMAIN_CATALOG)" DISPLAY " INTO :int1 FROM - " INFORMATION_SCHEMA.COLUMN_DOMAIN_USAGE;" * EXEC SQL SELECT COUNT (DISTINCT DOMAIN_CATALOG) * INTO :int1 FROM INFORMATION_SCHEMA.COLUMN_DOMAIN_USAGE * ; CALL "SUB15" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 99 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFORMATION_SCHEMA.COLUMN_DOMAIN_USAGE" DISPLAY " WHERE DOMAIN_CATALOG <> (" DISPLAY " SELECT CATALOG_NAME FROM" DISPLAY " - " INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME)" DISPLAY " OR DOMAIN_CATALOG IS NULL" DISPLAY " OR TABLE_CATALOG IS NULL;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM INFORMATION_SCHEMA.COLUMN_DOMAIN_USAGE * WHERE DOMAIN_CATALOG <> ( * SELECT CATALOG_NAME FROM * INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME) * OR DOMAIN_CATALOG IS NULL * OR TABLE_CATALOG IS NULL; CALL "SUB16" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT COUNT (DISTINCT CONSTRAINT_CATALOG)" DISPLAY " INTO :int1 FROM - " INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS;" * EXEC SQL SELECT COUNT (DISTINCT CONSTRAINT_CATALOG) * INTO :int1 FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS * ; CALL "SUB17" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 99 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS" DISPLAY " WHERE CONSTRAINT_CATALOG <> (" DISPLAY " SELECT CATALOG_NAME FROM" DISPLAY " - " INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME)" DISPLAY " OR CONSTRAINT_CATALOG IS NULL" DISPLAY " OR DOMAIN_CATALOG IS NULL;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS * WHERE CONSTRAINT_CATALOG <> ( * SELECT CATALOG_NAME FROM * INFORMATION_SCHEMA.INFORMATION_SCHEMA_CATALOG_NAME) * OR CONSTRAINT_CATALOG IS NULL * OR DOMAIN_CATALOG IS NULL; CALL "SUB18" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 0; its value is ", int1 if (int1 NOT = 0) then MOVE 0 TO flag END-IF DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB19" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0874','pass','MCO'); CALL "SUB20" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD else DISPLAY " dml167.mco *** fail *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0874','fail','MCO'); CALL "SUB21" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB22" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD ******************** END TEST0874 ******************** ******************** BEGIN TEST0875 ******************* MOVE 1 TO flag DISPLAY " TEST0875" DISPLAY " INFORMATION_SCHEMA column coverage" DISPLAY "References:" DISPLAY " F#35 -- Intermediate information schema" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE DISPLAY "CREATE TABLE TAB1 (" DISPLAY " C1 INT, C2 INT, C3 INT," DISPLAY " PRIMARY KEY (C1, C2));" * EXEC SQL CREATE TABLE TAB1 ( * C1 INT, C2 INT, C3 INT, * PRIMARY KEY (C1, C2)); CALL "SUB23" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB24" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "CREATE TABLE TAB2 (" DISPLAY " D1 INT PRIMARY KEY, D2 INT, D3 INT," DISPLAY " FOREIGN KEY (D2, D3) REFERENCES TAB1);" * EXEC SQL CREATE TABLE TAB2 ( * D1 INT PRIMARY KEY, D2 INT, D3 INT, * FOREIGN KEY (D2, D3) REFERENCES TAB1); CALL "SUB25" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB26" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *This test checks existence of columns that were missed in the C MOVE 0 TO int1 DISPLAY "SELECT ORDINAL_POSITION INTO :int1" DISPLAY " FROM INFORMATION_SCHEMA.KEY_COLUMN_USAGE" DISPLAY " WHERE COLUMN_NAME = 'CONST_ID'" DISPLAY " AND TABLE_NAME = 'CONSTITUENTS'" DISPLAY " AND TABLE_SCHEMA = 'TIDES';" * EXEC SQL SELECT ORDINAL_POSITION INTO :int1 * FROM INFORMATION_SCHEMA.KEY_COLUMN_USAGE * WHERE COLUMN_NAME = 'CONST_ID' * AND TABLE_NAME = 'CONSTITUENTS' * AND TABLE_SCHEMA = 'TIDES'; CALL "SUB27" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 2; its value is ", int1 if (int1 NOT = 2) then MOVE 0 TO flag END-IF *21.3.14 DS.3: ORDINAL_POSITION is within the referenced unique *constraint MOVE 0 TO int1 DISPLAY "SELECT ORDINAL_POSITION INTO :int1" DISPLAY " FROM INFORMATION_SCHEMA.KEY_COLUMN_USAGE" DISPLAY " WHERE COLUMN_NAME = 'D2'" DISPLAY " AND TABLE_NAME = 'TAB2'" DISPLAY " AND TABLE_SCHEMA = 'FLATER';" * EXEC SQL SELECT ORDINAL_POSITION INTO :int1 * FROM INFORMATION_SCHEMA.KEY_COLUMN_USAGE * WHERE COLUMN_NAME = 'D2' * AND TABLE_NAME = 'TAB2' * AND TABLE_SCHEMA = 'FLATER'; CALL "SUB28" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF MOVE 0 TO int1 DISPLAY "SELECT ORDINAL_POSITION INTO :int1" DISPLAY " FROM INFORMATION_SCHEMA.KEY_COLUMN_USAGE" DISPLAY " WHERE COLUMN_NAME = 'D1'" DISPLAY " AND TABLE_NAME = 'TAB2'" DISPLAY " AND TABLE_SCHEMA = 'FLATER';" * EXEC SQL SELECT ORDINAL_POSITION INTO :int1 * FROM INFORMATION_SCHEMA.KEY_COLUMN_USAGE * WHERE COLUMN_NAME = 'D1' * AND TABLE_NAME = 'TAB2' * AND TABLE_SCHEMA = 'FLATER'; CALL "SUB29" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 1; its value is ", int1 if (int1 NOT = 1) then MOVE 0 TO flag END-IF *Constraints: primary key in TAB1; referential constraint from *Erratum X3H2-96-56 / DBL MCI-066: want referenced columns, not *referencing MOVE 0 TO int1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFORMATION_SCHEMA.CONSTRAINT_COLUMN_USAGE" DISPLAY " WHERE TABLE_NAME = 'TAB1'" DISPLAY " AND COLUMN_NAME = 'C1'" DISPLAY " AND TABLE_SCHEMA = 'FLATER'" DISPLAY " AND CONSTRAINT_SCHEMA IS NOT NULL;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM INFORMATION_SCHEMA.CONSTRAINT_COLUMN_USAGE * WHERE TABLE_NAME = 'TAB1' * AND COLUMN_NAME = 'C1' * AND TABLE_SCHEMA = 'FLATER' * AND CONSTRAINT_SCHEMA IS NOT NULL; CALL "SUB30" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 should be 2; its value is ", int1 if (int1 NOT = 2) then MOVE 0 TO flag END-IF COMPUTE int1 = -1 DISPLAY "SELECT COUNT(*) INTO :int1" DISPLAY " FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS;" * EXEC SQL SELECT COUNT(*) INTO :int1 * FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS; CALL "SUB31" USING SQLCODE SQLSTATE int1 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " COMPUTE int2 = -2 DISPLAY "SELECT COUNT(*) INTO :int2" DISPLAY " FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS" DISPLAY " WHERE (IS_DEFERRABLE = 'NO' AND - " INITIALLY_DEFERRED = 'NO') OR" DISPLAY " (IS_DEFERRABLE = 'YES' AND (INITIALLY_DEFERRED = - " 'NO' OR" DISPLAY " INITIALLY_DEFERRED = 'YES'));" * EXEC SQL SELECT COUNT(*) INTO :int2 * FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS * WHERE (IS_DEFERRABLE = 'NO' AND INITIALLY_DEFERRED = * 'NO') OR * (IS_DEFERRABLE = 'YES' AND (INITIALLY_DEFERRED = 'NO' OR * INITIALLY_DEFERRED = 'YES')); CALL "SUB32" USING SQLCODE SQLSTATE int2 MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "int1 and int2 should be equal." DISPLAY "int1 is ", int1, "; int2 is ", int2 if (int1 NOT = int2) then MOVE 0 TO flag END-IF DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB33" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP TABLE TAB1 CASCADE;" * EXEC SQL DROP TABLE TAB1 CASCADE; CALL "SUB34" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB35" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP TABLE TAB2 CASCADE;" * EXEC SQL DROP TABLE TAB2 CASCADE; CALL "SUB36" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" * EXEC SQL COMMIT WORK; CALL "SUB37" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " *** pass *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0875','pass','MCO'); CALL "SUB38" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD else DISPLAY " dml167.mco *** fail *** " * EXEC SQL INSERT INTO HU.TESTREPORT * VALUES('0875','fail','MCO'); CALL "SUB39" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" * EXEC SQL COMMIT WORK; CALL "SUB40" USING SQLCODE SQLSTATE MOVE SQLCODE TO SQL-COD ******************** END TEST0875 ******************** **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0 STOP RUN. * **** Procedures for PERFORM statements *Test SQLCODE and SQLSTATE for normal completion. CHCKOK. DISPLAY "SQLCODE should be 0; its value is ", SQL-COD DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then MOVE 0 TO flag END-IF if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF . NOSUBCLASS. *This routine replaces valid implementation-defined *subclasses with 000. This replacement equates valid *implementation-defined subclasses with the 000 value *expected by the test case; otherwise the test will fail. *After calling NOSUBCLASS, NORMSQ will be tested * SQLSTATE will be printed. MOVE SQLSTATE TO NORMSQ MOVE 3 TO norm1 *subclass begins in position 3 of char array NORMSQ *valid subclass begins with 5-9, I-Z, end of ALPNUM table PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *Quit if NORMSQ is unchanged. Subclass is not impl.-def. *Changed NORMSQ means implementation-defined subclass, *so proceed to zero it out, if valid (0-9,A-Z) if (NORMSQ = SQLSTATE) then GO TO EXIT-NOSUBCLASS END-IF MOVE 4 TO norm1 *examining position 4 of char array NORMSQ *valid characters are 0-9, A-Z PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM MOVE 5 TO norm1 *valid characters are 0-9, A-Z *examining position 5 of char array NORMSQ PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *implementation-defined subclasses are allowed for warnings *(class = 01). These equate to successful completion *SQLSTATE values of 00000. *Reference SQL-92 4.28 SQL-transactions, paragraph 2 if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then MOVE "0" TO NORMSQX(2) END-IF . EXIT-NOSUBCLASS. EXIT. ¤ Dauer der Verarbeitung: 0.38 Sekunden (vorverarbeitet) ¤ |
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:Die farbliche Syntaxdarstellung ist noch experimentell.Bot Zugriff |
