|
Quellcode-Bibliothek
© Kompilation durch diese Firma
[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]
Datei:
dml057.cob
Sprache: Cobol
|
|
IDENTIFICATION DIVISION.
PROGRAM-ID. XTS730.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "XTS730.SCO") calling SQL
* procedures in file "XTS730.MCO".
*Copyright 1995 National Computing Centre Limited
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* XTS730.SCO
* WRITTEN BY: Manolis Megaloikonomou
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* Table name with 19 characters - delimited.
*
* REFERENCES
* 11.3 -- <table definition>
* 5.4 -- <Names and identifiers>
* 5.4 GR.1
* 5.2 -- <token> and <separator>
* 5.2 SR.9
* 5.2 SR.13
* 5.2 SR.14
* 5.2 LR.2a -- Raised. Entry SQL restriction which
* restricted the length of a <regular identifier>
* up to 18 <character representation>s.
* F#2 -- Basic information schema.
* F#3 -- Basic schema manipulation.
* F#39 -- Long identifiers.
*
* DATE LAST ALTERED 12/12/95 CTS5 Hand-over Test
*
* Cleanups and fixes by V. Kogakis 05/12/95:
* Include Files
* Define NOSUBCLASS/CHCKOK at test beginning
* Define cal variable
* Add ROLLBACK after AUTHID
* print timestamp
* delete multiple SQLCODE and SQLSTATE initialisation
* change string initialisation
* Clean-up database at the end of the test
*
* QA Status: Full FC
*
*Revised by DWF 1996-02-05
* Fixed SDL transactions
* Fixed printouts
* Removed CHCKOK after cursor definition
* Removed field widths from printfs
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 aa PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 bb PIC X(49).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Module COBOL, xts730.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7030 *******************
MOVE 1 TO flag
DISPLAY " TEST7030 "
DISPLAY " Table name with 19 characters - delimited."
DISPLAY "References:"
DISPLAY " 11.3 -- "
DISPLAY " 5.4 -- "
DISPLAY " 5.4 GR.1"
DISPLAY " 5.2 -- and "
DISPLAY " 5.2 SR.9"
DISPLAY " 5.2 SR.13"
DISPLAY " 5.2 SR.14"
DISPLAY " 5.2 LR.2a -- Raised. Entry SQL restriction
- " which"
DISPLAY " restricted the length of a
- " identifier>"
DISPLAY " up to 18 s."
DISPLAY " F#2 -- Basic information schema."
DISPLAY " F#3 -- Basic schema manipulation."
DISPLAY " F#39 -- Long identifiers."
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "Note: This test will need some changes if your
- " collating"
DISPLAY "sequence is not ASCII."
*Initialise error reporting variables
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*Create tables
*Ensure all have names which are 19 characters long
*Ensure names include upper & lower cases, digits and punctuatio
DISPLAY "CREATE TABLE ""LONGIDENTIFIERSAAAA"" (TNUM
- " NUMERIC(5));"
* EXEC SQL CREATE TABLE "LONGIDENTIFIERSAAAA" (TNUM
* NUMERIC(5));
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "CREATE TABLE ""longidentifiersaaab"" (TNUM
- " NUMERIC(5));"
* EXEC SQL CREATE TABLE "longidentifiersaaab" (TNUM
* NUMERIC(5));
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "CREATE TABLE ""0""""LONGIDENTIFIERS_1"" (TNUM
- " NUMERIC(5));"
* EXEC SQL CREATE TABLE "0""LONGIDENTIFIERS_1" (TNUM
* NUMERIC(5));
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "CREATE TABLE ""0""""LONGIDENTIFIERS_2"" (TNUM
- " NUMERIC(5));"
* EXEC SQL CREATE TABLE "0""LONGIDENTIFIERS_2" (TNUM
* NUMERIC(5));
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "CREATE TABLE ""lngIDENTIFIER% .,()"" (TNUM
- " NUMERIC(5));"
* EXEC SQL CREATE TABLE "lngIDENTIFIER% .,()" (TNUM
* NUMERIC(5));
CALL "SUB11" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB12" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Initialize host variables
MOVE 99 TO aa
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO
bb
*Ensure all tables are mentioned in the INFORMATION_SCHEMA
DISPLAY "SELECT COUNT(*) INTO :aa FROM
- " INFORMATION_SCHEMA.TABLES"
DISPLAY "WHERE TABLE_SCHEMA = 'CTS1' AND TABLE_TYPE = 'BASE
- " TABLE'"
DISPLAY "AND (TABLE_NAME = 'LONGIDENTIFIERSAAAA'"
DISPLAY " OR TABLE_NAME = 'longidentifiersaaab'"
DISPLAY " OR TABLE_NAME = '0""LONGIDENTIFIERS_1'"
DISPLAY " OR TABLE_NAME = '0""LONGIDENTIFIERS_2'"
DISPLAY " OR TABLE_NAME = 'lngIDENTIFIER% .,()' );"
* EXEC SQL SELECT COUNT(*) INTO :aa
* FROM INFORMATION_SCHEMA.TABLES
* WHERE TABLE_SCHEMA = 'CTS1'
* AND TABLE_TYPE = 'BASE TABLE'
* AND ( TABLE_NAME = 'LONGIDENTIFIERSAAAA'
* OR TABLE_NAME = 'longidentifiersaaab'
* OR TABLE_NAME = '0"LONGIDENTIFIERS_1'
* OR TABLE_NAME = '0"LONGIDENTIFIERS_2'
* OR TABLE_NAME = 'lngIDENTIFIER% .,()' );
CALL "SUB13" USING SQLCODE SQLSTATE aa
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "aa should be 5; its value is: aa = ", aa
if ( aa NOT = 5 ) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*Ensure all INFORMATION_SCHEMA entries are correct
DISPLAY "DECLARE a CURSOR"
DISPLAY "FOR SELECT TABLE_NAME FROM
- " INFORMATION_SCHEMA.TABLES"
DISPLAY "WHERE TABLE_SCHEMA = 'CTS1' AND TABLE_TYPE = 'BASE
- " TABLE'"
DISPLAY "AND (TABLE_NAME = 'LONGIDENTIFIERSAAAA'"
DISPLAY " OR TABLE_NAME = 'longidentifiersaaab'"
DISPLAY " OR TABLE_NAME = '0""LONGIDENTIFIERS_1'"
DISPLAY " OR TABLE_NAME = '0""LONGIDENTIFIERS_2'"
DISPLAY " OR TABLE_NAME = 'lngIDENTIFIER% .,()' );"
DISPLAY "ORDER BY TABLE_NAME;"
* EXEC SQL DECLARE a CURSOR
* FOR SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
* WHERE TABLE_SCHEMA = 'CTS1' AND TABLE_TYPE = 'BASE TABLE'
* AND ( TABLE_NAME = 'LONGIDENTIFIERSAAAA'
* OR TABLE_NAME = 'longidentifiersaaab'
* OR TABLE_NAME = '0"LONGIDENTIFIERS_1'
* OR TABLE_NAME = '0"LONGIDENTIFIERS_2'
* OR TABLE_NAME = 'lngIDENTIFIER% .,()' )
* ORDER BY TABLE_NAME END-EXEC
DISPLAY "OPEN a;"
* EXEC SQL OPEN a;
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "FETCH a INTO :bb;"
* EXEC SQL FETCH a INTO :bb;
CALL "SUB15" USING SQLCODE SQLSTATE bb
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "bb should be 0""LONGIDENTIFIERS_1; its value is ",
bb
if (bb NOT = "0""LONGIDENTIFIERS_1") then
MOVE 0 TO flag
END-IF
DISPLAY " "
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO
bb
DISPLAY "FETCH a INTO :bb;"
* EXEC SQL FETCH a INTO :bb;
CALL "SUB16" USING SQLCODE SQLSTATE bb
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "bb should be 0""LONGIDENTIFIERS_2; its value is ",
bb
if (bb NOT = "0""LONGIDENTIFIERS_2") then
MOVE 0 TO flag
END-IF
DISPLAY " "
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO
bb
DISPLAY "FETCH a INTO :bb;"
* EXEC SQL FETCH a INTO :bb;
CALL "SUB17" USING SQLCODE SQLSTATE bb
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "bb should be LONGIDENTIFIERSAAAA; its value is ",
bb
if (bb NOT = "LONGIDENTIFIERSAAAA") then
MOVE 0 TO flag
END-IF
DISPLAY " "
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO
bb
DISPLAY "FETCH a INTO :bb;"
* EXEC SQL FETCH a INTO :bb;
CALL "SUB18" USING SQLCODE SQLSTATE bb
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "bb should be lngIDENTIFIER% .,(); its value is ",
bb
if (bb NOT = "lngIDENTIFIER% .,()") then
MOVE 0 TO flag
END-IF
DISPLAY " "
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO
bb
DISPLAY "FETCH a INTO :bb;"
* EXEC SQL FETCH a INTO :bb;
CALL "SUB19" USING SQLCODE SQLSTATE bb
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "bb should be longidentifiersaaab; its value is ",
bb
if (bb NOT = "longidentifiersaaab") then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB20" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Now clean-up database
DISPLAY "DROP TABLE ""LONGIDENTIFIERSAAAA"" CASCADE;"
* EXEC SQL DROP TABLE "LONGIDENTIFIERSAAAA" CASCADE;
CALL "SUB21" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE ""longidentifiersaaab"" CASCADE;"
* EXEC SQL DROP TABLE "longidentifiersaaab" CASCADE;
CALL "SUB22" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE ""0""""LONGIDENTIFIERS_1"" CASCADE;"
* EXEC SQL DROP TABLE "0""LONGIDENTIFIERS_1" CASCADE;
CALL "SUB23" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE ""0""""LONGIDENTIFIERS_2"" CASCADE;"
* EXEC SQL DROP TABLE "0""LONGIDENTIFIERS_2" CASCADE;
CALL "SUB24" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE ""lngIDENTIFIER% .,()"" CASCADE;"
* EXEC SQL DROP TABLE "lngIDENTIFIER% .,()" CASCADE;
CALL "SUB25" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB26" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " xts730.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7030','pass','MCO');
CALL "SUB27" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " xts730.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7030','fail','MCO');
CALL "SUB28" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "========================================"
* EXEC SQL COMMIT WORK;
CALL "SUB29" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7030 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.44 Sekunden
(vorverarbeitet)
¤
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
|
|
