|
Quellcode-Bibliothek
© Kompilation durch diese Firma
[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]
Datei:
yts757.cob
Sprache: Cobol
|
|
IDENTIFICATION DIVISION.
PROGRAM-ID. YTS757.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "YTS757.SCO") calling SQL
* procedures in file "YTS757.MCO".
*Copyright 1996 National Computing Centre Limited,
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* YTS757.SCO
* WRITTEN BY: Susan Watters
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* INSERT Values in column defined on a domain
*
*
* REFERENCES
* 11.21 <domain definition>
* 11.4 <column definition>
* 11.3 <table definition>
* 13.8 <insert statement>
* F#25 Domain definition
* F#3 Basic schema manipulation
*
* DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
*
* QA Status: Full FC
*
* Revised by DWF 1996-03-05
* Added rollback after authid
* Cleanup
* Removed EXEC SQL from inside printfs
* Moved table used by both tests outside of tests
* Fixed printouts
* Fixed wrong values inserted
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 co PIC X(1).
01 co2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Module COBOL, yts757.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
*Create table used by both tests
DISPLAY "CREATE TABLE dom_chk"
DISPLAY "(col1 atom,"
DISPLAY " col2 smint);"
* EXEC SQL CREATE TABLE dom_chk
* (col1 atom,
* col2 smint);
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLSTATE should be 00000; it is ", SQLSTATE
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLSTATE should be 00000; it is ", SQLSTATE
******************** BEGIN TEST7507 *******************
MOVE 1 TO flag
DISPLAY " TEST7507 "
DISPLAY " INSERT value in column defined on domain"
DISPLAY "References:"
DISPLAY " 11.21 "
DISPLAY " 11.4 "
DISPLAY " 11.3 "
DISPLAY " 13.8 "
DISPLAY " F#25 Domain definition"
DISPLAY " F#3 Basic schema manipulation"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
MOVE "x" TO co
MOVE 99 TO co2
*create a table which uses domains atom and smint
*These are defined in cts5sch2.smi
*integer domain 'smint' range 1 to 100
*reference character domain 'atom' range 'a' to 'm'
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*insert a row into dom_chk
DISPLAY "Insert a correct row into dom_chk"
DISPLAY "INSERT INTO dom_chk VALUES ('c',38);"
* EXEC SQL INSERT INTO dom_chk VALUES ('c',38);
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Check row has inserted correctly
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "SELECT col1, col2 INTO :co, :co2 FROM dom_chk;"
* EXEC SQL SELECT col1, col2 INTO :co, :co2 FROM dom_chk
* ;
CALL "SUB6" USING SQLCODE SQLSTATE co co2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be c; its value is ", co
DISPLAY "co2 should be 38; its value is ", co2
if (co NOT = "c" OR co2 NOT = 38) then
MOVE 0 TO flag
END-IF
*check scope of domains
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "INSERT INTO dom_chk VALUES ('a',1);"
* EXEC SQL INSERT INTO dom_chk VALUES ('a',1);
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO dom_chk VALUES ('m', 100);"
* EXEC SQL INSERT INTO dom_chk VALUES ('m', 100);
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*attempt to insert incorrect value into table
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "INSERT INTO dom_chk VALUES ('z', 101);"
* EXEC SQL INSERT INTO dom_chk VALUES ('z', 101);
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*That should generate an integrity constraint violation
*which is SQLSTATE 23000
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "23000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
*check that the table does not contain that row
MOVE 1 TO co2
DISPLAY "SELECT COUNT (*) INTO :co2 FROM dom_chk"
DISPLAY "WHERE col1 = 'z';"
* EXEC SQL SELECT COUNT (*) INTO :co2 FROM dom_chk
* WHERE col1 = 'z';
CALL "SUB10" USING SQLCODE SQLSTATE co2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co2 should be 0; its value is ", co2
if (co2 NOT = 0) then
MOVE 0 TO flag
END-IF
*Attempt to update row with value that breaks dom constraint
DISPLAY "UPDATE dom_chk"
DISPLAY "SET col1 = 'q'"
DISPLAY "WHERE col2 = 38;"
* EXEC SQL UPDATE dom_chk
* SET col1 = 'q'
* WHERE col2 = 38;
CALL "SUB11" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*That should generate an integrity constraint violation
*which is SQLSTATE 23000
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "23000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
*check that the table does not contain that row
MOVE 1 TO co2
DISPLAY "SELECT COUNT (*) INTO :co2 FROM dom_chk"
DISPLAY "WHERE col1 = 'q';"
* EXEC SQL SELECT COUNT (*) INTO :co2 FROM dom_chk
* WHERE col1 = 'q';
CALL "SUB12" USING SQLCODE SQLSTATE co2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co2 should be 0; its value is ", co2
if (co2 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts757.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7507','pass','MCO');
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts757.pc *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7507','fail','MCO');
CALL "SUB15" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB16" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7507 ********************
******************** BEGIN TEST7508 *******************
MOVE 1 TO flag
DISPLAY " TEST7508 "
DISPLAY " Put value in col defined on dom breaking
- " constraint"
DISPLAY "References:"
DISPLAY " 11.21 "
DISPLAY " 11.3 "
DISPLAY " 11.4 "
DISPLAY " 11.25 "
DISPLAY " F#25 Domain definition"
DISPLAY " F#3 Basic schema manipulation"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*dom_chk contains two cols referencing two domains
*first has range 'a' to 'm'
*second has range 1 to 100
*Insert into dom_chk values that break first domain constraint
DISPLAY "INSERT INTO dom_chk VALUES ('<', 100);"
* EXEC SQL INSERT INTO dom_chk VALUES ('<', 100);
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*That should generate an integrity constraint violation
*which is SQLSTATE 23000
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "23000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
*Insert into dom_chk values to break second domain constraint
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "INSERT INTO dom_chk VALUES ('a', 101);"
* EXEC SQL INSERT INTO dom_chk VALUES ('a', 101);
CALL "SUB18" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*That should generate an integrity constraint violation
*which is SQLSTATE 23000
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "23000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB19" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if ( flag = 1 ) then
DISPLAY " yts757.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7508','pass','MCO');
CALL "SUB20" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts757.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7508','fail','MCO');
CALL "SUB21" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB22" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7508 ********************
*Clean up
DISPLAY "DROP TABLE dom_chk CASCADE;"
* EXEC SQL DROP TABLE dom_chk CASCADE;
CALL "SUB23" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLSTATE should be 00000; it is ", SQLSTATE
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB24" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLSTATE should be 00000; it is ", SQLSTATE
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.25 Sekunden
(vorverarbeitet)
¤
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
| |
