Quelle isi002.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  ISI002.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * Standard COBOL (file "ISI002.SCO") calling SQL
      * procedures in file "ISI002.MCO".

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1993/06/16 Module COBOL LANGUAGE
      * SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * ISI002.SCO
      * WRITTEN BY:  David W. Flater
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *
      *   THIS ROUTINE TESTS THE INFORMATION SCHEMA FOR
      *   INTERMEDIATE SQL.
      *
      * REFERENCES
      *   ANSI SQL-1992
      *     21 Information Schema and Definition Schema
      *
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  ctr1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ctr2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  copt PIC  X(8).
       01  iupt PIC  X(3).
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "FLATER " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB2" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Module COBOL, isi002.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST0569 *******************
             MOVE 1 TO flag

      *Intermediate SQL.  Examine the contents of the VIEWS
      *view in INFORMATION_SCHEMA with regards to pre-existing
      *objects in our own schema (FLATER).  This test is primarily
      *concerned with making sure that all the columns are there
      *and have something resembling the correct data types.
      *It also checks the functionality of the VIEWS view w.r.t.
      *pre-existing objects in our own schema.  Objects in other
      *schemas, privileges, and dynamically created objects are
      *tested later.

             DISPLAY " TEST0569 "
             DISPLAY " INFORMATION_SCHEMA.VIEWS definition"
             DISPLAY " Reference ANSI SQL-1992"
             DISPLAY " 21.2.8 VIEWS view"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *Verify CONSTRAINT CHECK_OPTION_NOT_NULL

             COMPUTE ctr1 = -1
             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS"
             DISPLAY "WHERE CHECK_OPTION IS NULL;"

      *  EXEC SQL SELECT COUNT(*) INTO :ctr1
      *    FROM INFORMATION_SCHEMA.VIEWS
      *    WHERE CHECK_OPTION IS NULL;
             CALL "SUB3" USING SQLCODE SQLSTATE ctr1
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *Verify CONSTRAINT IS_UPDATABLE_NOT_NULL

             COMPUTE ctr1 = -1
             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS"
             DISPLAY "WHERE IS_UPDATABLE IS NULL;"

      *  EXEC SQL SELECT COUNT(*) INTO :ctr1
      *    FROM INFORMATION_SCHEMA.VIEWS
      *    WHERE IS_UPDATABLE IS NULL;
             CALL "SUB4" USING SQLCODE SQLSTATE ctr1
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *Verify CONSTRAINT IS_UPDATABLE_CHECK

             COMPUTE ctr1 = -1
             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS"
             DISPLAY "WHERE IS_UPDATABLE <> 'YES'"
             DISPLAY "AND IS_UPDATABLE <> 'NO';"

      *  EXEC SQL SELECT COUNT(*) INTO :ctr1
      *    FROM INFORMATION_SCHEMA.VIEWS
      *    WHERE IS_UPDATABLE <> 'YES'
      *    AND IS_UPDATABLE <> 'NO';
             CALL "SUB5" USING SQLCODE SQLSTATE ctr1
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *Verify CONSTRAINT VIEWS_PRIMARY_KEY

             COMPUTE ctr1 = -1
             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS"
             DISPLAY "WHERE TABLE_SCHEMA IS NULL"
             DISPLAY "OR TABLE_NAME IS NULL;"

      *  EXEC SQL SELECT COUNT(*) INTO :ctr1
      *    FROM INFORMATION_SCHEMA.VIEWS
      *    WHERE TABLE_SCHEMA IS NULL
      *    OR TABLE_NAME IS NULL;
             CALL "SUB6" USING SQLCODE SQLSTATE ctr1
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             COMPUTE ctr1 = -1
             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS;"

      *  EXEC SQL SELECT COUNT(*) INTO :ctr1
      *    FROM INFORMATION_SCHEMA.VIEWS;
             CALL "SUB7" USING SQLCODE SQLSTATE ctr1
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE ctr2 = -1
             DISPLAY "SELECT COUNT(*) INTO :ctr2"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS A,"
             DISPLAY " INFORMATION_SCHEMA.VIEWS B"
             DISPLAY "WHERE A.TABLE_SCHEMA = B.TABLE_SCHEMA"
             DISPLAY "AND A.TABLE_NAME = B.TABLE_NAME;"

      *  EXEC SQL SELECT COUNT(*) INTO :ctr2
      *    FROM INFORMATION_SCHEMA.VIEWS A,
      *    INFORMATION_SCHEMA.VIEWS B
      *    WHERE A.TABLE_SCHEMA = B.TABLE_SCHEMA
      *    AND A.TABLE_NAME = B.TABLE_NAME;
             CALL "SUB8" USING SQLCODE SQLSTATE ctr2
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be equal to ctr2."
             DISPLAY "ctr1 is ", ctr1, "; ctr2 is ", ctr2, "."
             if (ctr1  NOT =  ctr2) then
               MOVE 0 TO flag
             END-IF

      *Verify CONSTRAINT VIEWS_IN_TABLES_CHECK

             COMPUTE ctr1 = -1
             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS A WHERE NOT EXISTS"
             DISPLAY "(SELECT * FROM INFORMATION_SCHEMA.TABLES B"
             DISPLAY "WHERE A.TABLE_SCHEMA = B.TABLE_SCHEMA"
             DISPLAY "AND A.TABLE_NAME = B.TABLE_NAME"
             DISPLAY "AND B.TABLE_TYPE = 'VIEW');"

      *  EXEC SQL SELECT COUNT(*) INTO :ctr1
      *    FROM INFORMATION_SCHEMA.VIEWS A WHERE NOT EXISTS
      *    (SELECT * FROM INFORMATION_SCHEMA.TABLES B
      *    WHERE A.TABLE_SCHEMA = B.TABLE_SCHEMA
      *    AND A.TABLE_NAME = B.TABLE_NAME
      *    AND B.TABLE_TYPE = 'VIEW');
             CALL "SUB9" USING SQLCODE SQLSTATE ctr1
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *Verify CONSTRAINT VIEWS_IS_UPDATABLE_CHECK_OPTION_CHECK

             COMPUTE ctr1 = -1
             DISPLAY "SELECT COUNT(*) INTO :ctr1"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS WHERE"
             DISPLAY "IS_UPDATABLE = 'NO' AND CHECK_OPTION <> 'NONE';"

      *  EXEC SQL SELECT COUNT(*) INTO :ctr1
      *    FROM INFORMATION_SCHEMA.VIEWS WHERE
      *    IS_UPDATABLE = 'NO' AND CHECK_OPTION <> 'NONE';
             CALL "SUB10" USING SQLCODE SQLSTATE ctr1
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "ctr1 should be 0; its value is ", ctr1
             if (ctr1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *Make sure VIEW_DEFINITION is there.

             DISPLAY "SELECT VIEW_DEFINITION INTO :copt:ctr1"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS"
             DISPLAY "WHERE TABLE_SCHEMA = 'FLATER'"
             DISPLAY "AND TABLE_NAME = 'DV1';"

             COMPUTE ctr1 = -2
             MOVE "xxxxxxxx" TO copt
      *  EXEC SQL SELECT VIEW_DEFINITION INTO :copt:ctr1
      *    FROM INFORMATION_SCHEMA.VIEWS
      *    WHERE TABLE_SCHEMA = 'FLATER'
      *    AND TABLE_NAME = 'DV1';
             CALL "SUB11" USING SQLCODE SQLSTATE copt ctr1
             MOVE SQLCODE TO SQL-COD

             DISPLAY "copt is ", copt, ", ctr1 is ", ctr1
             DISPLAY "SQLCODE is ", SQL-COD, ", SQLSTATE is ", SQLSTATE
             DISPLAY "Acceptable cases:"
             DISPLAY " 1. ctr1 is 0 or -1, status codes are normal"
             DISPLAY " 2. ctr1 is positive, SQLSTATE says 01004"

             if (ctr1  <  -1) then
               MOVE 0 TO flag
               GO TO P100
             END-IF
             if (ctr1  >  0) then
               if (SQLCODE  <  0  OR  SQLSTATE  NOT  =   "01004") then
                 MOVE 0 TO flag
               END-IF
               GO TO P100
             END-IF
             if (SQLCODE  NOT =  0  OR  SQLSTATE  NOT  =   "00000") then
               MOVE 0 TO flag
             END-IF

           .
        P100.
      *Verify the metadata on a few boring views; no fancy features.

             DISPLAY "SELECT CHECK_OPTION, IS_UPDATABLE"
             DISPLAY "INTO :copt, :iupt"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS"
             DISPLAY "WHERE TABLE_SCHEMA = 'FLATER'"
             DISPLAY "AND TABLE_NAME = 'DV1';"

             MOVE "xxxxxxxx" TO copt
             MOVE "xxx" TO iupt
      *  EXEC SQL SELECT CHECK_OPTION, IS_UPDATABLE
      *    INTO :copt, :iupt
      *    FROM INFORMATION_SCHEMA.VIEWS
      *    WHERE TABLE_SCHEMA = 'FLATER'
      *    AND TABLE_NAME = 'DV1';
             CALL "SUB12" USING SQLCODE SQLSTATE copt iupt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "copt should be 'NONE'; its value is '", copt, "'"
             if (copt  NOT  =   "NONE") then
               MOVE 0 TO flag
             END-IF
             DISPLAY "iupt should be 'YES'; its value is '", iupt, "'"
             if (iupt  NOT  =   "YES") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT CHECK_OPTION, IS_UPDATABLE"
             DISPLAY "INTO :copt, :iupt"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS"
             DISPLAY "WHERE TABLE_SCHEMA = 'FLATER'"
             DISPLAY "AND TABLE_NAME = 'WCOV';"

             MOVE "xxxxxxxx" TO copt
             MOVE "xxx" TO iupt
      *  EXEC SQL SELECT CHECK_OPTION, IS_UPDATABLE
      *    INTO :copt, :iupt
      *    FROM INFORMATION_SCHEMA.VIEWS
      *    WHERE TABLE_SCHEMA = 'FLATER'
      *    AND TABLE_NAME = 'WCOV';
             CALL "SUB13" USING SQLCODE SQLSTATE copt iupt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "copt should be 'CASCADED'; its value is '", copt,
             "'"
             if (copt  NOT  =   "CASCADED") then
               MOVE 0 TO flag
             END-IF
             DISPLAY "iupt should be 'YES'; its value is '", iupt, "'"
             if (iupt  NOT  =   "YES") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT CHECK_OPTION, IS_UPDATABLE"
             DISPLAY "INTO :copt, :iupt"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS"
             DISPLAY "WHERE TABLE_SCHEMA = 'FLATER'"
             DISPLAY "AND TABLE_NAME = 'VS1';"

             MOVE "xxxxxxxx" TO copt
             MOVE "xxx" TO iupt
      *  EXEC SQL SELECT CHECK_OPTION, IS_UPDATABLE
      *    INTO :copt, :iupt
      *    FROM INFORMATION_SCHEMA.VIEWS
      *    WHERE TABLE_SCHEMA = 'FLATER'
      *    AND TABLE_NAME = 'VS1';
             CALL "SUB14" USING SQLCODE SQLSTATE copt iupt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "copt should be 'NONE'; its value is '", copt, "'"
             if (copt  NOT  =   "NONE") then
               MOVE 0 TO flag
             END-IF
             DISPLAY "iupt should be 'YES'; its value is '", iupt, "'"
             if (iupt  NOT  =   "YES") then
               MOVE 0 TO flag
             END-IF

      *For explanation of why VS2 through VS6 are not updatable, see
      *7.9 <query specification> SR 12d.  BASE_VS1 is a leaf
      *generally underlying table of the <query specification> and a
      *generally underlying table of the <query expression> contained
      *in the <where clause> of each view.  At least, I think so....

             DISPLAY "SELECT CHECK_OPTION, IS_UPDATABLE"
             DISPLAY "INTO :copt, :iupt"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS"
             DISPLAY "WHERE TABLE_SCHEMA = 'FLATER'"
             DISPLAY "AND TABLE_NAME = 'VS2';"

             MOVE "xxxxxxxx" TO copt
             MOVE "xxx" TO iupt
      *  EXEC SQL SELECT CHECK_OPTION, IS_UPDATABLE
      *    INTO :copt, :iupt
      *    FROM INFORMATION_SCHEMA.VIEWS
      *    WHERE TABLE_SCHEMA = 'FLATER'
      *    AND TABLE_NAME = 'VS2';
             CALL "SUB15" USING SQLCODE SQLSTATE copt iupt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "copt should be 'NONE'; its value is '", copt, "'"
             if (copt  NOT  =   "NONE") then
               MOVE 0 TO flag
             END-IF
             DISPLAY "iupt should be 'NO'; its value is '", iupt, "'"
             if (iupt  NOT  =   "NO") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT CHECK_OPTION, IS_UPDATABLE"
             DISPLAY "INTO :copt, :iupt"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS"
             DISPLAY "WHERE TABLE_SCHEMA = 'FLATER'"
             DISPLAY "AND TABLE_NAME = 'VS3';"

             MOVE "xxxxxxxx" TO copt
             MOVE "xxx" TO iupt
      *  EXEC SQL SELECT CHECK_OPTION, IS_UPDATABLE
      *    INTO :copt, :iupt
      *    FROM INFORMATION_SCHEMA.VIEWS
      *    WHERE TABLE_SCHEMA = 'FLATER'
      *    AND TABLE_NAME = 'VS3';
             CALL "SUB16" USING SQLCODE SQLSTATE copt iupt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "copt should be 'NONE'; its value is '", copt, "'"
             if (copt  NOT  =   "NONE") then
               MOVE 0 TO flag
             END-IF
             DISPLAY "iupt should be 'NO'; its value is '", iupt, "'"
             if (iupt  NOT  =   "NO") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT CHECK_OPTION, IS_UPDATABLE"
             DISPLAY "INTO :copt, :iupt"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS"
             DISPLAY "WHERE TABLE_SCHEMA = 'FLATER'"
             DISPLAY "AND TABLE_NAME = 'VS4';"

             MOVE "xxxxxxxx" TO copt
             MOVE "xxx" TO iupt
      *  EXEC SQL SELECT CHECK_OPTION, IS_UPDATABLE
      *    INTO :copt, :iupt
      *    FROM INFORMATION_SCHEMA.VIEWS
      *    WHERE TABLE_SCHEMA = 'FLATER'
      *    AND TABLE_NAME = 'VS4';
             CALL "SUB17" USING SQLCODE SQLSTATE copt iupt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "copt should be 'NONE'; its value is '", copt, "'"
             if (copt  NOT  =   "NONE") then
               MOVE 0 TO flag
             END-IF
             DISPLAY "iupt should be 'NO'; its value is '", iupt, "'"
             if (iupt  NOT  =   "NO") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT CHECK_OPTION, IS_UPDATABLE"
             DISPLAY "INTO :copt, :iupt"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS"
             DISPLAY "WHERE TABLE_SCHEMA = 'FLATER'"
             DISPLAY "AND TABLE_NAME = 'VS5';"

             MOVE "xxxxxxxx" TO copt
             MOVE "xxx" TO iupt
      *  EXEC SQL SELECT CHECK_OPTION, IS_UPDATABLE
      *    INTO :copt, :iupt
      *    FROM INFORMATION_SCHEMA.VIEWS
      *    WHERE TABLE_SCHEMA = 'FLATER'
      *    AND TABLE_NAME = 'VS5';
             CALL "SUB18" USING SQLCODE SQLSTATE copt iupt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "copt should be 'NONE'; its value is '", copt, "'"
             if (copt  NOT  =   "NONE") then
               MOVE 0 TO flag
             END-IF
             DISPLAY "iupt should be 'NO'; its value is '", iupt, "'"
             if (iupt  NOT  =   "NO") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT CHECK_OPTION, IS_UPDATABLE"
             DISPLAY "INTO :copt, :iupt"
             DISPLAY "FROM INFORMATION_SCHEMA.VIEWS"
             DISPLAY "WHERE TABLE_SCHEMA = 'FLATER'"
             DISPLAY "AND TABLE_NAME = 'VS6';"

             MOVE "xxxxxxxx" TO copt
             MOVE "xxx" TO iupt
      *  EXEC SQL SELECT CHECK_OPTION, IS_UPDATABLE
      *    INTO :copt, :iupt
      *    FROM INFORMATION_SCHEMA.VIEWS
      *    WHERE TABLE_SCHEMA = 'FLATER'
      *    AND TABLE_NAME = 'VS6';
             CALL "SUB19" USING SQLCODE SQLSTATE copt iupt
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "copt should be 'NONE'; its value is '", copt, "'"
             if (copt  NOT  =   "NONE") then
               MOVE 0 TO flag
             END-IF
             DISPLAY "iupt should be 'NO'; its value is '", iupt, "'"
             if (iupt  NOT  =   "NO") then
               MOVE 0 TO flag
             END-IF

      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB20" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0569','pass','MCO');
               CALL "SUB21" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " isi002.mco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0569','fail','MCO');
               CALL "SUB22" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB23" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0569 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality98%

¤ Dauer der Verarbeitung: 0.22 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.