Quellcode-Bibliothek
© Kompilation durch diese Firma
[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]
Datei:
xts751.cob
Sprache: Unknown
IDENTIFICATION DIVISION.
PROGRAM-ID. XTS751.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "XTS751.SCO") calling SQL
* procedures in file "XTS751.MCO".
*Copyright 1995 National Computing Centre Limited
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* XTS751.SCO
* WRITTEN BY: Manolis Megaloikonomou
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This routine tests Name of violated column constraint
* returned in diagnostics.
*
*
* REFERENCES
* 18.1 -- <Get diagnostics statement>
* 18.1 LR.2a -- Raised. Entry SQL restriction which
* prohibited the use of
* a <get diagnostics statement>.
* 11.4 -- <column definition>
* 11.6 -- <table constraint definition>
* 11.7 -- <unique constraint definition>
* 11.8 -- <referential constraint definition>
* 11.9 -- <check constraint definition>
* F#12 -- Get diagnostics.
* F#30 -- Table operations.
* F#49 -- Constraint management.
*
* DATE LAST ALTERED 18/12/95 CTS5 Hand-over Test
*
* Cleanups and fixes by V. Kogakis 15/12/95
* Print timestamp
* Include Files
* Define NOSUBCLASS/CHCKOK at test beginning
*
* QA STATUS :
*
* Revised by DWF 1996-02-15
* Entire test horribly broken; major changes to everything.
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 rstate PIC X(5).
01 cntnam PIC X(8).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 i PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Module COBOL, xts751.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7051 *******************
MOVE 1 TO flag
DISPLAY " TEST7051 "
DISPLAY " Name of violated column constraint returned in
- " diagnostics."
DISPLAY "References:"
DISPLAY " 18.1 -- "
DISPLAY " 18.1 LR.2a -- Raised. Entry SQL restriction
- " which"
DISPLAY " prohibited the use of"
DISPLAY " a ."
DISPLAY " 11.4 -- "
DISPLAY " 11.6 -- "
DISPLAY " 11.7 -- "
DISPLAY " 11.8 -- "
DISPLAY " 11.9 -- "
DISPLAY " F#12 -- Get diagnostics."
DISPLAY " F#30 -- Table operations."
DISPLAY " F#49 -- Constraint management."
DISPLAY " - - - - - - - - - - - - - - - - - - -"
*Initialise error reporting variables
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "INSERT INTO CTS1.TEST12849A
- " VALUES(2,'JACK','TOKYO',2,'BLACK',2,3);"
* EXEC SQL INSERT INTO CTS1.TEST12849A
* VALUES(2,'JACK','TOKYO',2,'BLACK',2,3);
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Insert a row in table TEST12849A which attempts
*to insert a duplicate value in the column that was
*associated with the unique specification.
*Initialise host variables
MOVE "xxxxx" TO rstate
MOVE "xxxxxxxx" TO cntnam
DISPLAY "INSERT INTO CTS1.TEST12849A
- " VALUES(3,'JACK','TOKYO',3,'WHITE',3,2);"
* EXEC SQL INSERT INTO CTS1.TEST12849A
* VALUES(3,'JACK','TOKYO',3,'WHITE',3,2);
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY " "
DISPLAY "GET DIAGNOSTICS"
DISPLAY "EXCEPTION 1"
DISPLAY ":rstate = RETURNED_SQLSTATE,"
DISPLAY ":cntnam = CONSTRAINT_NAME;"
* EXEC SQL GET DIAGNOSTICS
* EXCEPTION 1
* :rstate = RETURNED_SQLSTATE,
* :cntnam = CONSTRAINT_NAME;
CALL "SUB5" USING SQLCODE SQLSTATE rstate cntnam
MOVE SQLCODE TO SQL-COD
MOVE rstate TO SQLSTATE
DISPLAY "RETURNED_SQLSTATE should be 23000; its value is ",
rstate
DISPLAY "CONSTRAINT_NAME should be CONSTR_2; its value is
- " ", cntnam
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "23000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
if (cntnam NOT = "CONSTR_2") then
MOVE 0 TO flag
END-IF
DISPLAY " "
*Initialise host variables
MOVE "xxxxx" TO rstate
MOVE "xxxxxxxx" TO cntnam
*Insert one more row in the table attempting to violate
*the foreign key constraint by inserting a non existing
*value for the referenced column.
DISPLAY "INSERT INTO CTS1.TEST12849A
- " VALUES(4,'KEVIN','DUBLIN',9,'RED',9,4);"
* EXEC SQL INSERT INTO CTS1.TEST12849A
* VALUES(4,'KEVIN','DUBLIN',9,'RED',9,4);
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY " "
DISPLAY "GET DIAGNOSTICS"
DISPLAY "EXCEPTION 1"
DISPLAY ":rstate = RETURNED_SQLSTATE,"
DISPLAY ":cntnam = CONSTRAINT_NAME;"
* EXEC SQL GET DIAGNOSTICS
* EXCEPTION 1
* :rstate = RETURNED_SQLSTATE,
* :cntnam = CONSTRAINT_NAME;
CALL "SUB7" USING SQLCODE SQLSTATE rstate cntnam
MOVE SQLCODE TO SQL-COD
MOVE rstate TO SQLSTATE
DISPLAY "RETURNED_SQLSTATE should be 23000; its value is ",
rstate
DISPLAY "CONSTRAINT_NAME should be CONSTR_1; its value is
- " ", cntnam
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "23000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
if (cntnam NOT = "CONSTR_1") then
MOVE 0 TO flag
END-IF
DISPLAY " "
*Initialise host variables
MOVE "xxxxx" TO rstate
MOVE "xxxxxxxx" TO cntnam
*Insert one more row in the table attempting to insert in
*the column associated with the other referential constraint
DISPLAY "INSERT INTO CTS1.TEST12849A
- " VALUES(5,'FOO','LONDON',5,'GREEN',2,5);"
* EXEC SQL INSERT INTO CTS1.TEST12849A
* VALUES(5,'FOO','LONDON',5,'GREEN',2,5);
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY " "
DISPLAY "GET DIAGNOSTICS"
DISPLAY "EXCEPTION 1"
DISPLAY ":rstate = RETURNED_SQLSTATE,"
DISPLAY ":cntnam = CONSTRAINT_NAME;"
* EXEC SQL GET DIAGNOSTICS
* EXCEPTION 1
* :rstate = RETURNED_SQLSTATE,
* :cntnam = CONSTRAINT_NAME;
CALL "SUB9" USING SQLCODE SQLSTATE rstate cntnam
MOVE SQLCODE TO SQL-COD
MOVE rstate TO SQLSTATE
DISPLAY "RETURNED_SQLSTATE should be 23000; its value is ",
rstate
DISPLAY "CONSTRAINT_NAME should be CONSTR_3; its value is
- " ", cntnam
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "23000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
if (cntnam NOT = "CONSTR_3") then
MOVE 0 TO flag
END-IF
DISPLAY " "
*undo the insertion of the rows
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " xts751.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7051','pass','MCO');
CALL "SUB11" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " xts751.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7051','fail','MCO');
CALL "SUB12" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "========================================"
* EXEC SQL COMMIT WORK;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7051 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
[ Dauer der Verarbeitung: 0.66 Sekunden
(vorverarbeitet)
]
|
|
