Quelle cdr031.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  CDR031.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * EMBEDDED COBOL (file "CDR031.PCO")

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1994/10/26 EMBEDDED COBOL LANGUAGE
      * NIST SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * CDR031.PCO
      * WRITTEN BY: David Flater
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
      *
      * This routine tests FIPS sizing.
      *
      * REFERENCES
      *   ANSI SQL-1992
      *
      ****************************************************************

           EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  vtr119 PIC  X(118).
             EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "FLATER " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
             EXEC SQL SELECT USER INTO :uidx FROM SUN.ECCO END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid " expected. User ", uidx "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Embedded COBOL, cdr031.pco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST0526 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0526 "
             DISPLAY "FIPS sizing: Length of FOREIGN KEY column list =
      -    " 120"
             DISPLAY "References:"
             DISPLAY " FIPS 16.6 #.35 -- Sizing for database
      -    " constructs"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *This syntax is copied from dml044, if it worked there it should
123456*89012345678901234567890123456789012345678901234567890123456789012
                MOVE "This test is trying to test the limit on the total
      -       " length of a foreign key column list, which is supposed t
      -       "o be 120..." TO vtr119
             DISPLAY " vtr119 = ", vtr119

             DISPLAY "INSERT INTO SUN.T6118REF VALUES"
             DISPLAY " ('AAAAAAAAAAAAAAAAAAAA',
      -    " 'BBBBBBBBBBBBBBBBBBBB',"
             DISPLAY " 'CCCCCCCCCCCCCCCCCCCC',
      -    " 'DDDDDDDDDDDDDDDDDDDD',"
             DISPLAY " 'EEEEEEEEEEEEEEEEEEEEEEE', 9999, :vtr119);"
             EXEC SQL INSERT INTO SUN.T6118REF VALUES
               ('AAAAAAAAAAAAAAAAAAAA', 'BBBBBBBBBBBBBBBBBBBB',
               'CCCCCCCCCCCCCCCCCCCC', 'DDDDDDDDDDDDDDDDDDDD',
               'EEEEEEEEEEEEEEEEEEEEEEE', 9999, :vtr119) END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO SUN.T6 VALUES"
             DISPLAY " ('AAAAAAAAAAAAAAAAAAAA',
      -    " 'BBBBBBBBBBBBBBBBBBBB',"
             DISPLAY " 'CCCCCCCCCCCCCCCCCCCC',
      -    " 'DDDDDDDDDDDDDDDDDDDD',"
             DISPLAY " 'EEEEEEEEEEEEEEEEEEEEEEE', 9999);"
             EXEC SQL INSERT INTO SUN.T6 VALUES
               ('AAAAAAAAAAAAAAAAAAAA', 'BBBBBBBBBBBBBBBBBBBB',
               'CCCCCCCCCCCCCCCCCCCC', 'DDDDDDDDDDDDDDDDDDDD',
               'EEEEEEEEEEEEEEEEEEEEEEE', 9999) END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO SUN.T118 VALUES (:vtr119);"
             EXEC SQL INSERT INTO SUN.T118 VALUES (:vtr119) END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *The following should fail.

             DISPLAY "INSERT INTO SUN.T6 VALUES"
             DISPLAY " ('AAAAAAAAAAAAAAAAAAAA',
      -    " 'BBBBBBBBBBBBBBBBBBBB',"
             DISPLAY " 'CCCCCCCCCCCCCCCCCCCC',
      -    " 'DDDDDDDDDDDDDDDDDDDD',"
             DISPLAY " 'EEEEEEEEEEEEEEEEEEEEEEE', 0);"
             EXEC SQL INSERT INTO SUN.T6 VALUES
               ('AAAAAAAAAAAAAAAAAAAA', 'BBBBBBBBBBBBBBBBBBBB',
               'CCCCCCCCCCCCCCCCCCCC', 'DDDDDDDDDDDDDDDDDDDD',
               'EEEEEEEEEEEEEEEEEEEEEEE', 0) END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             if (SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (NORMSQ  NOT  =   "23000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "23000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "INSERT INTO SUN.T118 VALUES ('Hamlet');"
             EXEC SQL INSERT INTO SUN.T118 VALUES ('Hamlet') END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             if (SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (NORMSQ  NOT  =   "23000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "23000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if (flag  =  1) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO SUN.TESTREPORT
                 VALUES('0526','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " cdr031.pco *** fail *** "
               EXEC SQL INSERT INTO SUN.TESTREPORT
                 VALUES('0526','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "================================================"

      ******************** END TEST0526 ********************
      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality98%

¤ Dauer der Verarbeitung: 0.15 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.