products/Sources/formale Sprachen/Cobol/Test-Suite/SQL P/dml1-99/  image not shown  

Quellcode-Bibliothek

© Kompilation durch diese Firma

[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]

Datei: dml001.cob   Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  DML001.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.


      * EMBEDDED COBOL (file "DML001.PCO")  

      ****************************************************************
      *                                                              
      *                 COMMENT SECTION                              
      *                                                              
      * DATE 1987/08/21 EMBEDDED COBOL LANGUAGE                          
      * NIST SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:                                                  
      *  This program was written by employees of NIST to test SQL    
      *  implementations for conformance to the SQL standards.        
      *  NIST assumes no responsibility for any party's use of        
      *  this program.
      *                                                              
      * DML001.PCO                                                    
      * WRITTEN BY: HU YANPING                                       
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
      *                                                              
      *   THIS ROUTINE TESTS THE DECLARE CURSOR STATEMENT IN THE     
      * LANGUGE OF SQL. THE FORMAT:                                  
      *           DECLARE <cursor name> CURSOR                       
      *           FOR     <cursor specification>                     
      *                                                              
      * REFERENCES                                                   
      *         AMERICAN NATIONAL STANDARD database language - SQL   
      *                     X3.135-1989                              
      *                                                              
      *              SECTION 8.3 <declare cursor>                    
      *                                                              
      ****************************************************************


           EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  PNO1 PIC  X(3).
       01  EMPNM1 PIC  X(20).
       01  EMPNO PIC  X(3).
       01  HOUR1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  iii PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  uid PIC X(18).
       01  uidx PIC X(18).
           EXEC SQL END DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  i PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ii PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.


      * date_time declaration *
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
    
       PROCEDURE DIVISION.
       P0.


           MOVE "HU" TO uid
           CALL "AUTHID" USING uid
           MOVE "not logged in, not" TO uidx
           EXEC SQL SELECT 
                 USER INTO :uidx FROM HU.ECCO END-EXEC
           if (uid NOT = uidx) then
             DISPLAY "ERROR: User " uid " expected."
             DISPLAY "User " uidx " connected."
             DISPLAY " "
             STOP RUN
           END-IF

           MOVE 0 TO errcnt
           DISPLAY
           "SQL Test Suite, V6.0, Embedded COBOL, dml001.pco"
           DISPLAY " "
           DISPLAY
           "59-byte ID"
           DISPLAY "TEd Version #"
           DISPLAY " "
      * date_time print *
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME


      ******************** BEGIN TEST0001 *******************

           MOVE 0 TO i

           DISPLAY " TEST0001 "
           DISPLAY "declare with ORDER BY < column specification > DESC
      -    " "
           DISPLAY "reference X3.135-1989 section 8.3 General Rules 3)
      -    " b)"
           DISPLAY " - - - - - - - - - - - - - - - - - - -"
           DISPLAY " *** FOR SELECT EMPNUM,HOURS "
           DISPLAY " *** FROM WORKS "
           DISPLAY " *** WHERE PNUM='P2' "
           DISPLAY " *** ORDER BY EMPNUM DESC "
           DISPLAY  " "

           EXEC SQL DECLARE X CURSOR
             FOR SELECT EMPNUM,HOURS
             FROM   WORKS
             WHERE  PNUM='P2'
             ORDER  BY EMPNUM DESC END-EXEC
           EXEC SQL OPEN X END-EXEC
           MOVE SQLCODE TO SQL-COD

           MOVE 1 TO ii
           PERFORM P50 UNTIL ii > 14
           DISPLAY " EMPNO=", EMPNO ", i=", i " "
           DISPLAY "The answer should be EMPNO=E1, i=4 & "
           DISPLAY " order by EMPNO DESC. "

           if (EMPNO   =   "E1"  AND  i  =  4) then
             DISPLAY " *** pass ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0001','pass','PCO') END-EXEC
             MOVE SQLCODE TO SQL-COD
           else
             DISPLAY " dml001.pco *** fail ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0001','fail','PCO') END-EXEC
             ADD 1 TO errcnt
             MOVE SQLCODE TO SQL-COD
           END-IF
           DISPLAY  " "
           EXEC SQL COMMIT WORK END-EXEC
           MOVE SQLCODE TO SQL-COD

      ******************** END TEST0001 *******************
      ******************** BEGIN TEST0002 *******************

           MOVE 0 TO i

           DISPLAY " TEST0002 "
           DISPLAY "declare with ORDER BY < unsigned integer > ASC "
           DISPLAY "reference X3.135-1989 section 8.3 General Rules 3)
      -    " b)"
           DISPLAY " - - - - - - - - - - - - - - - - - - -"
           DISPLAY " *** FOR SELECT EMPNUM,HOURS "
           DISPLAY " *** FROM WORKS "
           DISPLAY " *** WHERE PNUM='P2' "
           DISPLAY " *** ORDER BY 2 ASC "
           DISPLAY  " "

           EXEC SQL DECLARE Y CURSOR
             FOR SELECT EMPNUM,HOURS
             FROM   WORKS
             WHERE  PNUM='P2'
             ORDER  BY 2 ASC END-EXEC
           EXEC SQL OPEN Y END-EXEC
           MOVE SQLCODE TO SQL-COD

           MOVE 1 TO ii
           PERFORM P49 UNTIL ii > 14

           DISPLAY " i=", i " "
           DISPLAY "The answer should be i = 4 & "
           DISPLAY " order by HOUR1 ASC. "
           if (i  =  4  AND  HOUR1  =  80) then
             DISPLAY " *** pass ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0002','pass','PCO') END-EXEC
             MOVE SQLCODE TO SQL-COD
           else
             DISPLAY " dml001.pco *** fail ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0002','fail','PCO') END-EXEC
             ADD 1 TO errcnt
             MOVE SQLCODE TO SQL-COD
           END-IF
           DISPLAY  " "
           EXEC SQL COMMIT WORK END-EXEC
           MOVE SQLCODE TO SQL-COD

      ******************** END TEST0002 *******************
      ******************** BEGIN TEST0003 *******************

           MOVE 0 TO i


           DISPLAY " TEST0003 "
           DISPLAY "declare with ORDER BY < sort specification > ... "
           DISPLAY "reference X3.135-1989 section 8.3 General Rules 3)
      -    " b)"
           DISPLAY " - - - - - - - - - - - - - - - - - - -"

           DISPLAY " *** FOR SELECT EMPNUM,HOURS "
           DISPLAY " *** FROM WORKS "
           DISPLAY " *** WHERE PNUM='P2' "
           DISPLAY " *** ORDER BY 2 DESC,EMPNUM DESC "
           DISPLAY  " "

           EXEC SQL DECLARE Z CURSOR
             FOR SELECT EMPNUM,HOURS
             FROM   WORKS
             WHERE  PNUM='P2'
             ORDER  BY 2 DESC,EMPNUM DESC END-EXEC
           EXEC SQL OPEN Z END-EXEC
           MOVE SQLCODE TO SQL-COD

           MOVE 1 TO ii
           PERFORM P48 UNTIL ii > 14

           DISPLAY "The answer should be i = 4; i = ", i " & "
           DISPLAY " order by HOUR1 DESC, EMPNO DESC."
           if (i  =  4  AND  EMPNO   =   "E1") then
             DISPLAY " *** pass ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0003','pass','PCO') END-EXEC
             MOVE SQLCODE TO SQL-COD
           else
             DISPLAY " dml001.pco *** fail ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0003','fail','PCO') END-EXEC
             ADD 1 TO errcnt
             MOVE SQLCODE TO SQL-COD
           END-IF
           DISPLAY  " "
           EXEC SQL COMMIT WORK END-EXEC
           MOVE SQLCODE TO SQL-COD

      ******************** END TEST0003 *******************
      ******************** BEGIN TEST0004 *******************

           MOVE 0 TO i
           DISPLAY " TEST0004 "
           DISPLAY " declare with UNION "
           DISPLAY "reference X3.135-1989 section 8.3 General Rules 2)"
           DISPLAY " - - - - - - - - - - - - - - - - - - -"
           DISPLAY " *** FOR SELECT WORKS.EMPNUM "
           DISPLAY " *** FROM WORKS "
           DISPLAY " *** WHERE WORKS.PNUM='P2' "
           DISPLAY " *** UNION "
           DISPLAY " *** SELECT STAFF.EMPNUM "
           DISPLAY " *** FROM STAFF "
           DISPLAY " *** WHERE STAFF.GRADE=13 "
           DISPLAY " *** ORDER BY 1 DESC "
           DISPLAY  " "

           EXEC SQL DECLARE A CURSOR
             FOR SELECT WORKS.EMPNUM 
             FROM   WORKS
             WHERE  WORKS.PNUM='P2'
             UNION
             SELECT STAFF.EMPNUM  
             FROM   STAFF
             WHERE  STAFF.GRADE=13 
             ORDER BY 1 DESC END-EXEC
           EXEC SQL OPEN A END-EXEC
           MOVE SQLCODE TO SQL-COD

           MOVE 1 TO ii
           PERFORM P47 UNTIL ii > 14

           DISPLAY " i = ", i
           DISPLAY "The answer should be i = 5 & ORDER BY EMPNO DESC."
           if (i  =  5  AND  EMPNO   =   "E1") then
             DISPLAY " *** pass ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0004','pass','PCO') END-EXEC
             MOVE SQLCODE TO SQL-COD
           else
             DISPLAY " dml001.pco *** fail ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0004','fail','PCO') END-EXEC
             ADD 1 TO errcnt
             MOVE SQLCODE TO SQL-COD
           END-IF
           DISPLAY  " "
           EXEC SQL COMMIT WORK END-EXEC
           MOVE SQLCODE TO SQL-COD

      ******************** END TEST0004 *******************
      ******************** BEGIN TEST0005 *******************

           MOVE 0 TO i

           DISPLAY " TEST0005 "
           DISPLAY " declare with UNION ALL "
           DISPLAY "reference X3.135-1989 section 8.3 General Rules 2)"
           DISPLAY " - - - - - - - - - - - - - - - - - - -"
           DISPLAY " *** FOR SELECT WORKS.EMPNUM "
           DISPLAY " *** FROM WORKS "
           DISPLAY " *** WHERE WORKS.PNUM='P2' "
           DISPLAY " *** UNION ALL "
           DISPLAY " *** SELECT STAFF.EMPNUM "
           DISPLAY " *** FROM STAFF "
           DISPLAY " *** WHERE STAFF.GRADE=13 "
           DISPLAY  " "

           EXEC SQL DECLARE B CURSOR
             FOR SELECT WORKS.EMPNUM 
             FROM   WORKS
             WHERE  WORKS.PNUM='P2'
             UNION ALL    
             SELECT STAFF.EMPNUM  
             FROM   STAFF
             WHERE  STAFF.GRADE=13 END-EXEC
           EXEC SQL OPEN B END-EXEC
           MOVE SQLCODE TO SQL-COD

           MOVE 1 TO ii
           PERFORM P46 UNTIL ii > 14

           DISPLAY " The correct answer should be i=6,i=", i " &"
           DISPLAY "The correct answer should have some duplicate rows."
           if (i  =  6) then
             DISPLAY " *** pass ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0005','pass','PCO') END-EXEC
             MOVE SQLCODE TO SQL-COD
           else
             DISPLAY " dml001.pco *** fail ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0005','fail','PCO') END-EXEC
             ADD 1 TO errcnt
             MOVE SQLCODE TO SQL-COD
           END-IF
           DISPLAY  " "
           EXEC SQL COMMIT WORK END-EXEC
           MOVE SQLCODE TO SQL-COD

      ******************** END TEST0005 *******************
      ******************** BEGIN TEST0158 *******************

           MOVE 0 TO i

           DISPLAY " TEST0158 "
           DISPLAY " declare with UNION "
           DISPLAY "reference X3.135-1989 section 8.3 General Rules 2)"
           DISPLAY " - - - - - - - - - - - - - - - - - - -"
           DISPLAY " *** SELECT EMPNAME,PNUM,HOURS "
           DISPLAY " *** FROM STAFF,WORKS "
           DISPLAY " *** WHERE STAFF.EMPNUM = WORKS.EMPNUM "
           DISPLAY " *** UNION "
           DISPLAY " *** SELECT EMPNAME,PNUM,HOURS "
           DISPLAY " *** FROM STAFF,WORKS "
           DISPLAY " *** WHERE NOT EXISTS "
           DISPLAY " *** (SELECT HOURS "
           DISPLAY " *** FROM WORKS "
           DISPLAY " *** WHERE STAFF.EMPNUM = WORKS.EMPNUM)"
           DISPLAY  " "

           EXEC SQL DECLARE CC CURSOR
             FOR SELECT EMPNAME,PNUM,HOURS
             FROM   STAFF,WORKS
             WHERE  STAFF.EMPNUM = WORKS.EMPNUM
             UNION
             SELECT EMPNAME,PNUM,HOURS
             FROM   STAFF,WORKS
             WHERE  NOT EXISTS
             (SELECT HOURS 
             FROM   WORKS
             WHERE  STAFF.EMPNUM = WORKS.EMPNUM) END-EXEC
           EXEC SQL OPEN CC END-EXEC
           MOVE SQLCODE TO SQL-COD

           MOVE 1 TO ii
           PERFORM P45 UNTIL ii > 29

           DISPLAY " The correct answer should be i=21; i=", i
           if (i  =  21) then
             DISPLAY " *** pass ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0158','pass','PCO') END-EXEC
             MOVE SQLCODE TO SQL-COD
           else
             DISPLAY " dml001.pco *** fail ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0158','fail','PCO') END-EXEC
             ADD 1 TO errcnt
             MOVE SQLCODE TO SQL-COD
           END-IF
           DISPLAY  " "
           EXEC SQL COMMIT WORK END-EXEC
           MOVE SQLCODE TO SQL-COD

      ******************** END TEST0158 *******************
      ******************** BEGIN TEST0159 *******************

           MOVE 0 TO i

           DISPLAY " TEST0159 "
           DISPLAY " declare with UNION "
           DISPLAY "reference X3.135-1989 section 8.3 General Rules 2)"
           DISPLAY " - - - - - - - - - - - - - - - - - - -"
           DISPLAY " *** FOR SELECT PNUM,EMPNUM,HOURS "
           DISPLAY " *** FROM WORKS "
           DISPLAY " *** WHERE HOURS=80 "
           DISPLAY " *** UNION "
           DISPLAY " *** SELECT PNUM,EMPNUM,HOURS "
           DISPLAY " *** FROM WORKS "
           DISPLAY " *** WHERE HOURS=40 "
           DISPLAY " *** UNION "
           DISPLAY " *** SELECT PNUM, EMPNUM, HOURS "
           DISPLAY " *** FROM WORKS "
           DISPLAY " *** WHERE HOURS=20 "
           DISPLAY " *** ORDER BY 3,1 "

           EXEC SQL DECLARE D CURSOR
             FOR SELECT PNUM,EMPNUM,HOURS
             FROM WORKS
             WHERE HOURS=80
             UNION
             SELECT PNUM,EMPNUM,HOURS
             FROM WORKS
             WHERE HOURS=40
             UNION
             SELECT PNUM,EMPNUM,HOURS
             FROM WORKS
             WHERE HOURS=20
             ORDER BY 3,1 END-EXEC
           EXEC SQL OPEN D END-EXEC
           MOVE SQLCODE TO SQL-COD

           MOVE 1 TO ii
           PERFORM P44 UNTIL ii > 39

           DISPLAY " The correct answer should be i=10,i=", i " "
           if (i  =  10) then
             DISPLAY " *** pass ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0159','pass','PCO') END-EXEC
             MOVE SQLCODE TO SQL-COD
           else
             DISPLAY " dml001.pco *** fail ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0159','fail','PCO') END-EXEC
             ADD 1 TO errcnt
             MOVE SQLCODE TO SQL-COD
           END-IF
           DISPLAY  " "

           EXEC SQL COMMIT WORK END-EXEC
           MOVE SQLCODE TO SQL-COD

      ******************** END TEST0159 *******************
      ******************** BEGIN TEST0160 *******************

           MOVE 0 TO i

           DISPLAY " TEST0160 "
           DISPLAY " declare with UNION "
           DISPLAY "reference X3.135-1989 section 8.3 General Rules 2)"
           DISPLAY " - - - - - - - - - - - - - - - - - - -"
           DISPLAY " *** FOR (SELECT PNUM,EMPNUM,HOURS "
           DISPLAY " *** FROM WORKS "
           DISPLAY " *** UNION "
           DISPLAY " *** SELECT PNUM,EMPNUM,HOURS "
           DISPLAY " *** FROM WORKS "
           DISPLAY " *** WHERE HOURS=80) "
           DISPLAY " *** UNION ALL "
           DISPLAY " *** SELECT PNUM,EMPNUM,HOURS "
           DISPLAY " *** FROM WORKS "
           DISPLAY " *** WHERE HOURS=12 "
           DISPLAY " *** ORDER BY 2,1 "

           EXEC SQL DECLARE E CURSOR
             FOR (SELECT PNUM,EMPNUM,HOURS
             FROM WORKS
             UNION
             SELECT PNUM,EMPNUM,HOURS
             FROM WORKS
             WHERE HOURS=80)
             UNION ALL 
             SELECT PNUM,EMPNUM,HOURS
             FROM WORKS
             WHERE HOURS=12
             ORDER BY 2,1 END-EXEC

           EXEC SQL OPEN E END-EXEC
           MOVE SQLCODE TO SQL-COD

           MOVE 1 TO ii
           PERFORM P43 UNTIL ii > 39

           DISPLAY " The correct answer should be i=14; i=", i " "
           if (i  =  14) then
             DISPLAY " *** pass ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0160','pass','PCO') END-EXEC
             MOVE SQLCODE TO SQL-COD
           else
             DISPLAY " dml001.pco *** fail ***"
             DISPLAY
             "====================================================="
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0160','fail','PCO') END-EXEC
             ADD 1 TO errcnt
             MOVE SQLCODE TO SQL-COD
           END-IF

           DISPLAY  " "
           EXEC SQL COMMIT WORK END-EXEC
           MOVE SQLCODE TO SQL-COD

      ******************** END TEST0160 *******************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

        P50.
             EXEC SQL FETCH X INTO :EMPNO,:HOUR1 END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  =  0) then
               MOVE ii TO i
               DISPLAY " EMPNO=", EMPNO " and HOUR1=", HOUR1 "
      -    " "
             END-IF
           ADD 1 TO ii
           .

        P49.
             EXEC SQL FETCH Y INTO :EMPNO,:HOUR1 END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  =  0) then
               MOVE ii TO i
               DISPLAY " EMPNO=", EMPNO " and HOUR1=", HOUR1 " "
             END-IF
           ADD 1 TO ii
           .

        P48.
             EXEC SQL FETCH Z INTO :EMPNO,:HOUR1 END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  =  0) then
               MOVE ii TO i
               DISPLAY " EMPNO=", EMPNO " and HOUR1=", HOUR1 "
      -    " "
             END-IF
           ADD 1 TO ii
           .

        P47.
             EXEC SQL FETCH A INTO :EMPNO END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  =  0) then
               MOVE ii TO i
               DISPLAY " EMPNO=", EMPNO " "
             END-IF
           ADD 1 TO ii
           .

        P46.
             EXEC SQL FETCH B INTO :EMPNO END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  =  0) then
               MOVE ii TO i
               DISPLAY "EMPNO=", EMPNO " UNION ALL from WORKS and STAFF
      -    " "
             END-IF
           ADD 1 TO ii
           .

        P45.
             EXEC SQL FETCH CC INTO :EMPNM1,:PNO1,:HOUR1 END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  =  0) then
               MOVE ii TO i
               DISPLAY "empname=", EMPNM1 ";pnum=", PNO1 ",hours=",
             HOUR1
             END-IF
           ADD 1 TO ii
           .

        P44.
             EXEC SQL FETCH D INTO :PNO1,:EMPNO,:HOUR1 END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  =  0) then
               MOVE ii TO i
               DISPLAY "pnum=", PNO1 "; empnum=", EMPNO "; hours=",
             HOUR1
             END-IF
           ADD 1 TO ii
           .

        P43.
             EXEC SQL FETCH E INTO :PNO1,:EMPNO,:HOUR1 END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  =  0) then
               MOVE ii TO i
               DISPLAY " pnum=", PNO1 "; empnum=", EMPNO "; hours=",
             HOUR1
             END-IF
           ADD 1 TO ii
           .

¤ Dauer der Verarbeitung: 0.26 Sekunden  (vorverarbeitet)  ¤



Download des
Quellennavigators
Download des
sprechenden Kalenders

in der Quellcodebibliothek suchen




Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.


Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.


Bot Zugriff