Quelle dml172.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  DML172.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * EMBEDDED COBOL (file "DML172.PCO")

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1996-05-13 EMBEDDED COBOL LANGUAGE
      * SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * DML172.PCO
      * WRITTEN BY:  David Flater
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
      *
      * This routine tests Intermediate SQL.
      *
      * REFERENCES
      *   FIPS PUB 127-2 14.2 Intermediate SQL
      *   ANSI SQL-1992
      *
      ****************************************************************

           EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  hlc1 CHARACTER SET ASCII_FULL PIC X(4).
             EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "FLATER " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
             EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Embedded COBOL, dml172.pco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST0884 *******************
             MOVE 1 TO flag

             DISPLAY " FIPS TEST0884"
             DISPLAY "ASCII_FULL and SQL_TEXT in column definition"
             DISPLAY "References:"
             DISPLAY " F#46 -- Named character sets"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             DISPLAY "CREATE TABLE T0884 ("
             DISPLAY " C1 CHAR (4) CHARACTER SET ASCII_FULL,"
             DISPLAY " C2 CHAR (4) CHARACTER SET SQL_TEXT);"
             EXEC SQL CREATE TABLE T0884 (
               C1 CHAR (4) CHARACTER SET ASCII_FULL,
               C2 CHAR (4) CHARACTER SET SQL_TEXT) END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             MOVE "^#|~" TO hlc1

             DISPLAY "hlc1 = ", hlc1
             DISPLAY "INSERT INTO T0884 VALUES (:hlc1,"
             DISPLAY " _SQL_TEXT 'This');"
             EXEC SQL INSERT INTO T0884 VALUES (:hlc1,
               _SQL_TEXT 'This') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             MOVE 99 TO int1
             DISPLAY "SELECT COUNT(*) INTO :int1"
             DISPLAY " FROM T0884"
             DISPLAY " WHERE C1 = _ASCII_FULL '^#|~'"
             DISPLAY " AND C2 = _SQL_TEXT 'This';"
             EXEC SQL SELECT COUNT(*) INTO :int1
               FROM T0884
               WHERE C1 = _ASCII_FULL '^#|~'
               AND C2 = _SQL_TEXT 'This' END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 1; its value is ", int1
             if (int1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DROP TABLE T0884 CASCADE;"
             EXEC SQL DROP TABLE T0884 CASCADE END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0884','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml172.pco *** fail *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0884','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0884 ********************
      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality98%

¤ Dauer der Verarbeitung: 0.13 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.