Quelle  xts702.cob   Sprache: unbekannt

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  XTS702.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.


      * Standard COBOL (file "XTS702.SCO") calling SQL
      * procedures in file "XTS702.MCO".
 

      *Copyright 1995 National Computing Centre Limited               
      *and Computer Logic R&D S.A                                     
      *on behalf of the CTS5 SQL2 Project.                            
      *All rights reserved.                                          
      *The CTS5 SQL2 Project is sponsored by the European Community. 
      *                                                             
      *The National Computing Centre Limited and Computer Logic R&D  
      *have given permission to NIST to distribute this program      
      *over the World Wide Web in order to promote SQL standards.    
      *DISCLAIMER:                                                   
      *This program was reviewed by employees of NIST for            
      *conformance to the SQL standards.                             
      *NIST assumes no responsibility for any party's use of         
      *this program.                                                 


      ****************************************************************
      *                                                              
      *                 COMMENT SECTION                              
      *                                                              
      * SQL VALIDATION TEST SUITE V6.0                               
      *                                                              
      * XTS702.SCO                                                   
      * WRITTEN BY : Manolis Megaloikonomou                         
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      * REVIEWED BY : Nickos  Backalidis                             
      *                                                              
      * This program tests :                                         
      *              a) LIKE with unrestricted <match value>         
      *              b) LIKE with general character value for        
      *                 pattern and escape                           
      *              c) LIKE with zero-length escape                 
      *                                                              
      *---------------------------------------------------------------
      *                           TEST7007                           
      *                                                              
      *              LIKE with unrestricted <match value>            
      *          References                                          
      *              8.5 FT.2    <match value> format                
      *              8.5 SR.1                                        
      *              8.5 GR.3                                        
      *              8.5 LR.2.a  Raising the rule that the match     
      *                          value shall be a <column reference> 
      *              6.13 FT.5   <character primary>                 
      *              6.11 FT.2   <value expression primary>          
      *              6.2  FT.2   <unsigned value specification>      
      *              F#28        LIKE enhancements                   
      *                                                              
      *---------------------------------------------------------------
      *                         TEST7008                             
      *                                                              
      *              LIKE with general char. value for pattern &     
      *      escape                                          
      *          References:                                         
      *              8.5 FT.3    <pattern> format                    
      *              8.5 FT.4    <escape character>                  
      *              8.5 LR.2.b  Raising the rule that the pattern   
      *                          shall be a <value specification>    
      *              8.5 LR.2.c  Raising the rule that the escape    
      *                          character shall be a <value         
      *                          specification>                      
      *              F#28        LIKE enhancements                   
      *                                                              
      *---------------------------------------------------------------
      *                            TEST7009                          
      *                                                              
      *              LIKE with zero-length escape                    
      *          References                                          
      *              8.5 FT.4    <escape character> format           
      *              8.5 GR.3.a.i The length of the string in        
      *                          <escape character> should be 1      
      *              8.5 LR.2.c  Raising the rule that the escape    
      *                          character shall be a <value         
      *                          specification>                 
      *              6.7 FT.7    <trim function>                     
      *              F#28        LIKE enhancements                   
      *              F#7         TRIM support is required            
      *                                                              
      *---------------------------------------------------------------
      *                                                              
      * DATE LAST ALTERED  14/12/95 CTS5 Hand-over Test              
      *                                                              
      * Cleanups and fixes by V. Kogakis 01/12/95:                   
      *      Initialize ALPNUM                                       
      *      Respect length of strings                               
      *      Tide up printouts                                       
      *      Modify values inserted in STAFF (test7008)              
      *      Modify tests according to test specifications           
      *                                                              
      * QA Status: QA check                                          
      *                                                              
      *Revised by DWF 1/19/96                                        
      *    Fixed exceptions                                          
      *    Fixed printout                                            
      *    Fixed check for wrong SQLCODE                             
      ****************************************************************



      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  hv2 PIC  X(24).
       01  coun PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration 
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "CTS1              " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB2" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected.  User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY "SQL Test Suite, V6.0, Module COBOL, xts702.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST7007 *******************

             MOVE 1 TO flag
             DISPLAY "                  TEST7007 "
             DISPLAY "    LIKE with unrestricted <match value>"
             DISPLAY "References:"
             DISPLAY "    8.5 FT.2   <match value> format"
             DISPLAY "    8.5 SR.1"
             DISPLAY "    8.5 GR.3"
             DISPLAY "    8.5 LR.2.a Raising the rule that the match
      -    " value"
             DISPLAY "               shall be a <column reference>"
             DISPLAY "    6.13 FT.5  <character primary>"
             DISPLAY "    6.11 FT.2  <value expression primary>"
             DISPLAY "    6.2  FT.2  <unsigned value specification>"
             DISPLAY "    F#28       LIKE enhancements"
             DISPLAY "   - - - - - - - - - - - - - - - - - - -"

      *execute a series of select statements which include 
      *a like predicate                                    
      *match values should be of types : character literal 
      *                     character string host variable 
      *                                               USER 

      *Initialise error reporting variables 
             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *Subtest 1 
             MOVE 99 TO coun
             DISPLAY "SELECT COUNT(*) INTO :coun FROM STAFF"
             DISPLAY "WHERE 'Alice' LIKE 'Alice';"
      *  EXEC SQL SELECT COUNT(*)
      *    INTO   :coun
      *    FROM   STAFF
      *    WHERE  'Alice' LIKE 'Alice';
             CALL "SUB3" USING SQLCODE SQLSTATE coun
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "coun should be 5; its value is ", coun
             if (coun  NOT =  5) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

      *Subtest 2 
             MOVE "Equal_literal" TO hv2
             DISPLAY "hv2 = '", hv2, "'"
             MOVE 99 TO coun
             DISPLAY "SELECT COUNT(*) INTO :coun FROM STAFF"
             DISPLAY "WHERE :hv2 NOT LIKE 'Eq_alS_literal%' ESCAPE 'S';"
      *  EXEC SQL SELECT COUNT(*)
      *    INTO   :coun
      *    FROM   STAFF
      *    WHERE  :hv2 NOT LIKE 'Eq_alS_literal%' ESCAPE 'S'
      * ;
             CALL "SUB4" USING SQLCODE SQLSTATE coun hv2
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "coun should be 0; its value is ", coun
             if (coun  NOT =  0) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

      *Subtest 3 
             MOVE 0 TO coun
             DISPLAY "SELECT COUNT(*) INTO :coun FROM STAFF"
             DISPLAY "WHERE USER LIKE 'CTS1%';"
      *  EXEC SQL SELECT COUNT(*)
      *    INTO   :coun
      *    FROM   STAFF
      *    WHERE  USER LIKE 'CTS1%';
             CALL "SUB5" USING SQLCODE SQLSTATE coun
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "coun should be 5; its value is ", coun
             if (coun  NOT =  5) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB6" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK

             if ( flag  =  1 ) then
               DISPLAY "       xts702.mco  *** pass *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7007','pass','MCO');
               CALL "SUB7" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY "       xts702.mco  *** fail *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7007','fail','MCO');
               CALL "SUB8" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "========================================"

      *  EXEC SQL COMMIT WORK;
             CALL "SUB9" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

      ******************** END TEST7007 ********************
      ******************** BEGIN TEST7008 ******************

             MOVE 1 TO flag
             DISPLAY "                  TEST7008 "
             DISPLAY "    LIKE with general char. value for pattern &
      -    " escape"
             DISPLAY "References:"
             DISPLAY "    8.5 FT.3   <pattern> format"
             DISPLAY "    8.5 FT.4   <escape character> format"
             DISPLAY "    8.5 LR.2.b Raising the rule that the pattern"
             DISPLAY "               shall be a <value specification>"
             DISPLAY "    8.5 LR.2.c Raising the rule that the escape
      -    " character"
             DISPLAY "               shall be a <value specification>"
             DISPLAY "    F#28       LIKE enhancements"
             DISPLAY "   - - - - - - - - - - - - - - - - - - -"

      *execute a series of select statements with LIKE 
      *predicates where the match pattern and/or escape 
      *value is a <general character value> 

      *Initialise error reporting variables 
             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *Subtest 1 
             MOVE 0 TO coun
             DISPLAY "SELECT COUNT(*) INTO :coun FROM STAFF"
             DISPLAY "WHERE EMPNAME LIKE EMPNAME;"
      *  EXEC SQL SELECT COUNT(*)
      *    INTO   :coun
      *    FROM   STAFF
      *    WHERE  EMPNAME LIKE EMPNAME;
             CALL "SUB10" USING SQLCODE SQLSTATE coun
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "coun should be 5; its value is ", coun
             if (coun  NOT =  5) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

      *Subtest 2 
             DISPLAY "INSERT INTO STAFF"
             DISPLAY "VALUES('E6','Theodora_FL',14,'T%S_FL%%%%%%%%%');"
      *  EXEC SQL INSERT INTO STAFF
      *    VALUES('E6','Theodora_FL',14,'T%S_FL%%%%%%%%%');
             CALL "SUB11" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             MOVE 0 TO coun
             DISPLAY "SELECT COUNT(*) INTO :coun FROM STAFF WHERE"
             DISPLAY "EMPNAME LIKE CITY ESCAPE 'S';"
      *  EXEC SQL SELECT COUNT(*)
      *    INTO   :coun
      *    FROM   STAFF
      *    WHERE  EMPNAME LIKE CITY ESCAPE 'S';
             CALL "SUB12" USING SQLCODE SQLSTATE coun
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "coun should be 1; its value is ", coun
             if (coun  NOT =  1) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

      *Subtest 3 
             DISPLAY "DELETE FROM STAFF;"
      *  EXEC SQL DELETE FROM STAFF;
             CALL "SUB13" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO STAFF"
             DISPLAY "VALUES('S','Dana%ELFT',14,'D%S%%%%%%%%%%%%');"
      *  EXEC SQL INSERT INTO STAFF
      *    VALUES('S','Dana%ELFT',14,'D%S%%%%%%%%%%%%');
             CALL "SUB14" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             MOVE 0 TO coun
             DISPLAY "SELECT COUNT(*) INTO :coun FROM STAFF WHERE"
             DISPLAY "EMPNAME LIKE CITY ESCAPE EMPNUM;"
      *  EXEC SQL SELECT COUNT(*)
      *    INTO   :coun
      *    FROM   STAFF
      *    WHERE  EMPNAME LIKE CITY ESCAPE EMPNUM;
             CALL "SUB15" USING SQLCODE SQLSTATE coun
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "coun should be 1; its value is ", coun
             if (coun  NOT =  1) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

      *Subtest 4 
             MOVE 0 TO coun
             DISPLAY "SELECT COUNT(*) INTO :coun FROM STAFF WHERE"
             DISPLAY "'Del%' LIKE CITY ESCAPE EMPNUM;"
      *  EXEC SQL SELECT COUNT(*)
      *    INTO   :coun
      *    FROM   STAFF
      *    WHERE  'Del%' LIKE CITY ESCAPE EMPNUM;
             CALL "SUB16" USING SQLCODE SQLSTATE coun
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "coun should be 1; its value is ", coun
             if (coun  NOT =  1) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB17" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY "       xts702.mco  *** pass *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7008','pass','MCO');
               CALL "SUB18" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY "       xts702.mco  *** fail *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7008','fail','MCO');
               CALL "SUB19" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "========================================"

      *  EXEC SQL COMMIT WORK;
             CALL "SUB20" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD


      ******************** END TEST7008 ********************
      ******************** BEGIN TEST7009 *******************
             MOVE 1 TO flag

             DISPLAY "                  TEST7009 "
             DISPLAY "    LIKE with zero-length escape"
             DISPLAY "References:"
             DISPLAY "    8.5 FT.4     <escape character> format"
             DISPLAY "    8.5 GR.3.a.i The length of the string in"
             DISPLAY "                 <escape character> should be 1"
             DISPLAY "    8.5 LR.2.c   Raising the rule that the escape"
             DISPLAY "                 character shall be a <value
      -    " specification>"
             DISPLAY "    6.7 FT.7     <trim function>"
             DISPLAY "    F#28         LIKE enhancements"
             DISPLAY "    F#7          TRIM support is required"
             DISPLAY "   - - - - - - - - - - - - - - - - - - -"

      *Initialise error reporting variables 
             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *execute a select where the length in characters of the
      *result of the <character value expression> specified  
      *as the <escape character> in a like predicate is zero 
      *this should not succeed 

             DISPLAY "DELETE FROM STAFF;"
      *  EXEC SQL DELETE FROM STAFF;
             CALL "SUB21" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO STAFF"
             DISPLAY "VALUES('   ','Dana%ELFT',14,'D%0%%%%%%%%%%%%');"
      *  EXEC SQL INSERT INTO STAFF
      *    VALUES('   ','Dana%ELFT',14,'D%0%%%%%%%%%%%%');
             CALL "SUB22" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *this should not succeed 
             MOVE 10000 TO SQLCODE
             MOVE "xxxxx" TO SQLSTATE
             MOVE 99 TO coun
             DISPLAY "SELECT COUNT(*) INTO :coun FROM STAFF WHERE"
             DISPLAY "EMPNAME LIKE CITY ESCAPE TRIM(EMPNUM);"
      *  EXEC SQL SELECT COUNT(*)
      *    INTO   :coun
      *    FROM   STAFF
      *    WHERE  EMPNAME LIKE CITY ESCAPE TRIM(EMPNUM);
             CALL "SUB23" USING SQLCODE SQLSTATE coun
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 22019;its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "22019") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "22019"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB24" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY "       xts702.mco  *** pass *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7009','pass','MCO');
               CALL "SUB25" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY "       xts702.mco  *** fail *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7009','fail','MCO');
               CALL "SUB26" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "========================================"

      *  EXEC SQL COMMIT WORK;
             CALL "SUB27" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

      ******************** END TEST7009 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion. 
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined       
      *subclasses with 000.  This replacement equates valid     
      *implementation-defined subclasses with the 000 value     
      *expected by the test case; otherwise the test will fail. 
      *After calling NOSUBCLASS, NORMSQ will be tested          
      *                          SQLSTATE will be printed.      

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ 
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table 
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
           
      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def. 
      *Changed NORMSQ means implementation-defined subclass,    
      *so proceed to zero it out, if valid (0-9,A-Z)            
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ 
      *valid characters are 0-9, A-Z 
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
          
           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z 
      *examining position 5 of char array NORMSQ 
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
   
      *implementation-defined subclasses are allowed for warnings 
      *(class = 01).  These equate to successful completion 
      *SQLSTATE values of 00000. 
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2 

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.