Quellcode-Bibliothek

^© Kompilation durch diese Firma

[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]

Datei: nativeInst_riscv.cpp Sprache: C

/*
* Copyright (c) 1997, 2020, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2014, 2020, Red Hat Inc. All rights reserved.
* Copyright (c) 2020, 2022, Huawei Technologies Co., Ltd. All rights reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*
*/

#include "precompiled.hpp"
#include "asm/macroAssembler.hpp"
#include "code/compiledIC.hpp"
#include "memory/resourceArea.hpp"
#include "nativeInst_riscv.hpp"
#include "oops/oop.inline.hpp"
#include "runtime/handles.hpp"
#include "runtime/orderAccess.hpp"
#include "runtime/safepoint.hpp"
#include "runtime/sharedRuntime.hpp"
#include "runtime/stubRoutines.hpp"
#include "utilities/ostream.hpp"
#ifdef COMPILER1
#include "c1/c1_Runtime1.hpp"
#endif

Register NativeInstruction::extract_rs1(address instr) {
  assert_cond(instr != NULL);
  return as_Register(Assembler::extract(((unsigned*)instr)[0], 19, 15));
}

Register NativeInstruction::extract_rs2(address instr) {
  assert_cond(instr != NULL);
  return as_Register(Assembler::extract(((unsigned*)instr)[0], 24, 20));
}

Register NativeInstruction::extract_rd(address instr) {
  assert_cond(instr != NULL);
  return as_Register(Assembler::extract(((unsigned*)instr)[0], 11, 7));
}

uint32_t NativeInstruction::extract_opcode(address instr) {
  assert_cond(instr != NULL);
  return Assembler::extract(((unsigned*)instr)[0], 6, 0);
}

uint32_t NativeInstruction::extract_funct3(address instr) {
  assert_cond(instr != NULL);
  return Assembler::extract(((unsigned*)instr)[0], 14, 12);
}

bool NativeInstruction::is_pc_relative_at(address instr) {
  // auipc + jalr
  // auipc + addi
  // auipc + load
  // auipc + fload_load
  return (is_auipc_at(instr)) &&
         (is_addi_at(instr + instruction_size) ||
          is_jalr_at(instr + instruction_size) ||
          is_load_at(instr + instruction_size) ||
          is_float_load_at(instr + instruction_size)) &&
         check_pc_relative_data_dependency(instr);
}

// ie:ld(Rd, Label)
bool NativeInstruction::is_load_pc_relative_at(address instr) {
  return is_auipc_at(instr) && // auipc
         is_ld_at(instr + instruction_size) && // ld
         check_load_pc_relative_data_dependency(instr);
}

bool NativeInstruction::is_movptr_at(address instr) {
  return is_lui_at(instr) && // Lui
         is_addi_at(instr + instruction_size) && // Addi
         is_slli_shift_at(instr + instruction_size * 2, 11) && // Slli Rd, Rs, 11
         is_addi_at(instr + instruction_size * 3) && // Addi
         is_slli_shift_at(instr + instruction_size * 4, 6) && // Slli Rd, Rs, 6
         (is_addi_at(instr + instruction_size * 5) ||
          is_jalr_at(instr + instruction_size * 5) ||
          is_load_at(instr + instruction_size * 5)) && // Addi/Jalr/Load
         check_movptr_data_dependency(instr);
}

bool NativeInstruction::is_li32_at(address instr) {
  return is_lui_at(instr) && // lui
         is_addiw_at(instr + instruction_size) && // addiw
         check_li32_data_dependency(instr);
}

bool NativeInstruction::is_li64_at(address instr) {
  return is_lui_at(instr) && // lui
         is_addi_at(instr + instruction_size) && // addi
         is_slli_shift_at(instr + instruction_size * 2, 12) &&  // Slli Rd, Rs, 12
         is_addi_at(instr + instruction_size * 3) && // addi
         is_slli_shift_at(instr + instruction_size * 4, 12) &&  // Slli Rd, Rs, 12
         is_addi_at(instr + instruction_size * 5) && // addi
         is_slli_shift_at(instr + instruction_size * 6, 8) &&   // Slli Rd, Rs, 8
         is_addi_at(instr + instruction_size * 7) && // addi
         check_li64_data_dependency(instr);
}

void NativeCall::verify() {
  assert(NativeCall::is_call_at((address)this), "unexpected code at call site");
}

address NativeCall::destination() const {
  address addr = (address)this;
  assert(NativeInstruction::is_jal_at(instruction_address()), "inst must be jal.");
  address destination = MacroAssembler::target_addr_for_insn(instruction_address());

  // Do we use a trampoline stub for this call?
  CodeBlob* cb = CodeCache::find_blob(addr);
  assert(cb && cb->is_nmethod(), "sanity");
  nmethod *nm = (nmethod *)cb;
  if (nm != NULL && nm->stub_contains(destination) && is_NativeCallTrampolineStub_at(destination)) {
    // Yes we do, so get the destination from the trampoline stub.
    const address trampoline_stub_addr = destination;
    destination = nativeCallTrampolineStub_at(trampoline_stub_addr)->destination();
  }

  return destination;
}

// Similar to replace_mt_safe, but just changes the destination. The
// important thing is that free-running threads are able to execute this
// call instruction at all times.
//
// Used in the runtime linkage of calls; see class CompiledIC.
//
// Add parameter assert_lock to switch off assertion
// during code generation, where no patching lock is needed.
void NativeCall::set_destination_mt_safe(address dest, bool assert_lock) {
  assert(!assert_lock ||
         (Patching_lock->is_locked() || SafepointSynchronize::is_at_safepoint()) ||
         CompiledICLocker::is_safe(addr_at(0)),
         "concurrent code patching");

  ResourceMark rm;
  address addr_call = addr_at(0);
  assert(NativeCall::is_call_at(addr_call), "unexpected code at call site");

  // Patch the constant in the call's trampoline stub.
  address trampoline_stub_addr = get_trampoline();
  if (trampoline_stub_addr != NULL) {
    assert (!is_NativeCallTrampolineStub_at(dest), "chained trampolines");
    nativeCallTrampolineStub_at(trampoline_stub_addr)->set_destination(dest);
  }

  // Patch the call.
  if (Assembler::reachable_from_branch_at(addr_call, dest)) {
    set_destination(dest);
  } else {
    assert (trampoline_stub_addr != NULL, "we need a trampoline");
    set_destination(trampoline_stub_addr);
  }

  ICache::invalidate_range(addr_call, instruction_size);
}

address NativeCall::get_trampoline() {
  address call_addr = addr_at(0);

  CodeBlob *code = CodeCache::find_blob(call_addr);
  assert(code != NULL, "Could not find the containing code blob");

  address jal_destination = MacroAssembler::pd_call_destination(call_addr);
  if (code != NULL && code->contains(jal_destination) && is_NativeCallTrampolineStub_at(jal_destination)) {
    return jal_destination;
  }

  if (code != NULL && code->is_nmethod()) {
    return trampoline_stub_Relocation::get_trampoline_for(call_addr, (nmethod*)code);
  }

  return NULL;
}

// Inserts a native call instruction at a given pc
void NativeCall::insert(address code_pos, address entry) { Unimplemented(); }

//-------------------------------------------------------------------

void NativeMovConstReg::verify() {
  if (!(nativeInstruction_at(instruction_address())->is_movptr() ||
        is_auipc_at(instruction_address()))) {
    fatal("should be MOVPTR or AUIPC");
  }
}

intptr_t NativeMovConstReg::data() const {
  address addr = MacroAssembler::target_addr_for_insn(instruction_address());
  if (maybe_cpool_ref(instruction_address())) {
    return *(intptr_t*)addr;
  } else {
    return (intptr_t)addr;
  }
}

void NativeMovConstReg::set_data(intptr_t x) {
  if (maybe_cpool_ref(instruction_address())) {
    address addr = MacroAssembler::target_addr_for_insn(instruction_address());
    *(intptr_t*)addr = x;
  } else {
    // Store x into the instruction stream.
    MacroAssembler::pd_patch_instruction_size(instruction_address(), (address)x);
    ICache::invalidate_range(instruction_address(), movptr_instruction_size);
  }

  // Find and replace the oop/metadata corresponding to this
  // instruction in oops section.
  CodeBlob* cb = CodeCache::find_blob(instruction_address());
  nmethod* nm = cb->as_nmethod_or_null();
  if (nm != NULL) {
    RelocIterator iter(nm, instruction_address(), next_instruction_address());
    while (iter.next()) {
      if (iter.type() == relocInfo::oop_type) {
        oop* oop_addr = iter.oop_reloc()->oop_addr();
        *oop_addr = cast_to_oop(x);
        break;
      } else if (iter.type() == relocInfo::metadata_type) {
        Metadata** metadata_addr = iter.metadata_reloc()->metadata_addr();
        *metadata_addr = (Metadata*)x;
        break;
      }
    }
  }
}

void NativeMovConstReg::print() {
  tty->print_cr(PTR_FORMAT ": mov reg, " INTPTR_FORMAT,
                p2i(instruction_address()), data());
}

//-------------------------------------------------------------------

int NativeMovRegMem::offset() const  {
  Unimplemented();
  return 0;
}

void NativeMovRegMem::set_offset(int x) { Unimplemented(); }

void NativeMovRegMem::verify() {
  Unimplemented();
}

//--------------------------------------------------------------------------------

void NativeJump::verify() { }

void NativeJump::check_verified_entry_alignment(address entry, address verified_entry) {
  // Patching to not_entrant can happen while activations of the method are
  // in use. The patching in that instance must happen only when certain
  // alignment restrictions are true. These guarantees check those
  // conditions.

  // Must be 4 bytes aligned
  MacroAssembler::assert_alignment(verified_entry);
}

address NativeJump::jump_destination() const {
  address dest = MacroAssembler::target_addr_for_insn(instruction_address());

  // We use jump to self as the unresolved address which the inline
  // cache code (and relocs) know about
  // As a special case we also use sequence movptr(r,0), jalr(r,0)
  // i.e. jump to 0 when we need leave space for a wide immediate
  // load

  // return -1 if jump to self or to 0
  if ((dest == (address) this) || dest == 0) {
    dest = (address) -1;
  }

  return dest;
};

void NativeJump::set_jump_destination(address dest) {
  // We use jump to self as the unresolved address which the inline
  // cache code (and relocs) know about
  if (dest == (address) -1)
    dest = instruction_address();

  MacroAssembler::pd_patch_instruction(instruction_address(), dest);
  ICache::invalidate_range(instruction_address(), instruction_size);
}

//-------------------------------------------------------------------

address NativeGeneralJump::jump_destination() const {
  NativeMovConstReg* move = nativeMovConstReg_at(instruction_address());
  address dest = (address) move->data();

  // We use jump to self as the unresolved address which the inline
  // cache code (and relocs) know about
  // As a special case we also use jump to 0 when first generating
  // a general jump

  // return -1 if jump to self or to 0
  if ((dest == (address) this) || dest == 0) {
    dest = (address) -1;
  }

  return dest;
}

//-------------------------------------------------------------------

bool NativeInstruction::is_safepoint_poll() {
  return is_lwu_to_zr(address(this));
}

bool NativeInstruction::is_lwu_to_zr(address instr) {
  assert_cond(instr != NULL);
  return (extract_opcode(instr) == 0b0000011 &&
          extract_funct3(instr) == 0b110 &&
          extract_rd(instr) == zr);         // zr
}

// A 16-bit instruction with all bits ones is permanently reserved as an illegal instruction.
bool NativeInstruction::is_sigill_not_entrant() {
  // jvmci
  return uint_at(0) == 0xffffffff;
}

void NativeIllegalInstruction::insert(address code_pos) {
  assert_cond(code_pos != NULL);
  *(juint*)code_pos = 0xffffffff; // all bits ones is permanently reserved as an illegal instruction
}

bool NativeInstruction::is_stop() {
  return uint_at(0) == 0xc0101073; // an illegal instruction, 'csrrw x0, time, x0'
}

//-------------------------------------------------------------------

// MT-safe inserting of a jump over a jump or a nop (used by
// nmethod::make_not_entrant)

void NativeJump::patch_verified_entry(address entry, address verified_entry, address dest) {

  assert(dest == SharedRuntime::get_handle_wrong_method_stub(), "expected fixed destination of patch");

  assert(nativeInstruction_at(verified_entry)->is_jump_or_nop() ||
         nativeInstruction_at(verified_entry)->is_sigill_not_entrant(),
         "riscv cannot replace non-jump with jump");

  check_verified_entry_alignment(entry, verified_entry);

  // Patch this nmethod atomically.
  if (Assembler::reachable_from_branch_at(verified_entry, dest)) {
    ptrdiff_t offset = dest - verified_entry;
    guarantee(is_imm_in_range(offset, 20, 1), "offset is too large to be patched in one jal insrusction."); // 1M

    uint32_t insn = 0;
    address pInsn = (address)&insn;
    Assembler::patch(pInsn, 31, 31, (offset >> 20) & 0x1);
    Assembler::patch(pInsn, 30, 21, (offset >> 1) & 0x3ff);
    Assembler::patch(pInsn, 20, 20, (offset >> 11) & 0x1);
    Assembler::patch(pInsn, 19, 12, (offset >> 12) & 0xff);
    Assembler::patch(pInsn, 11, 7, 0); // zero, no link jump
    Assembler::patch(pInsn, 6, 0, 0b1101111); // j, (jal x0 offset)
    *(unsigned int*)verified_entry = insn;
  } else {
    // We use an illegal instruction for marking a method as
    // not_entrant.
    NativeIllegalInstruction::insert(verified_entry);
  }

  ICache::invalidate_range(verified_entry, instruction_size);
}

void NativeGeneralJump::insert_unconditional(address code_pos, address entry) {
  CodeBuffer cb(code_pos, instruction_size);
  MacroAssembler a(&cb);
  Assembler::IncompressibleRegion ir(&a);  // Fixed length: see NativeGeneralJump::get_instruction_size()

  int32_t offset = 0;
  a.movptr(t0, entry, offset); // lui, addi, slli, addi, slli
  a.jalr(x0, t0, offset); // jalr

  ICache::invalidate_range(code_pos, instruction_size);
}

// MT-safe patching of a long jump instruction.
void NativeGeneralJump::replace_mt_safe(address instr_addr, address code_buffer) {
  ShouldNotCallThis();
}

address NativeCallTrampolineStub::destination(nmethod *nm) const {
  return ptr_at(data_offset);
}

void NativeCallTrampolineStub::set_destination(address new_destination) {
  set_ptr_at(data_offset, new_destination);
  OrderAccess::release();
}

uint32_t NativeMembar::get_kind() {
  uint32_t insn = uint_at(0);

  uint32_t predecessor = Assembler::extract(insn, 27, 24);
  uint32_t successor = Assembler::extract(insn, 23, 20);

  return MacroAssembler::pred_succ_to_membar_mask(predecessor, successor);
}

void NativeMembar::set_kind(uint32_t order_kind) {
  uint32_t predecessor = 0;
  uint32_t successor = 0;

  MacroAssembler::membar_mask_to_pred_succ(order_kind, predecessor, successor);

  uint32_t insn = uint_at(0);
  address pInsn = (address) &insn;
  Assembler::patch(pInsn, 27, 24, predecessor);
  Assembler::patch(pInsn, 23, 20, successor);

  address membar = addr_at(0);
  *(unsigned int*) membar = insn;
}

void NativePostCallNop::make_deopt() {
  MacroAssembler::assert_alignment(addr_at(0));
  NativeDeoptInstruction::insert(addr_at(0));
}

int NativePostCallNop::displacement() const {
  // Discard the high 32 bits
  return (int)(intptr_t)MacroAssembler::get_target_of_li32(addr_at(4));
}

void NativePostCallNop::patch(jint diff) {
  assert(diff != 0, "must be");
  assert(is_lui_to_zr_at(addr_at(4)) && is_addiw_to_zr_at(addr_at(8)), "must be");

  MacroAssembler::patch_imm_in_li32(addr_at(4), diff);
}

void NativeDeoptInstruction::verify() {
}

// Inserts an undefined instruction at a given pc
void NativeDeoptInstruction::insert(address code_pos) {
  // 0xc0201073 encodes CSRRW x0, instret, x0
  uint32_t insn = 0xc0201073;
  uint32_t *pos = (uint32_t *) code_pos;
  *pos = insn;
  ICache::invalidate_range(code_pos, 4);
}

¤ Dauer der Verarbeitung: 0.21 Sekunden (vorverarbeitet) ¤

Download des Quellennavigators
Download des sprechenden Kalenders
in der Quellcodebibliothek suchen

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.